| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include "./common.h" |
| #include "./pipe.h" |
| |
| /* |
| * macros |
| */ |
| #define usbhsp_priv_to_pipeinfo(pr) (&(pr)->pipe_info) |
| #define usbhsp_pipe_to_priv(p) ((p)->priv) |
| |
| #define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2) |
| |
| #define usbhsp_is_dcp(p) ((p)->priv->pipe_info.pipe == (p)) |
| |
| #define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f) |
| #define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0) |
| |
| #define usbhsp_type(p) ((p)->pipe_type) |
| #define usbhsp_type_is(p, t) ((p)->pipe_type == t) |
| |
| /* |
| * for debug |
| */ |
| static char *usbhsp_pipe_name[] = { |
| [USB_ENDPOINT_XFER_CONTROL] = "DCP", |
| [USB_ENDPOINT_XFER_BULK] = "BULK", |
| [USB_ENDPOINT_XFER_INT] = "INT", |
| [USB_ENDPOINT_XFER_ISOC] = "ISO", |
| }; |
| |
| /* |
| * usb request functions |
| */ |
| void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) |
| { |
| u16 val; |
| |
| val = usbhs_read(priv, USBREQ); |
| req->bRequest = (val >> 8) & 0xFF; |
| req->bRequestType = (val >> 0) & 0xFF; |
| |
| req->wValue = usbhs_read(priv, USBVAL); |
| req->wIndex = usbhs_read(priv, USBINDX); |
| req->wLength = usbhs_read(priv, USBLENG); |
| } |
| |
| void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) |
| { |
| usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); |
| usbhs_write(priv, USBVAL, req->wValue); |
| usbhs_write(priv, USBINDX, req->wIndex); |
| usbhs_write(priv, USBLENG, req->wLength); |
| } |
| |
| /* |
| * DCPCTR/PIPEnCTR functions |
| */ |
| static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| int offset = usbhsp_addr_offset(pipe); |
| |
| if (usbhsp_is_dcp(pipe)) |
| usbhs_bset(priv, DCPCTR, mask, val); |
| else |
| usbhs_bset(priv, PIPEnCTR + offset, mask, val); |
| } |
| |
| static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| int offset = usbhsp_addr_offset(pipe); |
| |
| if (usbhsp_is_dcp(pipe)) |
| return usbhs_read(priv, DCPCTR); |
| else |
| return usbhs_read(priv, PIPEnCTR + offset); |
| } |
| |
| /* |
| * DCP/PIPE functions |
| */ |
| static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, |
| u16 dcp_reg, u16 pipe_reg, |
| u16 mask, u16 val) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| |
| if (usbhsp_is_dcp(pipe)) |
| usbhs_bset(priv, dcp_reg, mask, val); |
| else |
| usbhs_bset(priv, pipe_reg, mask, val); |
| } |
| |
| static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, |
| u16 dcp_reg, u16 pipe_reg) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| |
| if (usbhsp_is_dcp(pipe)) |
| return usbhs_read(priv, dcp_reg); |
| else |
| return usbhs_read(priv, pipe_reg); |
| } |
| |
| /* |
| * DCPCFG/PIPECFG functions |
| */ |
| static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); |
| } |
| |
| /* |
| * PIPEBUF |
| */ |
| static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| if (usbhsp_is_dcp(pipe)) |
| return; |
| |
| __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); |
| } |
| |
| /* |
| * DCPMAXP/PIPEMAXP |
| */ |
| static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) |
| { |
| __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); |
| } |
| |
| static u16 usbhsp_pipe_maxp_get(struct usbhs_pipe *pipe) |
| { |
| return __usbhsp_pipe_xxx_get(pipe, DCPMAXP, PIPEMAXP); |
| } |
| |
| /* |
| * pipe control functions |
| */ |
| static void usbhsp_pipe_select(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| |
| /* |
| * On pipe, this is necessary before |
| * accesses to below registers. |
| * |
| * PIPESEL : usbhsp_pipe_select |
| * PIPECFG : usbhsp_pipe_cfg_xxx |
| * PIPEBUF : usbhsp_pipe_buf_xxx |
| * PIPEMAXP : usbhsp_pipe_maxp_xxx |
| * PIPEPERI |
| */ |
| |
| /* |
| * if pipe is dcp, no pipe is selected. |
| * it is no problem, because dcp have its register |
| */ |
| usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); |
| } |
| |
| static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| int timeout = 1024; |
| u16 val; |
| |
| /* |
| * make sure.... |
| * |
| * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is |
| * specified by the CURPIPE bits. |
| * When changing the setting of this bit after changing |
| * the PID bits for the selected pipe from BUF to NAK, |
| * check that CSSTS = 0 and PBUSY = 0. |
| */ |
| |
| /* |
| * CURPIPE bit = 0 |
| * |
| * see also |
| * "Operation" |
| * - "Pipe Control" |
| * - "Pipe Control Registers Switching Procedure" |
| */ |
| usbhs_write(priv, CFIFOSEL, 0); |
| usbhs_fifo_disable(pipe); |
| |
| do { |
| val = usbhsp_pipectrl_get(pipe); |
| val &= CSSTS | PID_MASK; |
| if (!val) |
| return 0; |
| |
| udelay(10); |
| |
| } while (timeout--); |
| |
| return -EBUSY; |
| } |
| |
| static int usbhsp_pipe_is_accessible(struct usbhs_pipe *pipe) |
| { |
| u16 val; |
| |
| val = usbhsp_pipectrl_get(pipe); |
| if (val & BSTS) |
| return 0; |
| |
| return -EBUSY; |
| } |
| |
| /* |
| * PID ctrl |
| */ |
| static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) |
| { |
| u16 pid = usbhsp_pipectrl_get(pipe); |
| |
| pid &= PID_MASK; |
| |
| /* |
| * see |
| * "Pipe n Control Register" - "PID" |
| */ |
| switch (pid) { |
| case PID_STALL11: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); |
| /* fall-through */ |
| case PID_STALL10: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); |
| } |
| } |
| |
| void usbhs_fifo_disable(struct usbhs_pipe *pipe) |
| { |
| int timeout = 1024; |
| u16 val; |
| |
| /* see "Pipe n Control Register" - "PID" */ |
| __usbhsp_pid_try_nak_if_stall(pipe); |
| |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); |
| |
| do { |
| val = usbhsp_pipectrl_get(pipe); |
| val &= PBUSY; |
| if (!val) |
| break; |
| |
| udelay(10); |
| } while (timeout--); |
| } |
| |
| void usbhs_fifo_enable(struct usbhs_pipe *pipe) |
| { |
| /* see "Pipe n Control Register" - "PID" */ |
| __usbhsp_pid_try_nak_if_stall(pipe); |
| |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); |
| } |
| |
| void usbhs_fifo_stall(struct usbhs_pipe *pipe) |
| { |
| u16 pid = usbhsp_pipectrl_get(pipe); |
| |
| pid &= PID_MASK; |
| |
| /* |
| * see |
| * "Pipe n Control Register" - "PID" |
| */ |
| switch (pid) { |
| case PID_NAK: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); |
| break; |
| case PID_BUF: |
| usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); |
| break; |
| } |
| } |
| |
| /* |
| * CFIFO ctrl |
| */ |
| void usbhs_fifo_send_terminator(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| |
| usbhs_bset(priv, CFIFOCTR, BVAL, BVAL); |
| } |
| |
| static void usbhsp_fifo_clear(struct usbhs_pipe *pipe) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| |
| usbhs_write(priv, CFIFOCTR, BCLR); |
| } |
| |
| static int usbhsp_fifo_barrier(struct usbhs_priv *priv) |
| { |
| int timeout = 1024; |
| |
| do { |
| /* The FIFO port is accessible */ |
| if (usbhs_read(priv, CFIFOCTR) & FRDY) |
| return 0; |
| |
| udelay(10); |
| } while (timeout--); |
| |
| return -EBUSY; |
| } |
| |
| static int usbhsp_fifo_rcv_len(struct usbhs_priv *priv) |
| { |
| return usbhs_read(priv, CFIFOCTR) & DTLN_MASK; |
| } |
| |
| static int usbhsp_fifo_select(struct usbhs_pipe *pipe, int write) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int timeout = 1024; |
| u16 mask = ((1 << 5) | 0xF); /* mask of ISEL | CURPIPE */ |
| u16 base = usbhs_pipe_number(pipe); /* CURPIPE */ |
| |
| if (usbhsp_is_dcp(pipe)) |
| base |= (1 == write) << 5; /* ISEL */ |
| |
| /* "base" will be used below */ |
| usbhs_write(priv, CFIFOSEL, base | MBW_32); |
| |
| /* check ISEL and CURPIPE value */ |
| while (timeout--) { |
| if (base == (mask & usbhs_read(priv, CFIFOSEL))) |
| return 0; |
| udelay(10); |
| } |
| |
| dev_err(dev, "fifo select error\n"); |
| |
| return -EIO; |
| } |
| |
| int usbhs_fifo_prepare_write(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_fifo_select(pipe, 1); |
| } |
| |
| int usbhs_fifo_write(struct usbhs_pipe *pipe, u8 *buf, int len) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| void __iomem *addr = priv->base + CFIFO; |
| int maxp = usbhs_pipe_get_maxpacket(pipe); |
| int total_len; |
| int i, ret; |
| |
| ret = usbhsp_pipe_is_accessible(pipe); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsp_fifo_select(pipe, 1); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsp_fifo_barrier(priv); |
| if (ret < 0) |
| return ret; |
| |
| len = min(len, maxp); |
| total_len = len; |
| |
| /* |
| * FIXME |
| * |
| * 32-bit access only |
| */ |
| if (len >= 4 && |
| !((unsigned long)buf & 0x03)) { |
| iowrite32_rep(addr, buf, len / 4); |
| len %= 4; |
| buf += total_len - len; |
| } |
| |
| /* the rest operation */ |
| for (i = 0; i < len; i++) |
| iowrite8(buf[i], addr + (0x03 - (i & 0x03))); |
| |
| if (total_len < maxp) |
| usbhs_fifo_send_terminator(pipe); |
| |
| return total_len; |
| } |
| |
| int usbhs_fifo_prepare_read(struct usbhs_pipe *pipe) |
| { |
| int ret; |
| |
| /* |
| * select pipe and enable it to prepare packet receive |
| */ |
| ret = usbhsp_fifo_select(pipe, 0); |
| if (ret < 0) |
| return ret; |
| |
| usbhs_fifo_enable(pipe); |
| |
| return ret; |
| } |
| |
| int usbhs_fifo_read(struct usbhs_pipe *pipe, u8 *buf, int len) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| void __iomem *addr = priv->base + CFIFO; |
| int rcv_len; |
| int i, ret; |
| int total_len; |
| u32 data = 0; |
| |
| ret = usbhsp_fifo_select(pipe, 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhsp_fifo_barrier(priv); |
| if (ret < 0) |
| return ret; |
| |
| rcv_len = usbhsp_fifo_rcv_len(priv); |
| |
| /* |
| * Buffer clear if Zero-Length packet |
| * |
| * see |
| * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function" |
| */ |
| if (0 == rcv_len) { |
| usbhsp_fifo_clear(pipe); |
| return 0; |
| } |
| |
| len = min(rcv_len, len); |
| total_len = len; |
| |
| /* |
| * FIXME |
| * |
| * 32-bit access only |
| */ |
| if (len >= 4 && |
| !((unsigned long)buf & 0x03)) { |
| ioread32_rep(addr, buf, len / 4); |
| len %= 4; |
| buf += rcv_len - len; |
| } |
| |
| /* the rest operation */ |
| for (i = 0; i < len; i++) { |
| if (!(i & 0x03)) |
| data = ioread32(addr); |
| |
| buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; |
| } |
| |
| return total_len; |
| } |
| |
| /* |
| * pipe setup |
| */ |
| static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe) |
| { |
| /* |
| * only ISO / BULK pipe can use double buffer |
| */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) || |
| usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, |
| const struct usb_endpoint_descriptor *desc, |
| int is_host) |
| { |
| u16 type = 0; |
| u16 bfre = 0; |
| u16 dblb = 0; |
| u16 cntmd = 0; |
| u16 dir = 0; |
| u16 epnum = 0; |
| u16 shtnak = 0; |
| u16 type_array[] = { |
| [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, |
| [USB_ENDPOINT_XFER_INT] = TYPE_INT, |
| [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, |
| }; |
| int is_double = usbhsp_possible_double_buffer(pipe); |
| |
| if (usbhsp_is_dcp(pipe)) |
| return -EINVAL; |
| |
| /* |
| * PIPECFG |
| * |
| * see |
| * - "Register Descriptions" - "PIPECFG" register |
| * - "Features" - "Pipe configuration" |
| * - "Operation" - "Pipe Control" |
| */ |
| |
| /* TYPE */ |
| type = type_array[usbhsp_type(pipe)]; |
| |
| /* BFRE */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || |
| usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| bfre = 0; /* FIXME */ |
| |
| /* DBLB */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || |
| usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| dblb = (is_double) ? DBLB : 0; |
| |
| /* CNTMD */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK)) |
| cntmd = 0; /* FIXME */ |
| |
| /* DIR */ |
| if (usb_endpoint_dir_in(desc)) |
| usbhsp_flags_set(pipe, IS_DIR_IN); |
| |
| if ((is_host && usb_endpoint_dir_out(desc)) || |
| (!is_host && usb_endpoint_dir_in(desc))) |
| dir |= DIR_OUT; |
| |
| /* SHTNAK */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_BULK) && |
| !dir) |
| shtnak = SHTNAK; |
| |
| /* EPNUM */ |
| epnum = 0xF & usb_endpoint_num(desc); |
| |
| return type | |
| bfre | |
| dblb | |
| cntmd | |
| dir | |
| shtnak | |
| epnum; |
| } |
| |
| static u16 usbhsp_setup_pipemaxp(struct usbhs_pipe *pipe, |
| const struct usb_endpoint_descriptor *desc, |
| int is_host) |
| { |
| /* host should set DEVSEL */ |
| |
| /* reutn MXPS */ |
| return PIPE_MAXP_MASK & le16_to_cpu(desc->wMaxPacketSize); |
| } |
| |
| static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe, |
| const struct usb_endpoint_descriptor *desc, |
| int is_host) |
| { |
| struct usbhs_priv *priv = usbhsp_pipe_to_priv(pipe); |
| struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv); |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int pipe_num = usbhs_pipe_number(pipe); |
| int is_double = usbhsp_possible_double_buffer(pipe); |
| u16 buff_size; |
| u16 bufnmb; |
| u16 bufnmb_cnt; |
| |
| /* |
| * PIPEBUF |
| * |
| * see |
| * - "Register Descriptions" - "PIPEBUF" register |
| * - "Features" - "Pipe configuration" |
| * - "Operation" - "FIFO Buffer Memory" |
| * - "Operation" - "Pipe Control" |
| * |
| * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724) |
| * |
| * BUFNMB: PIPE |
| * 0: pipe0 (DCP 256byte) |
| * 1: - |
| * 2: - |
| * 3: - |
| * 4: pipe6 (INT 64byte) |
| * 5: pipe7 (INT 64byte) |
| * 6: pipe8 (INT 64byte) |
| * 7: pipe9 (INT 64byte) |
| * 8 - xx: free (for BULK, ISOC) |
| */ |
| |
| /* |
| * FIXME |
| * |
| * it doesn't have good buffer allocator |
| * |
| * DCP : 256 byte |
| * BULK: 512 byte |
| * INT : 64 byte |
| * ISOC: 512 byte |
| */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_CONTROL)) |
| buff_size = 256; |
| else if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) |
| buff_size = 64; |
| else |
| buff_size = 512; |
| |
| /* change buff_size to register value */ |
| bufnmb_cnt = (buff_size / 64) - 1; |
| |
| /* BUFNMB has been reserved for INT pipe |
| * see above */ |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) { |
| bufnmb = pipe_num - 2; |
| } else { |
| bufnmb = info->bufnmb_last; |
| info->bufnmb_last += bufnmb_cnt + 1; |
| |
| /* |
| * double buffer |
| */ |
| if (is_double) |
| info->bufnmb_last += bufnmb_cnt + 1; |
| } |
| |
| dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", |
| pipe_num, buff_size, bufnmb); |
| |
| return (0x1f & bufnmb_cnt) << 10 | |
| (0xff & bufnmb) << 0; |
| } |
| |
| /* |
| * pipe control |
| */ |
| int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) |
| { |
| u16 mask = usbhsp_is_dcp(pipe) ? DCP_MAXP_MASK : PIPE_MAXP_MASK; |
| |
| usbhsp_pipe_select(pipe); |
| |
| return (int)(usbhsp_pipe_maxp_get(pipe) & mask); |
| } |
| |
| int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) |
| { |
| return usbhsp_flags_has(pipe, IS_DIR_IN); |
| } |
| |
| void usbhs_pipe_clear_sequence(struct usbhs_pipe *pipe) |
| { |
| usbhsp_pipectrl_set(pipe, SQCLR, SQCLR); |
| } |
| |
| static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) |
| { |
| struct usbhs_pipe *pos, *pipe; |
| int i; |
| |
| /* |
| * find target pipe |
| */ |
| pipe = NULL; |
| usbhs_for_each_pipe_with_dcp(pos, priv, i) { |
| if (!usbhsp_type_is(pos, type)) |
| continue; |
| if (usbhsp_flags_has(pos, IS_USED)) |
| continue; |
| |
| pipe = pos; |
| break; |
| } |
| |
| if (!pipe) |
| return NULL; |
| |
| /* |
| * initialize pipe flags |
| */ |
| usbhsp_flags_init(pipe); |
| usbhsp_flags_set(pipe, IS_USED); |
| |
| return pipe; |
| } |
| |
| void usbhs_pipe_init(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv); |
| struct usbhs_pipe *pipe; |
| int i; |
| |
| /* |
| * FIXME |
| * |
| * driver needs good allocator. |
| * |
| * find first free buffer area (BULK, ISOC) |
| * (DCP, INT area is fixed) |
| * |
| * buffer number 0 - 3 have been reserved for DCP |
| * see |
| * usbhsp_to_bufnmb |
| */ |
| info->bufnmb_last = 4; |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| if (usbhsp_type_is(pipe, USB_ENDPOINT_XFER_INT)) |
| info->bufnmb_last++; |
| |
| usbhsp_flags_init(pipe); |
| pipe->mod_private = NULL; |
| |
| usbhsp_fifo_clear(pipe); |
| } |
| } |
| |
| struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct device *dev = usbhs_priv_to_dev(priv); |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| struct usbhs_pipe *pipe; |
| int is_host = usbhs_mod_is_host(priv, mod); |
| int ret; |
| u16 pipecfg, pipebuf, pipemaxp; |
| |
| pipe = usbhsp_get_pipe(priv, usb_endpoint_type(desc)); |
| if (!pipe) { |
| dev_err(dev, "can't get pipe (%s)\n", |
| usbhsp_pipe_name[usb_endpoint_type(desc)]); |
| return NULL; |
| } |
| |
| usbhs_fifo_disable(pipe); |
| |
| /* make sure pipe is not busy */ |
| ret = usbhsp_pipe_barrier(pipe); |
| if (ret < 0) { |
| dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); |
| return NULL; |
| } |
| |
| pipecfg = usbhsp_setup_pipecfg(pipe, desc, is_host); |
| pipebuf = usbhsp_setup_pipebuff(pipe, desc, is_host); |
| pipemaxp = usbhsp_setup_pipemaxp(pipe, desc, is_host); |
| |
| /* buffer clear |
| * see PIPECFG :: BFRE */ |
| usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); |
| usbhsp_pipectrl_set(pipe, ACLRM, 0); |
| |
| usbhsp_pipe_select(pipe); |
| usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); |
| usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); |
| usbhsp_pipe_maxp_set(pipe, 0xFFFF, pipemaxp); |
| |
| usbhs_pipe_clear_sequence(pipe); |
| |
| dev_dbg(dev, "enable pipe %d : %s (%s)\n", |
| usbhs_pipe_number(pipe), |
| usbhsp_pipe_name[usb_endpoint_type(desc)], |
| usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); |
| |
| return pipe; |
| } |
| |
| /* |
| * dcp control |
| */ |
| struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe *pipe; |
| |
| pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); |
| if (!pipe) |
| return NULL; |
| |
| /* |
| * dcpcfg : default |
| * dcpmaxp : default |
| * pipebuf : nothing to do |
| */ |
| |
| usbhsp_pipe_select(pipe); |
| usbhs_pipe_clear_sequence(pipe); |
| |
| return pipe; |
| } |
| |
| void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) |
| { |
| WARN_ON(!usbhsp_is_dcp(pipe)); |
| |
| usbhs_fifo_enable(pipe); |
| usbhsp_pipectrl_set(pipe, CCPL, CCPL); |
| } |
| |
| |
| /* |
| * pipe module function |
| */ |
| int usbhs_pipe_probe(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv); |
| struct usbhs_pipe *pipe; |
| struct device *dev = usbhs_priv_to_dev(priv); |
| u32 *pipe_type = usbhs_get_dparam(priv, pipe_type); |
| int pipe_size = usbhs_get_dparam(priv, pipe_size); |
| int i; |
| |
| /* This driver expects 1st pipe is DCP */ |
| if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) { |
| dev_err(dev, "1st PIPE is not DCP\n"); |
| return -EINVAL; |
| } |
| |
| info->pipe = kzalloc(sizeof(struct usbhs_pipe) * pipe_size, GFP_KERNEL); |
| if (!info->pipe) { |
| dev_err(dev, "Could not allocate pipe\n"); |
| return -ENOMEM; |
| } |
| |
| info->size = pipe_size; |
| |
| /* |
| * init pipe |
| */ |
| usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| pipe->priv = priv; |
| usbhsp_type(pipe) = pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK; |
| |
| dev_dbg(dev, "pipe %x\t: %s\n", |
| i, usbhsp_pipe_name[pipe_type[i]]); |
| } |
| |
| return 0; |
| } |
| |
| void usbhs_pipe_remove(struct usbhs_priv *priv) |
| { |
| struct usbhs_pipe_info *info = usbhsp_priv_to_pipeinfo(priv); |
| |
| kfree(info->pipe); |
| } |