| /****************************************************************************** |
| * |
| * Module Name: tbconvrt - ACPI Table conversion utilities |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2006, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #include <acpi/acpi.h> |
| #include <acpi/actables.h> |
| |
| #define _COMPONENT ACPI_TABLES |
| ACPI_MODULE_NAME("tbconvrt") |
| |
| /* Local prototypes */ |
| static void |
| acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct, |
| u8 register_bit_width, |
| acpi_physical_address address); |
| |
| static void |
| acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt, |
| struct fadt_descriptor_rev1 *original_fadt); |
| |
| static void |
| acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt, |
| struct fadt_descriptor *original_fadt); |
| |
| u8 acpi_fadt_is_v1; |
| ACPI_EXPORT_SYMBOL(acpi_fadt_is_v1) |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_get_table_count |
| * |
| * PARAMETERS: RSDP - Pointer to the RSDP |
| * RSDT - Pointer to the RSDT/XSDT |
| * |
| * RETURN: The number of tables pointed to by the RSDT or XSDT. |
| * |
| * DESCRIPTION: Calculate the number of tables. Automatically handles either |
| * an RSDT or XSDT. |
| * |
| ******************************************************************************/ |
| |
| u32 |
| acpi_tb_get_table_count(struct rsdp_descriptor *RSDP, |
| struct acpi_table_header *RSDT) |
| { |
| u32 pointer_size; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* RSDT pointers are 32 bits, XSDT pointers are 64 bits */ |
| |
| if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) { |
| pointer_size = sizeof(u32); |
| } else { |
| pointer_size = sizeof(u64); |
| } |
| |
| /* |
| * Determine the number of tables pointed to by the RSDT/XSDT. |
| * This is defined by the ACPI Specification to be the number of |
| * pointers contained within the RSDT/XSDT. The size of the pointers |
| * is architecture-dependent. |
| */ |
| return ((RSDT->length - |
| sizeof(struct acpi_table_header)) / pointer_size); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_convert_to_xsdt |
| * |
| * PARAMETERS: table_info - Info about the RSDT |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Convert an RSDT to an XSDT (internal common format) |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_tb_convert_to_xsdt(struct acpi_table_desc *table_info) |
| { |
| acpi_size table_size; |
| u32 i; |
| struct xsdt_descriptor *new_table; |
| |
| ACPI_FUNCTION_ENTRY(); |
| |
| /* Compute size of the converted XSDT */ |
| |
| table_size = ((acpi_size) acpi_gbl_rsdt_table_count * sizeof(u64)) + |
| sizeof(struct acpi_table_header); |
| |
| /* Allocate an XSDT */ |
| |
| new_table = ACPI_ALLOCATE_ZEROED(table_size); |
| if (!new_table) { |
| return (AE_NO_MEMORY); |
| } |
| |
| /* Copy the header and set the length */ |
| |
| ACPI_MEMCPY(new_table, table_info->pointer, |
| sizeof(struct acpi_table_header)); |
| new_table->length = (u32) table_size; |
| |
| /* Copy the table pointers */ |
| |
| for (i = 0; i < acpi_gbl_rsdt_table_count; i++) { |
| |
| /* RSDT pointers are 32 bits, XSDT pointers are 64 bits */ |
| |
| if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) { |
| ACPI_STORE_ADDRESS(new_table->table_offset_entry[i], |
| (ACPI_CAST_PTR |
| (struct rsdt_descriptor, |
| table_info->pointer))-> |
| table_offset_entry[i]); |
| } else { |
| new_table->table_offset_entry[i] = |
| (ACPI_CAST_PTR(struct xsdt_descriptor, |
| table_info->pointer))-> |
| table_offset_entry[i]; |
| } |
| } |
| |
| /* Delete the original table (either mapped or in a buffer) */ |
| |
| acpi_tb_delete_single_table(table_info); |
| |
| /* Point the table descriptor to the new table */ |
| |
| table_info->pointer = |
| ACPI_CAST_PTR(struct acpi_table_header, new_table); |
| table_info->length = table_size; |
| table_info->allocation = ACPI_MEM_ALLOCATED; |
| |
| return (AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_init_generic_address |
| * |
| * PARAMETERS: new_gas_struct - GAS struct to be initialized |
| * register_bit_width - Width of this register |
| * Address - Address of the register |
| * |
| * RETURN: None |
| * |
| * DESCRIPTION: Initialize a GAS structure. |
| * |
| ******************************************************************************/ |
| |
| static void |
| acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct, |
| u8 register_bit_width, |
| acpi_physical_address address) |
| { |
| |
| ACPI_STORE_ADDRESS(new_gas_struct->address, address); |
| |
| new_gas_struct->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO; |
| new_gas_struct->register_bit_width = register_bit_width; |
| new_gas_struct->register_bit_offset = 0; |
| new_gas_struct->access_width = 0; |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_convert_fadt1 |
| * |
| * PARAMETERS: local_fadt - Pointer to new FADT |
| * original_fadt - Pointer to old FADT |
| * |
| * RETURN: None, populates local_fadt |
| * |
| * DESCRIPTION: Convert an ACPI 1.0 FADT to common internal format |
| * |
| ******************************************************************************/ |
| |
| static void |
| acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt, |
| struct fadt_descriptor_rev1 *original_fadt) |
| { |
| |
| /* ACPI 1.0 FACS */ |
| /* The BIOS stored FADT should agree with Revision 1.0 */ |
| acpi_fadt_is_v1 = 1; |
| |
| /* |
| * Copy the table header and the common part of the tables. |
| * |
| * The 2.0 table is an extension of the 1.0 table, so the entire 1.0 |
| * table can be copied first, then expand some fields to 64 bits. |
| */ |
| ACPI_MEMCPY(local_fadt, original_fadt, |
| sizeof(struct fadt_descriptor_rev1)); |
| |
| /* Convert table pointers to 64-bit fields */ |
| |
| ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl, |
| local_fadt->V1_firmware_ctrl); |
| ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt); |
| |
| /* |
| * System Interrupt Model isn't used in ACPI 2.0 |
| * (local_fadt->Reserved1 = 0;) |
| */ |
| |
| /* |
| * This field is set by the OEM to convey the preferred power management |
| * profile to OSPM. It doesn't have any 1.0 equivalence. Since we don't |
| * know what kind of 32-bit system this is, we will use "unspecified". |
| */ |
| local_fadt->prefer_PM_profile = PM_UNSPECIFIED; |
| |
| /* |
| * Processor Performance State Control. This is the value OSPM writes to |
| * the SMI_CMD register to assume processor performance state control |
| * responsibility. There isn't any equivalence in 1.0, but as many 1.x |
| * ACPI tables contain _PCT and _PSS we also keep this value, unless |
| * acpi_strict is set. |
| */ |
| if (acpi_strict) |
| local_fadt->pstate_cnt = 0; |
| |
| /* |
| * Support for the _CST object and C States change notification. |
| * This data item hasn't any 1.0 equivalence so leave it zero. |
| */ |
| local_fadt->cst_cnt = 0; |
| |
| /* |
| * FADT Rev 2 was an interim FADT released between ACPI 1.0 and ACPI 2.0. |
| * It primarily adds the FADT reset mechanism. |
| */ |
| if ((original_fadt->revision == 2) && |
| (original_fadt->length == |
| sizeof(struct fadt_descriptor_rev2_minus))) { |
| /* |
| * Grab the entire generic address struct, plus the 1-byte reset value |
| * that immediately follows. |
| */ |
| ACPI_MEMCPY(&local_fadt->reset_register, |
| &(ACPI_CAST_PTR(struct fadt_descriptor_rev2_minus, |
| original_fadt))->reset_register, |
| sizeof(struct acpi_generic_address) + 1); |
| } else { |
| /* |
| * Since there isn't any equivalence in 1.0 and since it is highly |
| * likely that a 1.0 system has legacy support. |
| */ |
| local_fadt->iapc_boot_arch = BAF_LEGACY_DEVICES; |
| } |
| |
| /* |
| * Convert the V1.0 block addresses to V2.0 GAS structures |
| */ |
| acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk, |
| local_fadt->pm1_evt_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm1a_evt_blk); |
| acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk, |
| local_fadt->pm1_evt_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm1b_evt_blk); |
| acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk, |
| local_fadt->pm1_cnt_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm1a_cnt_blk); |
| acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk, |
| local_fadt->pm1_cnt_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm1b_cnt_blk); |
| acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk, |
| local_fadt->pm2_cnt_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm2_cnt_blk); |
| acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk, |
| local_fadt->pm_tm_len, |
| (acpi_physical_address) local_fadt-> |
| V1_pm_tmr_blk); |
| acpi_tb_init_generic_address(&local_fadt->xgpe0_blk, 0, |
| (acpi_physical_address) local_fadt-> |
| V1_gpe0_blk); |
| acpi_tb_init_generic_address(&local_fadt->xgpe1_blk, 0, |
| (acpi_physical_address) local_fadt-> |
| V1_gpe1_blk); |
| |
| /* Create separate GAS structs for the PM1 Enable registers */ |
| |
| acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable, |
| (u8) ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len), |
| (acpi_physical_address) |
| (local_fadt->xpm1a_evt_blk.address + |
| ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len))); |
| |
| /* PM1B is optional; leave null if not present */ |
| |
| if (local_fadt->xpm1b_evt_blk.address) { |
| acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, |
| (u8) ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len), |
| (acpi_physical_address) |
| (local_fadt->xpm1b_evt_blk. |
| address + |
| ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len))); |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_convert_fadt2 |
| * |
| * PARAMETERS: local_fadt - Pointer to new FADT |
| * original_fadt - Pointer to old FADT |
| * |
| * RETURN: None, populates local_fadt |
| * |
| * DESCRIPTION: Convert an ACPI 2.0 FADT to common internal format. |
| * Handles optional "X" fields. |
| * |
| ******************************************************************************/ |
| |
| static void |
| acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt, |
| struct fadt_descriptor *original_fadt) |
| { |
| |
| /* We have an ACPI 2.0 FADT but we must copy it to our local buffer */ |
| |
| ACPI_MEMCPY(local_fadt, original_fadt, sizeof(struct fadt_descriptor)); |
| |
| /* |
| * "X" fields are optional extensions to the original V1.0 fields, so |
| * we must selectively expand V1.0 fields if the corresponding X field |
| * is zero. |
| */ |
| if (!(local_fadt->xfirmware_ctrl)) { |
| ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl, |
| local_fadt->V1_firmware_ctrl); |
| } |
| |
| if (!(local_fadt->Xdsdt)) { |
| ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt); |
| } |
| |
| if (!(local_fadt->xpm1a_evt_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk, |
| local_fadt->pm1_evt_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm1a_evt_blk); |
| } |
| |
| if (!(local_fadt->xpm1b_evt_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk, |
| local_fadt->pm1_evt_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm1b_evt_blk); |
| } |
| |
| if (!(local_fadt->xpm1a_cnt_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk, |
| local_fadt->pm1_cnt_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm1a_cnt_blk); |
| } |
| |
| if (!(local_fadt->xpm1b_cnt_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk, |
| local_fadt->pm1_cnt_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm1b_cnt_blk); |
| } |
| |
| if (!(local_fadt->xpm2_cnt_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk, |
| local_fadt->pm2_cnt_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm2_cnt_blk); |
| } |
| |
| if (!(local_fadt->xpm_tmr_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk, |
| local_fadt->pm_tm_len, |
| (acpi_physical_address) |
| local_fadt->V1_pm_tmr_blk); |
| } |
| |
| if (!(local_fadt->xgpe0_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xgpe0_blk, |
| 0, |
| (acpi_physical_address) |
| local_fadt->V1_gpe0_blk); |
| } |
| |
| if (!(local_fadt->xgpe1_blk.address)) { |
| acpi_tb_init_generic_address(&local_fadt->xgpe1_blk, |
| 0, |
| (acpi_physical_address) |
| local_fadt->V1_gpe1_blk); |
| } |
| |
| /* Create separate GAS structs for the PM1 Enable registers */ |
| |
| acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable, |
| (u8) ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len), |
| (acpi_physical_address) |
| (local_fadt->xpm1a_evt_blk.address + |
| ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len))); |
| |
| acpi_gbl_xpm1a_enable.address_space_id = |
| local_fadt->xpm1a_evt_blk.address_space_id; |
| |
| /* PM1B is optional; leave null if not present */ |
| |
| if (local_fadt->xpm1b_evt_blk.address) { |
| acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, |
| (u8) ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len), |
| (acpi_physical_address) |
| (local_fadt->xpm1b_evt_blk. |
| address + |
| ACPI_DIV_2(acpi_gbl_FADT-> |
| pm1_evt_len))); |
| |
| acpi_gbl_xpm1b_enable.address_space_id = |
| local_fadt->xpm1b_evt_blk.address_space_id; |
| } |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_convert_table_fadt |
| * |
| * PARAMETERS: None |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Converts a BIOS supplied ACPI 1.0 FADT to a local |
| * ACPI 2.0 FADT. If the BIOS supplied a 2.0 FADT then it is simply |
| * copied to the local FADT. The ACPI CA software uses this |
| * local FADT. Thus a significant amount of special #ifdef |
| * type codeing is saved. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_tb_convert_table_fadt(void) |
| { |
| struct fadt_descriptor *local_fadt; |
| struct acpi_table_desc *table_desc; |
| |
| ACPI_FUNCTION_TRACE(tb_convert_table_fadt); |
| |
| /* |
| * acpi_gbl_FADT is valid. Validate the FADT length. The table must be |
| * at least as long as the version 1.0 FADT |
| */ |
| if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor_rev1)) { |
| ACPI_ERROR((AE_INFO, "FADT is invalid, too short: 0x%X", |
| acpi_gbl_FADT->length)); |
| return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); |
| } |
| |
| /* Allocate buffer for the ACPI 2.0(+) FADT */ |
| |
| local_fadt = ACPI_ALLOCATE_ZEROED(sizeof(struct fadt_descriptor)); |
| if (!local_fadt) { |
| return_ACPI_STATUS(AE_NO_MEMORY); |
| } |
| |
| if (acpi_gbl_FADT->revision >= FADT2_REVISION_ID) { |
| if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor)) { |
| |
| /* Length is too short to be a V2.0 table */ |
| |
| ACPI_WARNING((AE_INFO, |
| "Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table", |
| acpi_gbl_FADT->length, |
| acpi_gbl_FADT->revision)); |
| |
| acpi_tb_convert_fadt1(local_fadt, |
| (void *)acpi_gbl_FADT); |
| } else { |
| /* Valid V2.0 table */ |
| |
| acpi_tb_convert_fadt2(local_fadt, acpi_gbl_FADT); |
| } |
| } else { |
| /* Valid V1.0 table */ |
| |
| acpi_tb_convert_fadt1(local_fadt, (void *)acpi_gbl_FADT); |
| } |
| |
| /* Global FADT pointer will point to the new common V2.0 FADT */ |
| |
| acpi_gbl_FADT = local_fadt; |
| acpi_gbl_FADT->length = sizeof(struct fadt_descriptor); |
| |
| /* Free the original table */ |
| |
| table_desc = acpi_gbl_table_lists[ACPI_TABLE_ID_FADT].next; |
| acpi_tb_delete_single_table(table_desc); |
| |
| /* Install the new table */ |
| |
| table_desc->pointer = |
| ACPI_CAST_PTR(struct acpi_table_header, acpi_gbl_FADT); |
| table_desc->allocation = ACPI_MEM_ALLOCATED; |
| table_desc->length = sizeof(struct fadt_descriptor); |
| |
| /* Dump the entire FADT */ |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_TABLES, |
| "Hex dump of common internal FADT, size %d (%X)\n", |
| acpi_gbl_FADT->length, acpi_gbl_FADT->length)); |
| |
| ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_FADT), |
| acpi_gbl_FADT->length); |
| |
| return_ACPI_STATUS(AE_OK); |
| } |
| |
| /******************************************************************************* |
| * |
| * FUNCTION: acpi_tb_build_common_facs |
| * |
| * PARAMETERS: table_info - Info for currently installed FACS |
| * |
| * RETURN: Status |
| * |
| * DESCRIPTION: Convert ACPI 1.0 and ACPI 2.0 FACS to a common internal |
| * table format. |
| * |
| ******************************************************************************/ |
| |
| acpi_status acpi_tb_build_common_facs(struct acpi_table_desc *table_info) |
| { |
| |
| ACPI_FUNCTION_TRACE(tb_build_common_facs); |
| |
| /* Absolute minimum length is 24, but the ACPI spec says 64 */ |
| |
| if (acpi_gbl_FACS->length < 24) { |
| ACPI_ERROR((AE_INFO, "Invalid FACS table length: 0x%X", |
| acpi_gbl_FACS->length)); |
| return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH); |
| } |
| |
| if (acpi_gbl_FACS->length < 64) { |
| ACPI_WARNING((AE_INFO, |
| "FACS is shorter than the ACPI specification allows: 0x%X, using anyway", |
| acpi_gbl_FACS->length)); |
| } |
| |
| /* Copy fields to the new FACS */ |
| |
| acpi_gbl_common_fACS.global_lock = &(acpi_gbl_FACS->global_lock); |
| |
| if ((acpi_gbl_RSDP->revision < 2) || |
| (acpi_gbl_FACS->length < 32) || |
| (!(acpi_gbl_FACS->xfirmware_waking_vector))) { |
| |
| /* ACPI 1.0 FACS or short table or optional X_ field is zero */ |
| |
| acpi_gbl_common_fACS.firmware_waking_vector = ACPI_CAST_PTR(u64, |
| & |
| (acpi_gbl_FACS-> |
| firmware_waking_vector)); |
| acpi_gbl_common_fACS.vector_width = 32; |
| } else { |
| /* ACPI 2.0 FACS with valid X_ field */ |
| |
| acpi_gbl_common_fACS.firmware_waking_vector = |
| &acpi_gbl_FACS->xfirmware_waking_vector; |
| acpi_gbl_common_fACS.vector_width = 64; |
| } |
| |
| return_ACPI_STATUS(AE_OK); |
| } |