| /* |
| * Description: |
| * Device Driver for the Infineon Technologies |
| * SLD 9630 TT 1.1 and SLB 9635 TT 1.2 Trusted Platform Module |
| * Specifications at www.trustedcomputinggroup.org |
| * |
| * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> |
| * Sirrix AG - security technologies, http://www.sirrix.com and |
| * Applied Data Security Group, Ruhr-University Bochum, Germany |
| * Project-Homepage: http://www.prosec.rub.de/tpm |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2 of the |
| * License. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/pnp.h> |
| #include "tpm.h" |
| |
| /* Infineon specific definitions */ |
| /* maximum number of WTX-packages */ |
| #define TPM_MAX_WTX_PACKAGES 50 |
| /* msleep-Time for WTX-packages */ |
| #define TPM_WTX_MSLEEP_TIME 20 |
| /* msleep-Time --> Interval to check status register */ |
| #define TPM_MSLEEP_TIME 3 |
| /* gives number of max. msleep()-calls before throwing timeout */ |
| #define TPM_MAX_TRIES 5000 |
| #define TPM_INFINEON_DEV_VEN_VALUE 0x15D1 |
| |
| #define TPM_INF_IO_PORT 0x0 |
| #define TPM_INF_IO_MEM 0x1 |
| |
| #define TPM_INF_ADDR 0x0 |
| #define TPM_INF_DATA 0x1 |
| |
| struct tpm_inf_dev { |
| int iotype; |
| |
| void __iomem *mem_base; /* MMIO ioremap'd addr */ |
| unsigned long map_base; /* phys MMIO base */ |
| unsigned long map_size; /* MMIO region size */ |
| unsigned int index_off; /* index register offset */ |
| |
| unsigned int data_regs; /* Data registers */ |
| unsigned int data_size; |
| |
| unsigned int config_port; /* IO Port config index reg */ |
| unsigned int config_size; |
| }; |
| |
| static struct tpm_inf_dev tpm_dev; |
| |
| static inline void tpm_data_out(unsigned char data, unsigned char offset) |
| { |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) |
| outb(data, tpm_dev.data_regs + offset); |
| else |
| writeb(data, tpm_dev.mem_base + tpm_dev.data_regs + offset); |
| } |
| |
| static inline unsigned char tpm_data_in(unsigned char offset) |
| { |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) |
| return inb(tpm_dev.data_regs + offset); |
| else |
| return readb(tpm_dev.mem_base + tpm_dev.data_regs + offset); |
| } |
| |
| static inline void tpm_config_out(unsigned char data, unsigned char offset) |
| { |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) |
| outb(data, tpm_dev.config_port + offset); |
| else |
| writeb(data, tpm_dev.mem_base + tpm_dev.index_off + offset); |
| } |
| |
| static inline unsigned char tpm_config_in(unsigned char offset) |
| { |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) |
| return inb(tpm_dev.config_port + offset); |
| else |
| return readb(tpm_dev.mem_base + tpm_dev.index_off + offset); |
| } |
| |
| /* TPM header definitions */ |
| enum infineon_tpm_header { |
| TPM_VL_VER = 0x01, |
| TPM_VL_CHANNEL_CONTROL = 0x07, |
| TPM_VL_CHANNEL_PERSONALISATION = 0x0A, |
| TPM_VL_CHANNEL_TPM = 0x0B, |
| TPM_VL_CONTROL = 0x00, |
| TPM_INF_NAK = 0x15, |
| TPM_CTRL_WTX = 0x10, |
| TPM_CTRL_WTX_ABORT = 0x18, |
| TPM_CTRL_WTX_ABORT_ACK = 0x18, |
| TPM_CTRL_ERROR = 0x20, |
| TPM_CTRL_CHAININGACK = 0x40, |
| TPM_CTRL_CHAINING = 0x80, |
| TPM_CTRL_DATA = 0x04, |
| TPM_CTRL_DATA_CHA = 0x84, |
| TPM_CTRL_DATA_CHA_ACK = 0xC4 |
| }; |
| |
| enum infineon_tpm_register { |
| WRFIFO = 0x00, |
| RDFIFO = 0x01, |
| STAT = 0x02, |
| CMD = 0x03 |
| }; |
| |
| enum infineon_tpm_command_bits { |
| CMD_DIS = 0x00, |
| CMD_LP = 0x01, |
| CMD_RES = 0x02, |
| CMD_IRQC = 0x06 |
| }; |
| |
| enum infineon_tpm_status_bits { |
| STAT_XFE = 0x00, |
| STAT_LPA = 0x01, |
| STAT_FOK = 0x02, |
| STAT_TOK = 0x03, |
| STAT_IRQA = 0x06, |
| STAT_RDA = 0x07 |
| }; |
| |
| /* some outgoing values */ |
| enum infineon_tpm_values { |
| CHIP_ID1 = 0x20, |
| CHIP_ID2 = 0x21, |
| TPM_DAR = 0x30, |
| RESET_LP_IRQC_DISABLE = 0x41, |
| ENABLE_REGISTER_PAIR = 0x55, |
| IOLIMH = 0x60, |
| IOLIML = 0x61, |
| DISABLE_REGISTER_PAIR = 0xAA, |
| IDVENL = 0xF1, |
| IDVENH = 0xF2, |
| IDPDL = 0xF3, |
| IDPDH = 0xF4 |
| }; |
| |
| static int number_of_wtx; |
| |
| static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo) |
| { |
| int status; |
| int check = 0; |
| int i; |
| |
| if (clear_wrfifo) { |
| for (i = 0; i < 4096; i++) { |
| status = tpm_data_in(WRFIFO); |
| if (status == 0xff) { |
| if (check == 5) |
| break; |
| else |
| check++; |
| } |
| } |
| } |
| /* Note: The values which are currently in the FIFO of the TPM |
| are thrown away since there is no usage for them. Usually, |
| this has nothing to say, since the TPM will give its answer |
| immediately or will be aborted anyway, so the data here is |
| usually garbage and useless. |
| We have to clean this, because the next communication with |
| the TPM would be rubbish, if there is still some old data |
| in the Read FIFO. |
| */ |
| i = 0; |
| do { |
| status = tpm_data_in(RDFIFO); |
| status = tpm_data_in(STAT); |
| i++; |
| if (i == TPM_MAX_TRIES) |
| return -EIO; |
| } while ((status & (1 << STAT_RDA)) != 0); |
| return 0; |
| } |
| |
| static int wait(struct tpm_chip *chip, int wait_for_bit) |
| { |
| int status; |
| int i; |
| for (i = 0; i < TPM_MAX_TRIES; i++) { |
| status = tpm_data_in(STAT); |
| /* check the status-register if wait_for_bit is set */ |
| if (status & 1 << wait_for_bit) |
| break; |
| msleep(TPM_MSLEEP_TIME); |
| } |
| if (i == TPM_MAX_TRIES) { /* timeout occurs */ |
| if (wait_for_bit == STAT_XFE) |
| dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n"); |
| if (wait_for_bit == STAT_RDA) |
| dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n"); |
| return -EIO; |
| } |
| return 0; |
| }; |
| |
| static void wait_and_send(struct tpm_chip *chip, u8 sendbyte) |
| { |
| wait(chip, STAT_XFE); |
| tpm_data_out(sendbyte, WRFIFO); |
| } |
| |
| /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more |
| calculation time, it sends a WTX-package, which has to be acknowledged |
| or aborted. This usually occurs if you are hammering the TPM with key |
| creation. Set the maximum number of WTX-packages in the definitions |
| above, if the number is reached, the waiting-time will be denied |
| and the TPM command has to be resend. |
| */ |
| |
| static void tpm_wtx(struct tpm_chip *chip) |
| { |
| number_of_wtx++; |
| dev_info(chip->dev, "Granting WTX (%02d / %02d)\n", |
| number_of_wtx, TPM_MAX_WTX_PACKAGES); |
| wait_and_send(chip, TPM_VL_VER); |
| wait_and_send(chip, TPM_CTRL_WTX); |
| wait_and_send(chip, 0x00); |
| wait_and_send(chip, 0x00); |
| msleep(TPM_WTX_MSLEEP_TIME); |
| } |
| |
| static void tpm_wtx_abort(struct tpm_chip *chip) |
| { |
| dev_info(chip->dev, "Aborting WTX\n"); |
| wait_and_send(chip, TPM_VL_VER); |
| wait_and_send(chip, TPM_CTRL_WTX_ABORT); |
| wait_and_send(chip, 0x00); |
| wait_and_send(chip, 0x00); |
| number_of_wtx = 0; |
| msleep(TPM_WTX_MSLEEP_TIME); |
| } |
| |
| static int tpm_inf_recv(struct tpm_chip *chip, u8 * buf, size_t count) |
| { |
| int i; |
| int ret; |
| u32 size = 0; |
| number_of_wtx = 0; |
| |
| recv_begin: |
| /* start receiving header */ |
| for (i = 0; i < 4; i++) { |
| ret = wait(chip, STAT_RDA); |
| if (ret) |
| return -EIO; |
| buf[i] = tpm_data_in(RDFIFO); |
| } |
| |
| if (buf[0] != TPM_VL_VER) { |
| dev_err(chip->dev, |
| "Wrong transport protocol implementation!\n"); |
| return -EIO; |
| } |
| |
| if (buf[1] == TPM_CTRL_DATA) { |
| /* size of the data received */ |
| size = ((buf[2] << 8) | buf[3]); |
| |
| for (i = 0; i < size; i++) { |
| wait(chip, STAT_RDA); |
| buf[i] = tpm_data_in(RDFIFO); |
| } |
| |
| if ((size == 0x6D00) && (buf[1] == 0x80)) { |
| dev_err(chip->dev, "Error handling on vendor layer!\n"); |
| return -EIO; |
| } |
| |
| for (i = 0; i < size; i++) |
| buf[i] = buf[i + 6]; |
| |
| size = size - 6; |
| return size; |
| } |
| |
| if (buf[1] == TPM_CTRL_WTX) { |
| dev_info(chip->dev, "WTX-package received\n"); |
| if (number_of_wtx < TPM_MAX_WTX_PACKAGES) { |
| tpm_wtx(chip); |
| goto recv_begin; |
| } else { |
| tpm_wtx_abort(chip); |
| goto recv_begin; |
| } |
| } |
| |
| if (buf[1] == TPM_CTRL_WTX_ABORT_ACK) { |
| dev_info(chip->dev, "WTX-abort acknowledged\n"); |
| return size; |
| } |
| |
| if (buf[1] == TPM_CTRL_ERROR) { |
| dev_err(chip->dev, "ERROR-package received:\n"); |
| if (buf[4] == TPM_INF_NAK) |
| dev_err(chip->dev, |
| "-> Negative acknowledgement" |
| " - retransmit command!\n"); |
| return -EIO; |
| } |
| return -EIO; |
| } |
| |
| static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count) |
| { |
| int i; |
| int ret; |
| u8 count_high, count_low, count_4, count_3, count_2, count_1; |
| |
| /* Disabling Reset, LP and IRQC */ |
| tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); |
| |
| ret = empty_fifo(chip, 1); |
| if (ret) { |
| dev_err(chip->dev, "Timeout while clearing FIFO\n"); |
| return -EIO; |
| } |
| |
| ret = wait(chip, STAT_XFE); |
| if (ret) |
| return -EIO; |
| |
| count_4 = (count & 0xff000000) >> 24; |
| count_3 = (count & 0x00ff0000) >> 16; |
| count_2 = (count & 0x0000ff00) >> 8; |
| count_1 = (count & 0x000000ff); |
| count_high = ((count + 6) & 0xffffff00) >> 8; |
| count_low = ((count + 6) & 0x000000ff); |
| |
| /* Sending Header */ |
| wait_and_send(chip, TPM_VL_VER); |
| wait_and_send(chip, TPM_CTRL_DATA); |
| wait_and_send(chip, count_high); |
| wait_and_send(chip, count_low); |
| |
| /* Sending Data Header */ |
| wait_and_send(chip, TPM_VL_VER); |
| wait_and_send(chip, TPM_VL_CHANNEL_TPM); |
| wait_and_send(chip, count_4); |
| wait_and_send(chip, count_3); |
| wait_and_send(chip, count_2); |
| wait_and_send(chip, count_1); |
| |
| /* Sending Data */ |
| for (i = 0; i < count; i++) { |
| wait_and_send(chip, buf[i]); |
| } |
| return count; |
| } |
| |
| static void tpm_inf_cancel(struct tpm_chip *chip) |
| { |
| /* |
| Since we are using the legacy mode to communicate |
| with the TPM, we have no cancel functions, but have |
| a workaround for interrupting the TPM through WTX. |
| */ |
| } |
| |
| static u8 tpm_inf_status(struct tpm_chip *chip) |
| { |
| return tpm_data_in(STAT); |
| } |
| |
| static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); |
| static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL); |
| static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps, NULL); |
| static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel); |
| |
| static struct attribute *inf_attrs[] = { |
| &dev_attr_pubek.attr, |
| &dev_attr_pcrs.attr, |
| &dev_attr_caps.attr, |
| &dev_attr_cancel.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group inf_attr_grp = {.attrs = inf_attrs }; |
| |
| static const struct file_operations inf_ops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .open = tpm_open, |
| .read = tpm_read, |
| .write = tpm_write, |
| .release = tpm_release, |
| }; |
| |
| static const struct tpm_vendor_specific tpm_inf = { |
| .recv = tpm_inf_recv, |
| .send = tpm_inf_send, |
| .cancel = tpm_inf_cancel, |
| .status = tpm_inf_status, |
| .req_complete_mask = 0, |
| .req_complete_val = 0, |
| .attr_group = &inf_attr_grp, |
| .miscdev = {.fops = &inf_ops,}, |
| }; |
| |
| static const struct pnp_device_id tpm_pnp_tbl[] = { |
| /* Infineon TPMs */ |
| {"IFX0101", 0}, |
| {"IFX0102", 0}, |
| {"", 0} |
| }; |
| |
| MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl); |
| |
| static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, |
| const struct pnp_device_id *dev_id) |
| { |
| int rc = 0; |
| u8 iol, ioh; |
| int vendorid[2]; |
| int version[2]; |
| int productid[2]; |
| char chipname[20]; |
| struct tpm_chip *chip; |
| |
| /* read IO-ports through PnP */ |
| if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && |
| !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { |
| |
| tpm_dev.iotype = TPM_INF_IO_PORT; |
| |
| tpm_dev.config_port = pnp_port_start(dev, 0); |
| tpm_dev.config_size = pnp_port_len(dev, 0); |
| tpm_dev.data_regs = pnp_port_start(dev, 1); |
| tpm_dev.data_size = pnp_port_len(dev, 1); |
| if ((tpm_dev.data_size < 4) || (tpm_dev.config_size < 2)) { |
| rc = -EINVAL; |
| goto err_last; |
| } |
| dev_info(&dev->dev, "Found %s with ID %s\n", |
| dev->name, dev_id->id); |
| if (!((tpm_dev.data_regs >> 8) & 0xff)) { |
| rc = -EINVAL; |
| goto err_last; |
| } |
| /* publish my base address and request region */ |
| if (request_region(tpm_dev.data_regs, tpm_dev.data_size, |
| "tpm_infineon0") == NULL) { |
| rc = -EINVAL; |
| goto err_last; |
| } |
| if (request_region(tpm_dev.config_port, tpm_dev.config_size, |
| "tpm_infineon0") == NULL) { |
| release_region(tpm_dev.data_regs, tpm_dev.data_size); |
| rc = -EINVAL; |
| goto err_last; |
| } |
| } else if (pnp_mem_valid(dev, 0) && |
| !(pnp_mem_flags(dev, 0) & IORESOURCE_DISABLED)) { |
| |
| tpm_dev.iotype = TPM_INF_IO_MEM; |
| |
| tpm_dev.map_base = pnp_mem_start(dev, 0); |
| tpm_dev.map_size = pnp_mem_len(dev, 0); |
| |
| dev_info(&dev->dev, "Found %s with ID %s\n", |
| dev->name, dev_id->id); |
| |
| /* publish my base address and request region */ |
| if (request_mem_region(tpm_dev.map_base, tpm_dev.map_size, |
| "tpm_infineon0") == NULL) { |
| rc = -EINVAL; |
| goto err_last; |
| } |
| |
| tpm_dev.mem_base = ioremap(tpm_dev.map_base, tpm_dev.map_size); |
| if (tpm_dev.mem_base == NULL) { |
| release_mem_region(tpm_dev.map_base, tpm_dev.map_size); |
| rc = -EINVAL; |
| goto err_last; |
| } |
| |
| /* |
| * The only known MMIO based Infineon TPM system provides |
| * a single large mem region with the device config |
| * registers at the default TPM_ADDR. The data registers |
| * seem like they could be placed anywhere within the MMIO |
| * region, but lets just put them at zero offset. |
| */ |
| tpm_dev.index_off = TPM_ADDR; |
| tpm_dev.data_regs = 0x0; |
| } else { |
| rc = -EINVAL; |
| goto err_last; |
| } |
| |
| /* query chip for its vendor, its version number a.s.o. */ |
| tpm_config_out(ENABLE_REGISTER_PAIR, TPM_INF_ADDR); |
| tpm_config_out(IDVENL, TPM_INF_ADDR); |
| vendorid[1] = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(IDVENH, TPM_INF_ADDR); |
| vendorid[0] = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(IDPDL, TPM_INF_ADDR); |
| productid[1] = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(IDPDH, TPM_INF_ADDR); |
| productid[0] = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(CHIP_ID1, TPM_INF_ADDR); |
| version[1] = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(CHIP_ID2, TPM_INF_ADDR); |
| version[0] = tpm_config_in(TPM_INF_DATA); |
| |
| switch ((productid[0] << 8) | productid[1]) { |
| case 6: |
| snprintf(chipname, sizeof(chipname), " (SLD 9630 TT 1.1)"); |
| break; |
| case 11: |
| snprintf(chipname, sizeof(chipname), " (SLB 9635 TT 1.2)"); |
| break; |
| default: |
| snprintf(chipname, sizeof(chipname), " (unknown chip)"); |
| break; |
| } |
| |
| if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { |
| |
| /* configure TPM with IO-ports */ |
| tpm_config_out(IOLIMH, TPM_INF_ADDR); |
| tpm_config_out((tpm_dev.data_regs >> 8) & 0xff, TPM_INF_DATA); |
| tpm_config_out(IOLIML, TPM_INF_ADDR); |
| tpm_config_out((tpm_dev.data_regs & 0xff), TPM_INF_DATA); |
| |
| /* control if IO-ports are set correctly */ |
| tpm_config_out(IOLIMH, TPM_INF_ADDR); |
| ioh = tpm_config_in(TPM_INF_DATA); |
| tpm_config_out(IOLIML, TPM_INF_ADDR); |
| iol = tpm_config_in(TPM_INF_DATA); |
| |
| if ((ioh << 8 | iol) != tpm_dev.data_regs) { |
| dev_err(&dev->dev, |
| "Could not set IO-data registers to 0x%x\n", |
| tpm_dev.data_regs); |
| rc = -EIO; |
| goto err_release_region; |
| } |
| |
| /* activate register */ |
| tpm_config_out(TPM_DAR, TPM_INF_ADDR); |
| tpm_config_out(0x01, TPM_INF_DATA); |
| tpm_config_out(DISABLE_REGISTER_PAIR, TPM_INF_ADDR); |
| |
| /* disable RESET, LP and IRQC */ |
| tpm_data_out(RESET_LP_IRQC_DISABLE, CMD); |
| |
| /* Finally, we're done, print some infos */ |
| dev_info(&dev->dev, "TPM found: " |
| "config base 0x%lx, " |
| "data base 0x%lx, " |
| "chip version 0x%02x%02x, " |
| "vendor id 0x%x%x (Infineon), " |
| "product id 0x%02x%02x" |
| "%s\n", |
| tpm_dev.iotype == TPM_INF_IO_PORT ? |
| tpm_dev.config_port : |
| tpm_dev.map_base + tpm_dev.index_off, |
| tpm_dev.iotype == TPM_INF_IO_PORT ? |
| tpm_dev.data_regs : |
| tpm_dev.map_base + tpm_dev.data_regs, |
| version[0], version[1], |
| vendorid[0], vendorid[1], |
| productid[0], productid[1], chipname); |
| |
| if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) |
| goto err_release_region; |
| |
| return 0; |
| } else { |
| rc = -ENODEV; |
| goto err_release_region; |
| } |
| |
| err_release_region: |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) { |
| release_region(tpm_dev.data_regs, tpm_dev.data_size); |
| release_region(tpm_dev.config_port, tpm_dev.config_size); |
| } else { |
| iounmap(tpm_dev.mem_base); |
| release_mem_region(tpm_dev.map_base, tpm_dev.map_size); |
| } |
| |
| err_last: |
| return rc; |
| } |
| |
| static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) |
| { |
| struct tpm_chip *chip = pnp_get_drvdata(dev); |
| |
| if (chip) { |
| if (tpm_dev.iotype == TPM_INF_IO_PORT) { |
| release_region(tpm_dev.data_regs, tpm_dev.data_size); |
| release_region(tpm_dev.config_port, |
| tpm_dev.config_size); |
| } else { |
| iounmap(tpm_dev.mem_base); |
| release_mem_region(tpm_dev.map_base, tpm_dev.map_size); |
| } |
| tpm_remove_hardware(chip->dev); |
| } |
| } |
| |
| static struct pnp_driver tpm_inf_pnp = { |
| .name = "tpm_inf_pnp", |
| .driver = { |
| .owner = THIS_MODULE, |
| .suspend = tpm_pm_suspend, |
| .resume = tpm_pm_resume, |
| }, |
| .id_table = tpm_pnp_tbl, |
| .probe = tpm_inf_pnp_probe, |
| .remove = __devexit_p(tpm_inf_pnp_remove), |
| }; |
| |
| static int __init init_inf(void) |
| { |
| return pnp_register_driver(&tpm_inf_pnp); |
| } |
| |
| static void __exit cleanup_inf(void) |
| { |
| pnp_unregister_driver(&tpm_inf_pnp); |
| } |
| |
| module_init(init_inf); |
| module_exit(cleanup_inf); |
| |
| MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); |
| MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); |
| MODULE_VERSION("1.9"); |
| MODULE_LICENSE("GPL"); |