| /* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* add additional information to our printk's */ |
| #define pr_fmt(fmt) "%s: " fmt "\n", __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/kref.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/ratelimit.h> |
| #include <linux/uaccess.h> |
| #include <linux/usb.h> |
| #include <linux/debugfs.h> |
| #include <mach/diag_bridge.h> |
| |
| #define DRIVER_DESC "USB host diag bridge driver" |
| #define DRIVER_VERSION "1.0" |
| |
| #define MAX_DIAG_BRIDGE_DEVS 2 |
| #define AUTOSUSP_DELAY_WITH_USB 1000 |
| |
| struct diag_bridge { |
| struct usb_device *udev; |
| struct usb_interface *ifc; |
| struct usb_anchor submitted; |
| __u8 in_epAddr; |
| __u8 out_epAddr; |
| int err; |
| struct kref kref; |
| struct mutex ifc_mutex; |
| struct diag_bridge_ops *ops; |
| struct platform_device *pdev; |
| unsigned default_autosusp_delay; |
| int id; |
| |
| /* debugging counters */ |
| unsigned long bytes_to_host; |
| unsigned long bytes_to_mdm; |
| unsigned pending_reads; |
| unsigned pending_writes; |
| }; |
| struct diag_bridge *__dev[MAX_DIAG_BRIDGE_DEVS]; |
| |
| int diag_bridge_open(int id, struct diag_bridge_ops *ops) |
| { |
| struct diag_bridge *dev; |
| |
| if (id < 0 || id >= MAX_DIAG_BRIDGE_DEVS) { |
| pr_err("Invalid device ID"); |
| return -ENODEV; |
| } |
| |
| dev = __dev[id]; |
| if (!dev) { |
| pr_err("dev is null"); |
| return -ENODEV; |
| } |
| |
| if (dev->ops) { |
| pr_err("bridge already opened"); |
| return -EALREADY; |
| } |
| |
| dev->ops = ops; |
| dev->err = 0; |
| |
| #ifdef CONFIG_PM_RUNTIME |
| dev->default_autosusp_delay = dev->udev->dev.power.autosuspend_delay; |
| #endif |
| pm_runtime_set_autosuspend_delay(&dev->udev->dev, |
| AUTOSUSP_DELAY_WITH_USB); |
| |
| kref_get(&dev->kref); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(diag_bridge_open); |
| |
| static void diag_bridge_delete(struct kref *kref) |
| { |
| struct diag_bridge *dev = container_of(kref, struct diag_bridge, kref); |
| int id = dev->id; |
| |
| usb_put_dev(dev->udev); |
| __dev[id] = 0; |
| kfree(dev); |
| } |
| |
| void diag_bridge_close(int id) |
| { |
| struct diag_bridge *dev; |
| |
| if (id < 0 || id >= MAX_DIAG_BRIDGE_DEVS) { |
| pr_err("Invalid device ID"); |
| return; |
| } |
| |
| dev = __dev[id]; |
| if (!dev) { |
| pr_err("dev is null"); |
| return; |
| } |
| |
| if (!dev->ops) { |
| pr_err("can't close bridge that was not open"); |
| return; |
| } |
| |
| dev_dbg(&dev->ifc->dev, "%s:\n", __func__); |
| |
| usb_kill_anchored_urbs(&dev->submitted); |
| dev->ops = 0; |
| |
| pm_runtime_set_autosuspend_delay(&dev->udev->dev, |
| dev->default_autosusp_delay); |
| |
| kref_put(&dev->kref, diag_bridge_delete); |
| } |
| EXPORT_SYMBOL(diag_bridge_close); |
| |
| static void diag_bridge_read_cb(struct urb *urb) |
| { |
| struct diag_bridge *dev = urb->context; |
| struct diag_bridge_ops *cbs = dev->ops; |
| |
| dev_dbg(&dev->ifc->dev, "%s: status:%d actual:%d\n", __func__, |
| urb->status, urb->actual_length); |
| |
| /* save error so that subsequent read/write returns ENODEV */ |
| if (urb->status == -EPROTO) |
| dev->err = urb->status; |
| |
| if (cbs && cbs->read_complete_cb) |
| cbs->read_complete_cb(cbs->ctxt, |
| urb->transfer_buffer, |
| urb->transfer_buffer_length, |
| urb->status < 0 ? urb->status : urb->actual_length); |
| |
| dev->bytes_to_host += urb->actual_length; |
| dev->pending_reads--; |
| kref_put(&dev->kref, diag_bridge_delete); |
| } |
| |
| int diag_bridge_read(int id, char *data, int size) |
| { |
| struct urb *urb = NULL; |
| unsigned int pipe; |
| struct diag_bridge *dev; |
| int ret; |
| |
| if (id < 0 || id >= MAX_DIAG_BRIDGE_DEVS) { |
| pr_err("Invalid device ID"); |
| return -ENODEV; |
| } |
| |
| pr_debug("reading %d bytes", size); |
| |
| dev = __dev[id]; |
| if (!dev) { |
| pr_err("device is disconnected"); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&dev->ifc_mutex); |
| if (!dev->ifc) { |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| if (!dev->ops) { |
| pr_err("bridge is not open"); |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| if (!size) { |
| dev_err(&dev->ifc->dev, "invalid size:%d\n", size); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* if there was a previous unrecoverable error, just quit */ |
| if (dev->err) { |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| kref_get(&dev->kref); |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| dev_err(&dev->ifc->dev, "unable to allocate urb\n"); |
| ret = -ENOMEM; |
| goto put_error; |
| } |
| |
| ret = usb_autopm_get_interface(dev->ifc); |
| if (ret < 0 && ret != -EAGAIN && ret != -EACCES) { |
| pr_err_ratelimited("read: autopm_get failed:%d", ret); |
| goto free_error; |
| } |
| |
| pipe = usb_rcvbulkpipe(dev->udev, dev->in_epAddr); |
| usb_fill_bulk_urb(urb, dev->udev, pipe, data, size, |
| diag_bridge_read_cb, dev); |
| usb_anchor_urb(urb, &dev->submitted); |
| dev->pending_reads++; |
| |
| ret = usb_submit_urb(urb, GFP_KERNEL); |
| if (ret) { |
| pr_err_ratelimited("submitting urb failed err:%d", ret); |
| dev->pending_reads--; |
| usb_unanchor_urb(urb); |
| } |
| usb_autopm_put_interface(dev->ifc); |
| |
| free_error: |
| usb_free_urb(urb); |
| put_error: |
| if (ret) /* otherwise this is done in the completion handler */ |
| kref_put(&dev->kref, diag_bridge_delete); |
| error: |
| mutex_unlock(&dev->ifc_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(diag_bridge_read); |
| |
| static void diag_bridge_write_cb(struct urb *urb) |
| { |
| struct diag_bridge *dev = urb->context; |
| struct diag_bridge_ops *cbs = dev->ops; |
| |
| dev_dbg(&dev->ifc->dev, "%s:\n", __func__); |
| |
| usb_autopm_put_interface_async(dev->ifc); |
| |
| /* save error so that subsequent read/write returns ENODEV */ |
| if (urb->status == -EPROTO) |
| dev->err = urb->status; |
| |
| if (cbs && cbs->write_complete_cb) |
| cbs->write_complete_cb(cbs->ctxt, |
| urb->transfer_buffer, |
| urb->transfer_buffer_length, |
| urb->status < 0 ? urb->status : urb->actual_length); |
| |
| dev->bytes_to_mdm += urb->actual_length; |
| dev->pending_writes--; |
| kref_put(&dev->kref, diag_bridge_delete); |
| } |
| |
| int diag_bridge_write(int id, char *data, int size) |
| { |
| struct urb *urb = NULL; |
| unsigned int pipe; |
| struct diag_bridge *dev; |
| int ret; |
| |
| if (id < 0 || id >= MAX_DIAG_BRIDGE_DEVS) { |
| pr_err("Invalid device ID"); |
| return -ENODEV; |
| } |
| |
| pr_debug("writing %d bytes", size); |
| |
| dev = __dev[id]; |
| if (!dev) { |
| pr_err("device is disconnected"); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&dev->ifc_mutex); |
| if (!dev->ifc) { |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| if (!dev->ops) { |
| pr_err("bridge is not open"); |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| if (!size) { |
| dev_err(&dev->ifc->dev, "invalid size:%d\n", size); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* if there was a previous unrecoverable error, just quit */ |
| if (dev->err) { |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| kref_get(&dev->kref); |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| dev_err(&dev->ifc->dev, "unable to allocate urb\n"); |
| ret = -ENOMEM; |
| goto put_error; |
| } |
| |
| ret = usb_autopm_get_interface(dev->ifc); |
| if (ret < 0 && ret != -EAGAIN && ret != -EACCES) { |
| pr_err_ratelimited("write: autopm_get failed:%d", ret); |
| goto free_error; |
| } |
| |
| pipe = usb_sndbulkpipe(dev->udev, dev->out_epAddr); |
| usb_fill_bulk_urb(urb, dev->udev, pipe, data, size, |
| diag_bridge_write_cb, dev); |
| urb->transfer_flags |= URB_ZERO_PACKET; |
| usb_anchor_urb(urb, &dev->submitted); |
| dev->pending_writes++; |
| |
| ret = usb_submit_urb(urb, GFP_KERNEL); |
| if (ret) { |
| pr_err_ratelimited("submitting urb failed err:%d", ret); |
| dev->pending_writes--; |
| usb_unanchor_urb(urb); |
| usb_autopm_put_interface(dev->ifc); |
| goto free_error; |
| } |
| |
| free_error: |
| usb_free_urb(urb); |
| put_error: |
| if (ret) /* otherwise this is done in the completion handler */ |
| kref_put(&dev->kref, diag_bridge_delete); |
| error: |
| mutex_unlock(&dev->ifc_mutex); |
| return ret; |
| } |
| EXPORT_SYMBOL(diag_bridge_write); |
| |
| #if defined(CONFIG_DEBUG_FS) |
| #define DEBUG_BUF_SIZE 512 |
| static ssize_t diag_read_stats(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int i, ret = 0; |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| for (i = 0; i < MAX_DIAG_BRIDGE_DEVS; i++) { |
| struct diag_bridge *dev = __dev[i]; |
| if (!dev) |
| continue; |
| |
| ret += scnprintf(buf, DEBUG_BUF_SIZE, |
| "epin:%d, epout:%d\n" |
| "bytes to host: %lu\n" |
| "bytes to mdm: %lu\n" |
| "pending reads: %u\n" |
| "pending writes: %u\n" |
| "last error: %d\n", |
| dev->in_epAddr, dev->out_epAddr, |
| dev->bytes_to_host, dev->bytes_to_mdm, |
| dev->pending_reads, dev->pending_writes, |
| dev->err); |
| } |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, ret); |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_reset_stats(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_DIAG_BRIDGE_DEVS; i++) { |
| struct diag_bridge *dev = __dev[i]; |
| if (dev) { |
| dev->bytes_to_host = dev->bytes_to_mdm = 0; |
| dev->pending_reads = dev->pending_writes = 0; |
| } |
| } |
| |
| return count; |
| } |
| |
| const struct file_operations diag_stats_ops = { |
| .read = diag_read_stats, |
| .write = diag_reset_stats, |
| }; |
| |
| static struct dentry *dent; |
| |
| static void diag_bridge_debugfs_init(void) |
| { |
| struct dentry *dfile; |
| |
| dent = debugfs_create_dir("diag_bridge", 0); |
| if (IS_ERR(dent)) |
| return; |
| |
| dfile = debugfs_create_file("status", 0444, dent, 0, &diag_stats_ops); |
| if (!dfile || IS_ERR(dfile)) |
| debugfs_remove(dent); |
| } |
| |
| static void diag_bridge_debugfs_cleanup(void) |
| { |
| if (dent) { |
| debugfs_remove_recursive(dent); |
| dent = NULL; |
| } |
| } |
| #else |
| static inline void diag_bridge_debugfs_init(void) { } |
| static inline void diag_bridge_debugfs_cleanup(void) { } |
| #endif |
| |
| static int |
| diag_bridge_probe(struct usb_interface *ifc, const struct usb_device_id *id) |
| { |
| struct diag_bridge *dev; |
| struct usb_host_interface *ifc_desc; |
| struct usb_endpoint_descriptor *ep_desc; |
| int i, devid, ret = -ENOMEM; |
| __u8 ifc_num; |
| |
| pr_debug("id:%lu", id->driver_info); |
| |
| ifc_num = ifc->cur_altsetting->desc.bInterfaceNumber; |
| |
| /* is this interface supported ? */ |
| if (ifc_num != (id->driver_info & 0xFF)) |
| return -ENODEV; |
| |
| devid = (id->driver_info >> 8) & 0xFF; |
| if (devid < 0 || devid >= MAX_DIAG_BRIDGE_DEVS) |
| return -ENODEV; |
| |
| /* already probed? */ |
| if (__dev[devid]) { |
| pr_err("Diag device already probed"); |
| return -ENODEV; |
| } |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| pr_err("unable to allocate dev"); |
| return -ENOMEM; |
| } |
| |
| __dev[devid] = dev; |
| dev->id = devid; |
| |
| dev->udev = usb_get_dev(interface_to_usbdev(ifc)); |
| dev->ifc = ifc; |
| kref_init(&dev->kref); |
| mutex_init(&dev->ifc_mutex); |
| init_usb_anchor(&dev->submitted); |
| |
| ifc_desc = ifc->cur_altsetting; |
| for (i = 0; i < ifc_desc->desc.bNumEndpoints; i++) { |
| ep_desc = &ifc_desc->endpoint[i].desc; |
| |
| if (!dev->in_epAddr && usb_endpoint_is_bulk_in(ep_desc)) |
| dev->in_epAddr = ep_desc->bEndpointAddress; |
| |
| if (!dev->out_epAddr && usb_endpoint_is_bulk_out(ep_desc)) |
| dev->out_epAddr = ep_desc->bEndpointAddress; |
| } |
| |
| if (!(dev->in_epAddr && dev->out_epAddr)) { |
| pr_err("could not find bulk in and bulk out endpoints"); |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| usb_set_intfdata(ifc, dev); |
| diag_bridge_debugfs_init(); |
| dev->pdev = platform_device_register_simple("diag_bridge", devid, |
| NULL, 0); |
| if (IS_ERR(dev->pdev)) { |
| pr_err("unable to allocate platform device"); |
| ret = PTR_ERR(dev->pdev); |
| goto error; |
| } |
| |
| dev_dbg(&dev->ifc->dev, "%s: complete\n", __func__); |
| |
| return 0; |
| |
| error: |
| if (dev) |
| kref_put(&dev->kref, diag_bridge_delete); |
| |
| return ret; |
| } |
| |
| static void diag_bridge_disconnect(struct usb_interface *ifc) |
| { |
| struct diag_bridge *dev = usb_get_intfdata(ifc); |
| |
| dev_dbg(&dev->ifc->dev, "%s:\n", __func__); |
| |
| platform_device_unregister(dev->pdev); |
| mutex_lock(&dev->ifc_mutex); |
| dev->ifc = NULL; |
| mutex_unlock(&dev->ifc_mutex); |
| diag_bridge_debugfs_cleanup(); |
| kref_put(&dev->kref, diag_bridge_delete); |
| usb_set_intfdata(ifc, NULL); |
| } |
| |
| static int diag_bridge_suspend(struct usb_interface *ifc, pm_message_t message) |
| { |
| struct diag_bridge *dev = usb_get_intfdata(ifc); |
| struct diag_bridge_ops *cbs = dev->ops; |
| int ret = 0; |
| |
| if (cbs && cbs->suspend) { |
| ret = cbs->suspend(cbs->ctxt); |
| if (ret) { |
| dev_dbg(&dev->ifc->dev, |
| "%s: diag veto'd suspend\n", __func__); |
| return ret; |
| } |
| |
| usb_kill_anchored_urbs(&dev->submitted); |
| } |
| |
| return ret; |
| } |
| |
| static int diag_bridge_resume(struct usb_interface *ifc) |
| { |
| struct diag_bridge *dev = usb_get_intfdata(ifc); |
| struct diag_bridge_ops *cbs = dev->ops; |
| |
| |
| if (cbs && cbs->resume) |
| cbs->resume(cbs->ctxt); |
| |
| return 0; |
| } |
| |
| #define VALID_INTERFACE_NUM 0 |
| #define DEV_ID(n) ((n)<<8) |
| |
| static const struct usb_device_id diag_bridge_ids[] = { |
| { USB_DEVICE(0x5c6, 0x9001), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(0), }, |
| { USB_DEVICE(0x5c6, 0x9034), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(0), }, |
| { USB_DEVICE(0x5c6, 0x9048), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(0), }, |
| { USB_DEVICE(0x5c6, 0x904C), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(0), }, |
| { USB_DEVICE(0x5c6, 0x9075), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(0), }, |
| { USB_DEVICE(0x5c6, 0x9079), |
| .driver_info = VALID_INTERFACE_NUM | DEV_ID(1), }, |
| |
| {} /* terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, diag_bridge_ids); |
| |
| static struct usb_driver diag_bridge_driver = { |
| .name = "diag_bridge", |
| .probe = diag_bridge_probe, |
| .disconnect = diag_bridge_disconnect, |
| .suspend = diag_bridge_suspend, |
| .resume = diag_bridge_resume, |
| .id_table = diag_bridge_ids, |
| .supports_autosuspend = 1, |
| }; |
| |
| static int __init diag_bridge_init(void) |
| { |
| int ret; |
| |
| ret = usb_register(&diag_bridge_driver); |
| if (ret) { |
| pr_err("unable to register diag driver"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit diag_bridge_exit(void) |
| { |
| usb_deregister(&diag_bridge_driver); |
| } |
| |
| module_init(diag_bridge_init); |
| module_exit(diag_bridge_exit); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_VERSION(DRIVER_VERSION); |
| MODULE_LICENSE("GPL v2"); |