| /* |
| * SH-Mobile High-Definition Multimedia Interface (HDMI) driver |
| * for SLISHDMI13T and SLIPHDMIT IP cores |
| * |
| * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| |
| #include <video/sh_mobile_hdmi.h> |
| #include <video/sh_mobile_lcdc.h> |
| |
| #include "sh_mobile_lcdcfb.h" |
| |
| #define HDMI_SYSTEM_CTRL 0x00 /* System control */ |
| #define HDMI_L_R_DATA_SWAP_CTRL_RPKT 0x01 /* L/R data swap control, |
| bits 19..16 of 20-bit N for Audio Clock Regeneration packet */ |
| #define HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8 0x02 /* bits 15..8 of 20-bit N for Audio Clock Regeneration packet */ |
| #define HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0 0x03 /* bits 7..0 of 20-bit N for Audio Clock Regeneration packet */ |
| #define HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS 0x04 /* SPDIF audio sampling frequency, |
| bits 19..16 of Internal CTS */ |
| #define HDMI_INTERNAL_CTS_15_8 0x05 /* bits 15..8 of Internal CTS */ |
| #define HDMI_INTERNAL_CTS_7_0 0x06 /* bits 7..0 of Internal CTS */ |
| #define HDMI_EXTERNAL_CTS_19_16 0x07 /* External CTS */ |
| #define HDMI_EXTERNAL_CTS_15_8 0x08 /* External CTS */ |
| #define HDMI_EXTERNAL_CTS_7_0 0x09 /* External CTS */ |
| #define HDMI_AUDIO_SETTING_1 0x0A /* Audio setting.1 */ |
| #define HDMI_AUDIO_SETTING_2 0x0B /* Audio setting.2 */ |
| #define HDMI_I2S_AUDIO_SET 0x0C /* I2S audio setting */ |
| #define HDMI_DSD_AUDIO_SET 0x0D /* DSD audio setting */ |
| #define HDMI_DEBUG_MONITOR_1 0x0E /* Debug monitor.1 */ |
| #define HDMI_DEBUG_MONITOR_2 0x0F /* Debug monitor.2 */ |
| #define HDMI_I2S_INPUT_PIN_SWAP 0x10 /* I2S input pin swap */ |
| #define HDMI_AUDIO_STATUS_BITS_SETTING_1 0x11 /* Audio status bits setting.1 */ |
| #define HDMI_AUDIO_STATUS_BITS_SETTING_2 0x12 /* Audio status bits setting.2 */ |
| #define HDMI_CATEGORY_CODE 0x13 /* Category code */ |
| #define HDMI_SOURCE_NUM_AUDIO_WORD_LEN 0x14 /* Source number/Audio word length */ |
| #define HDMI_AUDIO_VIDEO_SETTING_1 0x15 /* Audio/Video setting.1 */ |
| #define HDMI_VIDEO_SETTING_1 0x16 /* Video setting.1 */ |
| #define HDMI_DEEP_COLOR_MODES 0x17 /* Deep Color Modes */ |
| |
| /* 12 16- and 10-bit Color space conversion parameters: 0x18..0x2f */ |
| #define HDMI_COLOR_SPACE_CONVERSION_PARAMETERS 0x18 |
| |
| #define HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS 0x30 /* External video parameter settings */ |
| #define HDMI_EXTERNAL_H_TOTAL_7_0 0x31 /* External horizontal total (LSB) */ |
| #define HDMI_EXTERNAL_H_TOTAL_11_8 0x32 /* External horizontal total (MSB) */ |
| #define HDMI_EXTERNAL_H_BLANK_7_0 0x33 /* External horizontal blank (LSB) */ |
| #define HDMI_EXTERNAL_H_BLANK_9_8 0x34 /* External horizontal blank (MSB) */ |
| #define HDMI_EXTERNAL_H_DELAY_7_0 0x35 /* External horizontal delay (LSB) */ |
| #define HDMI_EXTERNAL_H_DELAY_9_8 0x36 /* External horizontal delay (MSB) */ |
| #define HDMI_EXTERNAL_H_DURATION_7_0 0x37 /* External horizontal duration (LSB) */ |
| #define HDMI_EXTERNAL_H_DURATION_9_8 0x38 /* External horizontal duration (MSB) */ |
| #define HDMI_EXTERNAL_V_TOTAL_7_0 0x39 /* External vertical total (LSB) */ |
| #define HDMI_EXTERNAL_V_TOTAL_9_8 0x3A /* External vertical total (MSB) */ |
| #define HDMI_AUDIO_VIDEO_SETTING_2 0x3B /* Audio/Video setting.2 */ |
| #define HDMI_EXTERNAL_V_BLANK 0x3D /* External vertical blank */ |
| #define HDMI_EXTERNAL_V_DELAY 0x3E /* External vertical delay */ |
| #define HDMI_EXTERNAL_V_DURATION 0x3F /* External vertical duration */ |
| #define HDMI_CTRL_PKT_MANUAL_SEND_CONTROL 0x40 /* Control packet manual send control */ |
| #define HDMI_CTRL_PKT_AUTO_SEND 0x41 /* Control packet auto send with VSYNC control */ |
| #define HDMI_AUTO_CHECKSUM_OPTION 0x42 /* Auto checksum option */ |
| #define HDMI_VIDEO_SETTING_2 0x45 /* Video setting.2 */ |
| #define HDMI_OUTPUT_OPTION 0x46 /* Output option */ |
| #define HDMI_SLIPHDMIT_PARAM_OPTION 0x51 /* SLIPHDMIT parameter option */ |
| #define HDMI_HSYNC_PMENT_AT_EMB_7_0 0x52 /* HSYNC placement at embedded sync (LSB) */ |
| #define HDMI_HSYNC_PMENT_AT_EMB_15_8 0x53 /* HSYNC placement at embedded sync (MSB) */ |
| #define HDMI_VSYNC_PMENT_AT_EMB_7_0 0x54 /* VSYNC placement at embedded sync (LSB) */ |
| #define HDMI_VSYNC_PMENT_AT_EMB_14_8 0x55 /* VSYNC placement at embedded sync (MSB) */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_1 0x56 /* SLIPHDMIT parameter settings.1 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_2 0x57 /* SLIPHDMIT parameter settings.2 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_3 0x58 /* SLIPHDMIT parameter settings.3 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_5 0x59 /* SLIPHDMIT parameter settings.5 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_6 0x5A /* SLIPHDMIT parameter settings.6 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_7 0x5B /* SLIPHDMIT parameter settings.7 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_8 0x5C /* SLIPHDMIT parameter settings.8 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_9 0x5D /* SLIPHDMIT parameter settings.9 */ |
| #define HDMI_SLIPHDMIT_PARAM_SETTINGS_10 0x5E /* SLIPHDMIT parameter settings.10 */ |
| #define HDMI_CTRL_PKT_BUF_INDEX 0x5F /* Control packet buffer index */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_HB0 0x60 /* Control packet data buffer access window - HB0 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_HB1 0x61 /* Control packet data buffer access window - HB1 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_HB2 0x62 /* Control packet data buffer access window - HB2 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB0 0x63 /* Control packet data buffer access window - PB0 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB1 0x64 /* Control packet data buffer access window - PB1 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB2 0x65 /* Control packet data buffer access window - PB2 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB3 0x66 /* Control packet data buffer access window - PB3 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB4 0x67 /* Control packet data buffer access window - PB4 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB5 0x68 /* Control packet data buffer access window - PB5 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB6 0x69 /* Control packet data buffer access window - PB6 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB7 0x6A /* Control packet data buffer access window - PB7 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB8 0x6B /* Control packet data buffer access window - PB8 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB9 0x6C /* Control packet data buffer access window - PB9 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB10 0x6D /* Control packet data buffer access window - PB10 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB11 0x6E /* Control packet data buffer access window - PB11 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB12 0x6F /* Control packet data buffer access window - PB12 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB13 0x70 /* Control packet data buffer access window - PB13 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB14 0x71 /* Control packet data buffer access window - PB14 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB15 0x72 /* Control packet data buffer access window - PB15 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB16 0x73 /* Control packet data buffer access window - PB16 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB17 0x74 /* Control packet data buffer access window - PB17 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB18 0x75 /* Control packet data buffer access window - PB18 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB19 0x76 /* Control packet data buffer access window - PB19 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB20 0x77 /* Control packet data buffer access window - PB20 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB21 0x78 /* Control packet data buffer access window - PB21 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB22 0x79 /* Control packet data buffer access window - PB22 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB23 0x7A /* Control packet data buffer access window - PB23 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB24 0x7B /* Control packet data buffer access window - PB24 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB25 0x7C /* Control packet data buffer access window - PB25 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB26 0x7D /* Control packet data buffer access window - PB26 */ |
| #define HDMI_CTRL_PKT_BUF_ACCESS_PB27 0x7E /* Control packet data buffer access window - PB27 */ |
| #define HDMI_EDID_KSV_FIFO_ACCESS_WINDOW 0x80 /* EDID/KSV FIFO access window */ |
| #define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_7_0 0x81 /* DDC bus access frequency control (LSB) */ |
| #define HDMI_DDC_BUS_ACCESS_FREQ_CTRL_15_8 0x82 /* DDC bus access frequency control (MSB) */ |
| #define HDMI_INTERRUPT_MASK_1 0x92 /* Interrupt mask.1 */ |
| #define HDMI_INTERRUPT_MASK_2 0x93 /* Interrupt mask.2 */ |
| #define HDMI_INTERRUPT_STATUS_1 0x94 /* Interrupt status.1 */ |
| #define HDMI_INTERRUPT_STATUS_2 0x95 /* Interrupt status.2 */ |
| #define HDMI_INTERRUPT_MASK_3 0x96 /* Interrupt mask.3 */ |
| #define HDMI_INTERRUPT_MASK_4 0x97 /* Interrupt mask.4 */ |
| #define HDMI_INTERRUPT_STATUS_3 0x98 /* Interrupt status.3 */ |
| #define HDMI_INTERRUPT_STATUS_4 0x99 /* Interrupt status.4 */ |
| #define HDMI_SOFTWARE_HDCP_CONTROL_1 0x9A /* Software HDCP control.1 */ |
| #define HDMI_FRAME_COUNTER 0x9C /* Frame counter */ |
| #define HDMI_FRAME_COUNTER_FOR_RI_CHECK 0x9D /* Frame counter for Ri check */ |
| #define HDMI_HDCP_CONTROL 0xAF /* HDCP control */ |
| #define HDMI_RI_FRAME_COUNT_REGISTER 0xB2 /* Ri frame count register */ |
| #define HDMI_DDC_BUS_CONTROL 0xB7 /* DDC bus control */ |
| #define HDMI_HDCP_STATUS 0xB8 /* HDCP status */ |
| #define HDMI_SHA0 0xB9 /* sha0 */ |
| #define HDMI_SHA1 0xBA /* sha1 */ |
| #define HDMI_SHA2 0xBB /* sha2 */ |
| #define HDMI_SHA3 0xBC /* sha3 */ |
| #define HDMI_SHA4 0xBD /* sha4 */ |
| #define HDMI_BCAPS_READ 0xBE /* BCAPS read / debug */ |
| #define HDMI_AKSV_BKSV_7_0_MONITOR 0xBF /* AKSV/BKSV[7:0] monitor */ |
| #define HDMI_AKSV_BKSV_15_8_MONITOR 0xC0 /* AKSV/BKSV[15:8] monitor */ |
| #define HDMI_AKSV_BKSV_23_16_MONITOR 0xC1 /* AKSV/BKSV[23:16] monitor */ |
| #define HDMI_AKSV_BKSV_31_24_MONITOR 0xC2 /* AKSV/BKSV[31:24] monitor */ |
| #define HDMI_AKSV_BKSV_39_32_MONITOR 0xC3 /* AKSV/BKSV[39:32] monitor */ |
| #define HDMI_EDID_SEGMENT_POINTER 0xC4 /* EDID segment pointer */ |
| #define HDMI_EDID_WORD_ADDRESS 0xC5 /* EDID word address */ |
| #define HDMI_EDID_DATA_FIFO_ADDRESS 0xC6 /* EDID data FIFO address */ |
| #define HDMI_NUM_OF_HDMI_DEVICES 0xC7 /* Number of HDMI devices */ |
| #define HDMI_HDCP_ERROR_CODE 0xC8 /* HDCP error code */ |
| #define HDMI_100MS_TIMER_SET 0xC9 /* 100ms timer setting */ |
| #define HDMI_5SEC_TIMER_SET 0xCA /* 5sec timer setting */ |
| #define HDMI_RI_READ_COUNT 0xCB /* Ri read count */ |
| #define HDMI_AN_SEED 0xCC /* An seed */ |
| #define HDMI_MAX_NUM_OF_RCIVRS_ALLOWED 0xCD /* Maximum number of receivers allowed */ |
| #define HDMI_HDCP_MEMORY_ACCESS_CONTROL_1 0xCE /* HDCP memory access control.1 */ |
| #define HDMI_HDCP_MEMORY_ACCESS_CONTROL_2 0xCF /* HDCP memory access control.2 */ |
| #define HDMI_HDCP_CONTROL_2 0xD0 /* HDCP Control 2 */ |
| #define HDMI_HDCP_KEY_MEMORY_CONTROL 0xD2 /* HDCP Key Memory Control */ |
| #define HDMI_COLOR_SPACE_CONV_CONFIG_1 0xD3 /* Color space conversion configuration.1 */ |
| #define HDMI_VIDEO_SETTING_3 0xD4 /* Video setting.3 */ |
| #define HDMI_RI_7_0 0xD5 /* Ri[7:0] */ |
| #define HDMI_RI_15_8 0xD6 /* Ri[15:8] */ |
| #define HDMI_PJ 0xD7 /* Pj */ |
| #define HDMI_SHA_RD 0xD8 /* sha_rd */ |
| #define HDMI_RI_7_0_SAVED 0xD9 /* Ri[7:0] saved */ |
| #define HDMI_RI_15_8_SAVED 0xDA /* Ri[15:8] saved */ |
| #define HDMI_PJ_SAVED 0xDB /* Pj saved */ |
| #define HDMI_NUM_OF_DEVICES 0xDC /* Number of devices */ |
| #define HDMI_HOT_PLUG_MSENS_STATUS 0xDF /* Hot plug/MSENS status */ |
| #define HDMI_BCAPS_WRITE 0xE0 /* bcaps */ |
| #define HDMI_BSTAT_7_0 0xE1 /* bstat[7:0] */ |
| #define HDMI_BSTAT_15_8 0xE2 /* bstat[15:8] */ |
| #define HDMI_BKSV_7_0 0xE3 /* bksv[7:0] */ |
| #define HDMI_BKSV_15_8 0xE4 /* bksv[15:8] */ |
| #define HDMI_BKSV_23_16 0xE5 /* bksv[23:16] */ |
| #define HDMI_BKSV_31_24 0xE6 /* bksv[31:24] */ |
| #define HDMI_BKSV_39_32 0xE7 /* bksv[39:32] */ |
| #define HDMI_AN_7_0 0xE8 /* An[7:0] */ |
| #define HDMI_AN_15_8 0xE9 /* An [15:8] */ |
| #define HDMI_AN_23_16 0xEA /* An [23:16] */ |
| #define HDMI_AN_31_24 0xEB /* An [31:24] */ |
| #define HDMI_AN_39_32 0xEC /* An [39:32] */ |
| #define HDMI_AN_47_40 0xED /* An [47:40] */ |
| #define HDMI_AN_55_48 0xEE /* An [55:48] */ |
| #define HDMI_AN_63_56 0xEF /* An [63:56] */ |
| #define HDMI_PRODUCT_ID 0xF0 /* Product ID */ |
| #define HDMI_REVISION_ID 0xF1 /* Revision ID */ |
| #define HDMI_TEST_MODE 0xFE /* Test mode */ |
| |
| enum hotplug_state { |
| HDMI_HOTPLUG_DISCONNECTED, |
| HDMI_HOTPLUG_CONNECTED, |
| HDMI_HOTPLUG_EDID_DONE, |
| }; |
| |
| struct sh_hdmi { |
| void __iomem *base; |
| enum hotplug_state hp_state; /* hot-plug status */ |
| u8 preprogrammed_vic; /* use a pre-programmed VIC or |
| the external mode */ |
| u8 edid_block_addr; |
| u8 edid_segment_nr; |
| u8 edid_blocks; |
| struct clk *hdmi_clk; |
| struct device *dev; |
| struct fb_info *info; |
| struct mutex mutex; /* Protect the info pointer */ |
| struct delayed_work edid_work; |
| struct fb_var_screeninfo var; |
| struct fb_monspecs monspec; |
| struct notifier_block notifier; |
| }; |
| |
| static void hdmi_write(struct sh_hdmi *hdmi, u8 data, u8 reg) |
| { |
| iowrite8(data, hdmi->base + reg); |
| } |
| |
| static u8 hdmi_read(struct sh_hdmi *hdmi, u8 reg) |
| { |
| return ioread8(hdmi->base + reg); |
| } |
| |
| /* |
| * HDMI sound |
| */ |
| static unsigned int sh_hdmi_snd_read(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| struct sh_hdmi *hdmi = snd_soc_codec_get_drvdata(codec); |
| |
| return hdmi_read(hdmi, reg); |
| } |
| |
| static int sh_hdmi_snd_write(struct snd_soc_codec *codec, |
| unsigned int reg, |
| unsigned int value) |
| { |
| struct sh_hdmi *hdmi = snd_soc_codec_get_drvdata(codec); |
| |
| hdmi_write(hdmi, value, reg); |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver sh_hdmi_dai = { |
| .name = "sh_mobile_hdmi-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 8, |
| .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | |
| SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | |
| SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | |
| SNDRV_PCM_RATE_192000, |
| .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE, |
| }, |
| }; |
| |
| static int sh_hdmi_snd_probe(struct snd_soc_codec *codec) |
| { |
| dev_info(codec->dev, "SH Mobile HDMI Audio Codec"); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver soc_codec_dev_sh_hdmi = { |
| .probe = sh_hdmi_snd_probe, |
| .read = sh_hdmi_snd_read, |
| .write = sh_hdmi_snd_write, |
| }; |
| |
| /* |
| * HDMI video |
| */ |
| |
| /* External video parameter settings */ |
| static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi) |
| { |
| struct fb_var_screeninfo *var = &hdmi->var; |
| u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset; |
| u8 sync = 0; |
| |
| htotal = var->xres + var->right_margin + var->left_margin + var->hsync_len; |
| |
| hdelay = var->hsync_len + var->left_margin; |
| hblank = var->right_margin + hdelay; |
| |
| /* |
| * Vertical timing looks a bit different in Figure 18, |
| * but let's try the same first by setting offset = 0 |
| */ |
| vtotal = var->yres + var->upper_margin + var->lower_margin + var->vsync_len; |
| |
| vdelay = var->vsync_len + var->upper_margin; |
| vblank = var->lower_margin + vdelay; |
| voffset = min(var->upper_margin / 2, 6U); |
| |
| /* |
| * [3]: VSYNC polarity: Positive |
| * [2]: HSYNC polarity: Positive |
| * [1]: Interlace/Progressive: Progressive |
| * [0]: External video settings enable: used. |
| */ |
| if (var->sync & FB_SYNC_HOR_HIGH_ACT) |
| sync |= 4; |
| if (var->sync & FB_SYNC_VERT_HIGH_ACT) |
| sync |= 8; |
| |
| dev_dbg(hdmi->dev, "H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n", |
| htotal, hblank, hdelay, var->hsync_len, |
| vtotal, vblank, vdelay, var->vsync_len, sync); |
| |
| hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS); |
| |
| hdmi_write(hdmi, htotal, HDMI_EXTERNAL_H_TOTAL_7_0); |
| hdmi_write(hdmi, htotal >> 8, HDMI_EXTERNAL_H_TOTAL_11_8); |
| |
| hdmi_write(hdmi, hblank, HDMI_EXTERNAL_H_BLANK_7_0); |
| hdmi_write(hdmi, hblank >> 8, HDMI_EXTERNAL_H_BLANK_9_8); |
| |
| hdmi_write(hdmi, hdelay, HDMI_EXTERNAL_H_DELAY_7_0); |
| hdmi_write(hdmi, hdelay >> 8, HDMI_EXTERNAL_H_DELAY_9_8); |
| |
| hdmi_write(hdmi, var->hsync_len, HDMI_EXTERNAL_H_DURATION_7_0); |
| hdmi_write(hdmi, var->hsync_len >> 8, HDMI_EXTERNAL_H_DURATION_9_8); |
| |
| hdmi_write(hdmi, vtotal, HDMI_EXTERNAL_V_TOTAL_7_0); |
| hdmi_write(hdmi, vtotal >> 8, HDMI_EXTERNAL_V_TOTAL_9_8); |
| |
| hdmi_write(hdmi, vblank, HDMI_EXTERNAL_V_BLANK); |
| |
| hdmi_write(hdmi, vdelay, HDMI_EXTERNAL_V_DELAY); |
| |
| hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION); |
| |
| /* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for external mode */ |
| if (!hdmi->preprogrammed_vic) |
| hdmi_write(hdmi, sync | 1 | (voffset << 4), |
| HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS); |
| } |
| |
| /** |
| * sh_hdmi_video_config() |
| */ |
| static void sh_hdmi_video_config(struct sh_hdmi *hdmi) |
| { |
| /* |
| * [7:4]: Audio sampling frequency: 48kHz |
| * [3:1]: Input video format: RGB and YCbCr 4:4:4 (Y on Green) |
| * [0]: Internal/External DE select: internal |
| */ |
| hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1); |
| |
| /* |
| * [7:6]: Video output format: RGB 4:4:4 |
| * [5:4]: Input video data width: 8 bit |
| * [3:1]: EAV/SAV location: channel 1 |
| * [0]: Video input color space: RGB |
| */ |
| hdmi_write(hdmi, 0x34, HDMI_VIDEO_SETTING_1); |
| |
| /* |
| * [7:6]: Together with bit [6] of HDMI_AUDIO_VIDEO_SETTING_2, which is |
| * left at 0 by default, this configures 24bpp and sets the Color Depth |
| * (CD) field in the General Control Packet |
| */ |
| hdmi_write(hdmi, 0x20, HDMI_DEEP_COLOR_MODES); |
| } |
| |
| /** |
| * sh_hdmi_audio_config() |
| */ |
| static void sh_hdmi_audio_config(struct sh_hdmi *hdmi) |
| { |
| u8 data; |
| struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data; |
| |
| /* |
| * [7:4] L/R data swap control |
| * [3:0] appropriate N[19:16] |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_L_R_DATA_SWAP_CTRL_RPKT); |
| /* appropriate N[15:8] */ |
| hdmi_write(hdmi, 0x18, HDMI_20_BIT_N_FOR_AUDIO_RPKT_15_8); |
| /* appropriate N[7:0] */ |
| hdmi_write(hdmi, 0x00, HDMI_20_BIT_N_FOR_AUDIO_RPKT_7_0); |
| |
| /* [7:4] 48 kHz SPDIF not used */ |
| hdmi_write(hdmi, 0x20, HDMI_SPDIF_AUDIO_SAMP_FREQ_CTS); |
| |
| /* |
| * [6:5] set required down sampling rate if required |
| * [4:3] set required audio source |
| */ |
| switch (pdata->flags & HDMI_SND_SRC_MASK) { |
| default: |
| /* fall through */ |
| case HDMI_SND_SRC_I2S: |
| data = 0x0 << 3; |
| break; |
| case HDMI_SND_SRC_SPDIF: |
| data = 0x1 << 3; |
| break; |
| case HDMI_SND_SRC_DSD: |
| data = 0x2 << 3; |
| break; |
| case HDMI_SND_SRC_HBR: |
| data = 0x3 << 3; |
| break; |
| } |
| hdmi_write(hdmi, data, HDMI_AUDIO_SETTING_1); |
| |
| /* [3:0] set sending channel number for channel status */ |
| hdmi_write(hdmi, 0x40, HDMI_AUDIO_SETTING_2); |
| |
| /* |
| * [5:2] set valid I2S source input pin |
| * [1:0] set input I2S source mode |
| */ |
| hdmi_write(hdmi, 0x04, HDMI_I2S_AUDIO_SET); |
| |
| /* [7:4] set valid DSD source input pin */ |
| hdmi_write(hdmi, 0x00, HDMI_DSD_AUDIO_SET); |
| |
| /* [7:0] set appropriate I2S input pin swap settings if required */ |
| hdmi_write(hdmi, 0x00, HDMI_I2S_INPUT_PIN_SWAP); |
| |
| /* |
| * [7] set validity bit for channel status |
| * [3:0] set original sample frequency for channel status |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_1); |
| |
| /* |
| * [7] set value for channel status |
| * [6] set value for channel status |
| * [5] set copyright bit for channel status |
| * [4:2] set additional information for channel status |
| * [1:0] set clock accuracy for channel status |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_AUDIO_STATUS_BITS_SETTING_2); |
| |
| /* [7:0] set category code for channel status */ |
| hdmi_write(hdmi, 0x00, HDMI_CATEGORY_CODE); |
| |
| /* |
| * [7:4] set source number for channel status |
| * [3:0] set word length for channel status |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_SOURCE_NUM_AUDIO_WORD_LEN); |
| |
| /* [7:4] set sample frequency for channel status */ |
| hdmi_write(hdmi, 0x20, HDMI_AUDIO_VIDEO_SETTING_1); |
| } |
| |
| /** |
| * sh_hdmi_phy_config() - configure the HDMI PHY for the used video mode |
| */ |
| static void sh_hdmi_phy_config(struct sh_hdmi *hdmi) |
| { |
| if (hdmi->var.pixclock < 10000) { |
| /* for 1080p8bit 148MHz */ |
| hdmi_write(hdmi, 0x1d, HDMI_SLIPHDMIT_PARAM_SETTINGS_1); |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2); |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3); |
| hdmi_write(hdmi, 0x4c, HDMI_SLIPHDMIT_PARAM_SETTINGS_5); |
| hdmi_write(hdmi, 0x1e, HDMI_SLIPHDMIT_PARAM_SETTINGS_6); |
| hdmi_write(hdmi, 0x48, HDMI_SLIPHDMIT_PARAM_SETTINGS_7); |
| hdmi_write(hdmi, 0x0e, HDMI_SLIPHDMIT_PARAM_SETTINGS_8); |
| hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9); |
| hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10); |
| } else if (hdmi->var.pixclock < 30000) { |
| /* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */ |
| /* |
| * [1:0] Speed_A |
| * [3:2] Speed_B |
| * [4] PLLA_Bypass |
| * [6] DRV_TEST_EN |
| * [7] DRV_TEST_IN |
| */ |
| hdmi_write(hdmi, 0x0f, HDMI_SLIPHDMIT_PARAM_SETTINGS_1); |
| /* PLLB_CONFIG[17], PLLA_CONFIG[17] - not in PHY datasheet */ |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2); |
| /* |
| * [2:0] BGR_I_OFFSET |
| * [6:4] BGR_V_OFFSET |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3); |
| /* PLLA_CONFIG[7:0]: VCO gain, VCO offset, LPF resistance[0] */ |
| hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5); |
| /* |
| * PLLA_CONFIG[15:8]: regulator voltage[0], CP current, |
| * LPF capacitance, LPF resistance[1] |
| */ |
| hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6); |
| /* PLLB_CONFIG[7:0]: LPF resistance[0], VCO offset, VCO gain */ |
| hdmi_write(hdmi, 0x4A, HDMI_SLIPHDMIT_PARAM_SETTINGS_7); |
| /* |
| * PLLB_CONFIG[15:8]: regulator voltage[0], CP current, |
| * LPF capacitance, LPF resistance[1] |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_8); |
| /* DRV_CONFIG, PE_CONFIG */ |
| hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9); |
| /* |
| * [2:0] AMON_SEL (4 == LPF voltage) |
| * [4] PLLA_CONFIG[16] |
| * [5] PLLB_CONFIG[16] |
| */ |
| hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10); |
| } else { |
| /* for 480p8bit 27MHz */ |
| hdmi_write(hdmi, 0x19, HDMI_SLIPHDMIT_PARAM_SETTINGS_1); |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2); |
| hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3); |
| hdmi_write(hdmi, 0x44, HDMI_SLIPHDMIT_PARAM_SETTINGS_5); |
| hdmi_write(hdmi, 0x32, HDMI_SLIPHDMIT_PARAM_SETTINGS_6); |
| hdmi_write(hdmi, 0x48, HDMI_SLIPHDMIT_PARAM_SETTINGS_7); |
| hdmi_write(hdmi, 0x0F, HDMI_SLIPHDMIT_PARAM_SETTINGS_8); |
| hdmi_write(hdmi, 0x20, HDMI_SLIPHDMIT_PARAM_SETTINGS_9); |
| hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10); |
| } |
| } |
| |
| /** |
| * sh_hdmi_avi_infoframe_setup() - Auxiliary Video Information InfoFrame CONTROL PACKET |
| */ |
| static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi) |
| { |
| u8 vic; |
| |
| /* AVI InfoFrame */ |
| hdmi_write(hdmi, 0x06, HDMI_CTRL_PKT_BUF_INDEX); |
| |
| /* Packet Type = 0x82 */ |
| hdmi_write(hdmi, 0x82, HDMI_CTRL_PKT_BUF_ACCESS_HB0); |
| |
| /* Version = 0x02 */ |
| hdmi_write(hdmi, 0x02, HDMI_CTRL_PKT_BUF_ACCESS_HB1); |
| |
| /* Length = 13 (0x0D) */ |
| hdmi_write(hdmi, 0x0D, HDMI_CTRL_PKT_BUF_ACCESS_HB2); |
| |
| /* N. A. Checksum */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0); |
| |
| /* |
| * Y = RGB |
| * A0 = No Data |
| * B = Bar Data not valid |
| * S = No Data |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1); |
| |
| /* |
| * [7:6] C = Colorimetry: no data |
| * [5:4] M = 2: 16:9, 1: 4:3 Picture Aspect Ratio |
| * [3:0] R = 8: Active Frame Aspect Ratio: same as picture aspect ratio |
| */ |
| hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2); |
| |
| /* |
| * ITC = No Data |
| * EC = xvYCC601 |
| * Q = Default (depends on video format) |
| * SC = No Known non_uniform Scaling |
| */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3); |
| |
| /* |
| * VIC should be ignored if external config is used, so, we could just use 0, |
| * but play safe and use a valid value in any case just in case |
| */ |
| if (hdmi->preprogrammed_vic) |
| vic = hdmi->preprogrammed_vic; |
| else |
| vic = 4; |
| hdmi_write(hdmi, vic, HDMI_CTRL_PKT_BUF_ACCESS_PB4); |
| |
| /* PR = No Repetition */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5); |
| |
| /* Line Number of End of Top Bar (lower 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6); |
| |
| /* Line Number of End of Top Bar (upper 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7); |
| |
| /* Line Number of Start of Bottom Bar (lower 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8); |
| |
| /* Line Number of Start of Bottom Bar (upper 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9); |
| |
| /* Pixel Number of End of Left Bar (lower 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10); |
| |
| /* Pixel Number of End of Left Bar (upper 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB11); |
| |
| /* Pixel Number of Start of Right Bar (lower 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB12); |
| |
| /* Pixel Number of Start of Right Bar (upper 8 bits) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB13); |
| } |
| |
| /** |
| * sh_hdmi_audio_infoframe_setup() - Audio InfoFrame of CONTROL PACKET |
| */ |
| static void sh_hdmi_audio_infoframe_setup(struct sh_hdmi *hdmi) |
| { |
| /* Audio InfoFrame */ |
| hdmi_write(hdmi, 0x08, HDMI_CTRL_PKT_BUF_INDEX); |
| |
| /* Packet Type = 0x84 */ |
| hdmi_write(hdmi, 0x84, HDMI_CTRL_PKT_BUF_ACCESS_HB0); |
| |
| /* Version Number = 0x01 */ |
| hdmi_write(hdmi, 0x01, HDMI_CTRL_PKT_BUF_ACCESS_HB1); |
| |
| /* 0 Length = 10 (0x0A) */ |
| hdmi_write(hdmi, 0x0A, HDMI_CTRL_PKT_BUF_ACCESS_HB2); |
| |
| /* n. a. Checksum */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB0); |
| |
| /* Audio Channel Count = Refer to Stream Header */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1); |
| |
| /* Refer to Stream Header */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB2); |
| |
| /* Format depends on coding type (i.e. CT0...CT3) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3); |
| |
| /* Speaker Channel Allocation = Front Right + Front Left */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB4); |
| |
| /* Level Shift Value = 0 dB, Down - mix is permitted or no information */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB5); |
| |
| /* Reserved (0) */ |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB6); |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB7); |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB8); |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB9); |
| hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB10); |
| } |
| |
| /** |
| * sh_hdmi_configure() - Initialise HDMI for output |
| */ |
| static void sh_hdmi_configure(struct sh_hdmi *hdmi) |
| { |
| /* Configure video format */ |
| sh_hdmi_video_config(hdmi); |
| |
| /* Configure audio format */ |
| sh_hdmi_audio_config(hdmi); |
| |
| /* Configure PHY */ |
| sh_hdmi_phy_config(hdmi); |
| |
| /* Auxiliary Video Information (AVI) InfoFrame */ |
| sh_hdmi_avi_infoframe_setup(hdmi); |
| |
| /* Audio InfoFrame */ |
| sh_hdmi_audio_infoframe_setup(hdmi); |
| |
| /* |
| * Control packet auto send with VSYNC control: auto send |
| * General control, Gamut metadata, ISRC, and ACP packets |
| */ |
| hdmi_write(hdmi, 0x8E, HDMI_CTRL_PKT_AUTO_SEND); |
| |
| /* FIXME */ |
| msleep(10); |
| |
| /* PS mode b->d, reset PLLA and PLLB */ |
| hdmi_write(hdmi, 0x4C, HDMI_SYSTEM_CTRL); |
| |
| udelay(10); |
| |
| hdmi_write(hdmi, 0x40, HDMI_SYSTEM_CTRL); |
| } |
| |
| static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi, |
| const struct fb_videomode *mode, |
| unsigned long *hdmi_rate, unsigned long *parent_rate) |
| { |
| unsigned long target = PICOS2KHZ(mode->pixclock) * 1000, rate_error; |
| struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data; |
| |
| *hdmi_rate = clk_round_rate(hdmi->hdmi_clk, target); |
| if ((long)*hdmi_rate < 0) |
| *hdmi_rate = clk_get_rate(hdmi->hdmi_clk); |
| |
| rate_error = (long)*hdmi_rate > 0 ? abs(*hdmi_rate - target) : ULONG_MAX; |
| if (rate_error && pdata->clk_optimize_parent) |
| rate_error = pdata->clk_optimize_parent(target, hdmi_rate, parent_rate); |
| else if (clk_get_parent(hdmi->hdmi_clk)) |
| *parent_rate = clk_get_rate(clk_get_parent(hdmi->hdmi_clk)); |
| |
| dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u\n", |
| mode->left_margin, mode->xres, |
| mode->right_margin, mode->hsync_len, |
| mode->upper_margin, mode->yres, |
| mode->lower_margin, mode->vsync_len); |
| |
| dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz, p=%luHz\n", target, |
| rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0, |
| mode->refresh, *parent_rate); |
| |
| return rate_error; |
| } |
| |
| static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate, |
| unsigned long *parent_rate) |
| { |
| struct fb_var_screeninfo tmpvar; |
| struct fb_var_screeninfo *var = &tmpvar; |
| const struct fb_videomode *mode, *found = NULL; |
| struct fb_info *info = hdmi->info; |
| struct fb_modelist *modelist = NULL; |
| unsigned int f_width = 0, f_height = 0, f_refresh = 0; |
| unsigned long found_rate_error = ULONG_MAX; /* silly compiler... */ |
| bool scanning = false, preferred_bad = false; |
| u8 edid[128]; |
| char *forced; |
| int i; |
| |
| /* Read EDID */ |
| dev_dbg(hdmi->dev, "Read back EDID code:"); |
| for (i = 0; i < 128; i++) { |
| edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW); |
| #ifdef DEBUG |
| if ((i % 16) == 0) { |
| printk(KERN_CONT "\n"); |
| printk(KERN_DEBUG "%02X | %02X", i, edid[i]); |
| } else { |
| printk(KERN_CONT " %02X", edid[i]); |
| } |
| #endif |
| } |
| #ifdef DEBUG |
| printk(KERN_CONT "\n"); |
| #endif |
| |
| if (!hdmi->edid_blocks) { |
| fb_edid_to_monspecs(edid, &hdmi->monspec); |
| hdmi->edid_blocks = edid[126] + 1; |
| |
| dev_dbg(hdmi->dev, "%d main modes, %d extension blocks\n", |
| hdmi->monspec.modedb_len, hdmi->edid_blocks - 1); |
| } else { |
| dev_dbg(hdmi->dev, "Extension %u detected, DTD start %u\n", |
| edid[0], edid[2]); |
| fb_edid_add_monspecs(edid, &hdmi->monspec); |
| } |
| |
| if (hdmi->edid_blocks > hdmi->edid_segment_nr * 2 + |
| (hdmi->edid_block_addr >> 7) + 1) { |
| /* More blocks to read */ |
| if (hdmi->edid_block_addr) { |
| hdmi->edid_block_addr = 0; |
| hdmi->edid_segment_nr++; |
| } else { |
| hdmi->edid_block_addr = 0x80; |
| } |
| /* Set EDID word address */ |
| hdmi_write(hdmi, hdmi->edid_block_addr, HDMI_EDID_WORD_ADDRESS); |
| /* Enable EDID interrupt */ |
| hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1); |
| /* Set EDID segment pointer - starts reading EDID */ |
| hdmi_write(hdmi, hdmi->edid_segment_nr, HDMI_EDID_SEGMENT_POINTER); |
| return -EAGAIN; |
| } |
| |
| /* All E-EDID blocks ready */ |
| dev_dbg(hdmi->dev, "%d main and extended modes\n", hdmi->monspec.modedb_len); |
| |
| fb_get_options("sh_mobile_lcdc", &forced); |
| if (forced && *forced) { |
| /* Only primitive parsing so far */ |
| i = sscanf(forced, "%ux%u@%u", |
| &f_width, &f_height, &f_refresh); |
| if (i < 2) { |
| f_width = 0; |
| f_height = 0; |
| } else { |
| /* The user wants us to use the EDID data */ |
| scanning = true; |
| } |
| dev_dbg(hdmi->dev, "Forced mode %ux%u@%uHz\n", |
| f_width, f_height, f_refresh); |
| } |
| |
| /* Walk monitor modes to find the best or the exact match */ |
| for (i = 0, mode = hdmi->monspec.modedb; |
| i < hdmi->monspec.modedb_len && scanning; |
| i++, mode++) { |
| unsigned long rate_error; |
| |
| if (!f_width && !f_height) { |
| /* |
| * A parameter string "video=sh_mobile_lcdc:0x0" means |
| * use the preferred EDID mode. If it is rejected by |
| * .fb_check_var(), keep looking, until an acceptable |
| * one is found. |
| */ |
| if ((mode->flag & FB_MODE_IS_FIRST) || preferred_bad) |
| scanning = false; |
| else |
| continue; |
| } else if (f_width != mode->xres || f_height != mode->yres) { |
| /* No interest in unmatching modes */ |
| continue; |
| } |
| |
| rate_error = sh_hdmi_rate_error(hdmi, mode, hdmi_rate, parent_rate); |
| |
| if (scanning) { |
| if (f_refresh == mode->refresh || (!f_refresh && !rate_error)) |
| /* |
| * Exact match if either the refresh rate |
| * matches or it hasn't been specified and we've |
| * found a mode, for which we can configure the |
| * clock precisely |
| */ |
| scanning = false; |
| else if (found && found_rate_error <= rate_error) |
| /* |
| * We otherwise search for the closest matching |
| * clock rate - either if no refresh rate has |
| * been specified or we cannot find an exactly |
| * matching one |
| */ |
| continue; |
| } |
| |
| /* Check if supported: sufficient fb memory, supported clock-rate */ |
| fb_videomode_to_var(var, mode); |
| |
| var->bits_per_pixel = info->var.bits_per_pixel; |
| |
| if (info && info->fbops->fb_check_var && |
| info->fbops->fb_check_var(var, info)) { |
| scanning = true; |
| preferred_bad = true; |
| continue; |
| } |
| |
| found = mode; |
| found_rate_error = rate_error; |
| } |
| |
| hdmi->var.width = hdmi->monspec.max_x * 10; |
| hdmi->var.height = hdmi->monspec.max_y * 10; |
| |
| /* |
| * TODO 1: if no ->info is present, postpone running the config until |
| * after ->info first gets registered. |
| * TODO 2: consider registering the HDMI platform device from the LCDC |
| * driver, and passing ->info with HDMI platform data. |
| */ |
| if (info && !found) { |
| modelist = info->modelist.next && |
| !list_empty(&info->modelist) ? |
| list_entry(info->modelist.next, |
| struct fb_modelist, list) : |
| NULL; |
| |
| if (modelist) { |
| found = &modelist->mode; |
| found_rate_error = sh_hdmi_rate_error(hdmi, found, hdmi_rate, parent_rate); |
| } |
| } |
| |
| /* No cookie today */ |
| if (!found) |
| return -ENXIO; |
| |
| if (found->xres == 640 && found->yres == 480 && found->refresh == 60) |
| hdmi->preprogrammed_vic = 1; |
| else if (found->xres == 720 && found->yres == 480 && found->refresh == 60) |
| hdmi->preprogrammed_vic = 2; |
| else if (found->xres == 720 && found->yres == 576 && found->refresh == 50) |
| hdmi->preprogrammed_vic = 17; |
| else if (found->xres == 1280 && found->yres == 720 && found->refresh == 60) |
| hdmi->preprogrammed_vic = 4; |
| else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 24) |
| hdmi->preprogrammed_vic = 32; |
| else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 50) |
| hdmi->preprogrammed_vic = 31; |
| else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 60) |
| hdmi->preprogrammed_vic = 16; |
| else |
| hdmi->preprogrammed_vic = 0; |
| |
| dev_dbg(hdmi->dev, "Using %s %s mode %ux%u@%uHz (%luHz), clock error %luHz\n", |
| modelist ? "default" : "EDID", hdmi->preprogrammed_vic ? "VIC" : "external", |
| found->xres, found->yres, found->refresh, |
| PICOS2KHZ(found->pixclock) * 1000, found_rate_error); |
| |
| fb_videomode_to_var(&hdmi->var, found); |
| sh_hdmi_external_video_param(hdmi); |
| |
| return 0; |
| } |
| |
| static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id) |
| { |
| struct sh_hdmi *hdmi = dev_id; |
| u8 status1, status2, mask1, mask2; |
| |
| /* mode_b and PLLA and PLLB reset */ |
| hdmi_write(hdmi, 0x2C, HDMI_SYSTEM_CTRL); |
| |
| /* How long shall reset be held? */ |
| udelay(10); |
| |
| /* mode_b and PLLA and PLLB reset release */ |
| hdmi_write(hdmi, 0x20, HDMI_SYSTEM_CTRL); |
| |
| status1 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_1); |
| status2 = hdmi_read(hdmi, HDMI_INTERRUPT_STATUS_2); |
| |
| mask1 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_1); |
| mask2 = hdmi_read(hdmi, HDMI_INTERRUPT_MASK_2); |
| |
| /* Correct would be to ack only set bits, but the datasheet requires 0xff */ |
| hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_1); |
| hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2); |
| |
| if (printk_ratelimit()) |
| dev_dbg(hdmi->dev, "IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n", |
| irq, status1, mask1, status2, mask2); |
| |
| if (!((status1 & mask1) | (status2 & mask2))) { |
| return IRQ_NONE; |
| } else if (status1 & 0xc0) { |
| u8 msens; |
| |
| /* Datasheet specifies 10ms... */ |
| udelay(500); |
| |
| msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS); |
| dev_dbg(hdmi->dev, "MSENS 0x%x\n", msens); |
| /* Check, if hot plug & MSENS pin status are both high */ |
| if ((msens & 0xC0) == 0xC0) { |
| /* Display plug in */ |
| hdmi->edid_segment_nr = 0; |
| hdmi->edid_block_addr = 0; |
| hdmi->edid_blocks = 0; |
| hdmi->hp_state = HDMI_HOTPLUG_CONNECTED; |
| |
| /* Set EDID word address */ |
| hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS); |
| /* Enable EDID interrupt */ |
| hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1); |
| /* Set EDID segment pointer - starts reading EDID */ |
| hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER); |
| } else if (!(status1 & 0x80)) { |
| /* Display unplug, beware multiple interrupts */ |
| if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED) { |
| hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED; |
| schedule_delayed_work(&hdmi->edid_work, 0); |
| } |
| /* display_off will switch back to mode_a */ |
| } |
| } else if (status1 & 2) { |
| /* EDID error interrupt: retry */ |
| /* Set EDID word address */ |
| hdmi_write(hdmi, hdmi->edid_block_addr, HDMI_EDID_WORD_ADDRESS); |
| /* Set EDID segment pointer */ |
| hdmi_write(hdmi, hdmi->edid_segment_nr, HDMI_EDID_SEGMENT_POINTER); |
| } else if (status1 & 4) { |
| /* Disable EDID interrupt */ |
| hdmi_write(hdmi, 0xC0, HDMI_INTERRUPT_MASK_1); |
| schedule_delayed_work(&hdmi->edid_work, msecs_to_jiffies(10)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* locking: called with info->lock held, or before register_framebuffer() */ |
| static void sh_hdmi_display_on(void *arg, struct fb_info *info) |
| { |
| /* |
| * info is guaranteed to be valid, when we are called, because our |
| * FB_EVENT_FB_UNBIND notify is also called with info->lock held |
| */ |
| struct sh_hdmi *hdmi = arg; |
| struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data; |
| struct sh_mobile_lcdc_chan *ch = info->par; |
| |
| dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__, |
| pdata->lcd_dev, info->state); |
| |
| /* No need to lock */ |
| hdmi->info = info; |
| |
| /* |
| * hp_state can be set to |
| * HDMI_HOTPLUG_DISCONNECTED: on monitor unplug |
| * HDMI_HOTPLUG_CONNECTED: on monitor plug-in |
| * HDMI_HOTPLUG_EDID_DONE: on EDID read completion |
| */ |
| switch (hdmi->hp_state) { |
| case HDMI_HOTPLUG_EDID_DONE: |
| /* PS mode d->e. All functions are active */ |
| hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL); |
| dev_dbg(hdmi->dev, "HDMI running\n"); |
| break; |
| case HDMI_HOTPLUG_DISCONNECTED: |
| info->state = FBINFO_STATE_SUSPENDED; |
| default: |
| hdmi->var = ch->display_var; |
| } |
| } |
| |
| /* locking: called with info->lock held */ |
| static void sh_hdmi_display_off(void *arg) |
| { |
| struct sh_hdmi *hdmi = arg; |
| struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data; |
| |
| dev_dbg(hdmi->dev, "%s(%p)\n", __func__, pdata->lcd_dev); |
| /* PS mode e->a */ |
| hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL); |
| } |
| |
| static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi) |
| { |
| struct fb_info *info = hdmi->info; |
| struct sh_mobile_lcdc_chan *ch = info->par; |
| struct fb_var_screeninfo *new_var = &hdmi->var, *old_var = &ch->display_var; |
| struct fb_videomode mode1, mode2; |
| |
| fb_var_to_videomode(&mode1, old_var); |
| fb_var_to_videomode(&mode2, new_var); |
| |
| dev_dbg(info->dev, "Old %ux%u, new %ux%u\n", |
| mode1.xres, mode1.yres, mode2.xres, mode2.yres); |
| |
| if (fb_mode_is_equal(&mode1, &mode2)) { |
| /* It can be a different monitor with an equal video-mode */ |
| old_var->width = new_var->width; |
| old_var->height = new_var->height; |
| return false; |
| } |
| |
| dev_dbg(info->dev, "Switching %u -> %u lines\n", |
| mode1.yres, mode2.yres); |
| *old_var = *new_var; |
| |
| return true; |
| } |
| |
| /** |
| * sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock |
| * @hdmi: driver context |
| * @hdmi_rate: HDMI clock frequency in Hz |
| * @parent_rate: if != 0 - set parent clock rate for optimal precision |
| * return: configured positive rate if successful |
| * 0 if couldn't set the rate, but managed to enable the |
| * clock, negative error, if couldn't enable the clock |
| */ |
| static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long hdmi_rate, |
| unsigned long parent_rate) |
| { |
| int ret; |
| |
| if (parent_rate && clk_get_parent(hdmi->hdmi_clk)) { |
| ret = clk_set_rate(clk_get_parent(hdmi->hdmi_clk), parent_rate); |
| if (ret < 0) { |
| dev_warn(hdmi->dev, "Cannot set parent rate %ld: %d\n", parent_rate, ret); |
| hdmi_rate = clk_round_rate(hdmi->hdmi_clk, hdmi_rate); |
| } else { |
| dev_dbg(hdmi->dev, "HDMI set parent frequency %lu\n", parent_rate); |
| } |
| } |
| |
| ret = clk_set_rate(hdmi->hdmi_clk, hdmi_rate); |
| if (ret < 0) { |
| dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", hdmi_rate, ret); |
| hdmi_rate = 0; |
| } else { |
| dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", hdmi_rate); |
| } |
| |
| return hdmi_rate; |
| } |
| |
| /* Hotplug interrupt occurred, read EDID */ |
| static void sh_hdmi_edid_work_fn(struct work_struct *work) |
| { |
| struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work); |
| struct fb_info *info; |
| struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data; |
| struct sh_mobile_lcdc_chan *ch; |
| int ret; |
| |
| dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__, |
| pdata->lcd_dev, hdmi->hp_state); |
| |
| if (!pdata->lcd_dev) |
| return; |
| |
| mutex_lock(&hdmi->mutex); |
| |
| info = hdmi->info; |
| |
| if (hdmi->hp_state == HDMI_HOTPLUG_CONNECTED) { |
| unsigned long parent_rate = 0, hdmi_rate; |
| |
| ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate); |
| if (ret < 0) |
| goto out; |
| |
| hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE; |
| |
| /* Reconfigure the clock */ |
| ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate); |
| if (ret < 0) |
| goto out; |
| |
| msleep(10); |
| sh_hdmi_configure(hdmi); |
| /* Switched to another (d) power-save mode */ |
| msleep(10); |
| |
| if (!info) |
| goto out; |
| |
| ch = info->par; |
| |
| if (lock_fb_info(info)) { |
| console_lock(); |
| |
| /* HDMI plug in */ |
| if (!sh_hdmi_must_reconfigure(hdmi) && |
| info->state == FBINFO_STATE_RUNNING) { |
| /* |
| * First activation with the default monitor - just turn |
| * on, if we run a resume here, the logo disappears |
| */ |
| info->var.width = hdmi->var.width; |
| info->var.height = hdmi->var.height; |
| sh_hdmi_display_on(hdmi, info); |
| } else { |
| /* New monitor or have to wake up */ |
| fb_set_suspend(info, 0); |
| } |
| |
| console_unlock(); |
| unlock_fb_info(info); |
| } |
| } else { |
| ret = 0; |
| if (!info) |
| goto out; |
| |
| hdmi->monspec.modedb_len = 0; |
| fb_destroy_modedb(hdmi->monspec.modedb); |
| hdmi->monspec.modedb = NULL; |
| |
| if (lock_fb_info(info)) { |
| console_lock(); |
| |
| /* HDMI disconnect */ |
| fb_set_suspend(info, 1); |
| |
| console_unlock(); |
| unlock_fb_info(info); |
| } |
| } |
| |
| out: |
| if (ret < 0 && ret != -EAGAIN) |
| hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED; |
| mutex_unlock(&hdmi->mutex); |
| |
| dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, pdata->lcd_dev); |
| } |
| |
| static int sh_hdmi_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct fb_event *event = data; |
| struct fb_info *info = event->info; |
| struct sh_mobile_lcdc_chan *ch = info->par; |
| struct sh_mobile_lcdc_board_cfg *board_cfg = &ch->cfg.board_cfg; |
| struct sh_hdmi *hdmi = board_cfg->board_data; |
| |
| if (!hdmi || nb != &hdmi->notifier || hdmi->info != info) |
| return NOTIFY_DONE; |
| |
| switch(action) { |
| case FB_EVENT_FB_REGISTERED: |
| /* Unneeded, activation taken care by sh_hdmi_display_on() */ |
| break; |
| case FB_EVENT_FB_UNREGISTERED: |
| /* |
| * We are called from unregister_framebuffer() with the |
| * info->lock held. This is bad for us, because we can race with |
| * the scheduled work, which has to call fb_set_suspend(), which |
| * takes info->lock internally, so, sh_hdmi_edid_work_fn() |
| * cannot take and hold info->lock for the whole function |
| * duration. Using an additional lock creates a classical AB-BA |
| * lock up. Therefore, we have to release the info->lock |
| * temporarily, synchronise with the work queue and re-acquire |
| * the info->lock. |
| */ |
| unlock_fb_info(info); |
| mutex_lock(&hdmi->mutex); |
| hdmi->info = NULL; |
| mutex_unlock(&hdmi->mutex); |
| lock_fb_info(info); |
| return NOTIFY_OK; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static int __init sh_hdmi_probe(struct platform_device *pdev) |
| { |
| struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data; |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct sh_mobile_lcdc_board_cfg *board_cfg; |
| int irq = platform_get_irq(pdev, 0), ret; |
| struct sh_hdmi *hdmi; |
| long rate; |
| |
| if (!res || !pdata || irq < 0) |
| return -ENODEV; |
| |
| hdmi = kzalloc(sizeof(*hdmi), GFP_KERNEL); |
| if (!hdmi) { |
| dev_err(&pdev->dev, "Cannot allocate device data\n"); |
| return -ENOMEM; |
| } |
| |
| mutex_init(&hdmi->mutex); |
| |
| hdmi->dev = &pdev->dev; |
| |
| hdmi->hdmi_clk = clk_get(&pdev->dev, "ick"); |
| if (IS_ERR(hdmi->hdmi_clk)) { |
| ret = PTR_ERR(hdmi->hdmi_clk); |
| dev_err(&pdev->dev, "Unable to get clock: %d\n", ret); |
| goto egetclk; |
| } |
| |
| /* An arbitrary relaxed pixclock just to get things started: from standard 480p */ |
| rate = clk_round_rate(hdmi->hdmi_clk, PICOS2KHZ(37037)); |
| if (rate > 0) |
| rate = sh_hdmi_clk_configure(hdmi, rate, 0); |
| |
| if (rate < 0) { |
| ret = rate; |
| goto erate; |
| } |
| |
| ret = clk_enable(hdmi->hdmi_clk); |
| if (ret < 0) { |
| dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret); |
| goto erate; |
| } |
| |
| dev_dbg(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate); |
| |
| if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) { |
| dev_err(&pdev->dev, "HDMI register region already claimed\n"); |
| ret = -EBUSY; |
| goto ereqreg; |
| } |
| |
| hdmi->base = ioremap(res->start, resource_size(res)); |
| if (!hdmi->base) { |
| dev_err(&pdev->dev, "HDMI register region already claimed\n"); |
| ret = -ENOMEM; |
| goto emap; |
| } |
| |
| platform_set_drvdata(pdev, hdmi); |
| |
| /* Set up LCDC callbacks */ |
| board_cfg = &pdata->lcd_chan->board_cfg; |
| board_cfg->owner = THIS_MODULE; |
| board_cfg->board_data = hdmi; |
| board_cfg->display_on = sh_hdmi_display_on; |
| board_cfg->display_off = sh_hdmi_display_off; |
| |
| INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn); |
| |
| pm_runtime_enable(&pdev->dev); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| /* Product and revision IDs are 0 in sh-mobile version */ |
| dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n", |
| hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID)); |
| |
| ret = request_irq(irq, sh_hdmi_hotplug, 0, |
| dev_name(&pdev->dev), hdmi); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to request irq: %d\n", ret); |
| goto ereqirq; |
| } |
| |
| ret = snd_soc_register_codec(&pdev->dev, |
| &soc_codec_dev_sh_hdmi, &sh_hdmi_dai, 1); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "codec registration failed\n"); |
| goto ecodec; |
| } |
| |
| hdmi->notifier.notifier_call = sh_hdmi_notify; |
| fb_register_client(&hdmi->notifier); |
| |
| return 0; |
| |
| ecodec: |
| free_irq(irq, hdmi); |
| ereqirq: |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| iounmap(hdmi->base); |
| emap: |
| release_mem_region(res->start, resource_size(res)); |
| ereqreg: |
| clk_disable(hdmi->hdmi_clk); |
| erate: |
| clk_put(hdmi->hdmi_clk); |
| egetclk: |
| mutex_destroy(&hdmi->mutex); |
| kfree(hdmi); |
| |
| return ret; |
| } |
| |
| static int __exit sh_hdmi_remove(struct platform_device *pdev) |
| { |
| struct sh_mobile_hdmi_info *pdata = pdev->dev.platform_data; |
| struct sh_hdmi *hdmi = platform_get_drvdata(pdev); |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| struct sh_mobile_lcdc_board_cfg *board_cfg = &pdata->lcd_chan->board_cfg; |
| int irq = platform_get_irq(pdev, 0); |
| |
| snd_soc_unregister_codec(&pdev->dev); |
| |
| fb_unregister_client(&hdmi->notifier); |
| |
| board_cfg->display_on = NULL; |
| board_cfg->display_off = NULL; |
| board_cfg->board_data = NULL; |
| board_cfg->owner = NULL; |
| |
| /* No new work will be scheduled, wait for running ISR */ |
| free_irq(irq, hdmi); |
| /* Wait for already scheduled work */ |
| cancel_delayed_work_sync(&hdmi->edid_work); |
| pm_runtime_put(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| clk_disable(hdmi->hdmi_clk); |
| clk_put(hdmi->hdmi_clk); |
| iounmap(hdmi->base); |
| release_mem_region(res->start, resource_size(res)); |
| mutex_destroy(&hdmi->mutex); |
| kfree(hdmi); |
| |
| return 0; |
| } |
| |
| static struct platform_driver sh_hdmi_driver = { |
| .remove = __exit_p(sh_hdmi_remove), |
| .driver = { |
| .name = "sh-mobile-hdmi", |
| }, |
| }; |
| |
| static int __init sh_hdmi_init(void) |
| { |
| return platform_driver_probe(&sh_hdmi_driver, sh_hdmi_probe); |
| } |
| module_init(sh_hdmi_init); |
| |
| static void __exit sh_hdmi_exit(void) |
| { |
| platform_driver_unregister(&sh_hdmi_driver); |
| } |
| module_exit(sh_hdmi_exit); |
| |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| MODULE_DESCRIPTION("SuperH / ARM-shmobile HDMI driver"); |
| MODULE_LICENSE("GPL v2"); |