| |
| #ifndef _IEEE1394_CORE_H |
| #define _IEEE1394_CORE_H |
| |
| #include <linux/slab.h> |
| #include <asm/atomic.h> |
| #include <asm/semaphore.h> |
| #include "hosts.h" |
| |
| |
| struct hpsb_packet { |
| /* This struct is basically read-only for hosts with the exception of |
| * the data buffer contents and xnext - see below. */ |
| |
| /* This can be used for host driver internal linking. |
| * |
| * NOTE: This must be left in init state when the driver is done |
| * with it (e.g. by using list_del_init()), since the core does |
| * some sanity checks to make sure the packet is not on a |
| * driver_list when free'ing it. */ |
| struct list_head driver_list; |
| |
| nodeid_t node_id; |
| |
| /* Async and Iso types should be clear, raw means send-as-is, do not |
| * CRC! Byte swapping shall still be done in this case. */ |
| enum { hpsb_async, hpsb_iso, hpsb_raw } __attribute__((packed)) type; |
| |
| /* Okay, this is core internal and a no care for hosts. |
| * queued = queued for sending |
| * pending = sent, waiting for response |
| * complete = processing completed, successful or not |
| */ |
| enum { |
| hpsb_unused, hpsb_queued, hpsb_pending, hpsb_complete |
| } __attribute__((packed)) state; |
| |
| /* These are core internal. */ |
| signed char tlabel; |
| signed char ack_code; |
| unsigned char tcode; |
| |
| unsigned expect_response:1; |
| unsigned no_waiter:1; |
| |
| /* Speed to transmit with: 0 = 100Mbps, 1 = 200Mbps, 2 = 400Mbps */ |
| unsigned speed_code:2; |
| |
| /* |
| * *header and *data are guaranteed to be 32-bit DMAable and may be |
| * overwritten to allow in-place byte swapping. Neither of these is |
| * CRCed (the sizes also don't include CRC), but contain space for at |
| * least one additional quadlet to allow in-place CRCing. The memory is |
| * also guaranteed to be DMA mappable. |
| */ |
| quadlet_t *header; |
| quadlet_t *data; |
| size_t header_size; |
| size_t data_size; |
| |
| |
| struct hpsb_host *host; |
| unsigned int generation; |
| |
| atomic_t refcnt; |
| |
| /* Function (and possible data to pass to it) to call when this |
| * packet is completed. */ |
| void (*complete_routine)(void *); |
| void *complete_data; |
| |
| /* XXX This is just a hack at the moment */ |
| struct sk_buff *skb; |
| |
| /* Store jiffies for implementing bus timeouts. */ |
| unsigned long sendtime; |
| |
| quadlet_t embedded_header[5]; |
| }; |
| |
| /* Set a task for when a packet completes */ |
| void hpsb_set_packet_complete_task(struct hpsb_packet *packet, |
| void (*routine)(void *), void *data); |
| |
| static inline struct hpsb_packet *driver_packet(struct list_head *l) |
| { |
| return list_entry(l, struct hpsb_packet, driver_list); |
| } |
| |
| void abort_timedouts(unsigned long __opaque); |
| |
| struct hpsb_packet *hpsb_alloc_packet(size_t data_size); |
| void hpsb_free_packet(struct hpsb_packet *packet); |
| |
| |
| /* |
| * Generation counter for the complete 1394 subsystem. Generation gets |
| * incremented on every change in the subsystem (e.g. bus reset). |
| * |
| * Use the functions, not the variable. |
| */ |
| static inline unsigned int get_hpsb_generation(struct hpsb_host *host) |
| { |
| return atomic_read(&host->generation); |
| } |
| |
| /* |
| * Send a PHY configuration packet, return 0 on success, negative |
| * errno on failure. |
| */ |
| int hpsb_send_phy_config(struct hpsb_host *host, int rootid, int gapcnt); |
| |
| /* |
| * Queue packet for transmitting, return 0 on success, negative errno |
| * on failure. |
| */ |
| int hpsb_send_packet(struct hpsb_packet *packet); |
| |
| /* |
| * Queue packet for transmitting, and block until the transaction |
| * completes. Return 0 on success, negative errno on failure. |
| */ |
| int hpsb_send_packet_and_wait(struct hpsb_packet *packet); |
| |
| /* Initiate bus reset on the given host. Returns 1 if bus reset already in |
| * progress, 0 otherwise. */ |
| int hpsb_reset_bus(struct hpsb_host *host, int type); |
| |
| /* |
| * The following functions are exported for host driver module usage. All of |
| * them are safe to use in interrupt contexts, although some are quite |
| * complicated so you may want to run them in bottom halves instead of calling |
| * them directly. |
| */ |
| |
| /* Notify a bus reset to the core. Returns 1 if bus reset already in progress, |
| * 0 otherwise. */ |
| int hpsb_bus_reset(struct hpsb_host *host); |
| |
| /* |
| * Hand over received selfid packet to the core. Complement check (second |
| * quadlet is complement of first) is expected to be done and successful. |
| */ |
| void hpsb_selfid_received(struct hpsb_host *host, quadlet_t sid); |
| |
| /* |
| * Notify completion of SelfID stage to the core and report new physical ID |
| * and whether host is root now. |
| */ |
| void hpsb_selfid_complete(struct hpsb_host *host, int phyid, int isroot); |
| |
| /* |
| * Notify core of sending a packet. Ackcode is the ack code returned for async |
| * transmits or ACKX_SEND_ERROR if the transmission failed completely; ACKX_NONE |
| * for other cases (internal errors that don't justify a panic). Safe to call |
| * from within a transmit packet routine. |
| */ |
| void hpsb_packet_sent(struct hpsb_host *host, struct hpsb_packet *packet, |
| int ackcode); |
| |
| /* |
| * Hand over received packet to the core. The contents of data are expected to |
| * be the full packet but with the CRCs left out (data block follows header |
| * immediately), with the header (i.e. the first four quadlets) in machine byte |
| * order and the data block in big endian. *data can be safely overwritten |
| * after this call. |
| * |
| * If the packet is a write request, write_acked is to be set to true if it was |
| * ack_complete'd already, false otherwise. This arg is ignored for any other |
| * packet type. |
| */ |
| void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size, |
| int write_acked); |
| |
| |
| /* |
| * CHARACTER DEVICE DISPATCHING |
| * |
| * All ieee1394 character device drivers share the same major number |
| * (major 171). The 256 minor numbers are allocated to the various |
| * task-specific interfaces (raw1394, video1394, dv1394, etc) in |
| * blocks of 16. |
| * |
| * The core ieee1394.o module allocates the device number region |
| * 171:0-255, the various drivers must then cdev_add() their cdev |
| * objects to handle their respective sub-regions. |
| * |
| * Minor device number block allocations: |
| * |
| * Block 0 ( 0- 15) raw1394 |
| * Block 1 ( 16- 31) video1394 |
| * Block 2 ( 32- 47) dv1394 |
| * |
| * Blocks 3-14 free for future allocation |
| * |
| * Block 15 (240-255) reserved for drivers under development, etc. |
| */ |
| |
| #define IEEE1394_MAJOR 171 |
| |
| #define IEEE1394_MINOR_BLOCK_RAW1394 0 |
| #define IEEE1394_MINOR_BLOCK_VIDEO1394 1 |
| #define IEEE1394_MINOR_BLOCK_DV1394 2 |
| #define IEEE1394_MINOR_BLOCK_EXPERIMENTAL 15 |
| |
| #define IEEE1394_CORE_DEV MKDEV(IEEE1394_MAJOR, 0) |
| #define IEEE1394_RAW1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16) |
| #define IEEE1394_VIDEO1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_VIDEO1394 * 16) |
| #define IEEE1394_DV1394_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_DV1394 * 16) |
| #define IEEE1394_EXPERIMENTAL_DEV MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_EXPERIMENTAL * 16) |
| |
| /* return the index (within a minor number block) of a file */ |
| static inline unsigned char ieee1394_file_to_instance(struct file *file) |
| { |
| return file->f_dentry->d_inode->i_cindex; |
| } |
| |
| extern int hpsb_disable_irm; |
| |
| /* Our sysfs bus entry */ |
| extern struct bus_type ieee1394_bus_type; |
| extern struct class hpsb_host_class; |
| extern struct class *hpsb_protocol_class; |
| |
| #endif /* _IEEE1394_CORE_H */ |
| |