| /****************************************************************************/ |
| |
| /* |
| * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. |
| * |
| * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) |
| */ |
| |
| /****************************************************************************/ |
| #ifndef m528xsim_h |
| #define m528xsim_h |
| /****************************************************************************/ |
| |
| |
| /* |
| * Define the 5280/5282 SIM register set addresses. |
| */ |
| #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ |
| #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ |
| #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ |
| #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ |
| #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ |
| #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ |
| #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ |
| #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ |
| #define MCFINTC_IRLR 0x18 /* */ |
| #define MCFINTC_IACKL 0x19 /* */ |
| #define MCFINTC_ICR0 0x40 /* Base ICR register */ |
| |
| #define MCFINT_VECBASE 64 /* Vector base number */ |
| #define MCFINT_UART0 13 /* Interrupt number for UART0 */ |
| #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ |
| #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ |
| |
| /* |
| * SDRAM configuration registers. |
| */ |
| #define MCFSIM_DCR 0x44 /* SDRAM control */ |
| #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ |
| #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ |
| #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ |
| #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ |
| |
| /* |
| * GPIO registers |
| */ |
| #define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000) |
| #define MCFGPIO_PORTB (MCF_IPSBAR + 0x00100001) |
| #define MCFGPIO_PORTC (MCF_IPSBAR + 0x00100002) |
| #define MCFGPIO_PORTD (MCF_IPSBAR + 0x00100003) |
| #define MCFGPIO_PORTE (MCF_IPSBAR + 0x00100004) |
| #define MCFGPIO_PORTF (MCF_IPSBAR + 0x00100005) |
| #define MCFGPIO_PORTG (MCF_IPSBAR + 0x00100006) |
| #define MCFGPIO_PORTH (MCF_IPSBAR + 0x00100007) |
| #define MCFGPIO_PORTJ (MCF_IPSBAR + 0x00100008) |
| #define MCFGPIO_PORTDD (MCF_IPSBAR + 0x00100009) |
| #define MCFGPIO_PORTEH (MCF_IPSBAR + 0x0010000A) |
| #define MCFGPIO_PORTEL (MCF_IPSBAR + 0x0010000B) |
| #define MCFGPIO_PORTAS (MCF_IPSBAR + 0x0010000C) |
| #define MCFGPIO_PORTQS (MCF_IPSBAR + 0x0010000D) |
| #define MCFGPIO_PORTSD (MCF_IPSBAR + 0x0010000E) |
| #define MCFGPIO_PORTTC (MCF_IPSBAR + 0x0010000F) |
| #define MCFGPIO_PORTTD (MCF_IPSBAR + 0x00100010) |
| #define MCFGPIO_PORTUA (MCF_IPSBAR + 0x00100011) |
| |
| #define MCFGPIO_DDRA (MCF_IPSBAR + 0x00100014) |
| #define MCFGPIO_DDRB (MCF_IPSBAR + 0x00100015) |
| #define MCFGPIO_DDRC (MCF_IPSBAR + 0x00100016) |
| #define MCFGPIO_DDRD (MCF_IPSBAR + 0x00100017) |
| #define MCFGPIO_DDRE (MCF_IPSBAR + 0x00100018) |
| #define MCFGPIO_DDRF (MCF_IPSBAR + 0x00100019) |
| #define MCFGPIO_DDRG (MCF_IPSBAR + 0x0010001A) |
| #define MCFGPIO_DDRH (MCF_IPSBAR + 0x0010001B) |
| #define MCFGPIO_DDRJ (MCF_IPSBAR + 0x0010001C) |
| #define MCFGPIO_DDRDD (MCF_IPSBAR + 0x0010001D) |
| #define MCFGPIO_DDREH (MCF_IPSBAR + 0x0010001E) |
| #define MCFGPIO_DDREL (MCF_IPSBAR + 0x0010001F) |
| #define MCFGPIO_DDRAS (MCF_IPSBAR + 0x00100020) |
| #define MCFGPIO_DDRQS (MCF_IPSBAR + 0x00100021) |
| #define MCFGPIO_DDRSD (MCF_IPSBAR + 0x00100022) |
| #define MCFGPIO_DDRTC (MCF_IPSBAR + 0x00100023) |
| #define MCFGPIO_DDRTD (MCF_IPSBAR + 0x00100024) |
| #define MCFGPIO_DDRUA (MCF_IPSBAR + 0x00100025) |
| |
| #define MCFGPIO_PORTAP (MCF_IPSBAR + 0x00100028) |
| #define MCFGPIO_PORTBP (MCF_IPSBAR + 0x00100029) |
| #define MCFGPIO_PORTCP (MCF_IPSBAR + 0x0010002A) |
| #define MCFGPIO_PORTDP (MCF_IPSBAR + 0x0010002B) |
| #define MCFGPIO_PORTEP (MCF_IPSBAR + 0x0010002C) |
| #define MCFGPIO_PORTFP (MCF_IPSBAR + 0x0010002D) |
| #define MCFGPIO_PORTGP (MCF_IPSBAR + 0x0010002E) |
| #define MCFGPIO_PORTHP (MCF_IPSBAR + 0x0010002F) |
| #define MCFGPIO_PORTJP (MCF_IPSBAR + 0x00100030) |
| #define MCFGPIO_PORTDDP (MCF_IPSBAR + 0x00100031) |
| #define MCFGPIO_PORTEHP (MCF_IPSBAR + 0x00100032) |
| #define MCFGPIO_PORTELP (MCF_IPSBAR + 0x00100033) |
| #define MCFGPIO_PORTASP (MCF_IPSBAR + 0x00100034) |
| #define MCFGPIO_PORTQSP (MCF_IPSBAR + 0x00100035) |
| #define MCFGPIO_PORTSDP (MCF_IPSBAR + 0x00100036) |
| #define MCFGPIO_PORTTCP (MCF_IPSBAR + 0x00100037) |
| #define MCFGPIO_PORTTDP (MCF_IPSBAR + 0x00100038) |
| #define MCFGPIO_PORTUAP (MCF_IPSBAR + 0x00100039) |
| |
| #define MCFGPIO_SETA (MCF_IPSBAR + 0x00100028) |
| #define MCFGPIO_SETB (MCF_IPSBAR + 0x00100029) |
| #define MCFGPIO_SETC (MCF_IPSBAR + 0x0010002A) |
| #define MCFGPIO_SETD (MCF_IPSBAR + 0x0010002B) |
| #define MCFGPIO_SETE (MCF_IPSBAR + 0x0010002C) |
| #define MCFGPIO_SETF (MCF_IPSBAR + 0x0010002D) |
| #define MCFGPIO_SETG (MCF_IPSBAR + 0x0010002E) |
| #define MCFGPIO_SETH (MCF_IPSBAR + 0x0010002F) |
| #define MCFGPIO_SETJ (MCF_IPSBAR + 0x00100030) |
| #define MCFGPIO_SETDD (MCF_IPSBAR + 0x00100031) |
| #define MCFGPIO_SETEH (MCF_IPSBAR + 0x00100032) |
| #define MCFGPIO_SETEL (MCF_IPSBAR + 0x00100033) |
| #define MCFGPIO_SETAS (MCF_IPSBAR + 0x00100034) |
| #define MCFGPIO_SETQS (MCF_IPSBAR + 0x00100035) |
| #define MCFGPIO_SETSD (MCF_IPSBAR + 0x00100036) |
| #define MCFGPIO_SETTC (MCF_IPSBAR + 0x00100037) |
| #define MCFGPIO_SETTD (MCF_IPSBAR + 0x00100038) |
| #define MCFGPIO_SETUA (MCF_IPSBAR + 0x00100039) |
| |
| #define MCFGPIO_CLRA (MCF_IPSBAR + 0x0010003C) |
| #define MCFGPIO_CLRB (MCF_IPSBAR + 0x0010003D) |
| #define MCFGPIO_CLRC (MCF_IPSBAR + 0x0010003E) |
| #define MCFGPIO_CLRD (MCF_IPSBAR + 0x0010003F) |
| #define MCFGPIO_CLRE (MCF_IPSBAR + 0x00100040) |
| #define MCFGPIO_CLRF (MCF_IPSBAR + 0x00100041) |
| #define MCFGPIO_CLRG (MCF_IPSBAR + 0x00100042) |
| #define MCFGPIO_CLRH (MCF_IPSBAR + 0x00100043) |
| #define MCFGPIO_CLRJ (MCF_IPSBAR + 0x00100044) |
| #define MCFGPIO_CLRDD (MCF_IPSBAR + 0x00100045) |
| #define MCFGPIO_CLREH (MCF_IPSBAR + 0x00100046) |
| #define MCFGPIO_CLREL (MCF_IPSBAR + 0x00100047) |
| #define MCFGPIO_CLRAS (MCF_IPSBAR + 0x00100048) |
| #define MCFGPIO_CLRQS (MCF_IPSBAR + 0x00100049) |
| #define MCFGPIO_CLRSD (MCF_IPSBAR + 0x0010004A) |
| #define MCFGPIO_CLRTC (MCF_IPSBAR + 0x0010004B) |
| #define MCFGPIO_CLRTD (MCF_IPSBAR + 0x0010004C) |
| #define MCFGPIO_CLRUA (MCF_IPSBAR + 0x0010004D) |
| |
| #define MCFGPIO_PBCDPAR (MCF_IPSBAR + 0x00100050) |
| #define MCFGPIO_PFPAR (MCF_IPSBAR + 0x00100051) |
| #define MCFGPIO_PEPAR (MCF_IPSBAR + 0x00100052) |
| #define MCFGPIO_PJPAR (MCF_IPSBAR + 0x00100054) |
| #define MCFGPIO_PSDPAR (MCF_IPSBAR + 0x00100055) |
| #define MCFGPIO_PASPAR (MCF_IPSBAR + 0x00100056) |
| #define MCFGPIO_PEHLPAR (MCF_IPSBAR + 0x00100058) |
| #define MCFGPIO_PQSPAR (MCF_IPSBAR + 0x00100059) |
| #define MCFGPIO_PTCPAR (MCF_IPSBAR + 0x0010005A) |
| #define MCFGPIO_PTDPAR (MCF_IPSBAR + 0x0010005B) |
| #define MCFGPIO_PUAPAR (MCF_IPSBAR + 0x0010005C) |
| |
| /* |
| * Edge Port registers |
| */ |
| #define MCFEPORT_EPPAR (MCF_IPSBAR + 0x00130000) |
| #define MCFEPORT_EPDDR (MCF_IPSBAR + 0x00130002) |
| #define MCFEPORT_EPIER (MCF_IPSBAR + 0x00130003) |
| #define MCFEPORT_EPDR (MCF_IPSBAR + 0x00130004) |
| #define MCFEPORT_EPPDR (MCF_IPSBAR + 0x00130005) |
| #define MCFEPORT_EPFR (MCF_IPSBAR + 0x00130006) |
| |
| /* |
| * Queued ADC registers |
| */ |
| #define MCFQADC_PORTQA (MCF_IPSBAR + 0x00190006) |
| #define MCFQADC_PORTQB (MCF_IPSBAR + 0x00190007) |
| #define MCFQADC_DDRQA (MCF_IPSBAR + 0x00190008) |
| #define MCFQADC_DDRQB (MCF_IPSBAR + 0x00190009) |
| |
| /* |
| * General Purpose Timers registers |
| */ |
| #define MCFGPTA_GPTPORT (MCF_IPSBAR + 0x001A001D) |
| #define MCFGPTA_GPTDDR (MCF_IPSBAR + 0x001A001E) |
| #define MCFGPTB_GPTPORT (MCF_IPSBAR + 0x001B001D) |
| #define MCFGPTB_GPTDDR (MCF_IPSBAR + 0x001B001E) |
| /* |
| * |
| * definitions for generic gpio support |
| * |
| */ |
| #define MCFGPIO_PODR MCFGPIO_PORTA /* port output data */ |
| #define MCFGPIO_PDDR MCFGPIO_DDRA /* port data direction */ |
| #define MCFGPIO_PPDR MCFGPIO_PORTAP /* port pin data */ |
| #define MCFGPIO_SETR MCFGPIO_SETA /* set output */ |
| #define MCFGPIO_CLRR MCFGPIO_CLRA /* clr output */ |
| |
| #define MCFGPIO_IRQ_MAX 8 |
| #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE |
| #define MCFGPIO_PIN_MAX 180 |
| |
| |
| /* |
| * Derek Cheung - 6 Feb 2005 |
| * add I2C and QSPI register definition using Freescale's MCF5282 |
| */ |
| /* set Port AS pin for I2C or UART */ |
| #define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) |
| |
| /* Port UA Pin Assignment Register (8 Bit) */ |
| #define MCF5282_GPIO_PUAPAR 0x10005C |
| |
| /* Interrupt Mask Register Register Low */ |
| #define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) |
| /* Interrupt Control Register 7 */ |
| #define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) |
| |
| |
| /* |
| * Reset Control Unit (relative to IPSBAR). |
| */ |
| #define MCF_RCR 0x110000 |
| #define MCF_RSR 0x110001 |
| |
| #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ |
| #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ |
| |
| /********************************************************************* |
| * |
| * Inter-IC (I2C) Module |
| * |
| *********************************************************************/ |
| /* Read/Write access macros for general use */ |
| #define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address |
| #define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider |
| #define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control |
| #define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status |
| #define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O |
| |
| /* Bit level definitions and macros */ |
| #define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) |
| |
| #define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) |
| |
| #define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable |
| #define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable |
| #define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode |
| #define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode |
| #define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable |
| #define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start |
| |
| #define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit |
| #define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave |
| #define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy |
| #define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost |
| #define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write |
| #define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt |
| #define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge |
| |
| |
| #endif /* m528xsim_h */ |