| /* |
| * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support |
| * |
| * Copyright (C) 2007 ARM Limited |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/init.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/hardware/cache-l2x0.h> |
| |
| #define CACHE_LINE_SIZE 32 |
| |
| static void __iomem *l2x0_base; |
| static DEFINE_SPINLOCK(l2x0_lock); |
| static uint32_t l2x0_way_mask; /* Bitmask of active ways */ |
| |
| static inline void cache_wait(void __iomem *reg, unsigned long mask) |
| { |
| /* wait for the operation to complete */ |
| while (readl(reg) & mask) |
| ; |
| } |
| |
| static inline void cache_sync(void) |
| { |
| void __iomem *base = l2x0_base; |
| writel(0, base + L2X0_CACHE_SYNC); |
| cache_wait(base + L2X0_CACHE_SYNC, 1); |
| } |
| |
| static inline void l2x0_clean_line(unsigned long addr) |
| { |
| void __iomem *base = l2x0_base; |
| cache_wait(base + L2X0_CLEAN_LINE_PA, 1); |
| writel(addr, base + L2X0_CLEAN_LINE_PA); |
| } |
| |
| static inline void l2x0_inv_line(unsigned long addr) |
| { |
| void __iomem *base = l2x0_base; |
| cache_wait(base + L2X0_INV_LINE_PA, 1); |
| writel(addr, base + L2X0_INV_LINE_PA); |
| } |
| |
| #ifdef CONFIG_PL310_ERRATA_588369 |
| static void debug_writel(unsigned long val) |
| { |
| extern void omap_smc1(u32 fn, u32 arg); |
| |
| /* |
| * Texas Instrument secure monitor api to modify the |
| * PL310 Debug Control Register. |
| */ |
| omap_smc1(0x100, val); |
| } |
| |
| static inline void l2x0_flush_line(unsigned long addr) |
| { |
| void __iomem *base = l2x0_base; |
| |
| /* Clean by PA followed by Invalidate by PA */ |
| cache_wait(base + L2X0_CLEAN_LINE_PA, 1); |
| writel(addr, base + L2X0_CLEAN_LINE_PA); |
| cache_wait(base + L2X0_INV_LINE_PA, 1); |
| writel(addr, base + L2X0_INV_LINE_PA); |
| } |
| #else |
| |
| /* Optimised out for non-errata case */ |
| static inline void debug_writel(unsigned long val) |
| { |
| } |
| |
| static inline void l2x0_flush_line(unsigned long addr) |
| { |
| void __iomem *base = l2x0_base; |
| cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); |
| writel(addr, base + L2X0_CLEAN_INV_LINE_PA); |
| } |
| #endif |
| |
| static void l2x0_cache_sync(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&l2x0_lock, flags); |
| cache_sync(); |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| } |
| |
| static inline void l2x0_inv_all(void) |
| { |
| unsigned long flags; |
| |
| /* invalidate all ways */ |
| spin_lock_irqsave(&l2x0_lock, flags); |
| writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); |
| cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); |
| cache_sync(); |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| } |
| |
| static void l2x0_inv_range(unsigned long start, unsigned long end) |
| { |
| void __iomem *base = l2x0_base; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&l2x0_lock, flags); |
| if (start & (CACHE_LINE_SIZE - 1)) { |
| start &= ~(CACHE_LINE_SIZE - 1); |
| debug_writel(0x03); |
| l2x0_flush_line(start); |
| debug_writel(0x00); |
| start += CACHE_LINE_SIZE; |
| } |
| |
| if (end & (CACHE_LINE_SIZE - 1)) { |
| end &= ~(CACHE_LINE_SIZE - 1); |
| debug_writel(0x03); |
| l2x0_flush_line(end); |
| debug_writel(0x00); |
| } |
| |
| while (start < end) { |
| unsigned long blk_end = start + min(end - start, 4096UL); |
| |
| while (start < blk_end) { |
| l2x0_inv_line(start); |
| start += CACHE_LINE_SIZE; |
| } |
| |
| if (blk_end < end) { |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| spin_lock_irqsave(&l2x0_lock, flags); |
| } |
| } |
| cache_wait(base + L2X0_INV_LINE_PA, 1); |
| cache_sync(); |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| } |
| |
| static void l2x0_clean_range(unsigned long start, unsigned long end) |
| { |
| void __iomem *base = l2x0_base; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&l2x0_lock, flags); |
| start &= ~(CACHE_LINE_SIZE - 1); |
| while (start < end) { |
| unsigned long blk_end = start + min(end - start, 4096UL); |
| |
| while (start < blk_end) { |
| l2x0_clean_line(start); |
| start += CACHE_LINE_SIZE; |
| } |
| |
| if (blk_end < end) { |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| spin_lock_irqsave(&l2x0_lock, flags); |
| } |
| } |
| cache_wait(base + L2X0_CLEAN_LINE_PA, 1); |
| cache_sync(); |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| } |
| |
| static void l2x0_flush_range(unsigned long start, unsigned long end) |
| { |
| void __iomem *base = l2x0_base; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&l2x0_lock, flags); |
| start &= ~(CACHE_LINE_SIZE - 1); |
| while (start < end) { |
| unsigned long blk_end = start + min(end - start, 4096UL); |
| |
| debug_writel(0x03); |
| while (start < blk_end) { |
| l2x0_flush_line(start); |
| start += CACHE_LINE_SIZE; |
| } |
| debug_writel(0x00); |
| |
| if (blk_end < end) { |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| spin_lock_irqsave(&l2x0_lock, flags); |
| } |
| } |
| cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1); |
| cache_sync(); |
| spin_unlock_irqrestore(&l2x0_lock, flags); |
| } |
| |
| void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) |
| { |
| __u32 aux; |
| __u32 cache_id; |
| int ways; |
| const char *type; |
| |
| l2x0_base = base; |
| |
| cache_id = readl(l2x0_base + L2X0_CACHE_ID); |
| aux = readl(l2x0_base + L2X0_AUX_CTRL); |
| |
| /* Determine the number of ways */ |
| switch (cache_id & L2X0_CACHE_ID_PART_MASK) { |
| case L2X0_CACHE_ID_PART_L310: |
| if (aux & (1 << 16)) |
| ways = 16; |
| else |
| ways = 8; |
| type = "L310"; |
| break; |
| case L2X0_CACHE_ID_PART_L210: |
| ways = (aux >> 13) & 0xf; |
| type = "L210"; |
| break; |
| default: |
| /* Assume unknown chips have 8 ways */ |
| ways = 8; |
| type = "L2x0 series"; |
| break; |
| } |
| |
| l2x0_way_mask = (1 << ways) - 1; |
| |
| /* |
| * Check if l2x0 controller is already enabled. |
| * If you are booting from non-secure mode |
| * accessing the below registers will fault. |
| */ |
| if (!(readl(l2x0_base + L2X0_CTRL) & 1)) { |
| |
| /* l2x0 controller is disabled */ |
| aux &= aux_mask; |
| aux |= aux_val; |
| writel(aux, l2x0_base + L2X0_AUX_CTRL); |
| |
| l2x0_inv_all(); |
| |
| /* enable L2X0 */ |
| writel(1, l2x0_base + L2X0_CTRL); |
| } |
| |
| outer_cache.inv_range = l2x0_inv_range; |
| outer_cache.clean_range = l2x0_clean_range; |
| outer_cache.flush_range = l2x0_flush_range; |
| outer_cache.sync = l2x0_cache_sync; |
| |
| printk(KERN_INFO "%s cache controller enabled\n", type); |
| printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x\n", |
| ways, cache_id, aux); |
| } |