| /* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/iopoll.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/interrupt.h> |
| #include <linux/jiffies.h> |
| #include <linux/workqueue.h> |
| #include <linux/wcnss_wlan.h> |
| #include <linux/of_gpio.h> |
| |
| #include <mach/subsystem_restart.h> |
| #include <mach/msm_smsm.h> |
| #include <mach/ramdump.h> |
| |
| #include "peripheral-loader.h" |
| #include "scm-pas.h" |
| |
| #define PRONTO_PMU_COMMON_GDSCR 0x24 |
| #define PRONTO_PMU_COMMON_GDSCR_SW_COLLAPSE BIT(0) |
| #define CLK_DIS_WAIT 12 |
| #define EN_FEW_WAIT 16 |
| #define EN_REST_WAIT 20 |
| |
| #define PRONTO_PMU_COMMON_CPU_CBCR 0x30 |
| #define PRONTO_PMU_COMMON_CPU_CBCR_CLK_EN BIT(0) |
| #define PRONTO_PMU_COMMON_CPU_CLK_OFF BIT(31) |
| |
| #define PRONTO_PMU_COMMON_AHB_CBCR 0x34 |
| #define PRONTO_PMU_COMMON_AHB_CBCR_CLK_EN BIT(0) |
| #define PRONTO_PMU_COMMON_AHB_CLK_OFF BIT(31) |
| |
| #define PRONTO_PMU_COMMON_CSR 0x1040 |
| #define PRONTO_PMU_COMMON_CSR_A2XB_CFG_EN BIT(0) |
| |
| #define PRONTO_PMU_SOFT_RESET 0x104C |
| #define PRONTO_PMU_SOFT_RESET_CRCM_CCPU_SOFT_RESET BIT(10) |
| |
| #define PRONTO_PMU_CCPU_CTL 0x2000 |
| #define PRONTO_PMU_CCPU_CTL_REMAP_EN BIT(2) |
| #define PRONTO_PMU_CCPU_CTL_HIGH_IVT BIT(0) |
| |
| #define PRONTO_PMU_CCPU_BOOT_REMAP_ADDR 0x2004 |
| |
| #define CLK_CTL_WCNSS_RESTART_BIT BIT(0) |
| |
| #define AXI_HALTREQ 0x0 |
| #define AXI_HALTACK 0x4 |
| #define AXI_IDLE 0x8 |
| |
| #define HALT_ACK_TIMEOUT_US 500000 |
| #define CLK_UPDATE_TIMEOUT_US 500000 |
| |
| struct pronto_data { |
| void __iomem *base; |
| void __iomem *reset_base; |
| void __iomem *axi_halt_base; |
| struct pil_device *pil; |
| struct pil_desc desc; |
| struct subsys_device *subsys; |
| struct subsys_desc subsys_desc; |
| struct clk *cxo; |
| struct regulator *vreg; |
| bool restart_inprogress; |
| bool crash; |
| struct delayed_work cancel_vote_work; |
| int irq; |
| unsigned int err_fatal_irq; |
| int force_stop_gpio; |
| struct ramdump_device *ramdump_dev; |
| }; |
| |
| static int pil_pronto_make_proxy_vote(struct pil_desc *pil) |
| { |
| struct pronto_data *drv = dev_get_drvdata(pil->dev); |
| int ret; |
| |
| ret = regulator_enable(drv->vreg); |
| if (ret) { |
| dev_err(pil->dev, "failed to enable pll supply\n"); |
| goto err; |
| } |
| ret = clk_prepare_enable(drv->cxo); |
| if (ret) { |
| dev_err(pil->dev, "failed to enable cxo\n"); |
| goto err_clk; |
| } |
| return 0; |
| err_clk: |
| regulator_disable(drv->vreg); |
| err: |
| return ret; |
| } |
| |
| static void pil_pronto_remove_proxy_vote(struct pil_desc *pil) |
| { |
| struct pronto_data *drv = dev_get_drvdata(pil->dev); |
| regulator_disable(drv->vreg); |
| clk_disable_unprepare(drv->cxo); |
| } |
| |
| static int pil_pronto_reset(struct pil_desc *pil) |
| { |
| u32 reg; |
| int rc; |
| struct pronto_data *drv = dev_get_drvdata(pil->dev); |
| void __iomem *base = drv->base; |
| phys_addr_t start_addr = pil_get_entry_addr(pil); |
| |
| /* Deassert reset to subsystem and wait for propagation */ |
| reg = readl_relaxed(drv->reset_base); |
| reg &= ~CLK_CTL_WCNSS_RESTART_BIT; |
| writel_relaxed(reg, drv->reset_base); |
| mb(); |
| udelay(2); |
| |
| /* Configure boot address */ |
| writel_relaxed(start_addr >> 16, base + |
| PRONTO_PMU_CCPU_BOOT_REMAP_ADDR); |
| |
| /* Use the high vector table */ |
| reg = readl_relaxed(base + PRONTO_PMU_CCPU_CTL); |
| reg |= PRONTO_PMU_CCPU_CTL_REMAP_EN | PRONTO_PMU_CCPU_CTL_HIGH_IVT; |
| writel_relaxed(reg, base + PRONTO_PMU_CCPU_CTL); |
| |
| /* Turn on AHB clock of common_ss */ |
| reg = readl_relaxed(base + PRONTO_PMU_COMMON_AHB_CBCR); |
| reg |= PRONTO_PMU_COMMON_AHB_CBCR_CLK_EN; |
| writel_relaxed(reg, base + PRONTO_PMU_COMMON_AHB_CBCR); |
| |
| /* Turn on CPU clock of common_ss */ |
| reg = readl_relaxed(base + PRONTO_PMU_COMMON_CPU_CBCR); |
| reg |= PRONTO_PMU_COMMON_CPU_CBCR_CLK_EN; |
| writel_relaxed(reg, base + PRONTO_PMU_COMMON_CPU_CBCR); |
| |
| /* Enable A2XB bridge */ |
| reg = readl_relaxed(base + PRONTO_PMU_COMMON_CSR); |
| reg |= PRONTO_PMU_COMMON_CSR_A2XB_CFG_EN; |
| writel_relaxed(reg, base + PRONTO_PMU_COMMON_CSR); |
| |
| /* Enable common_ss power */ |
| reg = readl_relaxed(base + PRONTO_PMU_COMMON_GDSCR); |
| reg &= ~PRONTO_PMU_COMMON_GDSCR_SW_COLLAPSE; |
| writel_relaxed(reg, base + PRONTO_PMU_COMMON_GDSCR); |
| |
| /* Wait for AHB clock to be on */ |
| rc = readl_tight_poll_timeout(base + PRONTO_PMU_COMMON_AHB_CBCR, |
| reg, |
| !(reg & PRONTO_PMU_COMMON_AHB_CLK_OFF), |
| CLK_UPDATE_TIMEOUT_US); |
| if (rc) { |
| dev_err(pil->dev, "pronto common ahb clk enable timeout\n"); |
| return rc; |
| } |
| |
| /* Wait for CPU clock to be on */ |
| rc = readl_tight_poll_timeout(base + PRONTO_PMU_COMMON_CPU_CBCR, |
| reg, |
| !(reg & PRONTO_PMU_COMMON_CPU_CLK_OFF), |
| CLK_UPDATE_TIMEOUT_US); |
| if (rc) { |
| dev_err(pil->dev, "pronto common cpu clk enable timeout\n"); |
| return rc; |
| } |
| |
| /* Deassert ARM9 software reset */ |
| reg = readl_relaxed(base + PRONTO_PMU_SOFT_RESET); |
| reg &= ~PRONTO_PMU_SOFT_RESET_CRCM_CCPU_SOFT_RESET; |
| writel_relaxed(reg, base + PRONTO_PMU_SOFT_RESET); |
| |
| return 0; |
| } |
| |
| static int pil_pronto_shutdown(struct pil_desc *pil) |
| { |
| struct pronto_data *drv = dev_get_drvdata(pil->dev); |
| int ret; |
| u32 reg, status; |
| |
| /* Halt A2XB */ |
| writel_relaxed(1, drv->axi_halt_base + AXI_HALTREQ); |
| ret = readl_poll_timeout(drv->axi_halt_base + AXI_HALTACK, |
| status, status, 50, HALT_ACK_TIMEOUT_US); |
| if (ret) |
| dev_err(pil->dev, "Port halt timeout\n"); |
| else if (!readl_relaxed(drv->axi_halt_base + AXI_IDLE)) |
| dev_err(pil->dev, "Port halt failed\n"); |
| |
| writel_relaxed(0, drv->axi_halt_base + AXI_HALTREQ); |
| |
| /* Assert reset to Pronto */ |
| reg = readl_relaxed(drv->reset_base); |
| reg |= CLK_CTL_WCNSS_RESTART_BIT; |
| writel_relaxed(reg, drv->reset_base); |
| |
| /* Wait for reset to complete */ |
| mb(); |
| usleep_range(1000, 2000); |
| |
| /* Deassert reset to subsystem and wait for propagation */ |
| reg = readl_relaxed(drv->reset_base); |
| reg &= ~CLK_CTL_WCNSS_RESTART_BIT; |
| writel_relaxed(reg, drv->reset_base); |
| mb(); |
| udelay(2); |
| |
| return 0; |
| } |
| |
| static struct pil_reset_ops pil_pronto_ops = { |
| .auth_and_reset = pil_pronto_reset, |
| .shutdown = pil_pronto_shutdown, |
| .proxy_vote = pil_pronto_make_proxy_vote, |
| .proxy_unvote = pil_pronto_remove_proxy_vote, |
| }; |
| |
| static int pil_pronto_init_image_trusted(struct pil_desc *pil, |
| const u8 *metadata, size_t size) |
| { |
| return pas_init_image(PAS_WCNSS, metadata, size); |
| } |
| |
| static int pil_pronto_mem_setup_trusted(struct pil_desc *pil, phys_addr_t addr, |
| size_t size) |
| { |
| return pas_mem_setup(PAS_WCNSS, addr, size); |
| } |
| |
| static int pil_pronto_reset_trusted(struct pil_desc *pil) |
| { |
| return pas_auth_and_reset(PAS_WCNSS); |
| } |
| |
| static int pil_pronto_shutdown_trusted(struct pil_desc *pil) |
| { |
| return pas_shutdown(PAS_WCNSS); |
| } |
| |
| static struct pil_reset_ops pil_pronto_ops_trusted = { |
| .init_image = pil_pronto_init_image_trusted, |
| .mem_setup = pil_pronto_mem_setup_trusted, |
| .auth_and_reset = pil_pronto_reset_trusted, |
| .shutdown = pil_pronto_shutdown_trusted, |
| .proxy_vote = pil_pronto_make_proxy_vote, |
| .proxy_unvote = pil_pronto_remove_proxy_vote, |
| }; |
| |
| #define subsys_to_drv(d) container_of(d, struct pronto_data, subsys_desc) |
| |
| static int pronto_start(const struct subsys_desc *desc) |
| { |
| struct pronto_data *drv = subsys_to_drv(desc); |
| return pil_boot(&drv->desc); |
| } |
| |
| static void pronto_stop(const struct subsys_desc *desc) |
| { |
| struct pronto_data *drv = subsys_to_drv(desc); |
| pil_shutdown(&drv->desc); |
| } |
| |
| static void log_wcnss_sfr(void) |
| { |
| char *smem_reset_reason; |
| unsigned smem_reset_size; |
| |
| smem_reset_reason = smem_get_entry(SMEM_SSR_REASON_WCNSS0, |
| &smem_reset_size); |
| |
| if (!smem_reset_reason || !smem_reset_size) { |
| pr_err("wcnss subsystem failure reason:\n" |
| "(unknown, smem_get_entry failed)"); |
| } else if (!smem_reset_reason[0]) { |
| pr_err("wcnss subsystem failure reason:\n" |
| "(unknown, init string found)"); |
| } else { |
| pr_err("wcnss subsystem failure reason: %.81s\n", |
| smem_reset_reason); |
| memset(smem_reset_reason, 0, smem_reset_size); |
| wmb(); |
| } |
| } |
| |
| static void restart_wcnss(struct pronto_data *drv) |
| { |
| log_wcnss_sfr(); |
| subsystem_restart_dev(drv->subsys); |
| } |
| |
| static irqreturn_t wcnss_err_fatal_intr_handler(int irq, void *dev_id) |
| { |
| struct pronto_data *drv = dev_id; |
| |
| pr_err("Fatal error on the wcnss.\n"); |
| |
| drv->crash = true; |
| if (drv->restart_inprogress) { |
| pr_err("wcnss: Ignoring error fatal, restart in progress\n"); |
| return IRQ_HANDLED; |
| } |
| |
| drv->restart_inprogress = true; |
| restart_wcnss(drv); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t wcnss_wdog_bite_irq_hdlr(int irq, void *dev_id) |
| { |
| struct pronto_data *drv = dev_id; |
| |
| drv->crash = true; |
| |
| if (drv->restart_inprogress) { |
| pr_err("Ignoring wcnss bite irq, restart in progress\n"); |
| return IRQ_HANDLED; |
| } |
| |
| disable_irq_nosync(drv->irq); |
| drv->restart_inprogress = true; |
| restart_wcnss(drv); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void wcnss_post_bootup(struct work_struct *work) |
| { |
| struct platform_device *pdev = wcnss_get_platform_device(); |
| struct wcnss_wlan_config *pwlanconfig = wcnss_get_wlan_config(); |
| |
| wcnss_wlan_power(&pdev->dev, pwlanconfig, WCNSS_WLAN_SWITCH_OFF); |
| } |
| |
| static int wcnss_shutdown(const struct subsys_desc *subsys) |
| { |
| struct pronto_data *drv = subsys_to_drv(subsys); |
| |
| pil_shutdown(&drv->desc); |
| flush_delayed_work(&drv->cancel_vote_work); |
| wcnss_flush_delayed_boot_votes(); |
| |
| return 0; |
| } |
| |
| static int wcnss_powerup(const struct subsys_desc *subsys) |
| { |
| struct pronto_data *drv = subsys_to_drv(subsys); |
| struct platform_device *pdev = wcnss_get_platform_device(); |
| struct wcnss_wlan_config *pwlanconfig = wcnss_get_wlan_config(); |
| int ret = -1; |
| |
| if (pdev && pwlanconfig) |
| ret = wcnss_wlan_power(&pdev->dev, pwlanconfig, |
| WCNSS_WLAN_SWITCH_ON); |
| if (!ret) { |
| msleep(1000); |
| ret = pil_boot(&drv->desc); |
| if (ret) |
| return ret; |
| } |
| drv->restart_inprogress = false; |
| enable_irq(drv->irq); |
| schedule_delayed_work(&drv->cancel_vote_work, msecs_to_jiffies(5000)); |
| |
| return 0; |
| } |
| |
| static void crash_shutdown(const struct subsys_desc *subsys) |
| { |
| struct pronto_data *drv = subsys_to_drv(subsys); |
| |
| pr_err("wcnss crash shutdown %d\n", drv->crash); |
| if (!drv->crash) |
| gpio_set_value(drv->force_stop_gpio, 1); |
| } |
| |
| static int wcnss_ramdump(int enable, const struct subsys_desc *subsys) |
| { |
| struct pronto_data *drv = subsys_to_drv(subsys); |
| |
| if (!enable) |
| return 0; |
| |
| return pil_do_ramdump(&drv->desc, drv->ramdump_dev); |
| } |
| |
| static int __devinit pil_pronto_probe(struct platform_device *pdev) |
| { |
| struct pronto_data *drv; |
| struct resource *res; |
| struct pil_desc *desc; |
| int ret, err_fatal_gpio, irq; |
| uint32_t regval; |
| |
| int clk_ready = of_get_named_gpio(pdev->dev.of_node, |
| "qcom,gpio-proxy-unvote", 0); |
| if (clk_ready < 0) |
| return clk_ready; |
| |
| clk_ready = gpio_to_irq(clk_ready); |
| if (clk_ready < 0) |
| return clk_ready; |
| |
| drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); |
| if (!drv) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, drv); |
| |
| drv->irq = platform_get_irq(pdev, 0); |
| if (drv->irq < 0) |
| return drv->irq; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pmu_base"); |
| drv->base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->base) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "clk_base"); |
| drv->reset_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->reset_base) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "halt_base"); |
| drv->axi_halt_base = devm_request_and_ioremap(&pdev->dev, res); |
| if (!drv->axi_halt_base) |
| return -ENOMEM; |
| |
| desc = &drv->desc; |
| ret = of_property_read_string(pdev->dev.of_node, "qcom,firmware-name", |
| &desc->name); |
| if (ret) |
| return ret; |
| |
| err_fatal_gpio = of_get_named_gpio(pdev->dev.of_node, |
| "qcom,gpio-err-fatal", 0); |
| if (err_fatal_gpio < 0) |
| return err_fatal_gpio; |
| |
| irq = gpio_to_irq(err_fatal_gpio); |
| if (irq < 0) |
| return irq; |
| |
| drv->err_fatal_irq = irq; |
| |
| drv->force_stop_gpio = of_get_named_gpio(pdev->dev.of_node, |
| "qcom,gpio-force-stop", 0); |
| if (drv->force_stop_gpio < 0) |
| return drv->force_stop_gpio; |
| |
| |
| desc->dev = &pdev->dev; |
| desc->owner = THIS_MODULE; |
| desc->proxy_timeout = 10000; |
| desc->proxy_unvote_irq = clk_ready; |
| |
| if (pas_supported(PAS_WCNSS) > 0) { |
| desc->ops = &pil_pronto_ops_trusted; |
| dev_info(&pdev->dev, "using secure boot\n"); |
| } else { |
| desc->ops = &pil_pronto_ops; |
| dev_info(&pdev->dev, "using non-secure boot\n"); |
| } |
| |
| drv->vreg = devm_regulator_get(&pdev->dev, "vdd_pronto_pll"); |
| if (IS_ERR(drv->vreg)) { |
| dev_err(&pdev->dev, "failed to get pronto pll supply"); |
| return PTR_ERR(drv->vreg); |
| } |
| |
| ret = regulator_set_voltage(drv->vreg, 1800000, 1800000); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to set pll supply voltage\n"); |
| return ret; |
| } |
| |
| ret = regulator_set_optimum_mode(drv->vreg, 18000); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to set pll supply mode\n"); |
| return ret; |
| } |
| |
| drv->cxo = devm_clk_get(&pdev->dev, "xo"); |
| if (IS_ERR(drv->cxo)) |
| return PTR_ERR(drv->cxo); |
| |
| ret = pil_desc_init(desc); |
| if (ret) |
| return ret; |
| |
| drv->subsys_desc.name = desc->name; |
| drv->subsys_desc.dev = &pdev->dev; |
| drv->subsys_desc.owner = THIS_MODULE; |
| drv->subsys_desc.shutdown = wcnss_shutdown; |
| drv->subsys_desc.powerup = wcnss_powerup; |
| drv->subsys_desc.ramdump = wcnss_ramdump; |
| drv->subsys_desc.crash_shutdown = crash_shutdown; |
| drv->subsys_desc.start = pronto_start; |
| drv->subsys_desc.stop = pronto_stop; |
| |
| ret = of_get_named_gpio(pdev->dev.of_node, |
| "qcom,gpio-err-ready", 0); |
| if (ret < 0) |
| return ret; |
| |
| ret = gpio_to_irq(ret); |
| if (ret < 0) |
| return ret; |
| |
| drv->subsys_desc.err_ready_irq = ret; |
| |
| INIT_DELAYED_WORK(&drv->cancel_vote_work, wcnss_post_bootup); |
| |
| drv->subsys = subsys_register(&drv->subsys_desc); |
| if (IS_ERR(drv->subsys)) { |
| ret = PTR_ERR(drv->subsys); |
| goto err_subsys; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, drv->irq, wcnss_wdog_bite_irq_hdlr, |
| IRQF_TRIGGER_HIGH, "wcnss_wdog", drv); |
| if (ret < 0) |
| goto err_irq; |
| |
| ret = devm_request_irq(&pdev->dev, drv->err_fatal_irq, |
| wcnss_err_fatal_intr_handler, |
| IRQF_TRIGGER_RISING, "pil-pronto", drv); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Unable to register SMP2P err fatal handler!\n"); |
| goto err_irq; |
| } |
| |
| drv->ramdump_dev = create_ramdump_device("pronto", &pdev->dev); |
| if (!drv->ramdump_dev) { |
| ret = -ENOMEM; |
| goto err_irq; |
| } |
| |
| /* Initialize common_ss GDSCR to wait 4 cycles between states */ |
| regval = readl_relaxed(drv->base + PRONTO_PMU_COMMON_GDSCR) |
| & PRONTO_PMU_COMMON_GDSCR_SW_COLLAPSE; |
| regval |= (2 << EN_REST_WAIT) | (2 << EN_FEW_WAIT) |
| | (2 << CLK_DIS_WAIT); |
| writel_relaxed(regval, drv->base + PRONTO_PMU_COMMON_GDSCR); |
| |
| return 0; |
| |
| err_irq: |
| subsys_unregister(drv->subsys); |
| err_subsys: |
| pil_desc_release(desc); |
| return ret; |
| } |
| |
| static int __devexit pil_pronto_remove(struct platform_device *pdev) |
| { |
| struct pronto_data *drv = platform_get_drvdata(pdev); |
| subsys_unregister(drv->subsys); |
| pil_desc_release(&drv->desc); |
| destroy_ramdump_device(drv->ramdump_dev); |
| return 0; |
| } |
| |
| static struct of_device_id msm_pil_pronto_match[] = { |
| {.compatible = "qcom,pil-pronto"}, |
| {} |
| }; |
| |
| static struct platform_driver pil_pronto_driver = { |
| .probe = pil_pronto_probe, |
| .remove = __devexit_p(pil_pronto_remove), |
| .driver = { |
| .name = "pil_pronto", |
| .owner = THIS_MODULE, |
| .of_match_table = msm_pil_pronto_match, |
| }, |
| }; |
| |
| static int __init pil_pronto_init(void) |
| { |
| return platform_driver_register(&pil_pronto_driver); |
| } |
| module_init(pil_pronto_init); |
| |
| static void __exit pil_pronto_exit(void) |
| { |
| platform_driver_unregister(&pil_pronto_driver); |
| } |
| module_exit(pil_pronto_exit); |
| |
| MODULE_DESCRIPTION("Support for booting PRONTO (WCNSS) processors"); |
| MODULE_LICENSE("GPL v2"); |