arch/arm/mach-msm/scm.c

/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/slab.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/init.h>

#include <asm/cacheflush.h>

#include <mach/scm.h>

#define SCM_ENOMEM		-5
#define SCM_EOPNOTSUPP		-4
#define SCM_EINVAL_ADDR		-3
#define SCM_EINVAL_ARG		-2
#define SCM_ERROR		-1
#define SCM_INTERRUPTED		1

static DEFINE_MUTEX(scm_lock);

/**
 * struct scm_command - one SCM command buffer
 * @len: total available memory for command and response
 * @buf_offset: start of command buffer
 * @resp_hdr_offset: start of response buffer
 * @id: command to be executed
 * @buf: buffer returned from scm_get_command_buffer()
 *
 * An SCM command is laid out in memory as follows:
 *
 *	------------------- <--- struct scm_command
 *	| command header  |
 *	------------------- <--- scm_get_command_buffer()
 *	| command buffer  |
 *	------------------- <--- struct scm_response and
 *	| response header |      scm_command_to_response()
 *	------------------- <--- scm_get_response_buffer()
 *	| response buffer |
 *	-------------------
 *
 * There can be arbitrary padding between the headers and buffers so
 * you should always use the appropriate scm_get_*_buffer() routines
 * to access the buffers in a safe manner.
 */
struct scm_command {
	u32	len;
	u32	buf_offset;
	u32	resp_hdr_offset;
	u32	id;
	u32	buf[0];
};

/**
 * struct scm_response - one SCM response buffer
 * @len: total available memory for response
 * @buf_offset: start of response data relative to start of scm_response
 * @is_complete: indicates if the command has finished processing
 */
struct scm_response {
	u32	len;
	u32	buf_offset;
	u32	is_complete;
};

/**
 * alloc_scm_command() - Allocate an SCM command
 * @cmd_size: size of the command buffer
 * @resp_size: size of the response buffer
 *
 * Allocate an SCM command, including enough room for the command
 * and response headers as well as the command and response buffers.
 *
 * Returns a valid &scm_command on success or %NULL if the allocation fails.
 */
static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
{
	struct scm_command *cmd;
	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
		resp_size;

	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
	if (cmd) {
		cmd->len = len;
		cmd->buf_offset = offsetof(struct scm_command, buf);
		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
	}
	return cmd;
}

/**
 * free_scm_command() - Free an SCM command
 * @cmd: command to free
 *
 * Free an SCM command.
 */
static inline void free_scm_command(struct scm_command *cmd)
{
	kfree(cmd);
}

/**
 * scm_command_to_response() - Get a pointer to a scm_response
 * @cmd: command
 *
 * Returns a pointer to a response for a command.
 */
static inline struct scm_response *scm_command_to_response(
		const struct scm_command *cmd)
{
	return (void *)cmd + cmd->resp_hdr_offset;
}

/**
 * scm_get_command_buffer() - Get a pointer to a command buffer
 * @cmd: command
 *
 * Returns a pointer to the command buffer of a command.
 */
static inline void *scm_get_command_buffer(const struct scm_command *cmd)
{
	return (void *)cmd->buf;
}

/**
 * scm_get_response_buffer() - Get a pointer to a response buffer
 * @rsp: response
 *
 * Returns a pointer to a response buffer of a response.
 */
static inline void *scm_get_response_buffer(const struct scm_response *rsp)
{
	return (void *)rsp + rsp->buf_offset;
}

static int scm_remap_error(int err)
{
	switch (err) {
	case SCM_ERROR:
		return -EIO;
	case SCM_EINVAL_ADDR:
	case SCM_EINVAL_ARG:
		return -EINVAL;
	case SCM_EOPNOTSUPP:
		return -EOPNOTSUPP;
	case SCM_ENOMEM:
		return -ENOMEM;
	}
	return -EINVAL;
}

static u32 smc(u32 cmd_addr)
{
	int context_id;
	register u32 r0 asm("r0") = 1;
	register u32 r1 asm("r1") = (u32)&context_id;
	register u32 r2 asm("r2") = cmd_addr;
	do {
		asm volatile(
			__asmeq("%0", "r0")
			__asmeq("%1", "r0")
			__asmeq("%2", "r1")
			__asmeq("%3", "r2")
			"smc	#0	@ switch to secure world\n"
			: "=r" (r0)
			: "r" (r0), "r" (r1), "r" (r2)
			: "r3");
	} while (r0 == SCM_INTERRUPTED);

	return r0;
}

static int __scm_call(const struct scm_command *cmd)
{
	int ret;
	u32 cmd_addr = virt_to_phys(cmd);

	/*
	 * Flush the entire cache here so callers don't have to remember
	 * to flush the cache when passing physical addresses to the secure
	 * side in the buffer.
	 */
	flush_cache_all();
	ret = smc(cmd_addr);
	if (ret < 0)
		ret = scm_remap_error(ret);

	return ret;
}

static u32 cacheline_size;

static void scm_inv_range(unsigned long start, unsigned long end)
{
	start = round_down(start, cacheline_size);
	end = round_up(end, cacheline_size);
	while (start < end) {
		asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
		     : "memory");
		start += cacheline_size;
	}
	dsb();
	isb();
}

/**
 * scm_call() - Send an SCM command
 * @svc_id: service identifier
 * @cmd_id: command identifier
 * @cmd_buf: command buffer
 * @cmd_len: length of the command buffer
 * @resp_buf: response buffer
 * @resp_len: length of the response buffer
 *
 * Sends a command to the SCM and waits for the command to finish processing.
 */
int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
		void *resp_buf, size_t resp_len)
{
	int ret;
	struct scm_command *cmd;
	struct scm_response *rsp;
	unsigned long start, end;

	cmd = alloc_scm_command(cmd_len, resp_len);
	if (!cmd)
		return -ENOMEM;

	cmd->id = (svc_id << 10) | cmd_id;
	if (cmd_buf)
		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);

	mutex_lock(&scm_lock);
	ret = __scm_call(cmd);
	mutex_unlock(&scm_lock);
	if (ret)
		goto out;

	rsp = scm_command_to_response(cmd);
	start = (unsigned long)rsp;

	do {
		scm_inv_range(start, start + sizeof(*rsp));
	} while (!rsp->is_complete);

	end = (unsigned long)scm_get_response_buffer(rsp) + resp_len;
	scm_inv_range(start, end);

	if (resp_buf)
		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
out:
	free_scm_command(cmd);
	return ret;
}
EXPORT_SYMBOL(scm_call);

#define SCM_CLASS_REGISTER	(0x2 << 8)
#define SCM_MASK_IRQS		BIT(5)
#define SCM_ATOMIC(svc, cmd, n) (((((svc) << 10)|((cmd) & 0x3ff)) << 12) | \
				SCM_CLASS_REGISTER | \
				SCM_MASK_IRQS | \
				(n & 0xf))

/**
 * scm_call_atomic1() - Send an atomic SCM command with one argument
 * @svc_id: service identifier
 * @cmd_id: command identifier
 * @arg1: first argument
 *
 * This shall only be used with commands that are guaranteed to be
 * uninterruptable, atomic and SMP safe.
 */
u32 scm_call_atomic1(u32 svc, u32 cmd, u32 arg1)
{
	int context_id;
	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 1);
	register u32 r1 asm("r1") = (u32)&context_id;
	register u32 r2 asm("r2") = arg1;

	asm volatile(
		__asmeq("%0", "r0")
		__asmeq("%1", "r0")
		__asmeq("%2", "r1")
		__asmeq("%3", "r2")
		"smc	#0	@ switch to secure world\n"
		: "=r" (r0)
		: "r" (r0), "r" (r1), "r" (r2)
		: "r3");
	return r0;
}
EXPORT_SYMBOL(scm_call_atomic1);

/**
 * scm_call_atomic2() - Send an atomic SCM command with two arguments
 * @svc_id: service identifier
 * @cmd_id: command identifier
 * @arg1: first argument
 * @arg2: second argument
 *
 * This shall only be used with commands that are guaranteed to be
 * uninterruptable, atomic and SMP safe.
 */
u32 scm_call_atomic2(u32 svc, u32 cmd, u32 arg1, u32 arg2)
{
	int context_id;
	register u32 r0 asm("r0") = SCM_ATOMIC(svc, cmd, 2);
	register u32 r1 asm("r1") = (u32)&context_id;
	register u32 r2 asm("r2") = arg1;
	register u32 r3 asm("r3") = arg2;

	asm volatile(
		__asmeq("%0", "r0")
		__asmeq("%1", "r0")
		__asmeq("%2", "r1")
		__asmeq("%3", "r2")
		__asmeq("%4", "r3")
		"smc	#0	@ switch to secure world\n"
		: "=r" (r0)
		: "r" (r0), "r" (r1), "r" (r2), "r" (r3));
	return r0;
}
EXPORT_SYMBOL(scm_call_atomic2);

u32 scm_get_version(void)
{
	int context_id;
	static u32 version = -1;
	register u32 r0 asm("r0");
	register u32 r1 asm("r1");

	if (version != -1)
		return version;

	mutex_lock(&scm_lock);

	r0 = 0x1 << 8;
	r1 = (u32)&context_id;
	do {
		asm volatile(
			__asmeq("%0", "r0")
			__asmeq("%1", "r1")
			__asmeq("%2", "r0")
			__asmeq("%3", "r1")
			"smc	#0	@ switch to secure world\n"
			: "=r" (r0), "=r" (r1)
			: "r" (r0), "r" (r1)
			: "r2", "r3");
	} while (r0 == SCM_INTERRUPTED);

	version = r1;
	mutex_unlock(&scm_lock);

	return version;
}
EXPORT_SYMBOL(scm_get_version);

#define IS_CALL_AVAIL_CMD	1
int scm_is_call_available(u32 svc_id, u32 cmd_id)
{
	int ret;
	u32 svc_cmd = (svc_id << 10) | cmd_id;
	u32 ret_val = 0;

	ret = scm_call(SCM_SVC_INFO, IS_CALL_AVAIL_CMD, &svc_cmd,
			sizeof(svc_cmd), &ret_val, sizeof(ret_val));
	if (ret)
		return ret;

	return ret_val;
}
EXPORT_SYMBOL(scm_is_call_available);

static int scm_init(void)
{
	u32 ctr;

	asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr));
	cacheline_size =  4 << ((ctr >> 16) & 0xf);

	return 0;
}
early_initcall(scm_init);