| /* |
| * sbpcd.h Specify interface address and interface type here. |
| */ |
| |
| /* |
| * Attention! This file contains user-serviceable parts! |
| * I recommend to make use of it... |
| * If you feel helpless, look into Documentation/cdrom/sbpcd |
| * (good idea anyway, at least before mailing me). |
| * |
| * The definitions for the first controller can get overridden by |
| * the kernel command line ("lilo boot option"). |
| * Examples: |
| * sbpcd=0x300,LaserMate |
| * or |
| * sbpcd=0x230,SoundBlaster |
| * or |
| * sbpcd=0x338,SoundScape |
| * or |
| * sbpcd=0x2C0,Teac16bit |
| * |
| * If sbpcd gets used as a module, you can load it with |
| * insmod sbpcd.o sbpcd=0x300,0 |
| * or |
| * insmod sbpcd.o sbpcd=0x230,1 |
| * or |
| * insmod sbpcd.o sbpcd=0x338,2 |
| * or |
| * insmod sbpcd.o sbpcd=0x2C0,3 |
| * respective to override the configured address and type. |
| */ |
| |
| /* |
| * define your CDROM port base address as CDROM_PORT |
| * and specify the type of your interface card as SBPRO. |
| * |
| * address: |
| * ======== |
| * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ... |
| * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ... |
| * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to |
| * specify the REAL address here, not the configuration port address. Look |
| * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let |
| * sbpcd auto-probe, if you are not firm with the address. |
| * There are some soundcards on the market with 0x0630, 0x0650, ...; their |
| * type is not obvious (both types are possible). |
| * |
| * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1. |
| * if your soundcard has its CDROM port above 0x300, specify |
| * that address and try SBPRO 0 first. |
| * if your SoundScape configuration port is at 0x330, specify |
| * 0x338 and SBPRO 2. |
| * |
| * interface type: |
| * =============== |
| * set SBPRO to 1 for "true" SoundBlaster card |
| * set SBPRO to 0 for "compatible" soundcards and |
| * for "poor" (no sound) interface cards. |
| * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards |
| * set SBPRO to 3 for Teac 16bit interface cards |
| * |
| * Almost all "compatible" sound boards need to set SBPRO to 0. |
| * If SBPRO is set wrong, the drives will get found - but any |
| * data access will give errors (audio access will work). |
| * The "OmniCD" no-sound interface card from CreativeLabs and most Teac |
| * interface cards need SBPRO 1. |
| * |
| * sound base: |
| * =========== |
| * The SOUND_BASE definition tells if we should try to turn the CD sound |
| * channels on. It will only be of use regarding soundcards with a SbPro |
| * compatible mixer. |
| * |
| * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels |
| * #define SOUND_BASE 0 leaves the soundcard untouched |
| */ |
| #define CDROM_PORT 0x340 /* <-----------<< port address */ |
| #define SBPRO 0 /* <-----------<< interface type */ |
| #define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ |
| #define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */ |
| |
| /* |
| * some more or less user dependent definitions - service them! |
| */ |
| |
| /* Set this to 0 once you have configured your interface definitions right. */ |
| #define DISTRIBUTION 1 |
| |
| /* |
| * Time to wait after giving a message. |
| * This gets important if you enable non-standard DBG_xxx flags. |
| * You will see what happens if you omit the pause or make it |
| * too short. Be warned! |
| */ |
| #define KLOGD_PAUSE 1 |
| |
| /* tray control: eject tray if no disk is in */ |
| #if DISTRIBUTION |
| #define JUKEBOX 0 |
| #else |
| #define JUKEBOX 1 |
| #endif /* DISTRIBUTION */ |
| |
| /* tray control: eject tray after last use */ |
| #if DISTRIBUTION |
| #define EJECT 0 |
| #else |
| #define EJECT 1 |
| #endif /* DISTRIBUTION */ |
| |
| /* max. number of audio frames to read with one */ |
| /* request (allocates n* 2352 bytes kernel memory!) */ |
| /* may be freely adjusted, f.e. 75 (= 1 sec.), at */ |
| /* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */ |
| #define READ_AUDIO 0 |
| |
| /* Optimizations for the Teac CD-55A drive read performance. |
| * SBP_TEAC_SPEED can be changed here, or one can set the |
| * variable "teac" when loading as a module. |
| * Valid settings are: |
| * 0 - very slow - the recommended "DISTRIBUTION 1" setup. |
| * 1 - 2x performance with little overhead. No busy waiting. |
| * 2 - 4x performance with 5ms overhead per read. Busy wait. |
| * |
| * Setting SBP_TEAC_SPEED or the variable 'teac' to anything |
| * other than 0 may cause problems. If you run into them, first |
| * change SBP_TEAC_SPEED back to 0 and see if your drive responds |
| * normally. If yes, you are "allowed" to report your case - to help |
| * me with the driver, not to solve your hassle. Don´t mail if you |
| * simply are stuck into your own "tuning" experiments, you know? |
| */ |
| #define SBP_TEAC_SPEED 1 |
| |
| /*==========================================================================*/ |
| /*==========================================================================*/ |
| /* |
| * nothing to change below here if you are not fully aware what you're doing |
| */ |
| #ifndef _LINUX_SBPCD_H |
| |
| #define _LINUX_SBPCD_H |
| /*==========================================================================*/ |
| /*==========================================================================*/ |
| /* |
| * driver's own read_ahead, data mode |
| */ |
| #define SBP_BUFFER_FRAMES 8 |
| |
| #define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */ |
| #undef FUTURE |
| #undef SAFE_MIXED |
| |
| #define TEST_UPC 0 |
| #define SPEA_TEST 0 |
| #define TEST_STI 0 |
| #define OLD_BUSY 0 |
| #undef PATH_CHECK |
| #ifndef SOUND_BASE |
| #define SOUND_BASE 0 |
| #endif |
| #if DISTRIBUTION |
| #undef SBP_TEAC_SPEED |
| #define SBP_TEAC_SPEED 0 |
| #endif |
| /*==========================================================================*/ |
| /* |
| * DDI interface definitions |
| * "invented" by Fred N. van Kempen.. |
| */ |
| #define DDIOCSDBG 0x9000 |
| |
| /*==========================================================================*/ |
| /* |
| * "private" IOCTL functions |
| */ |
| #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ |
| |
| /*==========================================================================*/ |
| /* |
| * Debug output levels |
| */ |
| #define DBG_INF 1 /* necessary information */ |
| #define DBG_BSZ 2 /* BLOCK_SIZE trace */ |
| #define DBG_REA 3 /* READ status trace */ |
| #define DBG_CHK 4 /* MEDIA CHECK trace */ |
| #define DBG_TIM 5 /* datarate timer test */ |
| #define DBG_INI 6 /* initialization trace */ |
| #define DBG_TOC 7 /* tell TocEntry values */ |
| #define DBG_IOC 8 /* ioctl trace */ |
| #define DBG_STA 9 /* ResponseStatus() trace */ |
| #define DBG_ERR 10 /* cc_ReadError() trace */ |
| #define DBG_CMD 11 /* cmd_out() trace */ |
| #define DBG_WRN 12 /* give explanation before auto-probing */ |
| #define DBG_MUL 13 /* multi session code test */ |
| #define DBG_IDX 14 /* test code for drive_id !=0 */ |
| #define DBG_IOX 15 /* some special information */ |
| #define DBG_DID 16 /* drive ID test */ |
| #define DBG_RES 17 /* drive reset info */ |
| #define DBG_SPI 18 /* SpinUp test */ |
| #define DBG_IOS 19 /* ioctl trace: subchannel functions */ |
| #define DBG_IO2 20 /* ioctl trace: general */ |
| #define DBG_UPC 21 /* show UPC information */ |
| #define DBG_XA1 22 /* XA mode debugging */ |
| #define DBG_LCK 23 /* door (un)lock info */ |
| #define DBG_SQ1 24 /* dump SubQ frame */ |
| #define DBG_AUD 25 /* READ AUDIO debugging */ |
| #define DBG_SEQ 26 /* Sequoia interface configuration trace */ |
| #define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */ |
| #define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */ |
| #define DBG_TEA 29 /* TEAC CD-55A debugging trace */ |
| #define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */ |
| #define DBG_000 31 /* unnecessary information */ |
| |
| /*==========================================================================*/ |
| /*==========================================================================*/ |
| |
| /* |
| * bits of flags_cmd_out: |
| */ |
| #define f_respo3 0x100 |
| #define f_putcmd 0x80 |
| #define f_respo2 0x40 |
| #define f_lopsta 0x20 |
| #define f_getsta 0x10 |
| #define f_ResponseStatus 0x08 |
| #define f_obey_p_check 0x04 |
| #define f_bit1 0x02 |
| #define f_wait_if_busy 0x01 |
| |
| /* |
| * diskstate_flags: |
| */ |
| #define x80_bit 0x80 |
| #define upc_bit 0x40 |
| #define volume_bit 0x20 |
| #define toc_bit 0x10 |
| #define multisession_bit 0x08 |
| #define cd_size_bit 0x04 |
| #define subq_bit 0x02 |
| #define frame_size_bit 0x01 |
| |
| /* |
| * disk states (bits of diskstate_flags): |
| */ |
| #define upc_valid (current_drive->diskstate_flags&upc_bit) |
| #define volume_valid (current_drive->diskstate_flags&volume_bit) |
| #define toc_valid (current_drive->diskstate_flags&toc_bit) |
| #define cd_size_valid (current_drive->diskstate_flags&cd_size_bit) |
| #define subq_valid (current_drive->diskstate_flags&subq_bit) |
| #define frame_size_valid (current_drive->diskstate_flags&frame_size_bit) |
| |
| /* |
| * the status_bits variable |
| */ |
| #define p_success 0x100 |
| #define p_door_closed 0x80 |
| #define p_caddy_in 0x40 |
| #define p_spinning 0x20 |
| #define p_check 0x10 |
| #define p_busy_new 0x08 |
| #define p_door_locked 0x04 |
| #define p_disk_ok 0x01 |
| |
| /* |
| * LCS-7260 special status result bits: |
| */ |
| #define p_lcs_door_locked 0x02 |
| #define p_lcs_door_closed 0x01 /* probably disk_in */ |
| |
| /* |
| * CR-52x special status result bits: |
| */ |
| #define p_caddin_old 0x40 |
| #define p_success_old 0x08 |
| #define p_busy_old 0x04 |
| #define p_bit_1 0x02 /* hopefully unused now */ |
| |
| /* |
| * "generation specific" defs of the status result bits: |
| */ |
| #define p0_door_closed 0x80 |
| #define p0_caddy_in 0x40 |
| #define p0_spinning 0x20 |
| #define p0_check 0x10 |
| #define p0_success 0x08 /* unused */ |
| #define p0_busy 0x04 |
| #define p0_bit_1 0x02 /* unused */ |
| #define p0_disk_ok 0x01 |
| |
| #define pL_disk_in 0x40 |
| #define pL_spinning 0x20 |
| #define pL_check 0x10 |
| #define pL_success 0x08 /* unused ?? */ |
| #define pL_busy 0x04 |
| #define pL_door_locked 0x02 |
| #define pL_door_closed 0x01 |
| |
| #define pV_door_closed 0x40 |
| #define pV_spinning 0x20 |
| #define pV_check 0x10 |
| #define pV_success 0x08 |
| #define pV_busy 0x04 |
| #define pV_door_locked 0x02 |
| #define pV_disk_ok 0x01 |
| |
| #define p1_door_closed 0x80 |
| #define p1_disk_in 0x40 |
| #define p1_spinning 0x20 |
| #define p1_check 0x10 |
| #define p1_busy 0x08 |
| #define p1_door_locked 0x04 |
| #define p1_bit_1 0x02 /* unused */ |
| #define p1_disk_ok 0x01 |
| |
| #define p2_disk_ok 0x80 |
| #define p2_door_locked 0x40 |
| #define p2_spinning 0x20 |
| #define p2_busy2 0x10 |
| #define p2_busy1 0x08 |
| #define p2_door_closed 0x04 |
| #define p2_disk_in 0x02 |
| #define p2_check 0x01 |
| |
| /* |
| * used drive states: |
| */ |
| #define st_door_closed (current_drive->status_bits&p_door_closed) |
| #define st_caddy_in (current_drive->status_bits&p_caddy_in) |
| #define st_spinning (current_drive->status_bits&p_spinning) |
| #define st_check (current_drive->status_bits&p_check) |
| #define st_busy (current_drive->status_bits&p_busy_new) |
| #define st_door_locked (current_drive->status_bits&p_door_locked) |
| #define st_diskok (current_drive->status_bits&p_disk_ok) |
| |
| /* |
| * bits of the CDi_status register: |
| */ |
| #define s_not_result_ready 0x04 /* 0: "result ready" */ |
| #define s_not_data_ready 0x02 /* 0: "data ready" */ |
| #define s_attention 0x01 /* 1: "attention required" */ |
| /* |
| * usable as: |
| */ |
| #define DRV_ATTN ((inb(CDi_status)&s_attention)!=0) |
| #define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0) |
| #define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0) |
| |
| /* |
| * drive families and types (firmware versions): |
| */ |
| #define drv_fam0 0x0100 /* CR-52x family */ |
| #define drv_199 (drv_fam0+0x01) /* <200 */ |
| #define drv_200 (drv_fam0+0x02) /* <201 */ |
| #define drv_201 (drv_fam0+0x03) /* <210 */ |
| #define drv_210 (drv_fam0+0x04) /* <211 */ |
| #define drv_211 (drv_fam0+0x05) /* <300 */ |
| #define drv_300 (drv_fam0+0x06) /* >=300 */ |
| |
| #define drv_fam1 0x0200 /* CR-56x family */ |
| #define drv_099 (drv_fam1+0x01) /* <100 */ |
| #define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */ |
| |
| #define drv_fam2 0x0400 /* CD200 family */ |
| |
| #define drv_famT 0x0800 /* TEAC CD-55A */ |
| |
| #define drv_famL 0x1000 /* Longshine family */ |
| #define drv_260 (drv_famL+0x01) /* LCS-7260 */ |
| #define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */ |
| #define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */ |
| |
| #define drv_famV 0x2000 /* ECS-AT (vertos-100) family */ |
| #define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */ |
| |
| #define fam0_drive (current_drive->drv_type&drv_fam0) |
| #define famL_drive (current_drive->drv_type&drv_famL) |
| #define famV_drive (current_drive->drv_type&drv_famV) |
| #define fam1_drive (current_drive->drv_type&drv_fam1) |
| #define fam2_drive (current_drive->drv_type&drv_fam2) |
| #define famT_drive (current_drive->drv_type&drv_famT) |
| #define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL)) |
| #define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV)) |
| #define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV)) |
| #define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV)) |
| #define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL)) |
| #define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV)) |
| #define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV)) |
| #define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1)) |
| #define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2)) |
| #define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT)) |
| |
| /* |
| * audio states: |
| */ |
| #define audio_completed 3 /* Forgot this one! --AJK */ |
| #define audio_playing 2 |
| #define audio_pausing 1 |
| |
| /* |
| * drv_pattern, drv_options: |
| */ |
| #define speed_auto 0x80 |
| #define speed_300 0x40 |
| #define speed_150 0x20 |
| #define audio_mono 0x04 |
| |
| /* |
| * values of cmd_type (0 else): |
| */ |
| #define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */ |
| #define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */ |
| #define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */ |
| #define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */ |
| |
| /* |
| * sense_byte: |
| * |
| * values: 00 |
| * 01 |
| * 81 |
| * 82 "raw audio" mode |
| * xx from infobuf[0] after 85 00 00 00 00 00 00 |
| */ |
| |
| /* audio status (bin) */ |
| #define aud_00 0x00 /* Audio status byte not supported or not valid */ |
| #define audx11 0x0b /* Audio play operation in progress */ |
| #define audx12 0x0c /* Audio play operation paused */ |
| #define audx13 0x0d /* Audio play operation successfully completed */ |
| #define audx14 0x0e /* Audio play operation stopped due to error */ |
| #define audx15 0x0f /* No current audio status to return */ |
| /* audio status (bcd) */ |
| #define aud_11 0x11 /* Audio play operation in progress */ |
| #define aud_12 0x12 /* Audio play operation paused */ |
| #define aud_13 0x13 /* Audio play operation successfully completed */ |
| #define aud_14 0x14 /* Audio play operation stopped due to error */ |
| #define aud_15 0x15 /* No current audio status to return */ |
| |
| /* |
| * highest allowed drive number (MINOR+1) |
| */ |
| #define NR_SBPCD 4 |
| |
| /* |
| * we try to never disable interrupts - seems to work |
| */ |
| #define SBPCD_DIS_IRQ 0 |
| |
| /* |
| * "write byte to port" |
| */ |
| #define OUT(x,y) outb(y,x) |
| |
| /*==========================================================================*/ |
| |
| #define MIXER_addr SOUND_BASE+4 /* sound card's address register */ |
| #define MIXER_data SOUND_BASE+5 /* sound card's data register */ |
| #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */ |
| |
| /*==========================================================================*/ |
| |
| #define MAX_TRACKS 99 |
| |
| #define ERR_DISKCHANGE 615 |
| |
| /*==========================================================================*/ |
| /* |
| * To make conversions easier (machine dependent!) |
| */ |
| typedef union _msf |
| { |
| u_int n; |
| u_char c[4]; |
| } MSF; |
| |
| typedef union _blk |
| { |
| u_int n; |
| u_char c[4]; |
| } BLK; |
| |
| /*==========================================================================*/ |
| |
| /*============================================================================ |
| ============================================================================== |
| |
| COMMAND SET of "old" drives like CR-521, CR-522 |
| (the CR-562 family is different): |
| |
| No. Command Code |
| -------------------------------------------- |
| |
| Drive Commands: |
| 1 Seek 01 |
| 2 Read Data 02 |
| 3 Read XA-Data 03 |
| 4 Read Header 04 |
| 5 Spin Up 05 |
| 6 Spin Down 06 |
| 7 Diagnostic 07 |
| 8 Read UPC 08 |
| 9 Read ISRC 09 |
| 10 Play Audio 0A |
| 11 Play Audio MSF 0B |
| 12 Play Audio Track/Index 0C |
| |
| Status Commands: |
| 13 Read Status 81 |
| 14 Read Error 82 |
| 15 Read Drive Version 83 |
| 16 Mode Select 84 |
| 17 Mode Sense 85 |
| 18 Set XA Parameter 86 |
| 19 Read XA Parameter 87 |
| 20 Read Capacity 88 |
| 21 Read SUB_Q 89 |
| 22 Read Disc Code 8A |
| 23 Read Disc Information 8B |
| 24 Read TOC 8C |
| 25 Pause/Resume 8D |
| 26 Read Packet 8E |
| 27 Read Path Check 00 |
| |
| |
| all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first |
| |
| mnemo 7-byte command #bytes response (r0...rn) |
| ________ ____________________ ____ |
| |
| Read Status: |
| status: 81. (1) one-byte command, gives the main |
| status byte |
| Read Error: |
| check1: 82 00 00 00 00 00 00. (6) r1: audio status |
| |
| Read Packet: |
| check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating |
| to commands 01 04 05 07 08 09 |
| |
| Play Audio: |
| play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba), |
| nn-nn-nn: #blocks |
| Play Audio MSF: |
| 0b mm-ss-ff mm-ss-ff (0) play audio from/to |
| |
| Play Audio Track/Index: |
| 0c ... |
| |
| Pause/Resume: |
| pause: 8d pr 00 00 00 00 00. (0) pause (pr=00) |
| resume (pr=80) audio playing |
| |
| Mode Select: |
| 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340 |
| possibly defines transfer size |
| |
| set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1) |
| le(vel): min=0, max=FF, else half |
| (firmware 2.11) |
| |
| Mode Sense: |
| get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting |
| |
| Read Disc Information: |
| tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format) |
| |
| Read TOC: |
| tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn |
| (fl=0:"lba"-, =2:"msf-bin"-format) |
| |
| Read Capacity: |
| capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity" |
| |
| |
| Read Path Check: |
| ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55 |
| ("ping" if the drive is connected) |
| |
| Read Drive Version: |
| ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn" |
| (n.nn = 2.01, 2.11., 3.00, ...) |
| |
| Seek: |
| seek: 01 00 ll-bb-aa 00 00. (0) |
| seek: 01 02 mm-ss-ff 00 00. (0) |
| |
| Read Data: |
| read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes, |
| starting at block xx-xx-xx |
| fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx |
| |
| Read XA-Data: |
| read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes, |
| starting at block xx-xx-xx |
| fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx |
| |
| Read SUB_Q: |
| 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf, |
| fl=0: "lba", fl=2: "msf" |
| |
| Read Disc Code: |
| 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info |
| |
| Read Header: |
| 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2" |
| 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2" |
| |
| Spin Up: |
| 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek" |
| |
| Spin Down: |
| 06 ... |
| |
| Diagnostic: |
| 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2" |
| 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2" |
| |
| Read UPC: |
| 08 00 ll-bb-aa 00 00. (16) |
| 08 02 mm-ss-ff 00 00. (16) |
| |
| Read ISRC: |
| 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2" |
| 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2" |
| |
| Set XA Parameter: |
| 86 ... |
| |
| Read XA Parameter: |
| 87 ... |
| |
| ============================================================================== |
| ============================================================================*/ |
| |
| /* |
| * commands |
| * |
| * CR-52x: CMD0_ |
| * CR-56x: CMD1_ |
| * CD200: CMD2_ |
| * LCS-7260: CMDL_ |
| * TEAC CD-55A: CMDT_ |
| * ECS-AT: CMDV_ |
| */ |
| #define CMD1_RESET 0x0a |
| #define CMD2_RESET 0x01 |
| #define CMDT_RESET 0xc0 |
| |
| #define CMD1_LOCK_CTL 0x0c |
| #define CMD2_LOCK_CTL 0x1e |
| #define CMDT_LOCK_CTL CMD2_LOCK_CTL |
| #define CMDL_LOCK_CTL 0x0e |
| #define CMDV_LOCK_CTL CMDL_LOCK_CTL |
| |
| #define CMD1_TRAY_CTL 0x07 |
| #define CMD2_TRAY_CTL 0x1b |
| #define CMDT_TRAY_CTL CMD2_TRAY_CTL |
| #define CMDL_TRAY_CTL 0x0d |
| #define CMDV_TRAY_CTL CMDL_TRAY_CTL |
| |
| #define CMD1_MULTISESS 0x8d |
| #define CMDL_MULTISESS 0x8c |
| #define CMDV_MULTISESS CMDL_MULTISESS |
| |
| #define CMD1_SUBCHANINF 0x11 |
| #define CMD2_SUBCHANINF 0x?? |
| |
| #define CMD1_ABORT 0x08 |
| #define CMD2_ABORT 0x08 |
| #define CMDT_ABORT 0x08 |
| |
| #define CMD2_x02 0x02 |
| |
| #define CMD2_SETSPEED 0xda |
| |
| #define CMD0_PATH_CHECK 0x00 |
| #define CMD1_PATH_CHECK 0x??? |
| #define CMD2_PATH_CHECK 0x??? |
| #define CMDT_PATH_CHECK 0x??? |
| #define CMDL_PATH_CHECK CMD0_PATH_CHECK |
| #define CMDV_PATH_CHECK CMD0_PATH_CHECK |
| |
| #define CMD0_SEEK 0x01 |
| #define CMD1_SEEK CMD0_SEEK |
| #define CMD2_SEEK 0x2b |
| #define CMDT_SEEK CMD2_SEEK |
| #define CMDL_SEEK CMD0_SEEK |
| #define CMDV_SEEK CMD0_SEEK |
| |
| #define CMD0_READ 0x02 |
| #define CMD1_READ 0x10 |
| #define CMD2_READ 0x28 |
| #define CMDT_READ CMD2_READ |
| #define CMDL_READ CMD0_READ |
| #define CMDV_READ CMD0_READ |
| |
| #define CMD0_READ_XA 0x03 |
| #define CMD2_READ_XA 0xd4 |
| #define CMD2_READ_XA2 0xd5 |
| #define CMDL_READ_XA CMD0_READ_XA /* really ?? */ |
| #define CMDV_READ_XA CMD0_READ_XA |
| |
| #define CMD0_READ_HEAD 0x04 |
| |
| #define CMD0_SPINUP 0x05 |
| #define CMD1_SPINUP 0x02 |
| #define CMD2_SPINUP CMD2_TRAY_CTL |
| #define CMDL_SPINUP CMD0_SPINUP |
| #define CMDV_SPINUP CMD0_SPINUP |
| |
| #define CMD0_SPINDOWN 0x06 /* really??? */ |
| #define CMD1_SPINDOWN 0x06 |
| #define CMD2_SPINDOWN CMD2_TRAY_CTL |
| #define CMDL_SPINDOWN 0x0d |
| #define CMDV_SPINDOWN CMD0_SPINDOWN |
| |
| #define CMD0_DIAG 0x07 |
| |
| #define CMD0_READ_UPC 0x08 |
| #define CMD1_READ_UPC 0x88 |
| #define CMD2_READ_UPC 0x??? |
| #define CMDL_READ_UPC CMD0_READ_UPC |
| #define CMDV_READ_UPC 0x8f |
| |
| #define CMD0_READ_ISRC 0x09 |
| |
| #define CMD0_PLAY 0x0a |
| #define CMD1_PLAY 0x??? |
| #define CMD2_PLAY 0x??? |
| #define CMDL_PLAY CMD0_PLAY |
| #define CMDV_PLAY CMD0_PLAY |
| |
| #define CMD0_PLAY_MSF 0x0b |
| #define CMD1_PLAY_MSF 0x0e |
| #define CMD2_PLAY_MSF 0x47 |
| #define CMDT_PLAY_MSF CMD2_PLAY_MSF |
| #define CMDL_PLAY_MSF 0x??? |
| |
| #define CMD0_PLAY_TI 0x0c |
| #define CMD1_PLAY_TI 0x0f |
| |
| #define CMD0_STATUS 0x81 |
| #define CMD1_STATUS 0x05 |
| #define CMD2_STATUS 0x00 |
| #define CMDT_STATUS CMD2_STATUS |
| #define CMDL_STATUS CMD0_STATUS |
| #define CMDV_STATUS CMD0_STATUS |
| #define CMD2_SEEK_LEADIN 0x00 |
| |
| #define CMD0_READ_ERR 0x82 |
| #define CMD1_READ_ERR CMD0_READ_ERR |
| #define CMD2_READ_ERR 0x03 |
| #define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */ |
| #define CMDL_READ_ERR CMD0_READ_ERR |
| #define CMDV_READ_ERR CMD0_READ_ERR |
| |
| #define CMD0_READ_VER 0x83 |
| #define CMD1_READ_VER CMD0_READ_VER |
| #define CMD2_READ_VER 0x12 |
| #define CMDT_READ_VER CMD2_READ_VER /* really ?? */ |
| #define CMDL_READ_VER CMD0_READ_VER |
| #define CMDV_READ_VER CMD0_READ_VER |
| |
| #define CMD0_SETMODE 0x84 |
| #define CMD1_SETMODE 0x09 |
| #define CMD2_SETMODE 0x55 |
| #define CMDT_SETMODE CMD2_SETMODE |
| #define CMDL_SETMODE CMD0_SETMODE |
| |
| #define CMD0_GETMODE 0x85 |
| #define CMD1_GETMODE 0x84 |
| #define CMD2_GETMODE 0x5a |
| #define CMDT_GETMODE CMD2_GETMODE |
| #define CMDL_GETMODE CMD0_GETMODE |
| |
| #define CMD0_SET_XA 0x86 |
| |
| #define CMD0_GET_XA 0x87 |
| |
| #define CMD0_CAPACITY 0x88 |
| #define CMD1_CAPACITY 0x85 |
| #define CMD2_CAPACITY 0x25 |
| #define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */ |
| |
| #define CMD0_READSUBQ 0x89 |
| #define CMD1_READSUBQ 0x87 |
| #define CMD2_READSUBQ 0x42 |
| #define CMDT_READSUBQ CMD2_READSUBQ |
| #define CMDL_READSUBQ CMD0_READSUBQ |
| #define CMDV_READSUBQ CMD0_READSUBQ |
| |
| #define CMD0_DISKCODE 0x8a |
| |
| #define CMD0_DISKINFO 0x8b |
| #define CMD1_DISKINFO CMD0_DISKINFO |
| #define CMD2_DISKINFO 0x43 |
| #define CMDT_DISKINFO CMD2_DISKINFO |
| #define CMDL_DISKINFO CMD0_DISKINFO |
| #define CMDV_DISKINFO CMD0_DISKINFO |
| |
| #define CMD0_READTOC 0x8c |
| #define CMD1_READTOC CMD0_READTOC |
| #define CMD2_READTOC 0x??? |
| #define CMDL_READTOC CMD0_READTOC |
| #define CMDV_READTOC CMD0_READTOC |
| |
| #define CMD0_PAU_RES 0x8d |
| #define CMD1_PAU_RES 0x0d |
| #define CMD2_PAU_RES 0x4b |
| #define CMDT_PAUSE CMD2_PAU_RES |
| #define CMDL_PAU_RES CMD0_PAU_RES |
| #define CMDV_PAUSE CMD0_PAU_RES |
| |
| #define CMD0_PACKET 0x8e |
| #define CMD1_PACKET CMD0_PACKET |
| #define CMD2_PACKET 0x??? |
| #define CMDL_PACKET CMD0_PACKET |
| #define CMDV_PACKET 0x??? |
| |
| /*==========================================================================*/ |
| /*==========================================================================*/ |
| #endif /* _LINUX_SBPCD_H */ |
| /*==========================================================================*/ |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * Emacs will notice this stuff at the end of the file and automatically |
| * adjust the settings for this buffer only. This must remain at the end |
| * of the file. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-indent-level: 8 |
| * c-brace-imaginary-offset: 0 |
| * c-brace-offset: -8 |
| * c-argdecl-indent: 8 |
| * c-label-offset: -8 |
| * c-continued-statement-offset: 8 |
| * c-continued-brace-offset: 0 |
| * End: |
| */ |