| /* Copyright (c) 2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/termios.h> |
| #include <linux/debugfs.h> |
| #include <linux/bitops.h> |
| #include <linux/termios.h> |
| #include <mach/usb_bridge.h> |
| #include <mach/usb_gadget_xport.h> |
| |
| /* from cdc-acm.h */ |
| #define ACM_CTRL_RTS (1 << 1) /* unused with full duplex */ |
| #define ACM_CTRL_DTR (1 << 0) /* host is ready for data r/w */ |
| #define ACM_CTRL_OVERRUN (1 << 6) |
| #define ACM_CTRL_PARITY (1 << 5) |
| #define ACM_CTRL_FRAMING (1 << 4) |
| #define ACM_CTRL_RI (1 << 3) |
| #define ACM_CTRL_BRK (1 << 2) |
| #define ACM_CTRL_DSR (1 << 1) |
| #define ACM_CTRL_DCD (1 << 0) |
| |
| |
| static unsigned int no_ctrl_ports; |
| |
| static const char *ctrl_bridge_names[] = { |
| "dun_ctrl_hsic0", |
| "rmnet_ctrl_hsic0" |
| }; |
| |
| #define CTRL_BRIDGE_NAME_MAX_LEN 20 |
| #define READ_BUF_LEN 1024 |
| |
| #define CH_OPENED 0 |
| #define CH_READY 1 |
| |
| struct gctrl_port { |
| /* port */ |
| unsigned port_num; |
| |
| /* gadget */ |
| spinlock_t port_lock; |
| void *port_usb; |
| |
| /* work queue*/ |
| struct workqueue_struct *wq; |
| struct work_struct connect_w; |
| struct work_struct disconnect_w; |
| |
| enum gadget_type gtype; |
| |
| /*ctrl pkt response cb*/ |
| int (*send_cpkt_response)(void *g, void *buf, size_t len); |
| |
| struct bridge brdg; |
| |
| /* bridge status */ |
| unsigned long bridge_sts; |
| |
| /* control bits */ |
| unsigned cbits_tomodem; |
| unsigned cbits_tohost; |
| |
| /* counters */ |
| unsigned long to_modem; |
| unsigned long to_host; |
| unsigned long drp_cpkt_cnt; |
| }; |
| |
| static struct { |
| struct gctrl_port *port; |
| struct platform_driver pdrv; |
| } gctrl_ports[NUM_PORTS]; |
| |
| static int ghsic_ctrl_receive(void *dev, void *buf, size_t actual) |
| { |
| struct gctrl_port *port = dev; |
| int retval = 0; |
| |
| pr_debug_ratelimited("%s: read complete bytes read: %d\n", |
| __func__, actual); |
| |
| /* send it to USB here */ |
| if (port && port->send_cpkt_response) { |
| retval = port->send_cpkt_response(port->port_usb, buf, actual); |
| port->to_host++; |
| } |
| |
| return retval; |
| } |
| |
| static int |
| ghsic_send_cpkt_tomodem(u8 portno, void *buf, size_t len) |
| { |
| void *cbuf; |
| struct gctrl_port *port; |
| |
| if (portno >= no_ctrl_ports) { |
| pr_err("%s: Invalid portno#%d\n", __func__, portno); |
| return -ENODEV; |
| } |
| |
| port = gctrl_ports[portno].port; |
| if (!port) { |
| pr_err("%s: port is null\n", __func__); |
| return -ENODEV; |
| } |
| |
| cbuf = kmalloc(len, GFP_ATOMIC); |
| if (!cbuf) |
| return -ENOMEM; |
| |
| memcpy(cbuf, buf, len); |
| |
| /* drop cpkt if ch is not open */ |
| if (!test_bit(CH_OPENED, &port->bridge_sts)) { |
| port->drp_cpkt_cnt++; |
| kfree(cbuf); |
| return 0; |
| } |
| |
| pr_debug("%s: ctrl_pkt:%d bytes\n", __func__, len); |
| |
| ctrl_bridge_write(port->brdg.ch_id, cbuf, len); |
| |
| port->to_modem++; |
| |
| return 0; |
| } |
| |
| static void |
| ghsic_send_cbits_tomodem(void *gptr, u8 portno, int cbits) |
| { |
| struct gctrl_port *port; |
| |
| if (portno >= no_ctrl_ports || !gptr) { |
| pr_err("%s: Invalid portno#%d\n", __func__, portno); |
| return; |
| } |
| |
| port = gctrl_ports[portno].port; |
| if (!port) { |
| pr_err("%s: port is null\n", __func__); |
| return; |
| } |
| |
| if (cbits == port->cbits_tomodem) |
| return; |
| |
| port->cbits_tomodem = cbits; |
| |
| if (!test_bit(CH_OPENED, &port->bridge_sts)) |
| return; |
| |
| pr_debug("%s: ctrl_tomodem:%d\n", __func__, cbits); |
| |
| ctrl_bridge_set_cbits(port->brdg.ch_id, cbits); |
| } |
| |
| static void ghsic_ctrl_connect_w(struct work_struct *w) |
| { |
| struct gserial *gser = NULL; |
| struct grmnet *gr = NULL; |
| struct gctrl_port *port = |
| container_of(w, struct gctrl_port, connect_w); |
| unsigned long flags; |
| int retval; |
| unsigned cbits; |
| |
| if (!port || !test_bit(CH_READY, &port->bridge_sts)) |
| return; |
| |
| pr_debug("%s: port:%p\n", __func__, port); |
| |
| retval = ctrl_bridge_open(&port->brdg); |
| if (retval) { |
| pr_err("%s: ctrl bridge open failed :%d\n", __func__, retval); |
| return; |
| } |
| |
| spin_lock_irqsave(&port->port_lock, flags); |
| if (!port->port_usb) { |
| ctrl_bridge_close(port->brdg.ch_id); |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| return; |
| } |
| set_bit(CH_OPENED, &port->bridge_sts); |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| |
| cbits = ctrl_bridge_get_cbits_tohost(port->brdg.ch_id); |
| |
| if (port->gtype == USB_GADGET_SERIAL && (cbits & ACM_CTRL_DCD)) { |
| gser = port->port_usb; |
| if (gser && gser->connect) |
| gser->connect(gser); |
| return; |
| } |
| |
| if (port->gtype == USB_GADGET_RMNET) { |
| gr = port->port_usb; |
| if (gr && gr->connect) |
| gr->connect(gr); |
| } |
| } |
| |
| int ghsic_ctrl_connect(void *gptr, int port_num) |
| { |
| struct gctrl_port *port; |
| struct gserial *gser; |
| struct grmnet *gr; |
| unsigned long flags; |
| |
| pr_debug("%s: port#%d\n", __func__, port_num); |
| |
| if (port_num > no_ctrl_ports || !gptr) { |
| pr_err("%s: invalid portno#%d\n", __func__, port_num); |
| return -ENODEV; |
| } |
| |
| port = gctrl_ports[port_num].port; |
| if (!port) { |
| pr_err("%s: port is null\n", __func__); |
| return -ENODEV; |
| } |
| |
| spin_lock_irqsave(&port->port_lock, flags); |
| if (port->gtype == USB_GADGET_SERIAL) { |
| gser = gptr; |
| gser->notify_modem = ghsic_send_cbits_tomodem; |
| } |
| |
| if (port->gtype == USB_GADGET_RMNET) { |
| gr = gptr; |
| port->send_cpkt_response = gr->send_cpkt_response; |
| gr->send_encap_cmd = ghsic_send_cpkt_tomodem; |
| gr->notify_modem = ghsic_send_cbits_tomodem; |
| } |
| |
| port->port_usb = gptr; |
| port->to_host = 0; |
| port->to_modem = 0; |
| port->drp_cpkt_cnt = 0; |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| |
| queue_work(port->wq, &port->connect_w); |
| |
| return 0; |
| } |
| |
| static void gctrl_disconnect_w(struct work_struct *w) |
| { |
| struct gctrl_port *port = |
| container_of(w, struct gctrl_port, disconnect_w); |
| |
| if (!test_bit(CH_OPENED, &port->bridge_sts)) |
| return; |
| |
| /* send the dtr zero */ |
| ctrl_bridge_close(port->brdg.ch_id); |
| clear_bit(CH_OPENED, &port->bridge_sts); |
| } |
| |
| void ghsic_ctrl_disconnect(void *gptr, int port_num) |
| { |
| struct gctrl_port *port; |
| struct gserial *gser = NULL; |
| struct grmnet *gr = NULL; |
| unsigned long flags; |
| |
| pr_debug("%s: port#%d\n", __func__, port_num); |
| |
| port = gctrl_ports[port_num].port; |
| |
| if (port_num > no_ctrl_ports) { |
| pr_err("%s: invalid portno#%d\n", __func__, port_num); |
| return; |
| } |
| |
| if (!gptr || !port) { |
| pr_err("%s: grmnet port is null\n", __func__); |
| return; |
| } |
| |
| if (port->gtype == USB_GADGET_SERIAL) |
| gser = gptr; |
| else |
| gr = gptr; |
| |
| spin_lock_irqsave(&port->port_lock, flags); |
| if (gr) { |
| gr->send_encap_cmd = 0; |
| gr->notify_modem = 0; |
| } |
| |
| if (gser) |
| gser->notify_modem = 0; |
| port->cbits_tomodem = 0; |
| port->port_usb = 0; |
| port->send_cpkt_response = 0; |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| |
| queue_work(port->wq, &port->disconnect_w); |
| } |
| |
| static void ghsic_ctrl_status(void *ctxt, unsigned int ctrl_bits) |
| { |
| struct gctrl_port *port = ctxt; |
| struct gserial *gser; |
| |
| pr_debug("%s - input control lines: dcd%c dsr%c break%c " |
| "ring%c framing%c parity%c overrun%c\n", __func__, |
| ctrl_bits & ACM_CTRL_DCD ? '+' : '-', |
| ctrl_bits & ACM_CTRL_DSR ? '+' : '-', |
| ctrl_bits & ACM_CTRL_BRK ? '+' : '-', |
| ctrl_bits & ACM_CTRL_RI ? '+' : '-', |
| ctrl_bits & ACM_CTRL_FRAMING ? '+' : '-', |
| ctrl_bits & ACM_CTRL_PARITY ? '+' : '-', |
| ctrl_bits & ACM_CTRL_OVERRUN ? '+' : '-'); |
| |
| port->cbits_tohost = ctrl_bits; |
| gser = port->port_usb; |
| if (gser && gser->send_modem_ctrl_bits) |
| gser->send_modem_ctrl_bits(gser, ctrl_bits); |
| } |
| |
| static int ghsic_ctrl_probe(struct platform_device *pdev) |
| { |
| struct gctrl_port *port; |
| unsigned long flags; |
| |
| pr_debug("%s: name:%s\n", __func__, pdev->name); |
| |
| if (pdev->id >= no_ctrl_ports) { |
| pr_err("%s: invalid port: %d\n", __func__, pdev->id); |
| return -EINVAL; |
| } |
| |
| port = gctrl_ports[pdev->id].port; |
| set_bit(CH_READY, &port->bridge_sts); |
| |
| /* if usb is online, start read */ |
| spin_lock_irqsave(&port->port_lock, flags); |
| if (port->port_usb) |
| queue_work(port->wq, &port->connect_w); |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| |
| return 0; |
| } |
| |
| static int ghsic_ctrl_remove(struct platform_device *pdev) |
| { |
| struct gctrl_port *port; |
| struct gserial *gser = NULL; |
| struct grmnet *gr = NULL; |
| unsigned long flags; |
| |
| pr_debug("%s: name:%s\n", __func__, pdev->name); |
| |
| if (pdev->id >= no_ctrl_ports) { |
| pr_err("%s: invalid port: %d\n", __func__, pdev->id); |
| return -EINVAL; |
| } |
| |
| port = gctrl_ports[pdev->id].port; |
| |
| spin_lock_irqsave(&port->port_lock, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| goto not_ready; |
| } |
| |
| if (port->gtype == USB_GADGET_SERIAL) |
| gser = port->port_usb; |
| else |
| gr = port->port_usb; |
| |
| port->cbits_tohost = 0; |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| |
| if (gr && gr->disconnect) |
| gr->disconnect(gr); |
| |
| if (gser && gser->disconnect) |
| gser->disconnect(gser); |
| |
| ctrl_bridge_close(port->brdg.ch_id); |
| |
| clear_bit(CH_OPENED, &port->bridge_sts); |
| not_ready: |
| clear_bit(CH_READY, &port->bridge_sts); |
| |
| return 0; |
| } |
| |
| static void ghsic_ctrl_port_free(int portno) |
| { |
| struct gctrl_port *port = gctrl_ports[portno].port; |
| struct platform_driver *pdrv = &gctrl_ports[portno].pdrv; |
| |
| destroy_workqueue(port->wq); |
| kfree(port); |
| |
| if (pdrv) |
| platform_driver_unregister(pdrv); |
| } |
| |
| static int gctrl_port_alloc(int portno, enum gadget_type gtype) |
| { |
| struct gctrl_port *port; |
| struct platform_driver *pdrv; |
| |
| port = kzalloc(sizeof(struct gctrl_port), GFP_KERNEL); |
| if (!port) |
| return -ENOMEM; |
| |
| port->wq = create_singlethread_workqueue(ctrl_bridge_names[portno]); |
| if (!port->wq) { |
| pr_err("%s: Unable to create workqueue:%s\n", |
| __func__, ctrl_bridge_names[portno]); |
| return -ENOMEM; |
| } |
| |
| port->port_num = portno; |
| port->gtype = gtype; |
| |
| spin_lock_init(&port->port_lock); |
| |
| INIT_WORK(&port->connect_w, ghsic_ctrl_connect_w); |
| INIT_WORK(&port->disconnect_w, gctrl_disconnect_w); |
| |
| port->brdg.ch_id = portno; |
| port->brdg.ctx = port; |
| port->brdg.ops.send_pkt = ghsic_ctrl_receive; |
| if (port->gtype == USB_GADGET_SERIAL) |
| port->brdg.ops.send_cbits = ghsic_ctrl_status; |
| gctrl_ports[portno].port = port; |
| |
| pdrv = &gctrl_ports[portno].pdrv; |
| pdrv->probe = ghsic_ctrl_probe; |
| pdrv->remove = ghsic_ctrl_remove; |
| pdrv->driver.name = ctrl_bridge_names[portno]; |
| pdrv->driver.owner = THIS_MODULE; |
| |
| platform_driver_register(pdrv); |
| |
| pr_debug("%s: port:%p portno:%d\n", __func__, port, portno); |
| |
| return 0; |
| } |
| |
| int ghsic_ctrl_setup(unsigned int num_ports, enum gadget_type gtype) |
| { |
| int first_port_id = no_ctrl_ports; |
| int total_num_ports = num_ports + no_ctrl_ports; |
| int i; |
| int ret = 0; |
| |
| if (!num_ports || total_num_ports > NUM_PORTS) { |
| pr_err("%s: Invalid num of ports count:%d\n", |
| __func__, num_ports); |
| return -EINVAL; |
| } |
| |
| pr_debug("%s: requested ports:%d\n", __func__, num_ports); |
| |
| for (i = first_port_id; i < (first_port_id + num_ports); i++) { |
| |
| /*probe can be called while port_alloc,so update no_ctrl_ports*/ |
| no_ctrl_ports++; |
| ret = gctrl_port_alloc(i, gtype); |
| if (ret) { |
| no_ctrl_ports--; |
| pr_err("%s: Unable to alloc port:%d\n", __func__, i); |
| goto free_ports; |
| } |
| } |
| |
| return first_port_id; |
| |
| free_ports: |
| for (i = first_port_id; i < no_ctrl_ports; i++) |
| ghsic_ctrl_port_free(i); |
| no_ctrl_ports = first_port_id; |
| return ret; |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| #define DEBUG_BUF_SIZE 1024 |
| static ssize_t gctrl_read_stats(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct gctrl_port *port; |
| struct platform_driver *pdrv; |
| char *buf; |
| unsigned long flags; |
| int ret; |
| int i; |
| int temp = 0; |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| for (i = 0; i < no_ctrl_ports; i++) { |
| port = gctrl_ports[i].port; |
| if (!port) |
| continue; |
| pdrv = &gctrl_ports[i].pdrv; |
| spin_lock_irqsave(&port->port_lock, flags); |
| |
| temp += scnprintf(buf + temp, DEBUG_BUF_SIZE - temp, |
| "\nName: %s\n" |
| "#PORT:%d port: %p\n" |
| "to_usbhost: %lu\n" |
| "to_modem: %lu\n" |
| "cpkt_drp_cnt: %lu\n" |
| "DTR: %s\n" |
| "ch_open: %d\n" |
| "ch_ready: %d\n", |
| pdrv->driver.name, |
| i, port, |
| port->to_host, port->to_modem, |
| port->drp_cpkt_cnt, |
| port->cbits_tomodem ? "HIGH" : "LOW", |
| test_bit(CH_OPENED, &port->bridge_sts), |
| test_bit(CH_READY, &port->bridge_sts)); |
| |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| } |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, temp); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static ssize_t gctrl_reset_stats(struct file *file, |
| const char __user *buf, size_t count, loff_t *ppos) |
| { |
| struct gctrl_port *port; |
| int i; |
| unsigned long flags; |
| |
| for (i = 0; i < no_ctrl_ports; i++) { |
| port = gctrl_ports[i].port; |
| if (!port) |
| continue; |
| |
| spin_lock_irqsave(&port->port_lock, flags); |
| port->to_host = 0; |
| port->to_modem = 0; |
| port->drp_cpkt_cnt = 0; |
| spin_unlock_irqrestore(&port->port_lock, flags); |
| } |
| return count; |
| } |
| |
| const struct file_operations gctrl_stats_ops = { |
| .read = gctrl_read_stats, |
| .write = gctrl_reset_stats, |
| }; |
| |
| struct dentry *gctrl_dent; |
| struct dentry *gctrl_dfile; |
| static void gctrl_debugfs_init(void) |
| { |
| gctrl_dent = debugfs_create_dir("ghsic_ctrl_xport", 0); |
| if (IS_ERR(gctrl_dent)) |
| return; |
| |
| gctrl_dfile = |
| debugfs_create_file("status", 0444, gctrl_dent, 0, |
| &gctrl_stats_ops); |
| if (!gctrl_dfile || IS_ERR(gctrl_dfile)) |
| debugfs_remove(gctrl_dent); |
| } |
| |
| static void gctrl_debugfs_exit(void) |
| { |
| debugfs_remove(gctrl_dfile); |
| debugfs_remove(gctrl_dent); |
| } |
| |
| #else |
| static void gctrl_debugfs_init(void) { } |
| static void gctrl_debugfs_exit(void) { } |
| #endif |
| |
| static int __init gctrl_init(void) |
| { |
| gctrl_debugfs_init(); |
| |
| return 0; |
| } |
| module_init(gctrl_init); |
| |
| static void __exit gctrl_exit(void) |
| { |
| gctrl_debugfs_exit(); |
| } |
| module_exit(gctrl_exit); |
| MODULE_DESCRIPTION("hsic control xport driver"); |
| MODULE_LICENSE("GPL v2"); |