| #ifndef __PMAC_PFUNC_H__ |
| #define __PMAC_PFUNC_H__ |
| |
| #include <linux/types.h> |
| #include <linux/list.h> |
| |
| /* Flags in command lists */ |
| #define PMF_FLAGS_ON_INIT 0x80000000u |
| #define PMF_FLGAS_ON_TERM 0x40000000u |
| #define PMF_FLAGS_ON_SLEEP 0x20000000u |
| #define PMF_FLAGS_ON_WAKE 0x10000000u |
| #define PMF_FLAGS_ON_DEMAND 0x08000000u |
| #define PMF_FLAGS_INT_GEN 0x04000000u |
| #define PMF_FLAGS_HIGH_SPEED 0x02000000u |
| #define PMF_FLAGS_LOW_SPEED 0x01000000u |
| #define PMF_FLAGS_SIDE_EFFECTS 0x00800000u |
| |
| /* |
| * Arguments to a platform function call. |
| * |
| * NOTE: By convention, pointer arguments point to an u32 |
| */ |
| struct pmf_args { |
| union { |
| u32 v; |
| u32 *p; |
| } u[4]; |
| unsigned int count; |
| }; |
| |
| /* |
| * A driver capable of interpreting commands provides a handlers |
| * structure filled with whatever handlers are implemented by this |
| * driver. Non implemented handlers are left NULL. |
| * |
| * PMF_STD_ARGS are the same arguments that are passed to the parser |
| * and that gets passed back to the various handlers. |
| * |
| * Interpreting a given function always start with a begin() call which |
| * returns an instance data to be passed around subsequent calls, and |
| * ends with an end() call. This allows the low level driver to implement |
| * locking policy or per-function instance data. |
| * |
| * For interrupt capable functions, irq_enable() is called when a client |
| * registers, and irq_disable() is called when the last client unregisters |
| * Note that irq_enable & irq_disable are called within a semaphore held |
| * by the core, thus you should not try to register yourself to some other |
| * pmf interrupt during those calls. |
| */ |
| |
| #define PMF_STD_ARGS struct pmf_function *func, void *instdata, \ |
| struct pmf_args *args |
| |
| struct pmf_function; |
| |
| struct pmf_handlers { |
| void * (*begin)(struct pmf_function *func, struct pmf_args *args); |
| void (*end)(struct pmf_function *func, void *instdata); |
| |
| int (*irq_enable)(struct pmf_function *func); |
| int (*irq_disable)(struct pmf_function *func); |
| |
| int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask); |
| int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor); |
| |
| int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); |
| int (*read_reg32)(PMF_STD_ARGS, u32 offset); |
| int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); |
| int (*read_reg16)(PMF_STD_ARGS, u32 offset); |
| int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); |
| int (*read_reg8)(PMF_STD_ARGS, u32 offset); |
| |
| int (*delay)(PMF_STD_ARGS, u32 duration); |
| |
| int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask); |
| int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask); |
| int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask); |
| |
| int (*read_i2c)(PMF_STD_ARGS, u32 len); |
| int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data); |
| int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen, |
| const u8 *maskdata, const u8 *valuedata); |
| |
| int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len); |
| int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data); |
| int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen, |
| u32 totallen, const u8 *maskdata, const u8 *valuedata); |
| |
| int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len); |
| int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data); |
| int (*set_i2c_mode)(PMF_STD_ARGS, int mode); |
| int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen, |
| u32 totallen, const u8 *maskdata, |
| const u8 *valuedata); |
| |
| int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, |
| u32 xor); |
| int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, |
| u32 xor); |
| int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift, |
| u32 xor); |
| |
| int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); |
| int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); |
| int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask); |
| |
| int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata, |
| const u8 *valuedata); |
| |
| struct module *owner; |
| }; |
| |
| |
| /* |
| * Drivers who expose platform functions register at init time, this |
| * causes the platform functions for that device node to be parsed in |
| * advance and associated with the device. The data structures are |
| * partially public so a driver can walk the list of platform functions |
| * and eventually inspect the flags |
| */ |
| struct pmf_device; |
| |
| struct pmf_function { |
| /* All functions for a given driver are linked */ |
| struct list_head link; |
| |
| /* Function node & driver data */ |
| struct device_node *node; |
| void *driver_data; |
| |
| /* For internal use by core */ |
| struct pmf_device *dev; |
| |
| /* The name is the "xxx" in "platform-do-xxx", this is how |
| * platform functions are identified by this code. Some functions |
| * only operate for a given target, in which case the phandle is |
| * here (or 0 if the filter doesn't apply) |
| */ |
| const char *name; |
| u32 phandle; |
| |
| /* The flags for that function. You can have several functions |
| * with the same name and different flag |
| */ |
| u32 flags; |
| |
| /* The actual tokenized function blob */ |
| const void *data; |
| unsigned int length; |
| |
| /* Interrupt clients */ |
| struct list_head irq_clients; |
| |
| /* Refcounting */ |
| struct kref ref; |
| }; |
| |
| /* |
| * For platform functions that are interrupts, one can register |
| * irq_client structures. You canNOT use the same structure twice |
| * as it contains a link member. Also, the callback is called with |
| * a spinlock held, you must not call back into any of the pmf_* functions |
| * from within that callback |
| */ |
| struct pmf_irq_client { |
| void (*handler)(void *data); |
| void *data; |
| struct module *owner; |
| struct list_head link; |
| }; |
| |
| |
| /* |
| * Register/Unregister a function-capable driver and its handlers |
| */ |
| extern int pmf_register_driver(struct device_node *np, |
| struct pmf_handlers *handlers, |
| void *driverdata); |
| |
| extern void pmf_unregister_driver(struct device_node *np); |
| |
| |
| /* |
| * Register/Unregister interrupt clients |
| */ |
| extern int pmf_register_irq_client(struct device_node *np, |
| const char *name, |
| struct pmf_irq_client *client); |
| |
| extern void pmf_unregister_irq_client(struct device_node *np, |
| const char *name, |
| struct pmf_irq_client *client); |
| |
| /* |
| * Called by the handlers when an irq happens |
| */ |
| extern void pmf_do_irq(struct pmf_function *func); |
| |
| |
| /* |
| * Low level call to platform functions. |
| * |
| * The phandle can filter on the target object for functions that have |
| * multiple targets, the flags allow you to restrict the call to a given |
| * combination of flags. |
| * |
| * The args array contains as many arguments as is required by the function, |
| * this is dependent on the function you are calling, unfortunately Apple |
| * mecanism provides no way to encode that so you have to get it right at |
| * the call site. Some functions require no args, in which case, you can |
| * pass NULL. |
| * |
| * You can also pass NULL to the name. This will match any function that has |
| * the appropriate combination of flags & phandle or you can pass 0 to the |
| * phandle to match any |
| */ |
| extern int pmf_do_functions(struct device_node *np, const char *name, |
| u32 phandle, u32 flags, struct pmf_args *args); |
| |
| |
| |
| /* |
| * High level call to a platform function. |
| * |
| * This one looks for the platform-xxx first so you should call it to the |
| * actual target if any. It will fallback to platform-do-xxx if it can't |
| * find one. It will also exclusively target functions that have |
| * the "OnDemand" flag. |
| */ |
| |
| extern int pmf_call_function(struct device_node *target, const char *name, |
| struct pmf_args *args); |
| |
| |
| /* |
| * For low latency interrupt usage, you can lookup for on-demand functions |
| * using the functions below |
| */ |
| |
| extern struct pmf_function *pmf_find_function(struct device_node *target, |
| const char *name); |
| |
| extern struct pmf_function * pmf_get_function(struct pmf_function *func); |
| extern void pmf_put_function(struct pmf_function *func); |
| |
| extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args); |
| |
| |
| /* Suspend/resume code called by via-pmu directly for now */ |
| extern void pmac_pfunc_base_suspend(void); |
| extern void pmac_pfunc_base_resume(void); |
| |
| #endif /* __PMAC_PFUNC_H__ */ |