| /***************************************************************************/ |
| |
| /* |
| * pit.c -- Freescale ColdFire PIT timer. Currently this type of |
| * hardware timer only exists in the Freescale ColdFire |
| * 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire |
| * family members will probably use it too. |
| * |
| * Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com) |
| * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) |
| */ |
| |
| /***************************************************************************/ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/param.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/clockchips.h> |
| #include <asm/machdep.h> |
| #include <asm/io.h> |
| #include <asm/coldfire.h> |
| #include <asm/mcfpit.h> |
| #include <asm/mcfsim.h> |
| |
| /***************************************************************************/ |
| |
| /* |
| * By default use timer1 as the system clock timer. |
| */ |
| #define FREQ ((MCF_CLK / 2) / 64) |
| #define TA(a) (MCF_IPSBAR + MCFPIT_BASE1 + (a)) |
| #define INTC0 (MCF_IPSBAR + MCFICM_INTC0) |
| #define PIT_CYCLES_PER_JIFFY (FREQ / HZ) |
| |
| static u32 pit_cnt; |
| |
| /* |
| * Initialize the PIT timer. |
| * |
| * This is also called after resume to bring the PIT into operation again. |
| */ |
| |
| static void init_cf_pit_timer(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); |
| __raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR)); |
| __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \ |
| MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \ |
| MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR)); |
| break; |
| |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); |
| __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \ |
| MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \ |
| TA(MCFPIT_PCSR)); |
| break; |
| |
| case CLOCK_EVT_MODE_RESUME: |
| /* Nothing to do here */ |
| break; |
| } |
| } |
| |
| /* |
| * Program the next event in oneshot mode |
| * |
| * Delta is given in PIT ticks |
| */ |
| static int cf_pit_next_event(unsigned long delta, |
| struct clock_event_device *evt) |
| { |
| __raw_writew(delta, TA(MCFPIT_PMR)); |
| return 0; |
| } |
| |
| struct clock_event_device cf_pit_clockevent = { |
| .name = "pit", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .set_mode = init_cf_pit_timer, |
| .set_next_event = cf_pit_next_event, |
| .shift = 32, |
| .irq = MCFINT_VECBASE + MCFINT_PIT1, |
| }; |
| |
| |
| |
| /***************************************************************************/ |
| |
| static irqreturn_t pit_tick(int irq, void *dummy) |
| { |
| struct clock_event_device *evt = &cf_pit_clockevent; |
| u16 pcsr; |
| |
| /* Reset the ColdFire timer */ |
| pcsr = __raw_readw(TA(MCFPIT_PCSR)); |
| __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR)); |
| |
| pit_cnt += PIT_CYCLES_PER_JIFFY; |
| evt->event_handler(evt); |
| return IRQ_HANDLED; |
| } |
| |
| /***************************************************************************/ |
| |
| static struct irqaction pit_irq = { |
| .name = "timer", |
| .flags = IRQF_DISABLED | IRQF_TIMER, |
| .handler = pit_tick, |
| }; |
| |
| /***************************************************************************/ |
| |
| static cycle_t pit_read_clk(struct clocksource *cs) |
| { |
| unsigned long flags; |
| u32 cycles; |
| u16 pcntr; |
| |
| local_irq_save(flags); |
| pcntr = __raw_readw(TA(MCFPIT_PCNTR)); |
| cycles = pit_cnt; |
| local_irq_restore(flags); |
| |
| return cycles + PIT_CYCLES_PER_JIFFY - pcntr; |
| } |
| |
| /***************************************************************************/ |
| |
| static struct clocksource pit_clk = { |
| .name = "pit", |
| .rating = 100, |
| .read = pit_read_clk, |
| .shift = 20, |
| .mask = CLOCKSOURCE_MASK(32), |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| /***************************************************************************/ |
| |
| void hw_timer_init(void) |
| { |
| u32 imr; |
| |
| cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id()); |
| cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32); |
| cf_pit_clockevent.max_delta_ns = |
| clockevent_delta2ns(0xFFFF, &cf_pit_clockevent); |
| cf_pit_clockevent.min_delta_ns = |
| clockevent_delta2ns(0x3f, &cf_pit_clockevent); |
| clockevents_register_device(&cf_pit_clockevent); |
| |
| setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq); |
| |
| __raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1); |
| imr = __raw_readl(INTC0 + MCFPIT_IMR); |
| imr &= ~MCFPIT_IMR_IBIT; |
| __raw_writel(imr, INTC0 + MCFPIT_IMR); |
| |
| pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift); |
| clocksource_register(&pit_clk); |
| } |
| |
| /***************************************************************************/ |