| /* |
| * Copyright (C) 1997,1998 Russell King |
| * Copyright (C) 1999 ARM Limited |
| * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ASM_ARCH_MXC_MX1_H__ |
| #define __ASM_ARCH_MXC_MX1_H__ |
| |
| #ifndef __ASM_ARCH_MXC_HARDWARE_H__ |
| #error "Do not include directly." |
| #endif |
| |
| #include <mach/vmalloc.h> |
| |
| /* |
| * defines the hardware clock tick rate |
| */ |
| #define CLOCK_TICK_RATE 16000000 |
| |
| #define PHYS_OFFSET UL(0x08000000) |
| |
| /* |
| * Memory map |
| */ |
| #define IMX_IO_PHYS 0x00200000 |
| #define IMX_IO_SIZE 0x00100000 |
| #define IMX_IO_BASE VMALLOC_END |
| |
| #define IMX_CS0_PHYS 0x10000000 |
| #define IMX_CS0_SIZE 0x02000000 |
| |
| #define IMX_CS1_PHYS 0x12000000 |
| #define IMX_CS1_SIZE 0x01000000 |
| |
| #define IMX_CS2_PHYS 0x13000000 |
| #define IMX_CS2_SIZE 0x01000000 |
| |
| #define IMX_CS3_PHYS 0x14000000 |
| #define IMX_CS3_SIZE 0x01000000 |
| |
| #define IMX_CS4_PHYS 0x15000000 |
| #define IMX_CS4_SIZE 0x01000000 |
| |
| #define IMX_CS5_PHYS 0x16000000 |
| #define IMX_CS5_SIZE 0x01000000 |
| |
| /* |
| * Register BASEs, based on OFFSETs |
| */ |
| #define AIPI1_BASE_ADDR (0x00000 + IMX_IO_PHYS) |
| #define WDT_BASE_ADDR (0x01000 + IMX_IO_PHYS) |
| #define TIM1_BASE_ADDR (0x02000 + IMX_IO_PHYS) |
| #define TIM2_BASE_ADDR (0x03000 + IMX_IO_PHYS) |
| #define RTC_BASE_ADDR (0x04000 + IMX_IO_PHYS) |
| #define LCDC_BASE_ADDR (0x05000 + IMX_IO_PHYS) |
| #define UART1_BASE_ADDR (0x06000 + IMX_IO_PHYS) |
| #define UART2_BASE_ADDR (0x07000 + IMX_IO_PHYS) |
| #define PWM_BASE_ADDR (0x08000 + IMX_IO_PHYS) |
| #define DMA_BASE_ADDR (0x09000 + IMX_IO_PHYS) |
| #define AIPI2_BASE_ADDR (0x10000 + IMX_IO_PHYS) |
| #define SIM_BASE_ADDR (0x11000 + IMX_IO_PHYS) |
| #define USBD_BASE_ADDR (0x12000 + IMX_IO_PHYS) |
| #define SPI1_BASE_ADDR (0x13000 + IMX_IO_PHYS) |
| #define MMC_BASE_ADDR (0x14000 + IMX_IO_PHYS) |
| #define ASP_BASE_ADDR (0x15000 + IMX_IO_PHYS) |
| #define BTA_BASE_ADDR (0x16000 + IMX_IO_PHYS) |
| #define I2C_BASE_ADDR (0x17000 + IMX_IO_PHYS) |
| #define SSI_BASE_ADDR (0x18000 + IMX_IO_PHYS) |
| #define SPI2_BASE_ADDR (0x19000 + IMX_IO_PHYS) |
| #define MSHC_BASE_ADDR (0x1A000 + IMX_IO_PHYS) |
| #define CCM_BASE_ADDR (0x1B000 + IMX_IO_PHYS) |
| #define SCM_BASE_ADDR (0x1B804 + IMX_IO_PHYS) |
| #define GPIO_BASE_ADDR (0x1C000 + IMX_IO_PHYS) |
| #define EIM_BASE_ADDR (0x20000 + IMX_IO_PHYS) |
| #define SDRAMC_BASE_ADDR (0x21000 + IMX_IO_PHYS) |
| #define MMA_BASE_ADDR (0x22000 + IMX_IO_PHYS) |
| #define AVIC_BASE_ADDR (0x23000 + IMX_IO_PHYS) |
| #define CSI_BASE_ADDR (0x24000 + IMX_IO_PHYS) |
| |
| /* macro to get at IO space when running virtually */ |
| #define IO_ADDRESS(x) ((x) - IMX_IO_PHYS + IMX_IO_BASE) |
| |
| /* define macros needed for entry-macro.S */ |
| #define AVIC_IO_ADDRESS(x) IO_ADDRESS(x) |
| |
| /* fixed interrput numbers */ |
| #define INT_SOFTINT 0 |
| #define CSI_INT 6 |
| #define DSPA_MAC_INT 7 |
| #define DSPA_INT 8 |
| #define COMP_INT 9 |
| #define MSHC_XINT 10 |
| #define GPIO_INT_PORTA 11 |
| #define GPIO_INT_PORTB 12 |
| #define GPIO_INT_PORTC 13 |
| #define LCDC_INT 14 |
| #define SIM_INT 15 |
| #define SIM_DATA_INT 16 |
| #define RTC_INT 17 |
| #define RTC_SAMINT 18 |
| #define UART2_MINT_PFERR 19 |
| #define UART2_MINT_RTS 20 |
| #define UART2_MINT_DTR 21 |
| #define UART2_MINT_UARTC 22 |
| #define UART2_MINT_TX 23 |
| #define UART2_MINT_RX 24 |
| #define UART1_MINT_PFERR 25 |
| #define UART1_MINT_RTS 26 |
| #define UART1_MINT_DTR 27 |
| #define UART1_MINT_UARTC 28 |
| #define UART1_MINT_TX 29 |
| #define UART1_MINT_RX 30 |
| #define VOICE_DAC_INT 31 |
| #define VOICE_ADC_INT 32 |
| #define PEN_DATA_INT 33 |
| #define PWM_INT 34 |
| #define SDHC_INT 35 |
| #define I2C_INT 39 |
| #define CSPI_INT 41 |
| #define SSI_TX_INT 42 |
| #define SSI_TX_ERR_INT 43 |
| #define SSI_RX_INT 44 |
| #define SSI_RX_ERR_INT 45 |
| #define TOUCH_INT 46 |
| #define USBD_INT0 47 |
| #define USBD_INT1 48 |
| #define USBD_INT2 49 |
| #define USBD_INT3 50 |
| #define USBD_INT4 51 |
| #define USBD_INT5 52 |
| #define USBD_INT6 53 |
| #define BTSYS_INT 55 |
| #define BTTIM_INT 56 |
| #define BTWUI_INT 57 |
| #define TIM2_INT 58 |
| #define TIM1_INT 59 |
| #define DMA_ERR 60 |
| #define DMA_INT 61 |
| #define GPIO_INT_PORTD 62 |
| #define WDT_INT 63 |
| |
| #define MXC_MAX_INT_LINES 64 |
| |
| #define NR_IRQS 256 |
| |
| /* gpio and gpio based interrupt handling */ |
| #define GPIO_DR 0x1C |
| #define GPIO_GDIR 0x00 |
| #define GPIO_PSR 0x24 |
| #define GPIO_ICR1 0x28 |
| #define GPIO_ICR2 0x2C |
| #define GPIO_IMR 0x30 |
| #define GPIO_ISR 0x34 |
| #define GPIO_INT_LOW_LEV 0x3 |
| #define GPIO_INT_HIGH_LEV 0x2 |
| #define GPIO_INT_RISE_EDGE 0x0 |
| #define GPIO_INT_FALL_EDGE 0x1 |
| #define GPIO_INT_NONE 0x4 |
| |
| /* DMA */ |
| #define DMA_REQ_UART3_T 2 |
| #define DMA_REQ_UART3_R 3 |
| #define DMA_REQ_SSI2_T 4 |
| #define DMA_REQ_SSI2_R 5 |
| #define DMA_REQ_CSI_STAT 6 |
| #define DMA_REQ_CSI_R 7 |
| #define DMA_REQ_MSHC 8 |
| #define DMA_REQ_DSPA_DCT_DOUT 9 |
| #define DMA_REQ_DSPA_DCT_DIN 10 |
| #define DMA_REQ_DSPA_MAC 11 |
| #define DMA_REQ_EXT 12 |
| #define DMA_REQ_SDHC 13 |
| #define DMA_REQ_SPI1_R 14 |
| #define DMA_REQ_SPI1_T 15 |
| #define DMA_REQ_SSI_T 16 |
| #define DMA_REQ_SSI_R 17 |
| #define DMA_REQ_ASP_DAC 18 |
| #define DMA_REQ_ASP_ADC 19 |
| #define DMA_REQ_USP_EP(x) (20 + (x)) |
| #define DMA_REQ_SPI2_R 26 |
| #define DMA_REQ_SPI2_T 27 |
| #define DMA_REQ_UART2_T 28 |
| #define DMA_REQ_UART2_R 29 |
| #define DMA_REQ_UART1_T 30 |
| #define DMA_REQ_UART1_R 31 |
| |
| /* mandatory for CONFIG_LL_DEBUG */ |
| #define MXC_LL_UART_PADDR UART1_BASE_ADDR |
| #define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR) |
| |
| #endif /* __ASM_ARCH_MXC_MX1_H__ */ |