| /* Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it> |
| * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it> |
| * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. |
| * |
| * Copyright (c) 2011, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/param.h> |
| #include <linux/jiffies.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/idr.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <asm/unaligned.h> |
| #include <linux/time.h> |
| #include <linux/i2c/bq27520.h> |
| #include <linux/mfd/pmic8058.h> |
| #include <linux/regulator/pmic8058-regulator.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/err.h> |
| #include <linux/msm-charger.h> |
| |
| #define DRIVER_VERSION "1.1.0" |
| /* Bq27520 standard data commands */ |
| #define BQ27520_REG_CNTL 0x00 |
| #define BQ27520_REG_AR 0x02 |
| #define BQ27520_REG_ARTTE 0x04 |
| #define BQ27520_REG_TEMP 0x06 |
| #define BQ27520_REG_VOLT 0x08 |
| #define BQ27520_REG_FLAGS 0x0A |
| #define BQ27520_REG_NAC 0x0C |
| #define BQ27520_REG_FAC 0x0e |
| #define BQ27520_REG_RM 0x10 |
| #define BQ27520_REG_FCC 0x12 |
| #define BQ27520_REG_AI 0x14 |
| #define BQ27520_REG_TTE 0x16 |
| #define BQ27520_REG_TTF 0x18 |
| #define BQ27520_REG_SI 0x1a |
| #define BQ27520_REG_STTE 0x1c |
| #define BQ27520_REG_MLI 0x1e |
| #define BQ27520_REG_MLTTE 0x20 |
| #define BQ27520_REG_AE 0x22 |
| #define BQ27520_REG_AP 0x24 |
| #define BQ27520_REG_TTECP 0x26 |
| #define BQ27520_REG_SOH 0x28 |
| #define BQ27520_REG_SOC 0x2c |
| #define BQ27520_REG_NIC 0x2e |
| #define BQ27520_REG_ICR 0x30 |
| #define BQ27520_REG_LOGIDX 0x32 |
| #define BQ27520_REG_LOGBUF 0x34 |
| #define BQ27520_FLAG_DSC BIT(0) |
| #define BQ27520_FLAG_FC BIT(9) |
| #define BQ27520_FLAG_BAT_DET BIT(3) |
| #define BQ27520_CS_DLOGEN BIT(15) |
| #define BQ27520_CS_SS BIT(13) |
| /* Control subcommands */ |
| #define BQ27520_SUBCMD_CTNL_STATUS 0x0000 |
| #define BQ27520_SUBCMD_DEVCIE_TYPE 0x0001 |
| #define BQ27520_SUBCMD_FW_VER 0x0002 |
| #define BQ27520_SUBCMD_HW_VER 0x0003 |
| #define BQ27520_SUBCMD_DF_CSUM 0x0004 |
| #define BQ27520_SUBCMD_PREV_MACW 0x0007 |
| #define BQ27520_SUBCMD_CHEM_ID 0x0008 |
| #define BQ27520_SUBCMD_BD_OFFSET 0x0009 |
| #define BQ27520_SUBCMD_INT_OFFSET 0x000a |
| #define BQ27520_SUBCMD_CC_VER 0x000b |
| #define BQ27520_SUBCMD_OCV 0x000c |
| #define BQ27520_SUBCMD_BAT_INS 0x000d |
| #define BQ27520_SUBCMD_BAT_REM 0x000e |
| #define BQ27520_SUBCMD_SET_HIB 0x0011 |
| #define BQ27520_SUBCMD_CLR_HIB 0x0012 |
| #define BQ27520_SUBCMD_SET_SLP 0x0013 |
| #define BQ27520_SUBCMD_CLR_SLP 0x0014 |
| #define BQ27520_SUBCMD_FCT_RES 0x0015 |
| #define BQ27520_SUBCMD_ENABLE_DLOG 0x0018 |
| #define BQ27520_SUBCMD_DISABLE_DLOG 0x0019 |
| #define BQ27520_SUBCMD_SEALED 0x0020 |
| #define BQ27520_SUBCMD_ENABLE_IT 0x0021 |
| #define BQ27520_SUBCMD_DISABLE_IT 0x0023 |
| #define BQ27520_SUBCMD_CAL_MODE 0x0040 |
| #define BQ27520_SUBCMD_RESET 0x0041 |
| |
| #define ZERO_DEGREE_CELSIUS_IN_TENTH_KELVIN (-2731) |
| #define BQ27520_INIT_DELAY ((HZ)*1) |
| #define BQ27520_POLLING_STATUS ((HZ)*3) |
| #define BQ27520_COULOMB_POLL ((HZ)*30) |
| |
| /* If the system has several batteries we need a different name for each |
| * of them... |
| */ |
| static DEFINE_IDR(battery_id); |
| static DEFINE_MUTEX(battery_mutex); |
| |
| struct bq27520_device_info; |
| struct bq27520_access_methods { |
| int (*read)(u8 reg, int *rt_value, int b_single, |
| struct bq27520_device_info *di); |
| }; |
| |
| struct bq27520_device_info { |
| struct device *dev; |
| int id; |
| struct bq27520_access_methods *bus; |
| struct i2c_client *client; |
| const struct bq27520_platform_data *pdata; |
| struct work_struct counter; |
| /* 300ms delay is needed after bq27520 is powered up |
| * and before any successful I2C transaction |
| */ |
| struct delayed_work hw_config; |
| uint32_t irq; |
| }; |
| |
| enum { |
| GET_BATTERY_STATUS, |
| GET_BATTERY_TEMPERATURE, |
| GET_BATTERY_VOLTAGE, |
| GET_BATTERY_CAPACITY, |
| NUM_OF_STATUS, |
| }; |
| |
| struct bq27520_status { |
| /* Informations owned and maintained by Bq27520 driver, updated |
| * by poller or SOC_INT interrupt, decoupling from I/Oing |
| * hardware directly |
| */ |
| int status[NUM_OF_STATUS]; |
| spinlock_t lock; |
| struct delayed_work poller; |
| }; |
| |
| static struct bq27520_status current_battery_status; |
| static struct bq27520_device_info *bq27520_di; |
| static int coulomb_counter; |
| static spinlock_t lock; /* protect access to coulomb_counter */ |
| static struct timer_list timer; /* charge counter timer every 30 secs */ |
| |
| static int bq27520_i2c_txsubcmd(u8 reg, unsigned short subcmd, |
| struct bq27520_device_info *di); |
| |
| static int bq27520_read(u8 reg, int *rt_value, int b_single, |
| struct bq27520_device_info *di) |
| { |
| return di->bus->read(reg, rt_value, b_single, di); |
| } |
| |
| /* |
| * Return the battery temperature in tenths of degree Celsius |
| * Or < 0 if something fails. |
| */ |
| static int bq27520_battery_temperature(struct bq27520_device_info *di) |
| { |
| int ret, temp = 0; |
| |
| ret = bq27520_read(BQ27520_REG_TEMP, &temp, 0, di); |
| if (ret) { |
| dev_err(di->dev, "error %d reading temperature\n", ret); |
| return ret; |
| } |
| |
| return temp + ZERO_DEGREE_CELSIUS_IN_TENTH_KELVIN; |
| } |
| |
| /* |
| * Return the battery Voltage in milivolts |
| * Or < 0 if something fails. |
| */ |
| static int bq27520_battery_voltage(struct bq27520_device_info *di) |
| { |
| int ret, volt = 0; |
| |
| ret = bq27520_read(BQ27520_REG_VOLT, &volt, 0, di); |
| if (ret) { |
| dev_err(di->dev, "error %d reading voltage\n", ret); |
| return ret; |
| } |
| |
| return volt; |
| } |
| |
| /* |
| * Return the battery Relative State-of-Charge |
| * Or < 0 if something fails. |
| */ |
| static int bq27520_battery_rsoc(struct bq27520_device_info *di) |
| { |
| int ret, rsoc = 0; |
| |
| ret = bq27520_read(BQ27520_REG_SOC, &rsoc, 0, di); |
| |
| if (ret) { |
| dev_err(di->dev, |
| "error %d reading relative State-of-Charge\n", ret); |
| return ret; |
| } |
| |
| return rsoc; |
| } |
| |
| static void bq27520_cntl_cmd(struct bq27520_device_info *di, |
| int subcmd) |
| { |
| bq27520_i2c_txsubcmd(BQ27520_REG_CNTL, subcmd, di); |
| } |
| |
| /* |
| * i2c specific code |
| */ |
| static int bq27520_i2c_txsubcmd(u8 reg, unsigned short subcmd, |
| struct bq27520_device_info *di) |
| { |
| struct i2c_msg msg; |
| unsigned char data[3]; |
| |
| if (!di->client) |
| return -ENODEV; |
| |
| memset(data, 0, sizeof(data)); |
| data[0] = reg; |
| data[1] = subcmd & 0x00FF; |
| data[2] = (subcmd & 0xFF00) >> 8; |
| |
| msg.addr = di->client->addr; |
| msg.flags = 0; |
| msg.len = 3; |
| msg.buf = data; |
| |
| if (i2c_transfer(di->client->adapter, &msg, 1) < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int bq27520_chip_config(struct bq27520_device_info *di) |
| { |
| int flags = 0, ret = 0; |
| |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_CTNL_STATUS); |
| udelay(66); |
| ret = bq27520_read(BQ27520_REG_CNTL, &flags, 0, di); |
| if (ret < 0) { |
| dev_err(di->dev, "error %d reading register %02x\n", |
| ret, BQ27520_REG_CNTL); |
| return ret; |
| } |
| udelay(66); |
| |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_ENABLE_IT); |
| udelay(66); |
| |
| if (di->pdata->enable_dlog && !(flags & BQ27520_CS_DLOGEN)) { |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_ENABLE_DLOG); |
| udelay(66); |
| } |
| |
| return 0; |
| } |
| |
| static void bq27520_every_30secs(unsigned long data) |
| { |
| struct bq27520_device_info *di = (struct bq27520_device_info *)data; |
| |
| schedule_work(&di->counter); |
| mod_timer(&timer, jiffies + BQ27520_COULOMB_POLL); |
| } |
| |
| static void bq27520_coulomb_counter_work(struct work_struct *work) |
| { |
| int value = 0, temp = 0, index = 0, ret = 0, count = 0; |
| struct bq27520_device_info *di; |
| unsigned long flags; |
| |
| di = container_of(work, struct bq27520_device_info, counter); |
| |
| /* retrieve 30 values from FIFO of coulomb data logging buffer |
| * and average over time |
| */ |
| do { |
| ret = bq27520_read(BQ27520_REG_LOGBUF, &temp, 0, di); |
| if (ret < 0) |
| break; |
| if (temp != 0x7FFF) { |
| ++count; |
| value += temp; |
| } |
| udelay(66); |
| ret = bq27520_read(BQ27520_REG_LOGIDX, &index, 0, di); |
| if (ret < 0) |
| break; |
| udelay(66); |
| } while (index != 0 || temp != 0x7FFF); |
| |
| if (ret < 0) { |
| dev_err(di->dev, "Error %d reading datalog register\n", ret); |
| return; |
| } |
| |
| if (count) { |
| spin_lock_irqsave(&lock, flags); |
| coulomb_counter = value/count; |
| spin_unlock_irqrestore(&lock, flags); |
| } |
| } |
| |
| static int bq27520_is_battery_present(void) |
| { |
| return 1; |
| } |
| |
| static int bq27520_is_battery_temp_within_range(void) |
| { |
| return 1; |
| } |
| |
| static int bq27520_is_battery_id_valid(void) |
| { |
| return 1; |
| } |
| |
| static int bq27520_status_getter(int function) |
| { |
| int status = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(¤t_battery_status.lock, flags); |
| status = current_battery_status.status[function]; |
| spin_unlock_irqrestore(¤t_battery_status.lock, flags); |
| |
| return status; |
| } |
| |
| static int bq27520_get_battery_mvolts(void) |
| { |
| return bq27520_status_getter(GET_BATTERY_VOLTAGE); |
| } |
| |
| static int bq27520_get_battery_temperature(void) |
| { |
| return bq27520_status_getter(GET_BATTERY_TEMPERATURE); |
| } |
| |
| static int bq27520_get_battery_status(void) |
| { |
| return bq27520_status_getter(GET_BATTERY_STATUS); |
| } |
| |
| static int bq27520_get_remaining_capacity(void) |
| { |
| return bq27520_status_getter(GET_BATTERY_CAPACITY); |
| } |
| |
| static struct msm_battery_gauge bq27520_batt_gauge = { |
| .get_battery_mvolts = bq27520_get_battery_mvolts, |
| .get_battery_temperature = bq27520_get_battery_temperature, |
| .is_battery_present = bq27520_is_battery_present, |
| .is_battery_temp_within_range = bq27520_is_battery_temp_within_range, |
| .is_battery_id_valid = bq27520_is_battery_id_valid, |
| .get_battery_status = bq27520_get_battery_status, |
| .get_batt_remaining_capacity = bq27520_get_remaining_capacity, |
| }; |
| |
| static void update_current_battery_status(int data) |
| { |
| int status[4], ret = 0; |
| unsigned long flag; |
| |
| memset(status, 0, sizeof status); |
| ret = bq27520_battery_rsoc(bq27520_di); |
| status[GET_BATTERY_CAPACITY] = (ret < 0) ? 0 : ret; |
| |
| status[GET_BATTERY_VOLTAGE] = bq27520_battery_voltage(bq27520_di); |
| status[GET_BATTERY_TEMPERATURE] = |
| bq27520_battery_temperature(bq27520_di); |
| |
| spin_lock_irqsave(¤t_battery_status.lock, flag); |
| current_battery_status.status[GET_BATTERY_STATUS] = data; |
| current_battery_status.status[GET_BATTERY_VOLTAGE] = |
| status[GET_BATTERY_VOLTAGE]; |
| current_battery_status.status[GET_BATTERY_TEMPERATURE] = |
| status[GET_BATTERY_TEMPERATURE]; |
| current_battery_status.status[GET_BATTERY_CAPACITY] = |
| status[GET_BATTERY_CAPACITY]; |
| spin_unlock_irqrestore(¤t_battery_status.lock, flag); |
| } |
| |
| /* only if battery charging satus changes then notify msm_charger. otherwise |
| * only refresh current_batter_status |
| */ |
| static int if_notify_msm_charger(int *data) |
| { |
| int ret = 0, flags = 0, status = 0; |
| unsigned long flag; |
| |
| ret = bq27520_read(BQ27520_REG_FLAGS, &flags, 0, bq27520_di); |
| if (ret < 0) { |
| dev_err(bq27520_di->dev, "error %d reading register %02x\n", |
| ret, BQ27520_REG_FLAGS); |
| status = POWER_SUPPLY_STATUS_UNKNOWN; |
| } else { |
| if (flags & BQ27520_FLAG_FC) |
| status = POWER_SUPPLY_STATUS_FULL; |
| else if (flags & BQ27520_FLAG_DSC) |
| status = POWER_SUPPLY_STATUS_DISCHARGING; |
| else |
| status = POWER_SUPPLY_STATUS_CHARGING; |
| } |
| |
| *data = status; |
| spin_lock_irqsave(¤t_battery_status.lock, flag); |
| ret = (status != current_battery_status.status[GET_BATTERY_STATUS]); |
| spin_unlock_irqrestore(¤t_battery_status.lock, flag); |
| return ret; |
| } |
| |
| static void battery_status_poller(struct work_struct *work) |
| { |
| int status = 0, temp = 0; |
| |
| temp = if_notify_msm_charger(&status); |
| update_current_battery_status(status); |
| if (temp) |
| msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE); |
| |
| schedule_delayed_work(¤t_battery_status.poller, |
| BQ27520_POLLING_STATUS); |
| } |
| |
| static void bq27520_hw_config(struct work_struct *work) |
| { |
| int ret = 0, flags = 0, type = 0, fw_ver = 0, status = 0; |
| struct bq27520_device_info *di; |
| |
| di = container_of(work, struct bq27520_device_info, hw_config.work); |
| |
| pr_debug(KERN_INFO "Enter bq27520_hw_config\n"); |
| ret = bq27520_chip_config(di); |
| if (ret) { |
| dev_err(di->dev, "Failed to config Bq27520 ret = %d\n", ret); |
| return; |
| } |
| /* bq27520 is ready for access, update current_battery_status by reading |
| * from hardware |
| */ |
| if_notify_msm_charger(&status); |
| update_current_battery_status(status); |
| msm_battery_gauge_register(&bq27520_batt_gauge); |
| msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE); |
| |
| enable_irq(di->irq); |
| |
| /* poll battery status every 3 seconds, if charging status changes, |
| * notify msm_charger |
| */ |
| schedule_delayed_work(¤t_battery_status.poller, |
| BQ27520_POLLING_STATUS); |
| |
| if (di->pdata->enable_dlog) { |
| schedule_work(&di->counter); |
| init_timer(&timer); |
| timer.function = &bq27520_every_30secs; |
| timer.data = (unsigned long)di; |
| timer.expires = jiffies + BQ27520_COULOMB_POLL; |
| add_timer(&timer); |
| } |
| |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_CTNL_STATUS); |
| udelay(66); |
| bq27520_read(BQ27520_REG_CNTL, &flags, 0, di); |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_DEVCIE_TYPE); |
| udelay(66); |
| bq27520_read(BQ27520_REG_CNTL, &type, 0, di); |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_FW_VER); |
| udelay(66); |
| bq27520_read(BQ27520_REG_CNTL, &fw_ver, 0, di); |
| |
| dev_info(di->dev, "DEVICE_TYPE is 0x%02X, FIRMWARE_VERSION\ |
| is 0x%02X\n", type, fw_ver); |
| dev_info(di->dev, "Complete bq27520 configuration 0x%02X\n", flags); |
| } |
| |
| static int bq27520_read_i2c(u8 reg, int *rt_value, int b_single, |
| struct bq27520_device_info *di) |
| { |
| struct i2c_client *client = di->client; |
| struct i2c_msg msg[1]; |
| unsigned char data[2]; |
| int err; |
| |
| if (!client->adapter) |
| return -ENODEV; |
| |
| msg->addr = client->addr; |
| msg->flags = 0; |
| msg->len = 1; |
| msg->buf = data; |
| |
| data[0] = reg; |
| err = i2c_transfer(client->adapter, msg, 1); |
| |
| if (err >= 0) { |
| if (!b_single) |
| msg->len = 2; |
| else |
| msg->len = 1; |
| |
| msg->flags = I2C_M_RD; |
| err = i2c_transfer(client->adapter, msg, 1); |
| if (err >= 0) { |
| if (!b_single) |
| *rt_value = get_unaligned_le16(data); |
| else |
| *rt_value = data[0]; |
| |
| return 0; |
| } |
| } |
| return err; |
| } |
| |
| #ifdef CONFIG_BQ27520_TEST_ENABLE |
| static int reg; |
| static int subcmd; |
| static ssize_t bq27520_read_stdcmd(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret; |
| int temp = 0; |
| struct platform_device *client; |
| struct bq27520_device_info *di; |
| |
| client = to_platform_device(dev); |
| di = platform_get_drvdata(client); |
| |
| if (reg <= BQ27520_REG_ICR && reg > 0x00) { |
| ret = bq27520_read(reg, &temp, 0, di); |
| if (ret) |
| ret = snprintf(buf, PAGE_SIZE, "Read Error!\n"); |
| else |
| ret = snprintf(buf, PAGE_SIZE, "0x%02x\n", temp); |
| } else |
| ret = snprintf(buf, PAGE_SIZE, "Register Error!\n"); |
| |
| return ret; |
| } |
| |
| static ssize_t bq27520_write_stdcmd(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| ssize_t ret = strnlen(buf, PAGE_SIZE); |
| int cmd; |
| |
| sscanf(buf, "%x", &cmd); |
| reg = cmd; |
| dev_info(dev, "recv'd cmd is 0x%02X\n", reg); |
| return ret; |
| } |
| |
| static ssize_t bq27520_read_subcmd(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret, temp = 0; |
| struct platform_device *client; |
| struct bq27520_device_info *di; |
| |
| client = to_platform_device(dev); |
| di = platform_get_drvdata(client); |
| |
| if (subcmd == BQ27520_SUBCMD_DEVCIE_TYPE || |
| subcmd == BQ27520_SUBCMD_FW_VER || |
| subcmd == BQ27520_SUBCMD_HW_VER || |
| subcmd == BQ27520_SUBCMD_CHEM_ID) { |
| |
| bq27520_cntl_cmd(di, subcmd);/* Retrieve Chip status */ |
| udelay(66); |
| ret = bq27520_read(BQ27520_REG_CNTL, &temp, 0, di); |
| |
| if (ret) |
| ret = snprintf(buf, PAGE_SIZE, "Read Error!\n"); |
| else |
| ret = snprintf(buf, PAGE_SIZE, "0x%02x\n", temp); |
| } else |
| ret = snprintf(buf, PAGE_SIZE, "Register Error!\n"); |
| |
| return ret; |
| } |
| |
| static ssize_t bq27520_write_subcmd(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| ssize_t ret = strnlen(buf, PAGE_SIZE); |
| int cmd; |
| |
| sscanf(buf, "%x", &cmd); |
| subcmd = cmd; |
| return ret; |
| } |
| |
| static DEVICE_ATTR(std_cmd, S_IRUGO|S_IWUGO, bq27520_read_stdcmd, |
| bq27520_write_stdcmd); |
| static DEVICE_ATTR(sub_cmd, S_IRUGO|S_IWUGO, bq27520_read_subcmd, |
| bq27520_write_subcmd); |
| static struct attribute *fs_attrs[] = { |
| &dev_attr_std_cmd.attr, |
| &dev_attr_sub_cmd.attr, |
| NULL, |
| }; |
| static struct attribute_group fs_attr_group = { |
| .attrs = fs_attrs, |
| }; |
| |
| static struct platform_device this_device = { |
| .name = "bq27520-test", |
| .id = -1, |
| .dev.platform_data = NULL, |
| }; |
| #endif |
| |
| static irqreturn_t soc_irqhandler(int irq, void *dev_id) |
| { |
| int status = 0, temp = 0; |
| |
| temp = if_notify_msm_charger(&status); |
| update_current_battery_status(status); |
| if (temp) |
| msm_charger_notify_event(NULL, CHG_BATT_STATUS_CHANGE); |
| return IRQ_HANDLED; |
| } |
| |
| static struct regulator *vreg_bq27520; |
| static int bq27520_power(bool enable, struct bq27520_device_info *di) |
| { |
| int rc = 0, ret; |
| const struct bq27520_platform_data *platdata; |
| |
| platdata = di->pdata; |
| if (enable) { |
| /* switch on Vreg_S3 */ |
| rc = regulator_enable(vreg_bq27520); |
| if (rc < 0) { |
| dev_err(di->dev, "%s: vreg %s %s failed (%d)\n", |
| __func__, platdata->vreg_name, "enable", rc); |
| goto vreg_fail; |
| } |
| |
| /* Battery gauge enable and switch on onchip 2.5V LDO */ |
| rc = gpio_request(platdata->chip_en, "GAUGE_EN"); |
| if (rc) { |
| dev_err(di->dev, "%s: fail to request gpio %d (%d)\n", |
| __func__, platdata->chip_en, rc); |
| goto vreg_fail; |
| } |
| |
| gpio_direction_output(platdata->chip_en, 0); |
| gpio_set_value(platdata->chip_en, 1); |
| rc = gpio_request(platdata->soc_int, "GAUGE_SOC_INT"); |
| if (rc) { |
| dev_err(di->dev, "%s: fail to request gpio %d (%d)\n", |
| __func__, platdata->soc_int, rc); |
| goto gpio_fail; |
| } |
| gpio_direction_input(platdata->soc_int); |
| di->irq = gpio_to_irq(platdata->soc_int); |
| rc = request_threaded_irq(di->irq, NULL, soc_irqhandler, |
| IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING, |
| "BQ27520_IRQ", di); |
| if (rc) { |
| dev_err(di->dev, "%s: fail to request irq %d (%d)\n", |
| __func__, platdata->soc_int, rc); |
| goto irqreq_fail; |
| } else { |
| disable_irq_nosync(di->irq); |
| } |
| } else { |
| free_irq(di->irq, di); |
| gpio_free(platdata->soc_int); |
| /* switch off on-chip 2.5V LDO and disable Battery gauge */ |
| gpio_set_value(platdata->chip_en, 0); |
| gpio_free(platdata->chip_en); |
| /* switch off Vreg_S3 */ |
| rc = regulator_disable(vreg_bq27520); |
| if (rc < 0) { |
| dev_err(di->dev, "%s: vreg %s %s failed (%d)\n", |
| __func__, platdata->vreg_name, "disable", rc); |
| goto vreg_fail; |
| } |
| } |
| return rc; |
| |
| irqreq_fail: |
| gpio_free(platdata->soc_int); |
| gpio_fail: |
| gpio_set_value(platdata->chip_en, 0); |
| gpio_free(platdata->chip_en); |
| vreg_fail: |
| ret = !enable ? regulator_enable(vreg_bq27520) : |
| regulator_disable(vreg_bq27520); |
| if (ret < 0) { |
| dev_err(di->dev, "%s: vreg %s %s failed (%d) in err path\n", |
| __func__, platdata->vreg_name, |
| !enable ? "enable" : "disable", ret); |
| } |
| return rc; |
| } |
| |
| static int bq27520_dev_setup(bool enable, struct bq27520_device_info *di) |
| { |
| int rc; |
| const struct bq27520_platform_data *platdata; |
| |
| platdata = di->pdata; |
| if (enable) { |
| /* enable and set voltage Vreg_S3 */ |
| vreg_bq27520 = regulator_get(NULL, |
| platdata->vreg_name); |
| if (IS_ERR(vreg_bq27520)) { |
| dev_err(di->dev, "%s: regulator get of %s\ |
| failed (%ld)\n", __func__, platdata->vreg_name, |
| PTR_ERR(vreg_bq27520)); |
| rc = PTR_ERR(vreg_bq27520); |
| goto vreg_get_fail; |
| } |
| rc = regulator_set_voltage(vreg_bq27520, |
| platdata->vreg_value, platdata->vreg_value); |
| if (rc) { |
| dev_err(di->dev, "%s: regulator_set_voltage(%s) failed\ |
| (%d)\n", __func__, platdata->vreg_name, rc); |
| goto vreg_get_fail; |
| } |
| } else { |
| regulator_put(vreg_bq27520); |
| } |
| return 0; |
| |
| vreg_get_fail: |
| regulator_put(vreg_bq27520); |
| return rc; |
| } |
| |
| static int bq27520_battery_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct bq27520_device_info *di; |
| struct bq27520_access_methods *bus; |
| const struct bq27520_platform_data *pdata; |
| int num, retval = 0; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) |
| return -ENODEV; |
| |
| pdata = client->dev.platform_data; |
| |
| /* Get new ID for the new battery device */ |
| retval = idr_pre_get(&battery_id, GFP_KERNEL); |
| if (retval == 0) |
| return -ENOMEM; |
| mutex_lock(&battery_mutex); |
| retval = idr_get_new(&battery_id, client, &num); |
| mutex_unlock(&battery_mutex); |
| if (retval < 0) |
| return retval; |
| |
| di = kzalloc(sizeof(*di), GFP_KERNEL); |
| if (!di) { |
| dev_err(&client->dev, "failed to allocate device info data\n"); |
| retval = -ENOMEM; |
| goto batt_failed_1; |
| } |
| di->id = num; |
| di->pdata = pdata; |
| |
| bus = kzalloc(sizeof(*bus), GFP_KERNEL); |
| if (!bus) { |
| dev_err(&client->dev, "failed to allocate data\n"); |
| retval = -ENOMEM; |
| goto batt_failed_2; |
| } |
| |
| i2c_set_clientdata(client, di); |
| di->dev = &client->dev; |
| bus->read = &bq27520_read_i2c; |
| di->bus = bus; |
| di->client = client; |
| |
| #ifdef CONFIG_BQ27520_TEST_ENABLE |
| platform_set_drvdata(&this_device, di); |
| retval = platform_device_register(&this_device); |
| if (!retval) { |
| retval = sysfs_create_group(&this_device.dev.kobj, |
| &fs_attr_group); |
| if (retval) |
| goto batt_failed_3; |
| } else |
| goto batt_failed_3; |
| #endif |
| |
| retval = bq27520_dev_setup(true, di); |
| if (retval) { |
| dev_err(&client->dev, "failed to setup ret = %d\n", retval); |
| goto batt_failed_3; |
| } |
| |
| retval = bq27520_power(true, di); |
| if (retval) { |
| dev_err(&client->dev, "failed to powerup ret = %d\n", retval); |
| goto batt_failed_3; |
| } |
| |
| spin_lock_init(&lock); |
| |
| bq27520_di = di; |
| if (pdata->enable_dlog) |
| INIT_WORK(&di->counter, bq27520_coulomb_counter_work); |
| |
| INIT_DELAYED_WORK(¤t_battery_status.poller, |
| battery_status_poller); |
| INIT_DELAYED_WORK(&di->hw_config, bq27520_hw_config); |
| schedule_delayed_work(&di->hw_config, BQ27520_INIT_DELAY); |
| |
| return 0; |
| |
| batt_failed_3: |
| kfree(bus); |
| batt_failed_2: |
| kfree(di); |
| batt_failed_1: |
| mutex_lock(&battery_mutex); |
| idr_remove(&battery_id, num); |
| mutex_unlock(&battery_mutex); |
| |
| return retval; |
| } |
| |
| static int bq27520_battery_remove(struct i2c_client *client) |
| { |
| struct bq27520_device_info *di = i2c_get_clientdata(client); |
| |
| if (di->pdata->enable_dlog) { |
| del_timer_sync(&timer); |
| cancel_work_sync(&di->counter); |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_DISABLE_DLOG); |
| udelay(66); |
| } |
| |
| bq27520_cntl_cmd(di, BQ27520_SUBCMD_DISABLE_IT); |
| cancel_delayed_work_sync(&di->hw_config); |
| cancel_delayed_work_sync(¤t_battery_status.poller); |
| |
| bq27520_dev_setup(false, di); |
| bq27520_power(false, di); |
| |
| kfree(di->bus); |
| |
| mutex_lock(&battery_mutex); |
| idr_remove(&battery_id, di->id); |
| mutex_unlock(&battery_mutex); |
| |
| kfree(di); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bq27520_suspend(struct device *dev) |
| { |
| struct bq27520_device_info *di = dev_get_drvdata(dev); |
| |
| disable_irq_nosync(di->irq); |
| if (di->pdata->enable_dlog) { |
| del_timer_sync(&timer); |
| cancel_work_sync(&di->counter); |
| } |
| |
| cancel_delayed_work_sync(¤t_battery_status.poller); |
| return 0; |
| } |
| |
| static int bq27520_resume(struct device *dev) |
| { |
| struct bq27520_device_info *di = dev_get_drvdata(dev); |
| |
| enable_irq(di->irq); |
| if (di->pdata->enable_dlog) |
| add_timer(&timer); |
| |
| schedule_delayed_work(¤t_battery_status.poller, |
| BQ27520_POLLING_STATUS); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops bq27520_pm_ops = { |
| .suspend = bq27520_suspend, |
| .resume = bq27520_resume, |
| }; |
| #endif |
| |
| static const struct i2c_device_id bq27520_id[] = { |
| { "bq27520", 1 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, BQ27520_id); |
| |
| static struct i2c_driver bq27520_battery_driver = { |
| .driver = { |
| .name = "bq27520-battery", |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &bq27520_pm_ops, |
| #endif |
| }, |
| .probe = bq27520_battery_probe, |
| .remove = bq27520_battery_remove, |
| .id_table = bq27520_id, |
| }; |
| |
| static void init_battery_status(void) |
| { |
| spin_lock_init(¤t_battery_status.lock); |
| current_battery_status.status[GET_BATTERY_STATUS] = |
| POWER_SUPPLY_STATUS_UNKNOWN; |
| } |
| |
| static int __init bq27520_battery_init(void) |
| { |
| int ret; |
| |
| /* initialize current_battery_status, and register with msm-charger */ |
| init_battery_status(); |
| |
| ret = i2c_add_driver(&bq27520_battery_driver); |
| if (ret) |
| printk(KERN_ERR "Unable to register driver ret = %d\n", ret); |
| |
| return ret; |
| } |
| module_init(bq27520_battery_init); |
| |
| static void __exit bq27520_battery_exit(void) |
| { |
| i2c_del_driver(&bq27520_battery_driver); |
| msm_battery_gauge_unregister(&bq27520_batt_gauge); |
| } |
| module_exit(bq27520_battery_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Qualcomm Innovation Center, Inc."); |
| MODULE_DESCRIPTION("BQ27520 battery monitor driver"); |