| /* |
| * drivers/net/gianfar_ethtool.c |
| * |
| * Gianfar Ethernet Driver |
| * Ethtool support for Gianfar Enet |
| * Based on e1000 ethtool support |
| * |
| * Author: Andy Fleming |
| * Maintainer: Kumar Gala |
| * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com> |
| * |
| * Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc. |
| * |
| * This software may be used and distributed according to |
| * the terms of the GNU Public License, Version 2, incorporated herein |
| * by reference. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/spinlock.h> |
| #include <linux/mm.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <linux/module.h> |
| #include <linux/crc32.h> |
| #include <asm/types.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| |
| #include "gianfar.h" |
| |
| extern void gfar_start(struct net_device *dev); |
| extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit); |
| |
| #define GFAR_MAX_COAL_USECS 0xffff |
| #define GFAR_MAX_COAL_FRAMES 0xff |
| static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, |
| u64 * buf); |
| static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf); |
| static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); |
| static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals); |
| static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals); |
| static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals); |
| static void gfar_gdrvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo); |
| |
| static char stat_gstrings[][ETH_GSTRING_LEN] = { |
| "rx-dropped-by-kernel", |
| "rx-large-frame-errors", |
| "rx-short-frame-errors", |
| "rx-non-octet-errors", |
| "rx-crc-errors", |
| "rx-overrun-errors", |
| "rx-busy-errors", |
| "rx-babbling-errors", |
| "rx-truncated-frames", |
| "ethernet-bus-error", |
| "tx-babbling-errors", |
| "tx-underrun-errors", |
| "rx-skb-missing-errors", |
| "tx-timeout-errors", |
| "tx-rx-64-frames", |
| "tx-rx-65-127-frames", |
| "tx-rx-128-255-frames", |
| "tx-rx-256-511-frames", |
| "tx-rx-512-1023-frames", |
| "tx-rx-1024-1518-frames", |
| "tx-rx-1519-1522-good-vlan", |
| "rx-bytes", |
| "rx-packets", |
| "rx-fcs-errors", |
| "receive-multicast-packet", |
| "receive-broadcast-packet", |
| "rx-control-frame-packets", |
| "rx-pause-frame-packets", |
| "rx-unknown-op-code", |
| "rx-alignment-error", |
| "rx-frame-length-error", |
| "rx-code-error", |
| "rx-carrier-sense-error", |
| "rx-undersize-packets", |
| "rx-oversize-packets", |
| "rx-fragmented-frames", |
| "rx-jabber-frames", |
| "rx-dropped-frames", |
| "tx-byte-counter", |
| "tx-packets", |
| "tx-multicast-packets", |
| "tx-broadcast-packets", |
| "tx-pause-control-frames", |
| "tx-deferral-packets", |
| "tx-excessive-deferral-packets", |
| "tx-single-collision-packets", |
| "tx-multiple-collision-packets", |
| "tx-late-collision-packets", |
| "tx-excessive-collision-packets", |
| "tx-total-collision", |
| "reserved", |
| "tx-dropped-frames", |
| "tx-jabber-frames", |
| "tx-fcs-errors", |
| "tx-control-frames", |
| "tx-oversize-frames", |
| "tx-undersize-frames", |
| "tx-fragmented-frames", |
| }; |
| |
| /* Fill in a buffer with the strings which correspond to the |
| * stats */ |
| static void gfar_gstrings(struct net_device *dev, u32 stringset, u8 * buf) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) |
| memcpy(buf, stat_gstrings, GFAR_STATS_LEN * ETH_GSTRING_LEN); |
| else |
| memcpy(buf, stat_gstrings, |
| GFAR_EXTRA_STATS_LEN * ETH_GSTRING_LEN); |
| } |
| |
| /* Fill in an array of 64-bit statistics from various sources. |
| * This array will be appended to the end of the ethtool_stats |
| * structure, and returned to user space |
| */ |
| static void gfar_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf) |
| { |
| int i; |
| struct gfar_private *priv = netdev_priv(dev); |
| struct gfar __iomem *regs = priv->gfargrp[0].regs; |
| u64 *extra = (u64 *) & priv->extra_stats; |
| |
| if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) { |
| u32 __iomem *rmon = (u32 __iomem *) ®s->rmon; |
| struct gfar_stats *stats = (struct gfar_stats *) buf; |
| |
| for (i = 0; i < GFAR_RMON_LEN; i++) |
| stats->rmon[i] = (u64) gfar_read(&rmon[i]); |
| |
| for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) |
| stats->extra[i] = extra[i]; |
| } else |
| for (i = 0; i < GFAR_EXTRA_STATS_LEN; i++) |
| buf[i] = extra[i]; |
| } |
| |
| static int gfar_sset_count(struct net_device *dev, int sset) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| switch (sset) { |
| case ETH_SS_STATS: |
| if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) |
| return GFAR_STATS_LEN; |
| else |
| return GFAR_EXTRA_STATS_LEN; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /* Fills in the drvinfo structure with some basic info */ |
| static void gfar_gdrvinfo(struct net_device *dev, struct |
| ethtool_drvinfo *drvinfo) |
| { |
| strncpy(drvinfo->driver, DRV_NAME, GFAR_INFOSTR_LEN); |
| strncpy(drvinfo->version, gfar_driver_version, GFAR_INFOSTR_LEN); |
| strncpy(drvinfo->fw_version, "N/A", GFAR_INFOSTR_LEN); |
| strncpy(drvinfo->bus_info, "N/A", GFAR_INFOSTR_LEN); |
| drvinfo->regdump_len = 0; |
| drvinfo->eedump_len = 0; |
| } |
| |
| |
| static int gfar_ssettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| struct phy_device *phydev = priv->phydev; |
| |
| if (NULL == phydev) |
| return -ENODEV; |
| |
| return phy_ethtool_sset(phydev, cmd); |
| } |
| |
| |
| /* Return the current settings in the ethtool_cmd structure */ |
| static int gfar_gsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| struct phy_device *phydev = priv->phydev; |
| struct gfar_priv_rx_q *rx_queue = NULL; |
| struct gfar_priv_tx_q *tx_queue = NULL; |
| |
| if (NULL == phydev) |
| return -ENODEV; |
| tx_queue = priv->tx_queue[0]; |
| rx_queue = priv->rx_queue[0]; |
| |
| /* etsec-1.7 and older versions have only one txic |
| * and rxic regs although they support multiple queues */ |
| cmd->maxtxpkt = get_icft_value(tx_queue->txic); |
| cmd->maxrxpkt = get_icft_value(rx_queue->rxic); |
| |
| return phy_ethtool_gset(phydev, cmd); |
| } |
| |
| /* Return the length of the register structure */ |
| static int gfar_reglen(struct net_device *dev) |
| { |
| return sizeof (struct gfar); |
| } |
| |
| /* Return a dump of the GFAR register space */ |
| static void gfar_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) |
| { |
| int i; |
| struct gfar_private *priv = netdev_priv(dev); |
| u32 __iomem *theregs = (u32 __iomem *) priv->gfargrp[0].regs; |
| u32 *buf = (u32 *) regbuf; |
| |
| for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++) |
| buf[i] = gfar_read(&theregs[i]); |
| } |
| |
| /* Convert microseconds to ethernet clock ticks, which changes |
| * depending on what speed the controller is running at */ |
| static unsigned int gfar_usecs2ticks(struct gfar_private *priv, unsigned int usecs) |
| { |
| unsigned int count; |
| |
| /* The timer is different, depending on the interface speed */ |
| switch (priv->phydev->speed) { |
| case SPEED_1000: |
| count = GFAR_GBIT_TIME; |
| break; |
| case SPEED_100: |
| count = GFAR_100_TIME; |
| break; |
| case SPEED_10: |
| default: |
| count = GFAR_10_TIME; |
| break; |
| } |
| |
| /* Make sure we return a number greater than 0 |
| * if usecs > 0 */ |
| return (usecs * 1000 + count - 1) / count; |
| } |
| |
| /* Convert ethernet clock ticks to microseconds */ |
| static unsigned int gfar_ticks2usecs(struct gfar_private *priv, unsigned int ticks) |
| { |
| unsigned int count; |
| |
| /* The timer is different, depending on the interface speed */ |
| switch (priv->phydev->speed) { |
| case SPEED_1000: |
| count = GFAR_GBIT_TIME; |
| break; |
| case SPEED_100: |
| count = GFAR_100_TIME; |
| break; |
| case SPEED_10: |
| default: |
| count = GFAR_10_TIME; |
| break; |
| } |
| |
| /* Make sure we return a number greater than 0 */ |
| /* if ticks is > 0 */ |
| return (ticks * count) / 1000; |
| } |
| |
| /* Get the coalescing parameters, and put them in the cvals |
| * structure. */ |
| static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| struct gfar_priv_rx_q *rx_queue = NULL; |
| struct gfar_priv_tx_q *tx_queue = NULL; |
| unsigned long rxtime; |
| unsigned long rxcount; |
| unsigned long txtime; |
| unsigned long txcount; |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) |
| return -EOPNOTSUPP; |
| |
| if (NULL == priv->phydev) |
| return -ENODEV; |
| |
| rx_queue = priv->rx_queue[0]; |
| tx_queue = priv->tx_queue[0]; |
| |
| rxtime = get_ictt_value(rx_queue->rxic); |
| rxcount = get_icft_value(rx_queue->rxic); |
| txtime = get_ictt_value(tx_queue->txic); |
| txcount = get_icft_value(tx_queue->txic); |
| cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, rxtime); |
| cvals->rx_max_coalesced_frames = rxcount; |
| |
| cvals->tx_coalesce_usecs = gfar_ticks2usecs(priv, txtime); |
| cvals->tx_max_coalesced_frames = txcount; |
| |
| cvals->use_adaptive_rx_coalesce = 0; |
| cvals->use_adaptive_tx_coalesce = 0; |
| |
| cvals->pkt_rate_low = 0; |
| cvals->rx_coalesce_usecs_low = 0; |
| cvals->rx_max_coalesced_frames_low = 0; |
| cvals->tx_coalesce_usecs_low = 0; |
| cvals->tx_max_coalesced_frames_low = 0; |
| |
| /* When the packet rate is below pkt_rate_high but above |
| * pkt_rate_low (both measured in packets per second) the |
| * normal {rx,tx}_* coalescing parameters are used. |
| */ |
| |
| /* When the packet rate is (measured in packets per second) |
| * is above pkt_rate_high, the {rx,tx}_*_high parameters are |
| * used. |
| */ |
| cvals->pkt_rate_high = 0; |
| cvals->rx_coalesce_usecs_high = 0; |
| cvals->rx_max_coalesced_frames_high = 0; |
| cvals->tx_coalesce_usecs_high = 0; |
| cvals->tx_max_coalesced_frames_high = 0; |
| |
| /* How often to do adaptive coalescing packet rate sampling, |
| * measured in seconds. Must not be zero. |
| */ |
| cvals->rate_sample_interval = 0; |
| |
| return 0; |
| } |
| |
| /* Change the coalescing values. |
| * Both cvals->*_usecs and cvals->*_frames have to be > 0 |
| * in order for coalescing to be active |
| */ |
| static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| int i = 0; |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE)) |
| return -EOPNOTSUPP; |
| |
| /* Set up rx coalescing */ |
| /* As of now, we will enable/disable coalescing for all |
| * queues together in case of eTSEC2, this will be modified |
| * along with the ethtool interface */ |
| if ((cvals->rx_coalesce_usecs == 0) || |
| (cvals->rx_max_coalesced_frames == 0)) { |
| for (i = 0; i < priv->num_rx_queues; i++) |
| priv->rx_queue[i]->rxcoalescing = 0; |
| } else { |
| for (i = 0; i < priv->num_rx_queues; i++) |
| priv->rx_queue[i]->rxcoalescing = 1; |
| } |
| |
| if (NULL == priv->phydev) |
| return -ENODEV; |
| |
| /* Check the bounds of the values */ |
| if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) { |
| pr_info("Coalescing is limited to %d microseconds\n", |
| GFAR_MAX_COAL_USECS); |
| return -EINVAL; |
| } |
| |
| if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { |
| pr_info("Coalescing is limited to %d frames\n", |
| GFAR_MAX_COAL_FRAMES); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < priv->num_rx_queues; i++) { |
| priv->rx_queue[i]->rxic = mk_ic_value( |
| cvals->rx_max_coalesced_frames, |
| gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs)); |
| } |
| |
| /* Set up tx coalescing */ |
| if ((cvals->tx_coalesce_usecs == 0) || |
| (cvals->tx_max_coalesced_frames == 0)) { |
| for (i = 0; i < priv->num_tx_queues; i++) |
| priv->tx_queue[i]->txcoalescing = 0; |
| } else { |
| for (i = 0; i < priv->num_tx_queues; i++) |
| priv->tx_queue[i]->txcoalescing = 1; |
| } |
| |
| /* Check the bounds of the values */ |
| if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) { |
| pr_info("Coalescing is limited to %d microseconds\n", |
| GFAR_MAX_COAL_USECS); |
| return -EINVAL; |
| } |
| |
| if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) { |
| pr_info("Coalescing is limited to %d frames\n", |
| GFAR_MAX_COAL_FRAMES); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < priv->num_tx_queues; i++) { |
| priv->tx_queue[i]->txic = mk_ic_value( |
| cvals->tx_max_coalesced_frames, |
| gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs)); |
| } |
| |
| gfar_configure_coalescing(priv, 0xFF, 0xFF); |
| |
| return 0; |
| } |
| |
| /* Fills in rvals with the current ring parameters. Currently, |
| * rx, rx_mini, and rx_jumbo rings are the same size, as mini and |
| * jumbo are ignored by the driver */ |
| static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| struct gfar_priv_tx_q *tx_queue = NULL; |
| struct gfar_priv_rx_q *rx_queue = NULL; |
| |
| tx_queue = priv->tx_queue[0]; |
| rx_queue = priv->rx_queue[0]; |
| |
| rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE; |
| rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE; |
| rvals->rx_jumbo_max_pending = GFAR_RX_MAX_RING_SIZE; |
| rvals->tx_max_pending = GFAR_TX_MAX_RING_SIZE; |
| |
| /* Values changeable by the user. The valid values are |
| * in the range 1 to the "*_max_pending" counterpart above. |
| */ |
| rvals->rx_pending = rx_queue->rx_ring_size; |
| rvals->rx_mini_pending = rx_queue->rx_ring_size; |
| rvals->rx_jumbo_pending = rx_queue->rx_ring_size; |
| rvals->tx_pending = tx_queue->tx_ring_size; |
| } |
| |
| /* Change the current ring parameters, stopping the controller if |
| * necessary so that we don't mess things up while we're in |
| * motion. We wait for the ring to be clean before reallocating |
| * the rings. */ |
| static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| int err = 0, i = 0; |
| |
| if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE) |
| return -EINVAL; |
| |
| if (!is_power_of_2(rvals->rx_pending)) { |
| printk("%s: Ring sizes must be a power of 2\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| if (rvals->tx_pending > GFAR_TX_MAX_RING_SIZE) |
| return -EINVAL; |
| |
| if (!is_power_of_2(rvals->tx_pending)) { |
| printk("%s: Ring sizes must be a power of 2\n", |
| dev->name); |
| return -EINVAL; |
| } |
| |
| |
| if (dev->flags & IFF_UP) { |
| unsigned long flags; |
| |
| /* Halt TX and RX, and process the frames which |
| * have already been received */ |
| local_irq_save(flags); |
| lock_tx_qs(priv); |
| lock_rx_qs(priv); |
| |
| gfar_halt(dev); |
| |
| unlock_rx_qs(priv); |
| unlock_tx_qs(priv); |
| local_irq_restore(flags); |
| |
| for (i = 0; i < priv->num_rx_queues; i++) |
| gfar_clean_rx_ring(priv->rx_queue[i], |
| priv->rx_queue[i]->rx_ring_size); |
| |
| /* Now we take down the rings to rebuild them */ |
| stop_gfar(dev); |
| } |
| |
| /* Change the size */ |
| for (i = 0; i < priv->num_rx_queues; i++) { |
| priv->rx_queue[i]->rx_ring_size = rvals->rx_pending; |
| priv->tx_queue[i]->tx_ring_size = rvals->tx_pending; |
| priv->tx_queue[i]->num_txbdfree = priv->tx_queue[i]->tx_ring_size; |
| } |
| |
| /* Rebuild the rings with the new size */ |
| if (dev->flags & IFF_UP) { |
| err = startup_gfar(dev); |
| netif_tx_wake_all_queues(dev); |
| } |
| return err; |
| } |
| |
| static int gfar_set_rx_csum(struct net_device *dev, uint32_t data) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| int err = 0, i = 0; |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) |
| return -EOPNOTSUPP; |
| |
| |
| if (dev->flags & IFF_UP) { |
| /* Halt TX and RX, and process the frames which |
| * have already been received */ |
| local_irq_save(flags); |
| lock_tx_qs(priv); |
| lock_rx_qs(priv); |
| |
| gfar_halt(dev); |
| |
| unlock_tx_qs(priv); |
| unlock_rx_qs(priv); |
| local_irq_restore(flags); |
| |
| for (i = 0; i < priv->num_rx_queues; i++) |
| gfar_clean_rx_ring(priv->rx_queue[i], |
| priv->rx_queue[i]->rx_ring_size); |
| |
| /* Now we take down the rings to rebuild them */ |
| stop_gfar(dev); |
| } |
| |
| spin_lock_irqsave(&priv->bflock, flags); |
| priv->rx_csum_enable = data; |
| spin_unlock_irqrestore(&priv->bflock, flags); |
| |
| if (dev->flags & IFF_UP) { |
| err = startup_gfar(dev); |
| netif_tx_wake_all_queues(dev); |
| } |
| return err; |
| } |
| |
| static uint32_t gfar_get_rx_csum(struct net_device *dev) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) |
| return 0; |
| |
| return priv->rx_csum_enable; |
| } |
| |
| static int gfar_set_tx_csum(struct net_device *dev, uint32_t data) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) |
| return -EOPNOTSUPP; |
| |
| netif_tx_lock_bh(dev); |
| |
| if (data) |
| dev->features |= NETIF_F_IP_CSUM; |
| else |
| dev->features &= ~NETIF_F_IP_CSUM; |
| |
| netif_tx_unlock_bh(dev); |
| |
| return 0; |
| } |
| |
| static uint32_t gfar_get_tx_csum(struct net_device *dev) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM)) |
| return 0; |
| |
| return (dev->features & NETIF_F_IP_CSUM) != 0; |
| } |
| |
| static uint32_t gfar_get_msglevel(struct net_device *dev) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| return priv->msg_enable; |
| } |
| |
| static void gfar_set_msglevel(struct net_device *dev, uint32_t data) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| priv->msg_enable = data; |
| } |
| |
| #ifdef CONFIG_PM |
| static void gfar_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| |
| if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) { |
| wol->supported = WAKE_MAGIC; |
| wol->wolopts = priv->wol_en ? WAKE_MAGIC : 0; |
| } else { |
| wol->supported = wol->wolopts = 0; |
| } |
| } |
| |
| static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) && |
| wol->wolopts != 0) |
| return -EINVAL; |
| |
| if (wol->wolopts & ~WAKE_MAGIC) |
| return -EINVAL; |
| |
| spin_lock_irqsave(&priv->bflock, flags); |
| priv->wol_en = wol->wolopts & WAKE_MAGIC ? 1 : 0; |
| device_set_wakeup_enable(&dev->dev, priv->wol_en); |
| spin_unlock_irqrestore(&priv->bflock, flags); |
| |
| return 0; |
| } |
| #endif |
| |
| static int gfar_ethflow_to_class(int flow_type, u64 *class) |
| { |
| switch (flow_type) { |
| case TCP_V4_FLOW: |
| *class = CLASS_CODE_TCP_IPV4; |
| break; |
| case UDP_V4_FLOW: |
| *class = CLASS_CODE_UDP_IPV4; |
| break; |
| case AH_V4_FLOW: |
| case ESP_V4_FLOW: |
| *class = CLASS_CODE_AH_ESP_IPV4; |
| break; |
| case SCTP_V4_FLOW: |
| *class = CLASS_CODE_SCTP_IPV4; |
| break; |
| case TCP_V6_FLOW: |
| *class = CLASS_CODE_TCP_IPV6; |
| break; |
| case UDP_V6_FLOW: |
| *class = CLASS_CODE_UDP_IPV6; |
| break; |
| case AH_V6_FLOW: |
| case ESP_V6_FLOW: |
| *class = CLASS_CODE_AH_ESP_IPV6; |
| break; |
| case SCTP_V6_FLOW: |
| *class = CLASS_CODE_SCTP_IPV6; |
| break; |
| default: |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow) |
| { |
| u32 fcr = 0x0, fpr = FPR_FILER_MASK; |
| |
| if (ethflow & RXH_L2DA) { |
| fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH | |
| RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| |
| fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH | |
| RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & RXH_VLAN) { |
| fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & RXH_IP_SRC) { |
| fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & (RXH_IP_DST)) { |
| fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & RXH_L3_PROTO) { |
| fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & RXH_L4_B_0_1) { |
| fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| if (ethflow & RXH_L4_B_2_3) { |
| fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH | |
| RQFCR_AND | RQFCR_HASHTBL_0; |
| ftp_rqfpr[priv->cur_filer_idx] = fpr; |
| ftp_rqfcr[priv->cur_filer_idx] = fcr; |
| gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr); |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| } |
| |
| static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u64 class) |
| { |
| unsigned int last_rule_idx = priv->cur_filer_idx; |
| unsigned int cmp_rqfpr; |
| unsigned int local_rqfpr[MAX_FILER_IDX + 1]; |
| unsigned int local_rqfcr[MAX_FILER_IDX + 1]; |
| int i = 0x0, k = 0x0; |
| int j = MAX_FILER_IDX, l = 0x0; |
| |
| switch (class) { |
| case TCP_V4_FLOW: |
| cmp_rqfpr = RQFPR_IPV4 |RQFPR_TCP; |
| break; |
| case UDP_V4_FLOW: |
| cmp_rqfpr = RQFPR_IPV4 |RQFPR_UDP; |
| break; |
| case TCP_V6_FLOW: |
| cmp_rqfpr = RQFPR_IPV6 |RQFPR_TCP; |
| break; |
| case UDP_V6_FLOW: |
| cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP; |
| break; |
| case IPV4_FLOW: |
| cmp_rqfpr = RQFPR_IPV4; |
| case IPV6_FLOW: |
| cmp_rqfpr = RQFPR_IPV6; |
| break; |
| default: |
| printk(KERN_ERR "Right now this class is not supported\n"); |
| return 0; |
| } |
| |
| for (i = 0; i < MAX_FILER_IDX + 1; i++) { |
| local_rqfpr[j] = ftp_rqfpr[i]; |
| local_rqfcr[j] = ftp_rqfcr[i]; |
| j--; |
| if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE | |
| RQFCR_CLE |RQFCR_AND)) && |
| (ftp_rqfpr[i] == cmp_rqfpr)) |
| break; |
| } |
| |
| if (i == MAX_FILER_IDX + 1) { |
| printk(KERN_ERR "No parse rule found, "); |
| printk(KERN_ERR "can't create hash rules\n"); |
| return 0; |
| } |
| |
| /* If a match was found, then it begins the starting of a cluster rule |
| * if it was already programmed, we need to overwrite these rules |
| */ |
| for (l = i+1; l < MAX_FILER_IDX; l++) { |
| if ((ftp_rqfcr[l] & RQFCR_CLE) && |
| !(ftp_rqfcr[l] & RQFCR_AND)) { |
| ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT | |
| RQFCR_HASHTBL_0 | RQFCR_PID_MASK; |
| ftp_rqfpr[l] = FPR_FILER_MASK; |
| gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]); |
| break; |
| } |
| |
| if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND)) |
| continue; |
| else { |
| local_rqfpr[j] = ftp_rqfpr[l]; |
| local_rqfcr[j] = ftp_rqfcr[l]; |
| j--; |
| } |
| } |
| |
| priv->cur_filer_idx = l - 1; |
| last_rule_idx = l; |
| |
| /* hash rules */ |
| ethflow_to_filer_rules(priv, ethflow); |
| |
| /* Write back the popped out rules again */ |
| for (k = j+1; k < MAX_FILER_IDX; k++) { |
| ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k]; |
| ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k]; |
| gfar_write_filer(priv, priv->cur_filer_idx, |
| local_rqfcr[k], local_rqfpr[k]); |
| if (!priv->cur_filer_idx) |
| break; |
| priv->cur_filer_idx = priv->cur_filer_idx - 1; |
| } |
| |
| return 1; |
| } |
| |
| static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd) |
| { |
| u64 class; |
| |
| if (!gfar_ethflow_to_class(cmd->flow_type, &class)) |
| return -EINVAL; |
| |
| if (class < CLASS_CODE_USER_PROG1 || |
| class > CLASS_CODE_SCTP_IPV6) |
| return -EINVAL; |
| |
| /* write the filer rules here */ |
| if (!gfar_ethflow_to_filer_table(priv, cmd->data, cmd->flow_type)) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd) |
| { |
| struct gfar_private *priv = netdev_priv(dev); |
| int ret = 0; |
| |
| switch(cmd->cmd) { |
| case ETHTOOL_SRXFH: |
| ret = gfar_set_hash_opts(priv, cmd); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| const struct ethtool_ops gfar_ethtool_ops = { |
| .get_settings = gfar_gsettings, |
| .set_settings = gfar_ssettings, |
| .get_drvinfo = gfar_gdrvinfo, |
| .get_regs_len = gfar_reglen, |
| .get_regs = gfar_get_regs, |
| .get_link = ethtool_op_get_link, |
| .get_coalesce = gfar_gcoalesce, |
| .set_coalesce = gfar_scoalesce, |
| .get_ringparam = gfar_gringparam, |
| .set_ringparam = gfar_sringparam, |
| .get_strings = gfar_gstrings, |
| .get_sset_count = gfar_sset_count, |
| .get_ethtool_stats = gfar_fill_stats, |
| .get_rx_csum = gfar_get_rx_csum, |
| .get_tx_csum = gfar_get_tx_csum, |
| .set_rx_csum = gfar_set_rx_csum, |
| .set_tx_csum = gfar_set_tx_csum, |
| .set_sg = ethtool_op_set_sg, |
| .get_msglevel = gfar_get_msglevel, |
| .set_msglevel = gfar_set_msglevel, |
| #ifdef CONFIG_PM |
| .get_wol = gfar_get_wol, |
| .set_wol = gfar_set_wol, |
| #endif |
| .set_rxnfc = gfar_set_nfc, |
| }; |