| #ifndef B43_PHY_H_ |
| #define B43_PHY_H_ |
| |
| #include <linux/types.h> |
| |
| struct b43_wldev; |
| struct b43_phy; |
| |
| /*** PHY Registers ***/ |
| |
| /* Routing */ |
| #define B43_PHYROUTE_OFDM_GPHY 0x400 |
| #define B43_PHYROUTE_EXT_GPHY 0x800 |
| |
| /* Base registers. */ |
| #define B43_PHY_BASE(reg) (reg) |
| /* OFDM (A) registers of a G-PHY */ |
| #define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) |
| /* Extended G-PHY registers */ |
| #define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) |
| |
| /* OFDM (A) PHY Registers */ |
| #define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */ |
| #define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */ |
| #define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */ |
| #define B43_PHY_BBANDCFG_RXANT_SHIFT 7 |
| #define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */ |
| #define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 */ |
| #define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */ |
| #define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */ |
| #define B43_PHY_CRS0 B43_PHY_OFDM(0x29) |
| #define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */ |
| #define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */ |
| #define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */ |
| #define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */ |
| #define B43_PHY_LMS B43_PHY_OFDM(0x55) |
| #define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */ |
| #define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */ |
| #define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */ |
| #define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */ |
| #define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */ |
| #define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */ |
| #define B43_PHY_OTABLENR_SHIFT 10 |
| #define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */ |
| #define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */ |
| #define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */ |
| #define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */ |
| #define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */ |
| #define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */ |
| #define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */ |
| #define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */ |
| #define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0) |
| #define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1) |
| #define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2) |
| #define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3) |
| #define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4) |
| #define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */ |
| #define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9) |
| #define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA) |
| #define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB) |
| #define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */ |
| #define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */ |
| #define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (rev 1 only) */ |
| #define B43_PHY_CRSTHRES2_R1 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (rev 1 only) */ |
| #define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */ |
| #define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */ |
| #define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */ |
| |
| /* CCK (B) PHY Registers */ |
| #define B43_PHY_VERSION_CCK B43_PHY_BASE(0x00) /* Versioning register for B-PHY */ |
| #define B43_PHY_CCKBBANDCFG B43_PHY_BASE(0x01) /* Contains antenna 0/1 control bit */ |
| #define B43_PHY_PGACTL B43_PHY_BASE(0x15) /* PGA control */ |
| #define B43_PHY_PGACTL_LPF 0x1000 /* Low pass filter (?) */ |
| #define B43_PHY_PGACTL_LOWBANDW 0x0040 /* Low bandwidth flag */ |
| #define B43_PHY_PGACTL_UNKNOWN 0xEFA0 |
| #define B43_PHY_FBCTL1 B43_PHY_BASE(0x18) /* Frequency bandwidth control 1 */ |
| #define B43_PHY_ITSSI B43_PHY_BASE(0x29) /* Idle TSSI */ |
| #define B43_PHY_LO_LEAKAGE B43_PHY_BASE(0x2D) /* Measured LO leakage */ |
| #define B43_PHY_ENERGY B43_PHY_BASE(0x33) /* Energy */ |
| #define B43_PHY_SYNCCTL B43_PHY_BASE(0x35) |
| #define B43_PHY_FBCTL2 B43_PHY_BASE(0x38) /* Frequency bandwidth control 2 */ |
| #define B43_PHY_DACCTL B43_PHY_BASE(0x60) /* DAC control */ |
| #define B43_PHY_RCCALOVER B43_PHY_BASE(0x78) /* RC calibration override */ |
| |
| /* Extended G-PHY Registers */ |
| #define B43_PHY_CLASSCTL B43_PHY_EXTG(0x02) /* Classify control */ |
| #define B43_PHY_GTABCTL B43_PHY_EXTG(0x03) /* G-PHY table control (see below) */ |
| #define B43_PHY_GTABOFF 0x03FF /* G-PHY table offset (see below) */ |
| #define B43_PHY_GTABNR 0xFC00 /* G-PHY table number (see below) */ |
| #define B43_PHY_GTABNR_SHIFT 10 |
| #define B43_PHY_GTABDATA B43_PHY_EXTG(0x04) /* G-PHY table data */ |
| #define B43_PHY_LO_MASK B43_PHY_EXTG(0x0F) /* Local Oscillator control mask */ |
| #define B43_PHY_LO_CTL B43_PHY_EXTG(0x10) /* Local Oscillator control */ |
| #define B43_PHY_RFOVER B43_PHY_EXTG(0x11) /* RF override */ |
| #define B43_PHY_RFOVERVAL B43_PHY_EXTG(0x12) /* RF override value */ |
| #define B43_PHY_RFOVERVAL_EXTLNA 0x8000 |
| #define B43_PHY_RFOVERVAL_LNA 0x7000 |
| #define B43_PHY_RFOVERVAL_LNA_SHIFT 12 |
| #define B43_PHY_RFOVERVAL_PGA 0x0F00 |
| #define B43_PHY_RFOVERVAL_PGA_SHIFT 8 |
| #define B43_PHY_RFOVERVAL_UNK 0x0010 /* Unknown, always set. */ |
| #define B43_PHY_RFOVERVAL_TRSWRX 0x00E0 |
| #define B43_PHY_RFOVERVAL_BW 0x0003 /* Bandwidth flags */ |
| #define B43_PHY_RFOVERVAL_BW_LPF 0x0001 /* Low Pass Filter */ |
| #define B43_PHY_RFOVERVAL_BW_LBW 0x0002 /* Low Bandwidth (when set), high when unset */ |
| #define B43_PHY_ANALOGOVER B43_PHY_EXTG(0x14) /* Analog override */ |
| #define B43_PHY_ANALOGOVERVAL B43_PHY_EXTG(0x15) /* Analog override value */ |
| |
| /*** OFDM table numbers ***/ |
| #define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset)) |
| #define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0) |
| #define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0) |
| #define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename |
| #define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4) |
| #define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0) |
| #define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3) |
| #define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0) |
| #define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0) |
| #define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0) |
| #define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0) |
| #define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0) |
| #define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0) |
| #define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0) |
| #define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0) |
| #define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7) |
| #define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12) |
| #define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13) |
| //TODO |
| #define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12) |
| #define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0) |
| //TODO |
| #define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0) |
| #define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO rename |
| #define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 1) |
| #define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0) |
| #define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4) |
| #define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0) |
| #define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0) |
| #define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0) |
| #define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0) |
| |
| u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset); |
| void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table, |
| u16 offset, u16 value); |
| u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset); |
| void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table, |
| u16 offset, u32 value); |
| |
| /*** G-PHY table numbers */ |
| #define B43_GTAB(number, offset) (((number) << B43_PHY_GTABNR_SHIFT) | (offset)) |
| #define B43_GTAB_NRSSI B43_GTAB(0x00, 0) |
| #define B43_GTAB_TRFEMW B43_GTAB(0x0C, 0x120) |
| #define B43_GTAB_ORIGTR B43_GTAB(0x2E, 0x298) |
| |
| u16 b43_gtab_read(struct b43_wldev *dev, u16 table, u16 offset); //TODO implement |
| void b43_gtab_write(struct b43_wldev *dev, u16 table, u16 offset, u16 value); //TODO implement |
| |
| #define B43_DEFAULT_CHANNEL_A 36 |
| #define B43_DEFAULT_CHANNEL_BG 6 |
| |
| enum { |
| B43_ANTENNA0, /* Antenna 0 */ |
| B43_ANTENNA1, /* Antenna 0 */ |
| B43_ANTENNA_AUTO1, /* Automatic, starting with antenna 1 */ |
| B43_ANTENNA_AUTO0, /* Automatic, starting with antenna 0 */ |
| |
| B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, |
| B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, |
| }; |
| |
| enum { |
| B43_INTERFMODE_NONE, |
| B43_INTERFMODE_NONWLAN, |
| B43_INTERFMODE_MANUALWLAN, |
| B43_INTERFMODE_AUTOWLAN, |
| }; |
| |
| /* Masks for the different PHY versioning registers. */ |
| #define B43_PHYVER_ANALOG 0xF000 |
| #define B43_PHYVER_ANALOG_SHIFT 12 |
| #define B43_PHYVER_TYPE 0x0F00 |
| #define B43_PHYVER_TYPE_SHIFT 8 |
| #define B43_PHYVER_VERSION 0x00FF |
| |
| void b43_raw_phy_lock(struct b43_wldev *dev); |
| #define b43_phy_lock(dev, flags) \ |
| do { \ |
| local_irq_save(flags); \ |
| b43_raw_phy_lock(dev); \ |
| } while (0) |
| void b43_raw_phy_unlock(struct b43_wldev *dev); |
| #define b43_phy_unlock(dev, flags) \ |
| do { \ |
| b43_raw_phy_unlock(dev); \ |
| local_irq_restore(flags); \ |
| } while (0) |
| |
| u16 b43_phy_read(struct b43_wldev *dev, u16 offset); |
| void b43_phy_write(struct b43_wldev *dev, u16 offset, u16 val); |
| |
| int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev); |
| |
| void b43_phy_early_init(struct b43_wldev *dev); |
| int b43_phy_init(struct b43_wldev *dev); |
| |
| void b43_set_rx_antenna(struct b43_wldev *dev, int antenna); |
| |
| void b43_phy_xmitpower(struct b43_wldev *dev); |
| void b43_gphy_dc_lt_init(struct b43_wldev *dev); |
| |
| /* Returns the boolean whether the board has HardwarePowerControl */ |
| bool b43_has_hardware_pctl(struct b43_phy *phy); |
| /* Returns the boolean whether "TX Magnification" is enabled. */ |
| #define has_tx_magnification(phy) \ |
| (((phy)->rev >= 2) && \ |
| ((phy)->radio_ver == 0x2050) && \ |
| ((phy)->radio_rev == 8)) |
| /* Card uses the loopback gain stuff */ |
| #define has_loopback_gain(phy) \ |
| (((phy)->rev > 1) || ((phy)->gmode)) |
| |
| /* Radio Attenuation (RF Attenuation) */ |
| struct b43_rfatt { |
| u8 att; /* Attenuation value */ |
| bool with_padmix; /* Flag, PAD Mixer enabled. */ |
| }; |
| struct b43_rfatt_list { |
| /* Attenuation values list */ |
| const struct b43_rfatt *list; |
| u8 len; |
| /* Minimum/Maximum attenuation values */ |
| u8 min_val; |
| u8 max_val; |
| }; |
| |
| /* Baseband Attenuation */ |
| struct b43_bbatt { |
| u8 att; /* Attenuation value */ |
| }; |
| struct b43_bbatt_list { |
| /* Attenuation values list */ |
| const struct b43_bbatt *list; |
| u8 len; |
| /* Minimum/Maximum attenuation values */ |
| u8 min_val; |
| u8 max_val; |
| }; |
| |
| /* tx_control bits. */ |
| #define B43_TXCTL_PA3DB 0x40 /* PA Gain 3dB */ |
| #define B43_TXCTL_PA2DB 0x20 /* PA Gain 2dB */ |
| #define B43_TXCTL_TXMIX 0x10 /* TX Mixer Gain */ |
| |
| /* Write BasebandAttenuation value to the device. */ |
| void b43_phy_set_baseband_attenuation(struct b43_wldev *dev, |
| u16 baseband_attenuation); |
| |
| extern const u8 b43_radio_channel_codes_bg[]; |
| |
| void b43_radio_lock(struct b43_wldev *dev); |
| void b43_radio_unlock(struct b43_wldev *dev); |
| |
| u16 b43_radio_read16(struct b43_wldev *dev, u16 offset); |
| void b43_radio_write16(struct b43_wldev *dev, u16 offset, u16 val); |
| |
| u16 b43_radio_init2050(struct b43_wldev *dev); |
| void b43_radio_init2060(struct b43_wldev *dev); |
| |
| void b43_radio_turn_on(struct b43_wldev *dev); |
| void b43_radio_turn_off(struct b43_wldev *dev, bool force); |
| |
| int b43_radio_selectchannel(struct b43_wldev *dev, u8 channel, |
| int synthetic_pu_workaround); |
| |
| u8 b43_radio_aci_detect(struct b43_wldev *dev, u8 channel); |
| u8 b43_radio_aci_scan(struct b43_wldev *dev); |
| |
| int b43_radio_set_interference_mitigation(struct b43_wldev *dev, int mode); |
| |
| void b43_calc_nrssi_slope(struct b43_wldev *dev); |
| void b43_calc_nrssi_threshold(struct b43_wldev *dev); |
| s16 b43_nrssi_hw_read(struct b43_wldev *dev, u16 offset); |
| void b43_nrssi_hw_write(struct b43_wldev *dev, u16 offset, s16 val); |
| void b43_nrssi_hw_update(struct b43_wldev *dev, u16 val); |
| void b43_nrssi_mem_update(struct b43_wldev *dev); |
| |
| void b43_radio_set_tx_iq(struct b43_wldev *dev); |
| u16 b43_radio_calibrationvalue(struct b43_wldev *dev); |
| |
| void b43_put_attenuation_into_ranges(struct b43_wldev *dev, |
| int *_bbatt, int *_rfatt); |
| |
| void b43_set_txpower_g(struct b43_wldev *dev, |
| const struct b43_bbatt *bbatt, |
| const struct b43_rfatt *rfatt, u8 tx_control); |
| |
| #endif /* B43_PHY_H_ */ |