blob: 1dbf13270cda9a5bf991067575e6940431d1b984 [file] [log] [blame]
/*
Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2800pci
Abstract: Data structures and registers for the rt2800pci module.
Supported chipsets: RT2800E & RT2800ED.
*/
#ifndef RT2800PCI_H
#define RT2800PCI_H
/*
* PCI registers.
*/
/*
* E2PROM_CSR: EEPROM control register.
* RELOAD: Write 1 to reload eeprom content.
* TYPE: 0: 93c46, 1:93c66.
* LOAD_STATUS: 1:loading, 0:done.
*/
#define E2PROM_CSR 0x0004
#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001)
#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002)
#define E2PROM_CSR_DATA_IN FIELD32(0x00000004)
#define E2PROM_CSR_DATA_OUT FIELD32(0x00000008)
#define E2PROM_CSR_TYPE FIELD32(0x00000030)
#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
#define E2PROM_CSR_RELOAD FIELD32(0x00000080)
/*
* Queue register offset macros
*/
#define TX_QUEUE_REG_OFFSET 0x10
#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
/*
* EFUSE_CSR: RT3090 EEPROM
*/
#define EFUSE_CTRL 0x0580
#define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000)
#define EFUSE_CTRL_MODE FIELD32(0x000000c0)
#define EFUSE_CTRL_KICK FIELD32(0x40000000)
/*
* EFUSE_DATA0
*/
#define EFUSE_DATA0 0x0590
/*
* EFUSE_DATA1
*/
#define EFUSE_DATA1 0x0594
/*
* EFUSE_DATA2
*/
#define EFUSE_DATA2 0x0598
/*
* EFUSE_DATA3
*/
#define EFUSE_DATA3 0x059c
/*
* 8051 firmware image.
*/
#define FIRMWARE_RT2860 "rt2860.bin"
#define FIRMWARE_IMAGE_BASE 0x2000
/*
* DMA descriptor defines.
*/
#define TXD_DESC_SIZE ( 4 * sizeof(__le32) )
#define RXD_DESC_SIZE ( 4 * sizeof(__le32) )
/*
* TX descriptor format for TX, PRIO and Beacon Ring.
*/
/*
* Word0
*/
#define TXD_W0_SD_PTR0 FIELD32(0xffffffff)
/*
* Word1
*/
#define TXD_W1_SD_LEN1 FIELD32(0x00003fff)
#define TXD_W1_LAST_SEC1 FIELD32(0x00004000)
#define TXD_W1_BURST FIELD32(0x00008000)
#define TXD_W1_SD_LEN0 FIELD32(0x3fff0000)
#define TXD_W1_LAST_SEC0 FIELD32(0x40000000)
#define TXD_W1_DMA_DONE FIELD32(0x80000000)
/*
* Word2
*/
#define TXD_W2_SD_PTR1 FIELD32(0xffffffff)
/*
* Word3
* WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
* QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
* 0:MGMT, 1:HCCA 2:EDCA
*/
#define TXD_W3_WIV FIELD32(0x01000000)
#define TXD_W3_QSEL FIELD32(0x06000000)
#define TXD_W3_TCO FIELD32(0x20000000)
#define TXD_W3_UCO FIELD32(0x40000000)
#define TXD_W3_ICO FIELD32(0x80000000)
/*
* RX descriptor format for RX Ring.
*/
/*
* Word0
*/
#define RXD_W0_SDP0 FIELD32(0xffffffff)
/*
* Word1
*/
#define RXD_W1_SDL1 FIELD32(0x00003fff)
#define RXD_W1_SDL0 FIELD32(0x3fff0000)
#define RXD_W1_LS0 FIELD32(0x40000000)
#define RXD_W1_DMA_DONE FIELD32(0x80000000)
/*
* Word2
*/
#define RXD_W2_SDP1 FIELD32(0xffffffff)
/*
* Word3
* AMSDU: RX with 802.3 header, not 802.11 header.
* DECRYPTED: This frame is being decrypted.
*/
#define RXD_W3_BA FIELD32(0x00000001)
#define RXD_W3_DATA FIELD32(0x00000002)
#define RXD_W3_NULLDATA FIELD32(0x00000004)
#define RXD_W3_FRAG FIELD32(0x00000008)
#define RXD_W3_UNICAST_TO_ME FIELD32(0x00000010)
#define RXD_W3_MULTICAST FIELD32(0x00000020)
#define RXD_W3_BROADCAST FIELD32(0x00000040)
#define RXD_W3_MY_BSS FIELD32(0x00000080)
#define RXD_W3_CRC_ERROR FIELD32(0x00000100)
#define RXD_W3_CIPHER_ERROR FIELD32(0x00000600)
#define RXD_W3_AMSDU FIELD32(0x00000800)
#define RXD_W3_HTC FIELD32(0x00001000)
#define RXD_W3_RSSI FIELD32(0x00002000)
#define RXD_W3_L2PAD FIELD32(0x00004000)
#define RXD_W3_AMPDU FIELD32(0x00008000)
#define RXD_W3_DECRYPTED FIELD32(0x00010000)
#define RXD_W3_PLCP_SIGNAL FIELD32(0x00020000)
#define RXD_W3_PLCP_RSSI FIELD32(0x00040000)
#endif /* RT2800PCI_H */