| /* |
| * include/asm-s390/ccwdev.h |
| * include/asm-s390x/ccwdev.h |
| * |
| * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Arnd Bergmann <arndb@de.ibm.com> |
| * |
| * Interface for CCW device drivers |
| */ |
| #ifndef _S390_CCWDEV_H_ |
| #define _S390_CCWDEV_H_ |
| |
| #include <linux/device.h> |
| #include <linux/mod_devicetable.h> |
| |
| /* structs from asm/cio.h */ |
| struct irb; |
| struct ccw1; |
| |
| /* simplified initializers for struct ccw_device: |
| * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one |
| * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */ |
| #define CCW_DEVICE(cu, cum) \ |
| .cu_type=(cu), .cu_model=(cum), \ |
| .match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE \ |
| | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0)) |
| |
| #define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm) \ |
| .cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\ |
| .match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE \ |
| | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) \ |
| | CCW_DEVICE_ID_MATCH_DEVICE_TYPE \ |
| | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0) |
| |
| /* scan through an array of device ids and return the first |
| * entry that matches the device. |
| * |
| * the array must end with an entry containing zero match_flags |
| */ |
| static inline const struct ccw_device_id * |
| ccw_device_id_match(const struct ccw_device_id *array, |
| const struct ccw_device_id *match) |
| { |
| const struct ccw_device_id *id = array; |
| |
| for (id = array; id->match_flags; id++) { |
| if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE) |
| && (id->cu_type != match->cu_type)) |
| continue; |
| |
| if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL) |
| && (id->cu_model != match->cu_model)) |
| continue; |
| |
| if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE) |
| && (id->dev_type != match->dev_type)) |
| continue; |
| |
| if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL) |
| && (id->dev_model != match->dev_model)) |
| continue; |
| |
| return id; |
| } |
| |
| return 0; |
| } |
| |
| /* The struct ccw device is our replacement for the globally accessible |
| * ioinfo array. ioinfo will mutate into a subchannel device later. |
| * |
| * Reference: Documentation/s390/driver-model.txt */ |
| struct ccw_device { |
| spinlock_t *ccwlock; |
| struct ccw_device_private *private; /* cio private information */ |
| struct ccw_device_id id; /* id of this device, driver_info is |
| set by ccw_find_driver */ |
| struct ccw_driver *drv; /* */ |
| struct device dev; /* */ |
| int online; |
| /* This is sick, but a driver can have different interrupt handlers |
| for different ccw_devices (multi-subchannel drivers)... */ |
| void (*handler) (struct ccw_device *, unsigned long, struct irb *); |
| }; |
| |
| |
| /* Each ccw driver registers with the ccw root bus */ |
| struct ccw_driver { |
| struct module *owner; /* for automatic MOD_INC_USE_COUNT */ |
| struct ccw_device_id *ids; /* probe driver with these devs */ |
| int (*probe) (struct ccw_device *); /* ask driver to probe dev */ |
| void (*remove) (struct ccw_device *); |
| /* device is no longer available */ |
| int (*set_online) (struct ccw_device *); |
| int (*set_offline) (struct ccw_device *); |
| int (*notify) (struct ccw_device *, int); |
| struct device_driver driver; /* higher level structure, don't init |
| this from your driver */ |
| char *name; |
| }; |
| |
| extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv, |
| const char *bus_id); |
| |
| /* devices drivers call these during module load and unload. |
| * When a driver is registered, its probe method is called |
| * when new devices for its type pop up */ |
| extern int ccw_driver_register (struct ccw_driver *driver); |
| extern void ccw_driver_unregister (struct ccw_driver *driver); |
| |
| struct ccw1; |
| |
| extern int ccw_device_set_options(struct ccw_device *, unsigned long); |
| |
| /* Allow for i/o completion notification after primary interrupt status. */ |
| #define CCWDEV_EARLY_NOTIFICATION 0x0001 |
| /* Report all interrupt conditions. */ |
| #define CCWDEV_REPORT_ALL 0x0002 |
| /* Try to perform path grouping. */ |
| #define CCWDEV_DO_PATHGROUP 0x0004 |
| /* Allow forced onlining of boxed devices. */ |
| #define CCWDEV_ALLOW_FORCE 0x0008 |
| |
| /* |
| * ccw_device_start() |
| * |
| * Start a S/390 channel program. When the interrupt arrives, the |
| * IRQ handler is called, either immediately, delayed (dev-end missing, |
| * or sense required) or never (no IRQ handler registered). |
| * Depending on the action taken, ccw_device_start() returns: |
| * 0 - Success |
| * -EBUSY - Device busy, or status pending |
| * -ENODEV - Device not operational |
| * -EINVAL - Device invalid for operation |
| */ |
| extern int ccw_device_start(struct ccw_device *, struct ccw1 *, |
| unsigned long, __u8, unsigned long); |
| /* |
| * ccw_device_start_timeout() |
| * |
| * This function notifies the device driver if the channel program has not |
| * completed during the specified time. If a timeout occurs, the channel |
| * program is terminated via xsch(), hsch() or csch(). |
| */ |
| extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *, |
| unsigned long, __u8, unsigned long, int); |
| /* |
| * ccw_device_start_key() |
| * ccw_device_start_key_timeout() |
| * |
| * Same as ccw_device_start() and ccw_device_start_timeout(), except a |
| * storage key != default key can be provided for the I/O. |
| */ |
| extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *, |
| unsigned long, __u8, __u8, unsigned long); |
| extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *, |
| unsigned long, __u8, __u8, |
| unsigned long, int); |
| |
| |
| extern int ccw_device_resume(struct ccw_device *); |
| extern int ccw_device_halt(struct ccw_device *, unsigned long); |
| extern int ccw_device_clear(struct ccw_device *, unsigned long); |
| |
| extern int read_dev_chars(struct ccw_device *cdev, void **buffer, int length); |
| extern int read_conf_data(struct ccw_device *cdev, void **buffer, int *length); |
| extern int read_conf_data_lpm(struct ccw_device *cdev, void **buffer, |
| int *length, __u8 lpm); |
| |
| extern int ccw_device_set_online(struct ccw_device *cdev); |
| extern int ccw_device_set_offline(struct ccw_device *cdev); |
| |
| |
| extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd); |
| extern __u8 ccw_device_get_path_mask(struct ccw_device *); |
| |
| #define get_ccwdev_lock(x) (x)->ccwlock |
| |
| #define to_ccwdev(n) container_of(n, struct ccw_device, dev) |
| #define to_ccwdrv(n) container_of(n, struct ccw_driver, driver) |
| |
| extern struct ccw_device *ccw_device_probe_console(void); |
| |
| // FIXME: these have to go |
| extern int _ccw_device_get_device_number(struct ccw_device *); |
| extern int _ccw_device_get_subchannel_number(struct ccw_device *); |
| |
| extern void *ccw_device_get_chp_desc(struct ccw_device *, int); |
| #endif /* _S390_CCWDEV_H_ */ |