| |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/minix_fs.h> |
| #include <linux/ext2_fs.h> |
| #include <linux/romfs_fs.h> |
| #include <linux/cramfs_fs.h> |
| #include <linux/initrd.h> |
| #include <linux/string.h> |
| |
| #include "do_mounts.h" |
| |
| #define BUILD_CRAMDISK |
| |
| int __initdata rd_prompt = 1;/* 1 = prompt for RAM disk, 0 = don't prompt */ |
| |
| static int __init prompt_ramdisk(char *str) |
| { |
| rd_prompt = simple_strtol(str,NULL,0) & 1; |
| return 1; |
| } |
| __setup("prompt_ramdisk=", prompt_ramdisk); |
| |
| int __initdata rd_image_start; /* starting block # of image */ |
| |
| static int __init ramdisk_start_setup(char *str) |
| { |
| rd_image_start = simple_strtol(str,NULL,0); |
| return 1; |
| } |
| __setup("ramdisk_start=", ramdisk_start_setup); |
| |
| static int __init crd_load(int in_fd, int out_fd); |
| |
| /* |
| * This routine tries to find a RAM disk image to load, and returns the |
| * number of blocks to read for a non-compressed image, 0 if the image |
| * is a compressed image, and -1 if an image with the right magic |
| * numbers could not be found. |
| * |
| * We currently check for the following magic numbers: |
| * minix |
| * ext2 |
| * romfs |
| * cramfs |
| * gzip |
| */ |
| static int __init |
| identify_ramdisk_image(int fd, int start_block) |
| { |
| const int size = 512; |
| struct minix_super_block *minixsb; |
| struct ext2_super_block *ext2sb; |
| struct romfs_super_block *romfsb; |
| struct cramfs_super *cramfsb; |
| int nblocks = -1; |
| unsigned char *buf; |
| |
| buf = kmalloc(size, GFP_KERNEL); |
| if (buf == 0) |
| return -1; |
| |
| minixsb = (struct minix_super_block *) buf; |
| ext2sb = (struct ext2_super_block *) buf; |
| romfsb = (struct romfs_super_block *) buf; |
| cramfsb = (struct cramfs_super *) buf; |
| memset(buf, 0xe5, size); |
| |
| /* |
| * Read block 0 to test for gzipped kernel |
| */ |
| sys_lseek(fd, start_block * BLOCK_SIZE, 0); |
| sys_read(fd, buf, size); |
| |
| /* |
| * If it matches the gzip magic numbers, return -1 |
| */ |
| if (buf[0] == 037 && ((buf[1] == 0213) || (buf[1] == 0236))) { |
| printk(KERN_NOTICE |
| "RAMDISK: Compressed image found at block %d\n", |
| start_block); |
| nblocks = 0; |
| goto done; |
| } |
| |
| /* romfs is at block zero too */ |
| if (romfsb->word0 == ROMSB_WORD0 && |
| romfsb->word1 == ROMSB_WORD1) { |
| printk(KERN_NOTICE |
| "RAMDISK: romfs filesystem found at block %d\n", |
| start_block); |
| nblocks = (ntohl(romfsb->size)+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS; |
| goto done; |
| } |
| |
| if (cramfsb->magic == CRAMFS_MAGIC) { |
| printk(KERN_NOTICE |
| "RAMDISK: cramfs filesystem found at block %d\n", |
| start_block); |
| nblocks = (cramfsb->size + BLOCK_SIZE - 1) >> BLOCK_SIZE_BITS; |
| goto done; |
| } |
| |
| /* |
| * Read block 1 to test for minix and ext2 superblock |
| */ |
| sys_lseek(fd, (start_block+1) * BLOCK_SIZE, 0); |
| sys_read(fd, buf, size); |
| |
| /* Try minix */ |
| if (minixsb->s_magic == MINIX_SUPER_MAGIC || |
| minixsb->s_magic == MINIX_SUPER_MAGIC2) { |
| printk(KERN_NOTICE |
| "RAMDISK: Minix filesystem found at block %d\n", |
| start_block); |
| nblocks = minixsb->s_nzones << minixsb->s_log_zone_size; |
| goto done; |
| } |
| |
| /* Try ext2 */ |
| if (ext2sb->s_magic == cpu_to_le16(EXT2_SUPER_MAGIC)) { |
| printk(KERN_NOTICE |
| "RAMDISK: ext2 filesystem found at block %d\n", |
| start_block); |
| nblocks = le32_to_cpu(ext2sb->s_blocks_count) << |
| le32_to_cpu(ext2sb->s_log_block_size); |
| goto done; |
| } |
| |
| printk(KERN_NOTICE |
| "RAMDISK: Couldn't find valid RAM disk image starting at %d.\n", |
| start_block); |
| |
| done: |
| sys_lseek(fd, start_block * BLOCK_SIZE, 0); |
| kfree(buf); |
| return nblocks; |
| } |
| |
| int __init rd_load_image(char *from) |
| { |
| int res = 0; |
| int in_fd, out_fd; |
| unsigned long rd_blocks, devblocks; |
| int nblocks, i, disk; |
| char *buf = NULL; |
| unsigned short rotate = 0; |
| #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) |
| char rotator[4] = { '|' , '/' , '-' , '\\' }; |
| #endif |
| |
| out_fd = sys_open("/dev/ram", O_RDWR, 0); |
| if (out_fd < 0) |
| goto out; |
| |
| in_fd = sys_open(from, O_RDONLY, 0); |
| if (in_fd < 0) |
| goto noclose_input; |
| |
| nblocks = identify_ramdisk_image(in_fd, rd_image_start); |
| if (nblocks < 0) |
| goto done; |
| |
| if (nblocks == 0) { |
| #ifdef BUILD_CRAMDISK |
| if (crd_load(in_fd, out_fd) == 0) |
| goto successful_load; |
| #else |
| printk(KERN_NOTICE |
| "RAMDISK: Kernel does not support compressed " |
| "RAM disk images\n"); |
| #endif |
| goto done; |
| } |
| |
| /* |
| * NOTE NOTE: nblocks is not actually blocks but |
| * the number of kibibytes of data to load into a ramdisk. |
| * So any ramdisk block size that is a multiple of 1KiB should |
| * work when the appropriate ramdisk_blocksize is specified |
| * on the command line. |
| * |
| * The default ramdisk_blocksize is 1KiB and it is generally |
| * silly to use anything else, so make sure to use 1KiB |
| * blocksize while generating ext2fs ramdisk-images. |
| */ |
| if (sys_ioctl(out_fd, BLKGETSIZE, (unsigned long)&rd_blocks) < 0) |
| rd_blocks = 0; |
| else |
| rd_blocks >>= 1; |
| |
| if (nblocks > rd_blocks) { |
| printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n", |
| nblocks, rd_blocks); |
| goto done; |
| } |
| |
| /* |
| * OK, time to copy in the data |
| */ |
| if (sys_ioctl(in_fd, BLKGETSIZE, (unsigned long)&devblocks) < 0) |
| devblocks = 0; |
| else |
| devblocks >>= 1; |
| |
| if (strcmp(from, "/initrd.image") == 0) |
| devblocks = nblocks; |
| |
| if (devblocks == 0) { |
| printk(KERN_ERR "RAMDISK: could not determine device size\n"); |
| goto done; |
| } |
| |
| buf = kmalloc(BLOCK_SIZE, GFP_KERNEL); |
| if (buf == 0) { |
| printk(KERN_ERR "RAMDISK: could not allocate buffer\n"); |
| goto done; |
| } |
| |
| printk(KERN_NOTICE "RAMDISK: Loading %dKiB [%ld disk%s] into ram disk... ", |
| nblocks, ((nblocks-1)/devblocks)+1, nblocks>devblocks ? "s" : ""); |
| for (i = 0, disk = 1; i < nblocks; i++) { |
| if (i && (i % devblocks == 0)) { |
| printk("done disk #%d.\n", disk++); |
| rotate = 0; |
| if (sys_close(in_fd)) { |
| printk("Error closing the disk.\n"); |
| goto noclose_input; |
| } |
| change_floppy("disk #%d", disk); |
| in_fd = sys_open(from, O_RDONLY, 0); |
| if (in_fd < 0) { |
| printk("Error opening disk.\n"); |
| goto noclose_input; |
| } |
| printk("Loading disk #%d... ", disk); |
| } |
| sys_read(in_fd, buf, BLOCK_SIZE); |
| sys_write(out_fd, buf, BLOCK_SIZE); |
| #if !defined(CONFIG_S390) && !defined(CONFIG_PPC_ISERIES) |
| if (!(i % 16)) { |
| printk("%c\b", rotator[rotate & 0x3]); |
| rotate++; |
| } |
| #endif |
| } |
| printk("done.\n"); |
| |
| successful_load: |
| res = 1; |
| done: |
| sys_close(in_fd); |
| noclose_input: |
| sys_close(out_fd); |
| out: |
| kfree(buf); |
| sys_unlink("/dev/ram"); |
| return res; |
| } |
| |
| int __init rd_load_disk(int n) |
| { |
| if (rd_prompt) |
| change_floppy("root floppy disk to be loaded into RAM disk"); |
| create_dev("/dev/root", ROOT_DEV, root_device_name); |
| create_dev("/dev/ram", MKDEV(RAMDISK_MAJOR, n), NULL); |
| return rd_load_image("/dev/root"); |
| } |
| |
| #ifdef BUILD_CRAMDISK |
| |
| /* |
| * gzip declarations |
| */ |
| |
| #define OF(args) args |
| |
| #ifndef memzero |
| #define memzero(s, n) memset ((s), 0, (n)) |
| #endif |
| |
| typedef unsigned char uch; |
| typedef unsigned short ush; |
| typedef unsigned long ulg; |
| |
| #define INBUFSIZ 4096 |
| #define WSIZE 0x8000 /* window size--must be a power of two, and */ |
| /* at least 32K for zip's deflate method */ |
| |
| static uch *inbuf; |
| static uch *window; |
| |
| static unsigned insize; /* valid bytes in inbuf */ |
| static unsigned inptr; /* index of next byte to be processed in inbuf */ |
| static unsigned outcnt; /* bytes in output buffer */ |
| static int exit_code; |
| static int unzip_error; |
| static long bytes_out; |
| static int crd_infd, crd_outfd; |
| |
| #define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) |
| |
| /* Diagnostic functions (stubbed out) */ |
| #define Assert(cond,msg) |
| #define Trace(x) |
| #define Tracev(x) |
| #define Tracevv(x) |
| #define Tracec(c,x) |
| #define Tracecv(c,x) |
| |
| #define STATIC static |
| #define INIT __init |
| |
| static int __init fill_inbuf(void); |
| static void __init flush_window(void); |
| static void __init *malloc(size_t size); |
| static void __init free(void *where); |
| static void __init error(char *m); |
| static void __init gzip_mark(void **); |
| static void __init gzip_release(void **); |
| |
| #include "../lib/inflate.c" |
| |
| static void __init *malloc(size_t size) |
| { |
| return kmalloc(size, GFP_KERNEL); |
| } |
| |
| static void __init free(void *where) |
| { |
| kfree(where); |
| } |
| |
| static void __init gzip_mark(void **ptr) |
| { |
| } |
| |
| static void __init gzip_release(void **ptr) |
| { |
| } |
| |
| |
| /* =========================================================================== |
| * Fill the input buffer. This is called only when the buffer is empty |
| * and at least one byte is really needed. |
| * Returning -1 does not guarantee that gunzip() will ever return. |
| */ |
| static int __init fill_inbuf(void) |
| { |
| if (exit_code) return -1; |
| |
| insize = sys_read(crd_infd, inbuf, INBUFSIZ); |
| if (insize == 0) { |
| error("RAMDISK: ran out of compressed data"); |
| return -1; |
| } |
| |
| inptr = 1; |
| |
| return inbuf[0]; |
| } |
| |
| /* =========================================================================== |
| * Write the output window window[0..outcnt-1] and update crc and bytes_out. |
| * (Used for the decompressed data only.) |
| */ |
| static void __init flush_window(void) |
| { |
| ulg c = crc; /* temporary variable */ |
| unsigned n, written; |
| uch *in, ch; |
| |
| written = sys_write(crd_outfd, window, outcnt); |
| if (written != outcnt && unzip_error == 0) { |
| printk(KERN_ERR "RAMDISK: incomplete write (%d != %d) %ld\n", |
| written, outcnt, bytes_out); |
| unzip_error = 1; |
| } |
| in = window; |
| for (n = 0; n < outcnt; n++) { |
| ch = *in++; |
| c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); |
| } |
| crc = c; |
| bytes_out += (ulg)outcnt; |
| outcnt = 0; |
| } |
| |
| static void __init error(char *x) |
| { |
| printk(KERN_ERR "%s\n", x); |
| exit_code = 1; |
| unzip_error = 1; |
| } |
| |
| static int __init crd_load(int in_fd, int out_fd) |
| { |
| int result; |
| |
| insize = 0; /* valid bytes in inbuf */ |
| inptr = 0; /* index of next byte to be processed in inbuf */ |
| outcnt = 0; /* bytes in output buffer */ |
| exit_code = 0; |
| bytes_out = 0; |
| crc = (ulg)0xffffffffL; /* shift register contents */ |
| |
| crd_infd = in_fd; |
| crd_outfd = out_fd; |
| inbuf = kmalloc(INBUFSIZ, GFP_KERNEL); |
| if (inbuf == 0) { |
| printk(KERN_ERR "RAMDISK: Couldn't allocate gzip buffer\n"); |
| return -1; |
| } |
| window = kmalloc(WSIZE, GFP_KERNEL); |
| if (window == 0) { |
| printk(KERN_ERR "RAMDISK: Couldn't allocate gzip window\n"); |
| kfree(inbuf); |
| return -1; |
| } |
| makecrc(); |
| result = gunzip(); |
| if (unzip_error) |
| result = 1; |
| kfree(inbuf); |
| kfree(window); |
| return result; |
| } |
| |
| #endif /* BUILD_CRAMDISK */ |