| /* Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /include/ "skeleton.dtsi" |
| /include/ "msm9625-ion.dtsi" |
| /include/ "msm9625-pm.dtsi" |
| /include/ "msm9625-coresight.dtsi" |
| |
| / { |
| model = "Qualcomm MSM 9625"; |
| compatible = "qcom,msm9625"; |
| interrupt-parent = <&intc>; |
| |
| intc: interrupt-controller@F9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xF9000000 0x1000>, |
| <0xF9002000 0x1000>; |
| }; |
| |
| l2: cache-controller@f9040000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0xf9040000 0x1000>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| msmgpio: gpio@fd510000 { |
| compatible = "qcom,msm-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| reg = <0xfd510000 0x4000>; |
| interrupts = <0 208 0>; |
| }; |
| |
| timer: msm-qtimer@f9021000 { |
| compatible = "arm,armv7-timer"; |
| reg = <0xF9021000 0x1000>; |
| interrupts = <0 7 0>; |
| irq-is-not-percpu; |
| clock-frequency = <19200000>; |
| }; |
| |
| qcom,sps@f9980000 { |
| compatible = "qcom,msm_sps"; |
| reg = <0xf9984000 0x15000>, |
| <0xf9999000 0xb000>, |
| <0xfe803000 0x4800>; |
| interrupts = <0 94 0>; |
| qcom,device-type = <2>; |
| }; |
| |
| serial@f991f000 { |
| compatible = "qcom,msm-lsuart-v14"; |
| reg = <0xf991f000 0x1000>; |
| interrupts = <0 109 0>; |
| }; |
| |
| usb@f9a55000 { |
| compatible = "qcom,hsusb-otg"; |
| reg = <0xf9a55000 0x400>; |
| interrupts = <0 134 0 0 140 0>; |
| interrupt-names = "core_irq", "async_irq"; |
| HSUSB_VDDCX-supply = <&pm8019_l12>; |
| HSUSB_1p8-supply = <&pm8019_l2>; |
| HSUSB_3p3-supply = <&pm8019_l4>; |
| vbus_otg-supply = <&usb_vbus>; |
| |
| qcom,hsusb-otg-phy-type = <2>; |
| qcom,hsusb-otg-mode = <1>; |
| qcom,hsusb-otg-otg-control = <1>; |
| qcom,hsusb-otg-disable-reset; |
| }; |
| |
| android_usb@fc42b0c8 { |
| compatible = "qcom,android-usb"; |
| reg = <0xfc42b0c8 0xc8>; |
| }; |
| |
| hsic@f9a15000 { |
| compatible = "qcom,hsic-host"; |
| reg = <0xf9a15000 0x400>; |
| interrupts = <0 136 0>; |
| interrupt-names = "core_irq"; |
| HSIC_VDDCX-supply = <&pm8019_l12>; |
| HSIC_GDSC-supply = <&gdsc_usb_hsic>; |
| }; |
| |
| qcom,usbbam@f9a44000 { |
| compatible = "qcom,usb-bam-msm"; |
| reg = <0xf9a44000 0x11000>; |
| reg-names = "hsusb"; |
| interrupts = <0 135 0>; |
| interrupt-names = "hsusb"; |
| qcom,usb-active-bam = <1>; |
| qcom,usb-total-bam-num = <3>; |
| qcom,usb-bam-num-pipes = <16>; |
| qcom,ignore-core-reset-ack; |
| |
| qcom,pipe0 { |
| label = "usb-to-ipa"; |
| qcom,usb-bam-type = <1>; |
| qcom,usb-bam-mem-type = <2>; |
| qcom,src-bam-physical-address = <0xf9a44000>; |
| qcom,src-bam-pipe-index = <1>; |
| qcom,data-fifo-size = <0x600>; |
| qcom,descriptor-fifo-size = <0x300>; |
| }; |
| |
| qcom,pipe1 { |
| label = "ipa-to-usb"; |
| qcom,usb-bam-type = <1>; |
| qcom,usb-bam-mem-type = <2>; |
| qcom,dst-bam-physical-address = <0xf9a44000>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-size = <0x600>; |
| qcom,descriptor-fifo-size = <0x100>; |
| }; |
| }; |
| |
| qcom,nand@f9ac0000 { |
| compatible = "qcom,msm-nand"; |
| reg = <0xf9ac0000 0x1000>, |
| <0xf9ac4000 0x8000>; |
| reg-names = "nand_phys", |
| "bam_phys"; |
| interrupts = <0 247 0>; |
| interrupt-names = "bam_irq"; |
| }; |
| |
| spi@f9924000 { |
| cell-index = <0>; |
| compatible = "qcom,spi-qup-v2"; |
| reg = <0xf9924000 0x1000>; |
| interrupts = <0 96 0>; |
| spi-max-frequency = <25000000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| gpios = <&msmgpio 7 0>, /* CLK */ |
| <&msmgpio 5 0>, /* MISO */ |
| <&msmgpio 4 0>; /* MOSI */ |
| |
| cs-gpios = <&msmgpio 6 0>; |
| |
| ethernet-switch@0 { |
| compatible = "simtec,ks8851"; |
| reg = <0>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <75 0>; |
| spi-max-frequency = <4800000>; |
| }; |
| }; |
| |
| qcom,wdt@f9017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xf9017000 0x1000>; |
| interrupts = <1 2 0>, <1 1 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping = <0>; |
| }; |
| |
| rpm_bus: qcom,rpm-smd { |
| compatible = "qcom,rpm-smd"; |
| rpm-channel-name = "rpm_requests"; |
| rpm-channel-type = <15>; /* SMD_APPS_RPM */ |
| }; |
| |
| spmi_bus: qcom,spmi@fc4c0000 { |
| cell-index = <0>; |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0xfc4cf000 0x1000>, |
| <0Xfc4cb000 0x1000>; |
| /* 190,ee0_krait_hlos_spmi_periph_irq */ |
| /* 187,channel_0_krait_hlos_trans_done_irq */ |
| interrupts = <0 190 0 0 187 0>; |
| qcom,pmic-arb-ee = <0>; |
| qcom,pmic-arb-channel = <0>; |
| qcom,pmic-arb-ppid-map = <0x02400000>, /* TEMP_ALARM */ |
| <0x03100001>, /* VADC1_USR */ |
| <0x06100002>, /* RTC_ALARM */ |
| <0x06200003>, /* RTC_TIMER */ |
| <0x0a000004>, /* MPP1 */ |
| <0x0a100005>, /* MPP2 */ |
| <0x0a200006>, /* MPP3 */ |
| <0x0a300007>, /* MPP4 */ |
| <0x0a400008>, /* MPP5 */ |
| <0x0a500009>, /* MPP6 */ |
| <0x0c20000a>, /* GPIO3 */ |
| <0x0c30000b>, /* GPIO4 */ |
| <0x0c50000c>, /* GPIO6 */ |
| <0x0080000d>; /* PON */ |
| }; |
| |
| i2c@f9925000 { |
| cell-index = <3>; |
| compatible = "qcom,i2c-qup"; |
| reg = <0xf9925000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| interrupts = <0 97 0>; |
| interrupt-names = "qup_err_intr"; |
| qcom,i2c-bus-freq = <100000>; |
| qcom,i2c-src-freq = <24000000>; |
| }; |
| |
| sdcc2: qcom,sdcc@f98a4000 { |
| cell-index = <2>; /* SDC2 SD card slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf98a4000 0x800>, |
| <0xf98a4800 0x100>, |
| <0xf9884000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| |
| vdd-supply = <&ext_2p95v>; |
| |
| vdd-io-supply = <&pm8019_l13>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <6 22000>; |
| |
| qcom,pad-pull-on = <0x0 0x3 0x3>; |
| qcom,pad-pull-off = <0x0 0x3 0x3>; |
| qcom,pad-drv-on = <0x7 0x4 0x4>; |
| qcom,pad-drv-off = <0x0 0x0 0x0>; |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>; |
| qcom,sup-voltages = <2950 2950>; |
| qcom,bus-width = <4>; |
| qcom,xpc; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| qcom,current-limit = <800>; |
| |
| interrupt-parent = <&sdcc2>; |
| #address-cells = <0>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 220 0 |
| 2 &msmgpio 66 0x3>; |
| interrupt-names = "core_irq", "bam_irq", "status_irq"; |
| cd-gpios = <&msmgpio 66 0>; |
| }; |
| |
| sdcc3: qcom,sdcc@f9864000 { |
| cell-index = <3>; /* SDC3 SDIO slot */ |
| compatible = "qcom,msm-sdcc"; |
| reg = <0xf9864000 0x800>, |
| <0xf9864800 0x100>, |
| <0xf9844000 0x7000>; |
| reg-names = "core_mem", "dml_mem", "bam_mem"; |
| interrupts = <0 127 0>, <0 223 0>; |
| interrupt-names = "core_irq", "bam_irq"; |
| |
| gpios = <&msmgpio 25 0>, |
| <&msmgpio 24 0>, |
| <&msmgpio 16 0>, |
| <&msmgpio 17 0>, |
| <&msmgpio 18 0>, |
| <&msmgpio 19 0>; |
| qcom,gpio-names = "CLK", "CMD", "DAT0", "DAT1", "DAT2", "DAT3"; |
| |
| qcom,clk-rates = <400000 25000000 50000000 100000000>; |
| qcom,sup-voltages = <2950 2950>; |
| qcom,bus-width = <4>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50"; |
| }; |
| |
| qcom,bam_dmux@fc834000 { |
| compatible = "qcom,bam_dmux"; |
| reg = <0xfc834000 0x7000>; |
| interrupts = <0 29 1>; |
| }; |
| |
| qcom,ipa@fd4c0000 { |
| compatible = "qcom,ipa"; |
| reg = <0xfd4c0000 0x26000>, |
| <0xfd4c4000 0x14818>; |
| reg-names = "ipa-base", "bam-base"; |
| interrupts = <0 252 0>, |
| <0 253 0>; |
| interrupt-names = "ipa-irq", "bam-irq"; |
| |
| qcom,pipe1 { |
| label = "a2-to-ipa"; |
| qcom,src-bam-physical-address = <0xfc834000>; |
| qcom,ipa-bam-mem-type = <0>; |
| qcom,src-bam-pipe-index = <1>; |
| qcom,dst-bam-physical-address = <0xfd4c0000>; |
| qcom,dst-bam-pipe-index = <6>; |
| qcom,data-fifo-offset = <0x1000>; |
| qcom,data-fifo-size = <0xd00>; |
| qcom,descriptor-fifo-offset = <0x1d00>; |
| qcom,descriptor-fifo-size = <0x300>; |
| }; |
| |
| qcom,pipe2 { |
| label = "ipa-to-a2"; |
| qcom,src-bam-physical-address = <0xfd4c0000>; |
| qcom,ipa-bam-mem-type = <0>; |
| qcom,src-bam-pipe-index = <7>; |
| qcom,dst-bam-physical-address = <0xfc834000>; |
| qcom,dst-bam-pipe-index = <0>; |
| qcom,data-fifo-offset = <0x00>; |
| qcom,data-fifo-size = <0xd00>; |
| qcom,descriptor-fifo-offset = <0xd00>; |
| qcom,descriptor-fifo-size = <0x300>; |
| }; |
| }; |
| |
| qcom,acpuclk@f9010000 { |
| compatible = "qcom,acpuclk-9625"; |
| reg = <0xf9010008 0x10>, |
| <0xf9008004 0x4>; |
| reg-names = "rcg_base", "pwr_base"; |
| a5_cpu-supply = <&pm8019_l10_corner_ao>; |
| a5_mem-supply = <&pm8019_l12_ao>; |
| }; |
| |
| gdsc_usb_hsic: qcom,gdsc@fc400404 { |
| compatible = "qcom,gdsc"; |
| reg = <0xfc400404 0x4>; |
| regulator-name = "gdsc_usb_hsic"; |
| }; |
| |
| tsens@fc4a8000 { |
| compatible = "qcom,msm-tsens"; |
| reg = <0xfc4a8000 0x2000>, |
| <0xfc4b8000 0x1000>; |
| reg-names = "tsens_physical", "tsens_eeprom_physical"; |
| interrupts = <0 184 0>; |
| qcom,sensors = <5>; |
| qcom,slope = <3200 3200 3200 3200 3200>; |
| }; |
| |
| qcom,msm-rng@f9bff000 { |
| compatible = "qcom,msm-rng"; |
| reg = <0xf9bff000 0x200>; |
| qcom,msm-rng-iface-clk; |
| }; |
| |
| wcd9xxx_intc: wcd9xxx-irq { |
| compatible = "qcom,wcd9xxx-irq"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&msmgpio>; |
| interrupts = <20 0>; |
| interrupt-names = "cdc-int"; |
| }; |
| |
| i2c@f9925000 { |
| cell-index = <3>; |
| compatible = "qcom,i2c-qup"; |
| reg = <0xf9925000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "qup_phys_addr"; |
| interrupts = <0 97 0>; |
| interrupt-names = "qup_err_intr"; |
| qcom,i2c-bus-freq = <100000>; |
| qcom,i2c-src-freq = <24000000>; |
| |
| wcd9xxx_codec@0d{ |
| compatible = "qcom,wcd9xxx-i2c"; |
| reg = <0x0d>; |
| qcom,cdc-reset-gpio = <&msmgpio 22 0>; |
| interrupt-parent = <&wcd9xxx_intc>; |
| interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28>; |
| cdc-vdd-buck-supply = <&pm8019_l11>; |
| qcom,cdc-vdd-buck-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-buck-current = <25000>; |
| |
| cdc-vdd-tx-h-supply = <&pm8019_l11>; |
| qcom,cdc-vdd-tx-h-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-tx-h-current = <25000>; |
| |
| cdc-vdd-rx-h-supply = <&pm8019_l11>; |
| qcom,cdc-vdd-rx-h-voltage = <1800000 1800000>; |
| qcom,cdc-vdd-rx-h-current = <25000>; |
| |
| cdc-vddpx-1-supply = <&pm8019_l11>; |
| qcom,cdc-vddpx-1-voltage = <1800000 1800000>; |
| qcom,cdc-vddpx-1-current = <10000>; |
| |
| cdc-vdd-a-1p2v-supply = <&pm8019_l9>; |
| qcom,cdc-vdd-a-1p2v-voltage = <1200000 1200000>; |
| qcom,cdc-vdd-a-1p2v-current = <10000>; |
| |
| cdc-vddcx-1-supply = <&pm8019_l9>; |
| qcom,cdc-vddcx-1-voltage = <1200000 1200000>; |
| qcom,cdc-vddcx-1-current = <10000>; |
| |
| cdc-vddcx-2-supply = <&pm8019_l9>; |
| qcom,cdc-vddcx-2-voltage = <1200000 1200000>; |
| qcom,cdc-vddcx-2-current = <10000>; |
| |
| qcom,cdc-micbias-ldoh-v = <0x3>; |
| qcom,cdc-micbias-cfilt1-mv = <1800>; |
| qcom,cdc-micbias-cfilt2-mv = <2700>; |
| qcom,cdc-micbias-cfilt3-mv = <1800>; |
| qcom,cdc-micbias1-cfilt-sel = <0x0>; |
| qcom,cdc-micbias2-cfilt-sel = <0x1>; |
| qcom,cdc-micbias3-cfilt-sel = <0x2>; |
| qcom,cdc-micbias4-cfilt-sel = <0x2>; |
| qcom,cdc-mclk-clk-rate = <12288000>; |
| }; |
| |
| wcd9xxx_codec@77{ |
| compatible = "qcom,wcd9xxx-i2c"; |
| reg = <0x77>; |
| }; |
| |
| wcd9xxx_codec@66{ |
| compatible = "qcom,wcd9xxx-i2c"; |
| reg = <0x66>; |
| }; |
| |
| wcd9xxx_codec@55{ |
| compatible = "qcom,wcd9xxx-i2c"; |
| reg = <0x55>; |
| }; |
| }; |
| |
| sound { |
| compatible = "qcom,mdm9625-audio-taiko"; |
| qcom,model = "mdm9625-taiko-i2s-snd-card"; |
| |
| qcom,audio-routing = |
| "RX_BIAS", "MCLK", |
| "LDO_H", "MCLK", |
| "Ext Spk Bottom Pos", "LINEOUT1", |
| "Ext Spk Bottom Neg", "LINEOUT3", |
| "Ext Spk Top Pos", "LINEOUT2", |
| "Ext Spk Top Neg", "LINEOUT4", |
| "AMIC1", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Handset Mic", |
| "AMIC2", "MIC BIAS2 External", |
| "MIC BIAS2 External", "Headset Mic", |
| "AMIC3", "MIC BIAS3 Internal1", |
| "MIC BIAS3 Internal1", "ANCRight Headset Mic", |
| "AMIC4", "MIC BIAS1 Internal2", |
| "MIC BIAS1 Internal2", "ANCLeft Headset Mic", |
| "DMIC1", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Digital Mic1", |
| "DMIC2", "MIC BIAS1 External", |
| "MIC BIAS1 External", "Digital Mic2", |
| "DMIC3", "MIC BIAS3 External", |
| "MIC BIAS3 External", "Digital Mic3", |
| "DMIC4", "MIC BIAS3 External", |
| "MIC BIAS3 External", "Digital Mic4", |
| "DMIC5", "MIC BIAS4 External", |
| "MIC BIAS4 External", "Digital Mic5", |
| "DMIC6", "MIC BIAS4 External", |
| "MIC BIAS4 External", "Digital Mic6"; |
| qcom,taiko-mclk-clk-freq = <12288000>; |
| }; |
| |
| qcom,msm-adsp-loader { |
| compatible = "qcom,adsp-loader"; |
| qcom,adsp-state = <2>; |
| }; |
| |
| qcom,msm-pcm { |
| compatible = "qcom,msm-pcm-dsp"; |
| }; |
| |
| qcom,msm-pcm-routing { |
| compatible = "qcom,msm-pcm-routing"; |
| }; |
| |
| qcom,msm-compr-dsp { |
| compatible = "qcom,msm-compr-dsp"; |
| }; |
| |
| qcom,msm-voip-dsp { |
| compatible = "qcom,msm-voip-dsp"; |
| }; |
| |
| qcom,msm-pcm-voice { |
| compatible = "qcom,msm-pcm-voice"; |
| }; |
| |
| qcom,msm-dai-fe { |
| compatible = "qcom,msm-dai-fe"; |
| }; |
| |
| qcom,msm-pcm-afe { |
| compatible = "qcom,msm-pcm-afe"; |
| }; |
| |
| qcom,msm-pcm-hostless { |
| compatible = "qcom,msm-pcm-hostless"; |
| }; |
| |
| qcom,msm-dai-mi2s { |
| compatible = "qcom,msm-dai-mi2s"; |
| qcom,msm-dai-q6-mi2s-prim { |
| compatible = "qcom,msm-dai-q6-mi2s"; |
| qcom,msm-dai-q6-mi2s-dev-id = <0>; |
| qcom,msm-mi2s-rx-lines = <2>; |
| qcom,msm-mi2s-tx-lines = <1>; |
| }; |
| }; |
| |
| qcom,msm-dai-q6 { |
| compatible = "qcom,msm-dai-q6"; |
| }; |
| |
| qcom,mss { |
| compatible = "qcom,pil-q6v5-mss"; |
| interrupts = <0 24 1>; |
| }; |
| |
| qcom,smem@fa00000 { |
| compatible = "qcom,smem"; |
| reg = <0xfa00000 0x200000>, |
| <0xfa006000 0x1000>, |
| <0xfc428000 0x4000>; |
| reg-names = "smem", "irq-reg-base", "aux-mem1"; |
| |
| qcom,smd-modem { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <0>; |
| qcom,smd-irq-offset = <0x8>; |
| qcom,smd-irq-bitmask = <0x1000>; |
| qcom,pil-string = "modem"; |
| interrupts = <0 25 1>; |
| }; |
| |
| qcom,smsm-modem { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <0>; |
| qcom,smsm-irq-offset = <0x8>; |
| qcom,smsm-irq-bitmask = <0x2000>; |
| interrupts = <0 26 1>; |
| }; |
| |
| qcom,smd-adsp { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <1>; |
| qcom,smd-irq-offset = <0x8>; |
| qcom,smd-irq-bitmask = <0x100>; |
| qcom,pil-string = "adsp"; |
| interrupts = <0 156 1>; |
| }; |
| |
| qcom,smsm-adsp { |
| compatible = "qcom,smsm"; |
| qcom,smsm-edge = <1>; |
| qcom,smsm-irq-offset = <0x8>; |
| qcom,smsm-irq-bitmask = <0x200>; |
| interrupts = <0 157 1>; |
| }; |
| |
| qcom,smd-rpm { |
| compatible = "qcom,smd"; |
| qcom,smd-edge = <15>; |
| qcom,smd-irq-offset = <0x8>; |
| qcom,smd-irq-bitmask = <0x1>; |
| interrupts = <0 168 1>; |
| qcom,irq-no-suspend; |
| }; |
| }; |
| }; |
| |
| /include/ "msm-pm8019-rpm-regulator.dtsi" |
| /include/ "msm-pm8019.dtsi" |
| /include/ "msm9625-regulator.dtsi" |
| |
| &pm8019_vadc { |
| chan@31 { |
| label = "batt_id_therm"; |
| reg = <0x31>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@33 { |
| label = "pa_therm1"; |
| reg = <0x33>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@34 { |
| label = "pa_therm2"; |
| reg = <0x34>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@32 { |
| label = "xo_therm"; |
| reg = <0x32>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@3c { |
| label = "xo_therm_amux"; |
| reg = <0x3c>; |
| qcom,decimation = <0>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| }; |