| /* |
| * ADLX345/346 Three-Axis Digital Accelerometers (SPI Interface) |
| * |
| * Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc. |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/input.h> /* BUS_SPI */ |
| #include <linux/module.h> |
| #include <linux/spi/spi.h> |
| #include <linux/pm.h> |
| #include <linux/types.h> |
| #include "adxl34x.h" |
| |
| #define MAX_SPI_FREQ_HZ 5000000 |
| #define MAX_FREQ_NO_FIFODELAY 1500000 |
| #define ADXL34X_CMD_MULTB (1 << 6) |
| #define ADXL34X_CMD_READ (1 << 7) |
| #define ADXL34X_WRITECMD(reg) (reg & 0x3F) |
| #define ADXL34X_READCMD(reg) (ADXL34X_CMD_READ | (reg & 0x3F)) |
| #define ADXL34X_READMB_CMD(reg) (ADXL34X_CMD_READ | ADXL34X_CMD_MULTB \ |
| | (reg & 0x3F)) |
| |
| static int adxl34x_spi_read(struct device *dev, unsigned char reg) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| unsigned char cmd; |
| |
| cmd = ADXL34X_READCMD(reg); |
| |
| return spi_w8r8(spi, cmd); |
| } |
| |
| static int adxl34x_spi_write(struct device *dev, |
| unsigned char reg, unsigned char val) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| unsigned char buf[2]; |
| |
| buf[0] = ADXL34X_WRITECMD(reg); |
| buf[1] = val; |
| |
| return spi_write(spi, buf, sizeof(buf)); |
| } |
| |
| static int adxl34x_spi_read_block(struct device *dev, |
| unsigned char reg, int count, |
| void *buf) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| ssize_t status; |
| |
| reg = ADXL34X_READMB_CMD(reg); |
| status = spi_write_then_read(spi, ®, 1, buf, count); |
| |
| return (status < 0) ? status : 0; |
| } |
| |
| static const struct adxl34x_bus_ops adxl34x_spi_bops = { |
| .bustype = BUS_SPI, |
| .write = adxl34x_spi_write, |
| .read = adxl34x_spi_read, |
| .read_block = adxl34x_spi_read_block, |
| }; |
| |
| static int __devinit adxl34x_spi_probe(struct spi_device *spi) |
| { |
| struct adxl34x *ac; |
| |
| /* don't exceed max specified SPI CLK frequency */ |
| if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { |
| dev_err(&spi->dev, "SPI CLK %d Hz too fast\n", spi->max_speed_hz); |
| return -EINVAL; |
| } |
| |
| ac = adxl34x_probe(&spi->dev, spi->irq, |
| spi->max_speed_hz > MAX_FREQ_NO_FIFODELAY, |
| &adxl34x_spi_bops); |
| |
| if (IS_ERR(ac)) |
| return PTR_ERR(ac); |
| |
| spi_set_drvdata(spi, ac); |
| |
| return 0; |
| } |
| |
| static int __devexit adxl34x_spi_remove(struct spi_device *spi) |
| { |
| struct adxl34x *ac = dev_get_drvdata(&spi->dev); |
| |
| return adxl34x_remove(ac); |
| } |
| |
| #ifdef CONFIG_PM |
| static int adxl34x_spi_suspend(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct adxl34x *ac = dev_get_drvdata(&spi->dev); |
| |
| adxl34x_suspend(ac); |
| |
| return 0; |
| } |
| |
| static int adxl34x_spi_resume(struct device *dev) |
| { |
| struct spi_device *spi = to_spi_device(dev); |
| struct adxl34x *ac = dev_get_drvdata(&spi->dev); |
| |
| adxl34x_resume(ac); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(adxl34x_spi_pm, adxl34x_spi_suspend, |
| adxl34x_spi_resume); |
| |
| static struct spi_driver adxl34x_driver = { |
| .driver = { |
| .name = "adxl34x", |
| .owner = THIS_MODULE, |
| .pm = &adxl34x_spi_pm, |
| }, |
| .probe = adxl34x_spi_probe, |
| .remove = __devexit_p(adxl34x_spi_remove), |
| }; |
| |
| module_spi_driver(adxl34x_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); |
| MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver"); |
| MODULE_LICENSE("GPL"); |