| /* |
| * Generic HDLC support routines for Linux |
| * Frame Relay support |
| * |
| * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| * |
| |
| Theory of PVC state |
| |
| DCE mode: |
| |
| (exist,new) -> 0,0 when "PVC create" or if "link unreliable" |
| 0,x -> 1,1 if "link reliable" when sending FULL STATUS |
| 1,1 -> 1,0 if received FULL STATUS ACK |
| |
| (active) -> 0 when "ifconfig PVC down" or "link unreliable" or "PVC create" |
| -> 1 when "PVC up" and (exist,new) = 1,0 |
| |
| DTE mode: |
| (exist,new,active) = FULL STATUS if "link reliable" |
| = 0, 0, 0 if "link unreliable" |
| No LMI: |
| active = open and "link reliable" |
| exist = new = not used |
| |
| CCITT LMI: ITU-T Q.933 Annex A |
| ANSI LMI: ANSI T1.617 Annex D |
| CISCO LMI: the original, aka "Gang of Four" LMI |
| |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/etherdevice.h> |
| #include <linux/hdlc.h> |
| #include <linux/if_arp.h> |
| #include <linux/inetdevice.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/poll.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| |
| #undef DEBUG_PKT |
| #undef DEBUG_ECN |
| #undef DEBUG_LINK |
| #undef DEBUG_PROTO |
| #undef DEBUG_PVC |
| |
| #define FR_UI 0x03 |
| #define FR_PAD 0x00 |
| |
| #define NLPID_IP 0xCC |
| #define NLPID_IPV6 0x8E |
| #define NLPID_SNAP 0x80 |
| #define NLPID_PAD 0x00 |
| #define NLPID_CCITT_ANSI_LMI 0x08 |
| #define NLPID_CISCO_LMI 0x09 |
| |
| |
| #define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */ |
| #define LMI_CISCO_DLCI 1023 |
| |
| #define LMI_CALLREF 0x00 /* Call Reference */ |
| #define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */ |
| #define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */ |
| #define LMI_CCITT_REPTYPE 0x51 |
| #define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */ |
| #define LMI_CCITT_ALIVE 0x53 |
| #define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */ |
| #define LMI_CCITT_PVCSTAT 0x57 |
| |
| #define LMI_FULLREP 0x00 /* full report */ |
| #define LMI_INTEGRITY 0x01 /* link integrity report */ |
| #define LMI_SINGLE 0x02 /* single PVC report */ |
| |
| #define LMI_STATUS_ENQUIRY 0x75 |
| #define LMI_STATUS 0x7D /* reply */ |
| |
| #define LMI_REPT_LEN 1 /* report type element length */ |
| #define LMI_INTEG_LEN 2 /* link integrity element length */ |
| |
| #define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */ |
| #define LMI_ANSI_LENGTH 14 |
| |
| |
| typedef struct { |
| #if defined(__LITTLE_ENDIAN_BITFIELD) |
| unsigned ea1: 1; |
| unsigned cr: 1; |
| unsigned dlcih: 6; |
| |
| unsigned ea2: 1; |
| unsigned de: 1; |
| unsigned becn: 1; |
| unsigned fecn: 1; |
| unsigned dlcil: 4; |
| #else |
| unsigned dlcih: 6; |
| unsigned cr: 1; |
| unsigned ea1: 1; |
| |
| unsigned dlcil: 4; |
| unsigned fecn: 1; |
| unsigned becn: 1; |
| unsigned de: 1; |
| unsigned ea2: 1; |
| #endif |
| }__packed fr_hdr; |
| |
| |
| typedef struct pvc_device_struct { |
| struct net_device *frad; |
| struct net_device *main; |
| struct net_device *ether; /* bridged Ethernet interface */ |
| struct pvc_device_struct *next; /* Sorted in ascending DLCI order */ |
| int dlci; |
| int open_count; |
| |
| struct { |
| unsigned int new: 1; |
| unsigned int active: 1; |
| unsigned int exist: 1; |
| unsigned int deleted: 1; |
| unsigned int fecn: 1; |
| unsigned int becn: 1; |
| unsigned int bandwidth; /* Cisco LMI reporting only */ |
| }state; |
| }pvc_device; |
| |
| struct frad_state { |
| fr_proto settings; |
| pvc_device *first_pvc; |
| int dce_pvc_count; |
| |
| struct timer_list timer; |
| unsigned long last_poll; |
| int reliable; |
| int dce_changed; |
| int request; |
| int fullrep_sent; |
| u32 last_errors; /* last errors bit list */ |
| u8 n391cnt; |
| u8 txseq; /* TX sequence number */ |
| u8 rxseq; /* RX sequence number */ |
| }; |
| |
| |
| static int fr_ioctl(struct net_device *dev, struct ifreq *ifr); |
| |
| |
| static inline u16 q922_to_dlci(u8 *hdr) |
| { |
| return ((hdr[0] & 0xFC) << 2) | ((hdr[1] & 0xF0) >> 4); |
| } |
| |
| |
| static inline void dlci_to_q922(u8 *hdr, u16 dlci) |
| { |
| hdr[0] = (dlci >> 2) & 0xFC; |
| hdr[1] = ((dlci << 4) & 0xF0) | 0x01; |
| } |
| |
| |
| static inline struct frad_state* state(hdlc_device *hdlc) |
| { |
| return(struct frad_state *)(hdlc->state); |
| } |
| |
| |
| static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci) |
| { |
| pvc_device *pvc = state(hdlc)->first_pvc; |
| |
| while (pvc) { |
| if (pvc->dlci == dlci) |
| return pvc; |
| if (pvc->dlci > dlci) |
| return NULL; /* the list is sorted */ |
| pvc = pvc->next; |
| } |
| |
| return NULL; |
| } |
| |
| |
| static pvc_device* add_pvc(struct net_device *dev, u16 dlci) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| pvc_device *pvc, **pvc_p = &state(hdlc)->first_pvc; |
| |
| while (*pvc_p) { |
| if ((*pvc_p)->dlci == dlci) |
| return *pvc_p; |
| if ((*pvc_p)->dlci > dlci) |
| break; /* the list is sorted */ |
| pvc_p = &(*pvc_p)->next; |
| } |
| |
| pvc = kzalloc(sizeof(pvc_device), GFP_ATOMIC); |
| #ifdef DEBUG_PVC |
| printk(KERN_DEBUG "add_pvc: allocated pvc %p, frad %p\n", pvc, dev); |
| #endif |
| if (!pvc) |
| return NULL; |
| |
| pvc->dlci = dlci; |
| pvc->frad = dev; |
| pvc->next = *pvc_p; /* Put it in the chain */ |
| *pvc_p = pvc; |
| return pvc; |
| } |
| |
| |
| static inline int pvc_is_used(pvc_device *pvc) |
| { |
| return pvc->main || pvc->ether; |
| } |
| |
| |
| static inline void pvc_carrier(int on, pvc_device *pvc) |
| { |
| if (on) { |
| if (pvc->main) |
| if (!netif_carrier_ok(pvc->main)) |
| netif_carrier_on(pvc->main); |
| if (pvc->ether) |
| if (!netif_carrier_ok(pvc->ether)) |
| netif_carrier_on(pvc->ether); |
| } else { |
| if (pvc->main) |
| if (netif_carrier_ok(pvc->main)) |
| netif_carrier_off(pvc->main); |
| if (pvc->ether) |
| if (netif_carrier_ok(pvc->ether)) |
| netif_carrier_off(pvc->ether); |
| } |
| } |
| |
| |
| static inline void delete_unused_pvcs(hdlc_device *hdlc) |
| { |
| pvc_device **pvc_p = &state(hdlc)->first_pvc; |
| |
| while (*pvc_p) { |
| if (!pvc_is_used(*pvc_p)) { |
| pvc_device *pvc = *pvc_p; |
| #ifdef DEBUG_PVC |
| printk(KERN_DEBUG "freeing unused pvc: %p\n", pvc); |
| #endif |
| *pvc_p = pvc->next; |
| kfree(pvc); |
| continue; |
| } |
| pvc_p = &(*pvc_p)->next; |
| } |
| } |
| |
| |
| static inline struct net_device** get_dev_p(pvc_device *pvc, int type) |
| { |
| if (type == ARPHRD_ETHER) |
| return &pvc->ether; |
| else |
| return &pvc->main; |
| } |
| |
| |
| static int fr_hard_header(struct sk_buff **skb_p, u16 dlci) |
| { |
| u16 head_len; |
| struct sk_buff *skb = *skb_p; |
| |
| switch (skb->protocol) { |
| case cpu_to_be16(NLPID_CCITT_ANSI_LMI): |
| head_len = 4; |
| skb_push(skb, head_len); |
| skb->data[3] = NLPID_CCITT_ANSI_LMI; |
| break; |
| |
| case cpu_to_be16(NLPID_CISCO_LMI): |
| head_len = 4; |
| skb_push(skb, head_len); |
| skb->data[3] = NLPID_CISCO_LMI; |
| break; |
| |
| case cpu_to_be16(ETH_P_IP): |
| head_len = 4; |
| skb_push(skb, head_len); |
| skb->data[3] = NLPID_IP; |
| break; |
| |
| case cpu_to_be16(ETH_P_IPV6): |
| head_len = 4; |
| skb_push(skb, head_len); |
| skb->data[3] = NLPID_IPV6; |
| break; |
| |
| case cpu_to_be16(ETH_P_802_3): |
| head_len = 10; |
| if (skb_headroom(skb) < head_len) { |
| struct sk_buff *skb2 = skb_realloc_headroom(skb, |
| head_len); |
| if (!skb2) |
| return -ENOBUFS; |
| dev_kfree_skb(skb); |
| skb = *skb_p = skb2; |
| } |
| skb_push(skb, head_len); |
| skb->data[3] = FR_PAD; |
| skb->data[4] = NLPID_SNAP; |
| skb->data[5] = FR_PAD; |
| skb->data[6] = 0x80; |
| skb->data[7] = 0xC2; |
| skb->data[8] = 0x00; |
| skb->data[9] = 0x07; /* bridged Ethernet frame w/out FCS */ |
| break; |
| |
| default: |
| head_len = 10; |
| skb_push(skb, head_len); |
| skb->data[3] = FR_PAD; |
| skb->data[4] = NLPID_SNAP; |
| skb->data[5] = FR_PAD; |
| skb->data[6] = FR_PAD; |
| skb->data[7] = FR_PAD; |
| *(__be16*)(skb->data + 8) = skb->protocol; |
| } |
| |
| dlci_to_q922(skb->data, dlci); |
| skb->data[2] = FR_UI; |
| return 0; |
| } |
| |
| |
| |
| static int pvc_open(struct net_device *dev) |
| { |
| pvc_device *pvc = dev->ml_priv; |
| |
| if ((pvc->frad->flags & IFF_UP) == 0) |
| return -EIO; /* Frad must be UP in order to activate PVC */ |
| |
| if (pvc->open_count++ == 0) { |
| hdlc_device *hdlc = dev_to_hdlc(pvc->frad); |
| if (state(hdlc)->settings.lmi == LMI_NONE) |
| pvc->state.active = netif_carrier_ok(pvc->frad); |
| |
| pvc_carrier(pvc->state.active, pvc); |
| state(hdlc)->dce_changed = 1; |
| } |
| return 0; |
| } |
| |
| |
| |
| static int pvc_close(struct net_device *dev) |
| { |
| pvc_device *pvc = dev->ml_priv; |
| |
| if (--pvc->open_count == 0) { |
| hdlc_device *hdlc = dev_to_hdlc(pvc->frad); |
| if (state(hdlc)->settings.lmi == LMI_NONE) |
| pvc->state.active = 0; |
| |
| if (state(hdlc)->settings.dce) { |
| state(hdlc)->dce_changed = 1; |
| pvc->state.active = 0; |
| } |
| } |
| return 0; |
| } |
| |
| |
| |
| static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| pvc_device *pvc = dev->ml_priv; |
| fr_proto_pvc_info info; |
| |
| if (ifr->ifr_settings.type == IF_GET_PROTO) { |
| if (dev->type == ARPHRD_ETHER) |
| ifr->ifr_settings.type = IF_PROTO_FR_ETH_PVC; |
| else |
| ifr->ifr_settings.type = IF_PROTO_FR_PVC; |
| |
| if (ifr->ifr_settings.size < sizeof(info)) { |
| /* data size wanted */ |
| ifr->ifr_settings.size = sizeof(info); |
| return -ENOBUFS; |
| } |
| |
| info.dlci = pvc->dlci; |
| memcpy(info.master, pvc->frad->name, IFNAMSIZ); |
| if (copy_to_user(ifr->ifr_settings.ifs_ifsu.fr_pvc_info, |
| &info, sizeof(info))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| pvc_device *pvc = dev->ml_priv; |
| |
| if (pvc->state.active) { |
| if (dev->type == ARPHRD_ETHER) { |
| int pad = ETH_ZLEN - skb->len; |
| if (pad > 0) { /* Pad the frame with zeros */ |
| int len = skb->len; |
| if (skb_tailroom(skb) < pad) |
| if (pskb_expand_head(skb, 0, pad, |
| GFP_ATOMIC)) { |
| dev->stats.tx_dropped++; |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| skb_put(skb, pad); |
| memset(skb->data + len, 0, pad); |
| } |
| skb->protocol = cpu_to_be16(ETH_P_802_3); |
| } |
| if (!fr_hard_header(&skb, pvc->dlci)) { |
| dev->stats.tx_bytes += skb->len; |
| dev->stats.tx_packets++; |
| if (pvc->state.fecn) /* TX Congestion counter */ |
| dev->stats.tx_compressed++; |
| skb->dev = pvc->frad; |
| dev_queue_xmit(skb); |
| return NETDEV_TX_OK; |
| } |
| } |
| |
| dev->stats.tx_dropped++; |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| static inline void fr_log_dlci_active(pvc_device *pvc) |
| { |
| printk(KERN_INFO "%s: DLCI %d [%s%s%s]%s %s\n", |
| pvc->frad->name, |
| pvc->dlci, |
| pvc->main ? pvc->main->name : "", |
| pvc->main && pvc->ether ? " " : "", |
| pvc->ether ? pvc->ether->name : "", |
| pvc->state.new ? " new" : "", |
| !pvc->state.exist ? "deleted" : |
| pvc->state.active ? "active" : "inactive"); |
| } |
| |
| |
| |
| static inline u8 fr_lmi_nextseq(u8 x) |
| { |
| x++; |
| return x ? x : 1; |
| } |
| |
| |
| static void fr_lmi_send(struct net_device *dev, int fullrep) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct sk_buff *skb; |
| pvc_device *pvc = state(hdlc)->first_pvc; |
| int lmi = state(hdlc)->settings.lmi; |
| int dce = state(hdlc)->settings.dce; |
| int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; |
| int stat_len = (lmi == LMI_CISCO) ? 6 : 3; |
| u8 *data; |
| int i = 0; |
| |
| if (dce && fullrep) { |
| len += state(hdlc)->dce_pvc_count * (2 + stat_len); |
| if (len > HDLC_MAX_MRU) { |
| printk(KERN_WARNING "%s: Too many PVCs while sending " |
| "LMI full report\n", dev->name); |
| return; |
| } |
| } |
| |
| skb = dev_alloc_skb(len); |
| if (!skb) { |
| printk(KERN_WARNING "%s: Memory squeeze on fr_lmi_send()\n", |
| dev->name); |
| return; |
| } |
| memset(skb->data, 0, len); |
| skb_reserve(skb, 4); |
| if (lmi == LMI_CISCO) { |
| skb->protocol = cpu_to_be16(NLPID_CISCO_LMI); |
| fr_hard_header(&skb, LMI_CISCO_DLCI); |
| } else { |
| skb->protocol = cpu_to_be16(NLPID_CCITT_ANSI_LMI); |
| fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI); |
| } |
| data = skb_tail_pointer(skb); |
| data[i++] = LMI_CALLREF; |
| data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY; |
| if (lmi == LMI_ANSI) |
| data[i++] = LMI_ANSI_LOCKSHIFT; |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : |
| LMI_ANSI_CISCO_REPTYPE; |
| data[i++] = LMI_REPT_LEN; |
| data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; |
| data[i++] = LMI_INTEG_LEN; |
| data[i++] = state(hdlc)->txseq = |
| fr_lmi_nextseq(state(hdlc)->txseq); |
| data[i++] = state(hdlc)->rxseq; |
| |
| if (dce && fullrep) { |
| while (pvc) { |
| data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : |
| LMI_ANSI_CISCO_PVCSTAT; |
| data[i++] = stat_len; |
| |
| /* LMI start/restart */ |
| if (state(hdlc)->reliable && !pvc->state.exist) { |
| pvc->state.exist = pvc->state.new = 1; |
| fr_log_dlci_active(pvc); |
| } |
| |
| /* ifconfig PVC up */ |
| if (pvc->open_count && !pvc->state.active && |
| pvc->state.exist && !pvc->state.new) { |
| pvc_carrier(1, pvc); |
| pvc->state.active = 1; |
| fr_log_dlci_active(pvc); |
| } |
| |
| if (lmi == LMI_CISCO) { |
| data[i] = pvc->dlci >> 8; |
| data[i + 1] = pvc->dlci & 0xFF; |
| } else { |
| data[i] = (pvc->dlci >> 4) & 0x3F; |
| data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80; |
| data[i + 2] = 0x80; |
| } |
| |
| if (pvc->state.new) |
| data[i + 2] |= 0x08; |
| else if (pvc->state.active) |
| data[i + 2] |= 0x02; |
| |
| i += stat_len; |
| pvc = pvc->next; |
| } |
| } |
| |
| skb_put(skb, i); |
| skb->priority = TC_PRIO_CONTROL; |
| skb->dev = dev; |
| skb_reset_network_header(skb); |
| |
| dev_queue_xmit(skb); |
| } |
| |
| |
| |
| static void fr_set_link_state(int reliable, struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| pvc_device *pvc = state(hdlc)->first_pvc; |
| |
| state(hdlc)->reliable = reliable; |
| if (reliable) { |
| netif_dormant_off(dev); |
| state(hdlc)->n391cnt = 0; /* Request full status */ |
| state(hdlc)->dce_changed = 1; |
| |
| if (state(hdlc)->settings.lmi == LMI_NONE) { |
| while (pvc) { /* Activate all PVCs */ |
| pvc_carrier(1, pvc); |
| pvc->state.exist = pvc->state.active = 1; |
| pvc->state.new = 0; |
| pvc = pvc->next; |
| } |
| } |
| } else { |
| netif_dormant_on(dev); |
| while (pvc) { /* Deactivate all PVCs */ |
| pvc_carrier(0, pvc); |
| pvc->state.exist = pvc->state.active = 0; |
| pvc->state.new = 0; |
| if (!state(hdlc)->settings.dce) |
| pvc->state.bandwidth = 0; |
| pvc = pvc->next; |
| } |
| } |
| } |
| |
| |
| static void fr_timer(unsigned long arg) |
| { |
| struct net_device *dev = (struct net_device *)arg; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| int i, cnt = 0, reliable; |
| u32 list; |
| |
| if (state(hdlc)->settings.dce) { |
| reliable = state(hdlc)->request && |
| time_before(jiffies, state(hdlc)->last_poll + |
| state(hdlc)->settings.t392 * HZ); |
| state(hdlc)->request = 0; |
| } else { |
| state(hdlc)->last_errors <<= 1; /* Shift the list */ |
| if (state(hdlc)->request) { |
| if (state(hdlc)->reliable) |
| printk(KERN_INFO "%s: No LMI status reply " |
| "received\n", dev->name); |
| state(hdlc)->last_errors |= 1; |
| } |
| |
| list = state(hdlc)->last_errors; |
| for (i = 0; i < state(hdlc)->settings.n393; i++, list >>= 1) |
| cnt += (list & 1); /* errors count */ |
| |
| reliable = (cnt < state(hdlc)->settings.n392); |
| } |
| |
| if (state(hdlc)->reliable != reliable) { |
| printk(KERN_INFO "%s: Link %sreliable\n", dev->name, |
| reliable ? "" : "un"); |
| fr_set_link_state(reliable, dev); |
| } |
| |
| if (state(hdlc)->settings.dce) |
| state(hdlc)->timer.expires = jiffies + |
| state(hdlc)->settings.t392 * HZ; |
| else { |
| if (state(hdlc)->n391cnt) |
| state(hdlc)->n391cnt--; |
| |
| fr_lmi_send(dev, state(hdlc)->n391cnt == 0); |
| |
| state(hdlc)->last_poll = jiffies; |
| state(hdlc)->request = 1; |
| state(hdlc)->timer.expires = jiffies + |
| state(hdlc)->settings.t391 * HZ; |
| } |
| |
| state(hdlc)->timer.function = fr_timer; |
| state(hdlc)->timer.data = arg; |
| add_timer(&state(hdlc)->timer); |
| } |
| |
| |
| static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| pvc_device *pvc; |
| u8 rxseq, txseq; |
| int lmi = state(hdlc)->settings.lmi; |
| int dce = state(hdlc)->settings.dce; |
| int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; |
| |
| if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : |
| LMI_CCITT_CISCO_LENGTH)) { |
| printk(KERN_INFO "%s: Short LMI frame\n", dev->name); |
| return 1; |
| } |
| |
| if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : |
| NLPID_CCITT_ANSI_LMI)) { |
| printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n", |
| dev->name); |
| return 1; |
| } |
| |
| if (skb->data[4] != LMI_CALLREF) { |
| printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n", |
| dev->name, skb->data[4]); |
| return 1; |
| } |
| |
| if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) { |
| printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n", |
| dev->name, skb->data[5]); |
| return 1; |
| } |
| |
| if (lmi == LMI_ANSI) { |
| if (skb->data[6] != LMI_ANSI_LOCKSHIFT) { |
| printk(KERN_INFO "%s: Not ANSI locking shift in LMI" |
| " message (0x%02X)\n", dev->name, skb->data[6]); |
| return 1; |
| } |
| i = 7; |
| } else |
| i = 6; |
| |
| if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : |
| LMI_ANSI_CISCO_REPTYPE)) { |
| printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n", |
| dev->name, skb->data[i]); |
| return 1; |
| } |
| |
| if (skb->data[++i] != LMI_REPT_LEN) { |
| printk(KERN_INFO "%s: Invalid LMI Report type IE length" |
| " (%u)\n", dev->name, skb->data[i]); |
| return 1; |
| } |
| |
| reptype = skb->data[++i]; |
| if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) { |
| printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n", |
| dev->name, reptype); |
| return 1; |
| } |
| |
| if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE : |
| LMI_ANSI_CISCO_ALIVE)) { |
| printk(KERN_INFO "%s: Not an LMI Link integrity verification" |
| " IE (0x%02X)\n", dev->name, skb->data[i]); |
| return 1; |
| } |
| |
| if (skb->data[++i] != LMI_INTEG_LEN) { |
| printk(KERN_INFO "%s: Invalid LMI Link integrity verification" |
| " IE length (%u)\n", dev->name, skb->data[i]); |
| return 1; |
| } |
| i++; |
| |
| state(hdlc)->rxseq = skb->data[i++]; /* TX sequence from peer */ |
| rxseq = skb->data[i++]; /* Should confirm our sequence */ |
| |
| txseq = state(hdlc)->txseq; |
| |
| if (dce) |
| state(hdlc)->last_poll = jiffies; |
| |
| error = 0; |
| if (!state(hdlc)->reliable) |
| error = 1; |
| |
| if (rxseq == 0 || rxseq != txseq) { /* Ask for full report next time */ |
| state(hdlc)->n391cnt = 0; |
| error = 1; |
| } |
| |
| if (dce) { |
| if (state(hdlc)->fullrep_sent && !error) { |
| /* Stop sending full report - the last one has been confirmed by DTE */ |
| state(hdlc)->fullrep_sent = 0; |
| pvc = state(hdlc)->first_pvc; |
| while (pvc) { |
| if (pvc->state.new) { |
| pvc->state.new = 0; |
| |
| /* Tell DTE that new PVC is now active */ |
| state(hdlc)->dce_changed = 1; |
| } |
| pvc = pvc->next; |
| } |
| } |
| |
| if (state(hdlc)->dce_changed) { |
| reptype = LMI_FULLREP; |
| state(hdlc)->fullrep_sent = 1; |
| state(hdlc)->dce_changed = 0; |
| } |
| |
| state(hdlc)->request = 1; /* got request */ |
| fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); |
| return 0; |
| } |
| |
| /* DTE */ |
| |
| state(hdlc)->request = 0; /* got response, no request pending */ |
| |
| if (error) |
| return 0; |
| |
| if (reptype != LMI_FULLREP) |
| return 0; |
| |
| pvc = state(hdlc)->first_pvc; |
| |
| while (pvc) { |
| pvc->state.deleted = 1; |
| pvc = pvc->next; |
| } |
| |
| no_ram = 0; |
| while (skb->len >= i + 2 + stat_len) { |
| u16 dlci; |
| u32 bw; |
| unsigned int active, new; |
| |
| if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : |
| LMI_ANSI_CISCO_PVCSTAT)) { |
| printk(KERN_INFO "%s: Not an LMI PVC status IE" |
| " (0x%02X)\n", dev->name, skb->data[i]); |
| return 1; |
| } |
| |
| if (skb->data[++i] != stat_len) { |
| printk(KERN_INFO "%s: Invalid LMI PVC status IE length" |
| " (%u)\n", dev->name, skb->data[i]); |
| return 1; |
| } |
| i++; |
| |
| new = !! (skb->data[i + 2] & 0x08); |
| active = !! (skb->data[i + 2] & 0x02); |
| if (lmi == LMI_CISCO) { |
| dlci = (skb->data[i] << 8) | skb->data[i + 1]; |
| bw = (skb->data[i + 3] << 16) | |
| (skb->data[i + 4] << 8) | |
| (skb->data[i + 5]); |
| } else { |
| dlci = ((skb->data[i] & 0x3F) << 4) | |
| ((skb->data[i + 1] & 0x78) >> 3); |
| bw = 0; |
| } |
| |
| pvc = add_pvc(dev, dlci); |
| |
| if (!pvc && !no_ram) { |
| printk(KERN_WARNING |
| "%s: Memory squeeze on fr_lmi_recv()\n", |
| dev->name); |
| no_ram = 1; |
| } |
| |
| if (pvc) { |
| pvc->state.exist = 1; |
| pvc->state.deleted = 0; |
| if (active != pvc->state.active || |
| new != pvc->state.new || |
| bw != pvc->state.bandwidth || |
| !pvc->state.exist) { |
| pvc->state.new = new; |
| pvc->state.active = active; |
| pvc->state.bandwidth = bw; |
| pvc_carrier(active, pvc); |
| fr_log_dlci_active(pvc); |
| } |
| } |
| |
| i += stat_len; |
| } |
| |
| pvc = state(hdlc)->first_pvc; |
| |
| while (pvc) { |
| if (pvc->state.deleted && pvc->state.exist) { |
| pvc_carrier(0, pvc); |
| pvc->state.active = pvc->state.new = 0; |
| pvc->state.exist = 0; |
| pvc->state.bandwidth = 0; |
| fr_log_dlci_active(pvc); |
| } |
| pvc = pvc->next; |
| } |
| |
| /* Next full report after N391 polls */ |
| state(hdlc)->n391cnt = state(hdlc)->settings.n391; |
| |
| return 0; |
| } |
| |
| |
| static int fr_rx(struct sk_buff *skb) |
| { |
| struct net_device *frad = skb->dev; |
| hdlc_device *hdlc = dev_to_hdlc(frad); |
| fr_hdr *fh = (fr_hdr*)skb->data; |
| u8 *data = skb->data; |
| u16 dlci; |
| pvc_device *pvc; |
| struct net_device *dev = NULL; |
| |
| if (skb->len <= 4 || fh->ea1 || data[2] != FR_UI) |
| goto rx_error; |
| |
| dlci = q922_to_dlci(skb->data); |
| |
| if ((dlci == LMI_CCITT_ANSI_DLCI && |
| (state(hdlc)->settings.lmi == LMI_ANSI || |
| state(hdlc)->settings.lmi == LMI_CCITT)) || |
| (dlci == LMI_CISCO_DLCI && |
| state(hdlc)->settings.lmi == LMI_CISCO)) { |
| if (fr_lmi_recv(frad, skb)) |
| goto rx_error; |
| dev_kfree_skb_any(skb); |
| return NET_RX_SUCCESS; |
| } |
| |
| pvc = find_pvc(hdlc, dlci); |
| if (!pvc) { |
| #ifdef DEBUG_PKT |
| printk(KERN_INFO "%s: No PVC for received frame's DLCI %d\n", |
| frad->name, dlci); |
| #endif |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| if (pvc->state.fecn != fh->fecn) { |
| #ifdef DEBUG_ECN |
| printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", frad->name, |
| dlci, fh->fecn ? "N" : "FF"); |
| #endif |
| pvc->state.fecn ^= 1; |
| } |
| |
| if (pvc->state.becn != fh->becn) { |
| #ifdef DEBUG_ECN |
| printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", frad->name, |
| dlci, fh->becn ? "N" : "FF"); |
| #endif |
| pvc->state.becn ^= 1; |
| } |
| |
| |
| if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { |
| frad->stats.rx_dropped++; |
| return NET_RX_DROP; |
| } |
| |
| if (data[3] == NLPID_IP) { |
| skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */ |
| dev = pvc->main; |
| skb->protocol = htons(ETH_P_IP); |
| |
| } else if (data[3] == NLPID_IPV6) { |
| skb_pull(skb, 4); /* Remove 4-byte header (hdr, UI, NLPID) */ |
| dev = pvc->main; |
| skb->protocol = htons(ETH_P_IPV6); |
| |
| } else if (skb->len > 10 && data[3] == FR_PAD && |
| data[4] == NLPID_SNAP && data[5] == FR_PAD) { |
| u16 oui = ntohs(*(__be16*)(data + 6)); |
| u16 pid = ntohs(*(__be16*)(data + 8)); |
| skb_pull(skb, 10); |
| |
| switch ((((u32)oui) << 16) | pid) { |
| case ETH_P_ARP: /* routed frame with SNAP */ |
| case ETH_P_IPX: |
| case ETH_P_IP: /* a long variant */ |
| case ETH_P_IPV6: |
| dev = pvc->main; |
| skb->protocol = htons(pid); |
| break; |
| |
| case 0x80C20007: /* bridged Ethernet frame */ |
| if ((dev = pvc->ether) != NULL) |
| skb->protocol = eth_type_trans(skb, dev); |
| break; |
| |
| default: |
| printk(KERN_INFO "%s: Unsupported protocol, OUI=%x " |
| "PID=%x\n", frad->name, oui, pid); |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| } else { |
| printk(KERN_INFO "%s: Unsupported protocol, NLPID=%x " |
| "length = %i\n", frad->name, data[3], skb->len); |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| if (dev) { |
| dev->stats.rx_packets++; /* PVC traffic */ |
| dev->stats.rx_bytes += skb->len; |
| if (pvc->state.becn) |
| dev->stats.rx_compressed++; |
| skb->dev = dev; |
| netif_rx(skb); |
| return NET_RX_SUCCESS; |
| } else { |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| rx_error: |
| frad->stats.rx_errors++; /* Mark error */ |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| |
| |
| static void fr_start(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| #ifdef DEBUG_LINK |
| printk(KERN_DEBUG "fr_start\n"); |
| #endif |
| if (state(hdlc)->settings.lmi != LMI_NONE) { |
| state(hdlc)->reliable = 0; |
| state(hdlc)->dce_changed = 1; |
| state(hdlc)->request = 0; |
| state(hdlc)->fullrep_sent = 0; |
| state(hdlc)->last_errors = 0xFFFFFFFF; |
| state(hdlc)->n391cnt = 0; |
| state(hdlc)->txseq = state(hdlc)->rxseq = 0; |
| |
| init_timer(&state(hdlc)->timer); |
| /* First poll after 1 s */ |
| state(hdlc)->timer.expires = jiffies + HZ; |
| state(hdlc)->timer.function = fr_timer; |
| state(hdlc)->timer.data = (unsigned long)dev; |
| add_timer(&state(hdlc)->timer); |
| } else |
| fr_set_link_state(1, dev); |
| } |
| |
| |
| static void fr_stop(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| #ifdef DEBUG_LINK |
| printk(KERN_DEBUG "fr_stop\n"); |
| #endif |
| if (state(hdlc)->settings.lmi != LMI_NONE) |
| del_timer_sync(&state(hdlc)->timer); |
| fr_set_link_state(0, dev); |
| } |
| |
| |
| static void fr_close(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| pvc_device *pvc = state(hdlc)->first_pvc; |
| |
| while (pvc) { /* Shutdown all PVCs for this FRAD */ |
| if (pvc->main) |
| dev_close(pvc->main); |
| if (pvc->ether) |
| dev_close(pvc->ether); |
| pvc = pvc->next; |
| } |
| } |
| |
| |
| static void pvc_setup(struct net_device *dev) |
| { |
| dev->type = ARPHRD_DLCI; |
| dev->flags = IFF_POINTOPOINT; |
| dev->hard_header_len = 10; |
| dev->addr_len = 2; |
| dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; |
| } |
| |
| static const struct net_device_ops pvc_ops = { |
| .ndo_open = pvc_open, |
| .ndo_stop = pvc_close, |
| .ndo_change_mtu = hdlc_change_mtu, |
| .ndo_start_xmit = pvc_xmit, |
| .ndo_do_ioctl = pvc_ioctl, |
| }; |
| |
| static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(frad); |
| pvc_device *pvc; |
| struct net_device *dev; |
| int used; |
| |
| if ((pvc = add_pvc(frad, dlci)) == NULL) { |
| printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n", |
| frad->name); |
| return -ENOBUFS; |
| } |
| |
| if (*get_dev_p(pvc, type)) |
| return -EEXIST; |
| |
| used = pvc_is_used(pvc); |
| |
| if (type == ARPHRD_ETHER) { |
| dev = alloc_netdev(0, "pvceth%d", ether_setup); |
| dev->priv_flags &= ~IFF_TX_SKB_SHARING; |
| } else |
| dev = alloc_netdev(0, "pvc%d", pvc_setup); |
| |
| if (!dev) { |
| printk(KERN_WARNING "%s: Memory squeeze on fr_pvc()\n", |
| frad->name); |
| delete_unused_pvcs(hdlc); |
| return -ENOBUFS; |
| } |
| |
| if (type == ARPHRD_ETHER) |
| random_ether_addr(dev->dev_addr); |
| else { |
| *(__be16*)dev->dev_addr = htons(dlci); |
| dlci_to_q922(dev->broadcast, dlci); |
| } |
| dev->netdev_ops = &pvc_ops; |
| dev->mtu = HDLC_MAX_MTU; |
| dev->tx_queue_len = 0; |
| dev->ml_priv = pvc; |
| |
| if (register_netdevice(dev) != 0) { |
| free_netdev(dev); |
| delete_unused_pvcs(hdlc); |
| return -EIO; |
| } |
| |
| dev->destructor = free_netdev; |
| *get_dev_p(pvc, type) = dev; |
| if (!used) { |
| state(hdlc)->dce_changed = 1; |
| state(hdlc)->dce_pvc_count++; |
| } |
| return 0; |
| } |
| |
| |
| |
| static int fr_del_pvc(hdlc_device *hdlc, unsigned int dlci, int type) |
| { |
| pvc_device *pvc; |
| struct net_device *dev; |
| |
| if ((pvc = find_pvc(hdlc, dlci)) == NULL) |
| return -ENOENT; |
| |
| if ((dev = *get_dev_p(pvc, type)) == NULL) |
| return -ENOENT; |
| |
| if (dev->flags & IFF_UP) |
| return -EBUSY; /* PVC in use */ |
| |
| unregister_netdevice(dev); /* the destructor will free_netdev(dev) */ |
| *get_dev_p(pvc, type) = NULL; |
| |
| if (!pvc_is_used(pvc)) { |
| state(hdlc)->dce_pvc_count--; |
| state(hdlc)->dce_changed = 1; |
| } |
| delete_unused_pvcs(hdlc); |
| return 0; |
| } |
| |
| |
| |
| static void fr_destroy(struct net_device *frad) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(frad); |
| pvc_device *pvc = state(hdlc)->first_pvc; |
| state(hdlc)->first_pvc = NULL; /* All PVCs destroyed */ |
| state(hdlc)->dce_pvc_count = 0; |
| state(hdlc)->dce_changed = 1; |
| |
| while (pvc) { |
| pvc_device *next = pvc->next; |
| /* destructors will free_netdev() main and ether */ |
| if (pvc->main) |
| unregister_netdevice(pvc->main); |
| |
| if (pvc->ether) |
| unregister_netdevice(pvc->ether); |
| |
| kfree(pvc); |
| pvc = next; |
| } |
| } |
| |
| |
| static struct hdlc_proto proto = { |
| .close = fr_close, |
| .start = fr_start, |
| .stop = fr_stop, |
| .detach = fr_destroy, |
| .ioctl = fr_ioctl, |
| .netif_rx = fr_rx, |
| .module = THIS_MODULE, |
| }; |
| |
| |
| static int fr_ioctl(struct net_device *dev, struct ifreq *ifr) |
| { |
| fr_proto __user *fr_s = ifr->ifr_settings.ifs_ifsu.fr; |
| const size_t size = sizeof(fr_proto); |
| fr_proto new_settings; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| fr_proto_pvc pvc; |
| int result; |
| |
| switch (ifr->ifr_settings.type) { |
| case IF_GET_PROTO: |
| if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ |
| return -EINVAL; |
| ifr->ifr_settings.type = IF_PROTO_FR; |
| if (ifr->ifr_settings.size < size) { |
| ifr->ifr_settings.size = size; /* data size wanted */ |
| return -ENOBUFS; |
| } |
| if (copy_to_user(fr_s, &state(hdlc)->settings, size)) |
| return -EFAULT; |
| return 0; |
| |
| case IF_PROTO_FR: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| if (copy_from_user(&new_settings, fr_s, size)) |
| return -EFAULT; |
| |
| if (new_settings.lmi == LMI_DEFAULT) |
| new_settings.lmi = LMI_ANSI; |
| |
| if ((new_settings.lmi != LMI_NONE && |
| new_settings.lmi != LMI_ANSI && |
| new_settings.lmi != LMI_CCITT && |
| new_settings.lmi != LMI_CISCO) || |
| new_settings.t391 < 1 || |
| new_settings.t392 < 2 || |
| new_settings.n391 < 1 || |
| new_settings.n392 < 1 || |
| new_settings.n393 < new_settings.n392 || |
| new_settings.n393 > 32 || |
| (new_settings.dce != 0 && |
| new_settings.dce != 1)) |
| return -EINVAL; |
| |
| result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); |
| if (result) |
| return result; |
| |
| if (dev_to_hdlc(dev)->proto != &proto) { /* Different proto */ |
| result = attach_hdlc_protocol(dev, &proto, |
| sizeof(struct frad_state)); |
| if (result) |
| return result; |
| state(hdlc)->first_pvc = NULL; |
| state(hdlc)->dce_pvc_count = 0; |
| } |
| memcpy(&state(hdlc)->settings, &new_settings, size); |
| dev->type = ARPHRD_FRAD; |
| return 0; |
| |
| case IF_PROTO_FR_ADD_PVC: |
| case IF_PROTO_FR_DEL_PVC: |
| case IF_PROTO_FR_ADD_ETH_PVC: |
| case IF_PROTO_FR_DEL_ETH_PVC: |
| if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ |
| return -EINVAL; |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (copy_from_user(&pvc, ifr->ifr_settings.ifs_ifsu.fr_pvc, |
| sizeof(fr_proto_pvc))) |
| return -EFAULT; |
| |
| if (pvc.dlci <= 0 || pvc.dlci >= 1024) |
| return -EINVAL; /* Only 10 bits, DLCI 0 reserved */ |
| |
| if (ifr->ifr_settings.type == IF_PROTO_FR_ADD_ETH_PVC || |
| ifr->ifr_settings.type == IF_PROTO_FR_DEL_ETH_PVC) |
| result = ARPHRD_ETHER; /* bridged Ethernet device */ |
| else |
| result = ARPHRD_DLCI; |
| |
| if (ifr->ifr_settings.type == IF_PROTO_FR_ADD_PVC || |
| ifr->ifr_settings.type == IF_PROTO_FR_ADD_ETH_PVC) |
| return fr_add_pvc(dev, pvc.dlci, result); |
| else |
| return fr_del_pvc(hdlc, pvc.dlci, result); |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| static int __init mod_init(void) |
| { |
| register_hdlc_protocol(&proto); |
| return 0; |
| } |
| |
| |
| static void __exit mod_exit(void) |
| { |
| unregister_hdlc_protocol(&proto); |
| } |
| |
| |
| module_init(mod_init); |
| module_exit(mod_exit); |
| |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); |
| MODULE_DESCRIPTION("Frame-Relay protocol support for generic HDLC"); |
| MODULE_LICENSE("GPL v2"); |