| /* |
| * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. |
| * |
| * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * Author: Hema HK <hemahk@ti.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/usb/otg.h> |
| #include <linux/i2c/twl.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/err.h> |
| #include <linux/notifier.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| |
| /* usb register definitions */ |
| #define USB_VENDOR_ID_LSB 0x00 |
| #define USB_VENDOR_ID_MSB 0x01 |
| #define USB_PRODUCT_ID_LSB 0x02 |
| #define USB_PRODUCT_ID_MSB 0x03 |
| #define USB_VBUS_CTRL_SET 0x04 |
| #define USB_VBUS_CTRL_CLR 0x05 |
| #define USB_ID_CTRL_SET 0x06 |
| #define USB_ID_CTRL_CLR 0x07 |
| #define USB_VBUS_INT_SRC 0x08 |
| #define USB_VBUS_INT_LATCH_SET 0x09 |
| #define USB_VBUS_INT_LATCH_CLR 0x0A |
| #define USB_VBUS_INT_EN_LO_SET 0x0B |
| #define USB_VBUS_INT_EN_LO_CLR 0x0C |
| #define USB_VBUS_INT_EN_HI_SET 0x0D |
| #define USB_VBUS_INT_EN_HI_CLR 0x0E |
| #define USB_ID_INT_SRC 0x0F |
| #define USB_ID_INT_LATCH_SET 0x10 |
| #define USB_ID_INT_LATCH_CLR 0x11 |
| |
| #define USB_ID_INT_EN_LO_SET 0x12 |
| #define USB_ID_INT_EN_LO_CLR 0x13 |
| #define USB_ID_INT_EN_HI_SET 0x14 |
| #define USB_ID_INT_EN_HI_CLR 0x15 |
| #define USB_OTG_ADP_CTRL 0x16 |
| #define USB_OTG_ADP_HIGH 0x17 |
| #define USB_OTG_ADP_LOW 0x18 |
| #define USB_OTG_ADP_RISE 0x19 |
| #define USB_OTG_REVISION 0x1A |
| |
| /* to be moved to LDO */ |
| #define TWL6030_MISC2 0xE5 |
| #define TWL6030_CFG_LDO_PD2 0xF5 |
| #define TWL6030_BACKUP_REG 0xFA |
| |
| #define STS_HW_CONDITIONS 0x21 |
| |
| /* In module TWL6030_MODULE_PM_MASTER */ |
| #define STS_HW_CONDITIONS 0x21 |
| #define STS_USB_ID BIT(2) |
| |
| /* In module TWL6030_MODULE_PM_RECEIVER */ |
| #define VUSB_CFG_TRANS 0x71 |
| #define VUSB_CFG_STATE 0x72 |
| #define VUSB_CFG_VOLTAGE 0x73 |
| |
| /* in module TWL6030_MODULE_MAIN_CHARGE */ |
| |
| #define CHARGERUSB_CTRL1 0x8 |
| |
| #define CONTROLLER_STAT1 0x03 |
| #define VBUS_DET BIT(2) |
| |
| struct twl6030_usb { |
| struct otg_transceiver otg; |
| struct device *dev; |
| |
| /* for vbus reporting with irqs disabled */ |
| spinlock_t lock; |
| |
| struct regulator *usb3v3; |
| |
| int irq1; |
| int irq2; |
| u8 linkstat; |
| u8 asleep; |
| bool irq_enabled; |
| unsigned long features; |
| }; |
| |
| #define xceiv_to_twl(x) container_of((x), struct twl6030_usb, otg) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, |
| u8 data, u8 address) |
| { |
| int ret = 0; |
| |
| ret = twl_i2c_write_u8(module, data, address); |
| if (ret < 0) |
| dev_err(twl->dev, |
| "Write[0x%x] Error %d\n", address, ret); |
| return ret; |
| } |
| |
| static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) |
| { |
| u8 data, ret = 0; |
| |
| ret = twl_i2c_read_u8(module, &data, address); |
| if (ret >= 0) |
| ret = data; |
| else |
| dev_err(twl->dev, |
| "readb[0x%x,0x%x] Error %d\n", |
| module, address, ret); |
| return ret; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) |
| { |
| struct twl6030_usb *twl; |
| struct device *dev; |
| struct twl4030_usb_data *pdata; |
| |
| twl = xceiv_to_twl(x); |
| dev = twl->dev; |
| pdata = dev->platform_data; |
| |
| pdata->phy_set_clock(twl->dev, on); |
| |
| return 0; |
| } |
| |
| static int twl6030_phy_init(struct otg_transceiver *x) |
| { |
| struct twl6030_usb *twl; |
| struct device *dev; |
| struct twl4030_usb_data *pdata; |
| |
| twl = xceiv_to_twl(x); |
| dev = twl->dev; |
| pdata = dev->platform_data; |
| |
| if (twl->linkstat == USB_EVENT_ID) |
| pdata->phy_power(twl->dev, 1, 1); |
| else |
| pdata->phy_power(twl->dev, 0, 1); |
| |
| return 0; |
| } |
| |
| static void twl6030_phy_shutdown(struct otg_transceiver *x) |
| { |
| struct twl6030_usb *twl; |
| struct device *dev; |
| struct twl4030_usb_data *pdata; |
| |
| twl = xceiv_to_twl(x); |
| dev = twl->dev; |
| pdata = dev->platform_data; |
| pdata->phy_power(twl->dev, 0, 0); |
| } |
| |
| static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend) |
| { |
| struct twl6030_usb *twl = xceiv_to_twl(x); |
| struct device *dev = twl->dev; |
| struct twl4030_usb_data *pdata = dev->platform_data; |
| |
| pdata->phy_suspend(dev, suspend); |
| |
| return 0; |
| } |
| |
| static int twl6030_start_srp(struct otg_transceiver *x) |
| { |
| struct twl6030_usb *twl = xceiv_to_twl(x); |
| |
| twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); |
| twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); |
| |
| mdelay(100); |
| twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR); |
| |
| return 0; |
| } |
| |
| static int twl6030_usb_ldo_init(struct twl6030_usb *twl) |
| { |
| char *regulator_name; |
| |
| if (twl->features & TWL6025_SUBCLASS) |
| regulator_name = "ldousb"; |
| else |
| regulator_name = "vusb"; |
| |
| /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ |
| twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); |
| |
| /* Program CFG_LDO_PD2 register and set VUSB bit */ |
| twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); |
| |
| /* Program MISC2 register and set bit VUSB_IN_VBAT */ |
| twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); |
| |
| twl->usb3v3 = regulator_get(twl->dev, regulator_name); |
| if (IS_ERR(twl->usb3v3)) |
| return -ENODEV; |
| |
| /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ |
| twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); |
| |
| /* |
| * Program the USB_ID_CTRL_SET register to enable GND drive |
| * and the ID comparators |
| */ |
| twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); |
| |
| return 0; |
| } |
| |
| static ssize_t twl6030_usb_vbus_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct twl6030_usb *twl = dev_get_drvdata(dev); |
| unsigned long flags; |
| int ret = -EINVAL; |
| |
| spin_lock_irqsave(&twl->lock, flags); |
| |
| switch (twl->linkstat) { |
| case USB_EVENT_VBUS: |
| ret = snprintf(buf, PAGE_SIZE, "vbus\n"); |
| break; |
| case USB_EVENT_ID: |
| ret = snprintf(buf, PAGE_SIZE, "id\n"); |
| break; |
| case USB_EVENT_NONE: |
| ret = snprintf(buf, PAGE_SIZE, "none\n"); |
| break; |
| default: |
| ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); |
| } |
| spin_unlock_irqrestore(&twl->lock, flags); |
| |
| return ret; |
| } |
| static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); |
| |
| static irqreturn_t twl6030_usb_irq(int irq, void *_twl) |
| { |
| struct twl6030_usb *twl = _twl; |
| int status; |
| u8 vbus_state, hw_state; |
| |
| hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); |
| |
| vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, |
| CONTROLLER_STAT1); |
| if (!(hw_state & STS_USB_ID)) { |
| if (vbus_state & VBUS_DET) { |
| regulator_enable(twl->usb3v3); |
| twl->asleep = 1; |
| status = USB_EVENT_VBUS; |
| twl->otg.default_a = false; |
| twl->otg.state = OTG_STATE_B_IDLE; |
| twl->linkstat = status; |
| twl->otg.last_event = status; |
| atomic_notifier_call_chain(&twl->otg.notifier, |
| status, twl->otg.gadget); |
| } else { |
| status = USB_EVENT_NONE; |
| twl->linkstat = status; |
| twl->otg.last_event = status; |
| atomic_notifier_call_chain(&twl->otg.notifier, |
| status, twl->otg.gadget); |
| if (twl->asleep) { |
| regulator_disable(twl->usb3v3); |
| twl->asleep = 0; |
| } |
| } |
| } |
| sysfs_notify(&twl->dev->kobj, NULL, "vbus"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) |
| { |
| struct twl6030_usb *twl = _twl; |
| int status = USB_EVENT_NONE; |
| u8 hw_state; |
| |
| hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); |
| |
| if (hw_state & STS_USB_ID) { |
| |
| regulator_enable(twl->usb3v3); |
| twl->asleep = 1; |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, |
| 0x10); |
| status = USB_EVENT_ID; |
| twl->otg.default_a = true; |
| twl->otg.state = OTG_STATE_A_IDLE; |
| twl->linkstat = status; |
| twl->otg.last_event = status; |
| atomic_notifier_call_chain(&twl->otg.notifier, status, |
| twl->otg.gadget); |
| } else { |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, |
| 0x10); |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, |
| 0x1); |
| } |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int twl6030_set_peripheral(struct otg_transceiver *x, |
| struct usb_gadget *gadget) |
| { |
| struct twl6030_usb *twl; |
| |
| if (!x) |
| return -ENODEV; |
| |
| twl = xceiv_to_twl(x); |
| twl->otg.gadget = gadget; |
| if (!gadget) |
| twl->otg.state = OTG_STATE_UNDEFINED; |
| |
| return 0; |
| } |
| |
| static int twl6030_enable_irq(struct otg_transceiver *x) |
| { |
| struct twl6030_usb *twl = xceiv_to_twl(x); |
| |
| twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); |
| twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); |
| twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); |
| |
| twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, |
| REG_INT_MSK_LINE_C); |
| twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, |
| REG_INT_MSK_STS_C); |
| twl6030_usb_irq(twl->irq2, twl); |
| twl6030_usbotg_irq(twl->irq1, twl); |
| |
| return 0; |
| } |
| |
| static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled) |
| { |
| struct twl6030_usb *twl = xceiv_to_twl(x); |
| |
| /* |
| * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 |
| * register. This enables boost mode. |
| */ |
| if (enabled) |
| twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, |
| CHARGERUSB_CTRL1); |
| else |
| twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, |
| CHARGERUSB_CTRL1); |
| return 0; |
| } |
| |
| static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host) |
| { |
| struct twl6030_usb *twl; |
| |
| if (!x) |
| return -ENODEV; |
| |
| twl = xceiv_to_twl(x); |
| twl->otg.host = host; |
| if (!host) |
| twl->otg.state = OTG_STATE_UNDEFINED; |
| return 0; |
| } |
| |
| static int __devinit twl6030_usb_probe(struct platform_device *pdev) |
| { |
| struct twl6030_usb *twl; |
| int status, err; |
| struct twl4030_usb_data *pdata; |
| struct device *dev = &pdev->dev; |
| pdata = dev->platform_data; |
| |
| twl = kzalloc(sizeof *twl, GFP_KERNEL); |
| if (!twl) |
| return -ENOMEM; |
| |
| twl->dev = &pdev->dev; |
| twl->irq1 = platform_get_irq(pdev, 0); |
| twl->irq2 = platform_get_irq(pdev, 1); |
| twl->features = pdata->features; |
| twl->otg.dev = twl->dev; |
| twl->otg.label = "twl6030"; |
| twl->otg.set_host = twl6030_set_host; |
| twl->otg.set_peripheral = twl6030_set_peripheral; |
| twl->otg.set_vbus = twl6030_set_vbus; |
| twl->otg.init = twl6030_phy_init; |
| twl->otg.shutdown = twl6030_phy_shutdown; |
| twl->otg.set_suspend = twl6030_phy_suspend; |
| twl->otg.start_srp = twl6030_start_srp; |
| |
| /* init spinlock for workqueue */ |
| spin_lock_init(&twl->lock); |
| |
| err = twl6030_usb_ldo_init(twl); |
| if (err) { |
| dev_err(&pdev->dev, "ldo init failed\n"); |
| kfree(twl); |
| return err; |
| } |
| otg_set_transceiver(&twl->otg); |
| |
| platform_set_drvdata(pdev, twl); |
| if (device_create_file(&pdev->dev, &dev_attr_vbus)) |
| dev_warn(&pdev->dev, "could not create sysfs file\n"); |
| |
| ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); |
| |
| twl->irq_enabled = true; |
| status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, |
| "twl6030_usb", twl); |
| if (status < 0) { |
| dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", |
| twl->irq1, status); |
| device_remove_file(twl->dev, &dev_attr_vbus); |
| kfree(twl); |
| return status; |
| } |
| |
| status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, |
| IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, |
| "twl6030_usb", twl); |
| if (status < 0) { |
| dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", |
| twl->irq2, status); |
| free_irq(twl->irq1, twl); |
| device_remove_file(twl->dev, &dev_attr_vbus); |
| kfree(twl); |
| return status; |
| } |
| |
| twl->asleep = 0; |
| pdata->phy_init(dev); |
| twl6030_phy_suspend(&twl->otg, 0); |
| twl6030_enable_irq(&twl->otg); |
| dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); |
| |
| return 0; |
| } |
| |
| static int __exit twl6030_usb_remove(struct platform_device *pdev) |
| { |
| struct twl6030_usb *twl = platform_get_drvdata(pdev); |
| |
| struct twl4030_usb_data *pdata; |
| struct device *dev = &pdev->dev; |
| pdata = dev->platform_data; |
| |
| twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, |
| REG_INT_MSK_LINE_C); |
| twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, |
| REG_INT_MSK_STS_C); |
| free_irq(twl->irq1, twl); |
| free_irq(twl->irq2, twl); |
| regulator_put(twl->usb3v3); |
| pdata->phy_exit(twl->dev); |
| device_remove_file(twl->dev, &dev_attr_vbus); |
| kfree(twl); |
| |
| return 0; |
| } |
| |
| static struct platform_driver twl6030_usb_driver = { |
| .probe = twl6030_usb_probe, |
| .remove = __exit_p(twl6030_usb_remove), |
| .driver = { |
| .name = "twl6030_usb", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init twl6030_usb_init(void) |
| { |
| return platform_driver_register(&twl6030_usb_driver); |
| } |
| subsys_initcall(twl6030_usb_init); |
| |
| static void __exit twl6030_usb_exit(void) |
| { |
| platform_driver_unregister(&twl6030_usb_driver); |
| } |
| module_exit(twl6030_usb_exit); |
| |
| MODULE_ALIAS("platform:twl6030_usb"); |
| MODULE_AUTHOR("Hema HK <hemahk@ti.com>"); |
| MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); |
| MODULE_LICENSE("GPL"); |