| /****************************************************************************** |
| * |
| * Copyright(c) 2009-2010 Realtek Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called LICENSE. |
| * |
| * Contact Information: |
| * wlanfae <wlanfae@realtek.com> |
| * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, |
| * Hsinchu 300, Taiwan. |
| * |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * |
| *****************************************************************************/ |
| |
| #include "../wifi.h" |
| #include "../pci.h" |
| #include "reg.h" |
| #include "led.h" |
| |
| static void _rtl92ce_init_led(struct ieee80211_hw *hw, |
| struct rtl_led *pled, enum rtl_led_pin ledpin) |
| { |
| pled->hw = hw; |
| pled->ledpin = ledpin; |
| pled->ledon = false; |
| } |
| |
| void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled) |
| { |
| u8 ledcfg; |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| |
| RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, |
| ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin)); |
| |
| switch (pled->ledpin) { |
| case LED_PIN_GPIO0: |
| break; |
| case LED_PIN_LED0: |
| ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2); |
| |
| if ((rtlpriv->efuse.eeprom_did == 0x8176) || |
| (rtlpriv->efuse.eeprom_did == 0x8193)) |
| /* BIT7 of REG_LEDCFG2 should be set to |
| * make sure we could emit the led2. */ |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) | |
| BIT(7) | BIT(5) | BIT(6)); |
| else |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) | |
| BIT(7) | BIT(5)); |
| break; |
| case LED_PIN_LED1: |
| ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG1); |
| |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5)); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("switch case not process\n")); |
| break; |
| } |
| pled->ledon = true; |
| } |
| |
| void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| u8 ledcfg; |
| |
| RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, |
| ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin)); |
| |
| ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2); |
| |
| switch (pled->ledpin) { |
| case LED_PIN_GPIO0: |
| break; |
| case LED_PIN_LED0: |
| ledcfg &= 0xf0; |
| if (pcipriv->ledctl.led_opendrain) |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, |
| (ledcfg | BIT(1) | BIT(5) | BIT(6))); |
| else |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, |
| (ledcfg | BIT(3) | BIT(5) | BIT(6))); |
| break; |
| case LED_PIN_LED1: |
| ledcfg &= 0x0f; |
| rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3))); |
| break; |
| default: |
| RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, |
| ("switch case not process\n")); |
| break; |
| } |
| pled->ledon = false; |
| } |
| |
| void rtl92de_init_sw_leds(struct ieee80211_hw *hw) |
| { |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| _rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led0), LED_PIN_LED0); |
| _rtl92ce_init_led(hw, &(pcipriv->ledctl.sw_led1), LED_PIN_LED1); |
| } |
| |
| static void _rtl92ce_sw_led_control(struct ieee80211_hw *hw, |
| enum led_ctl_mode ledaction) |
| { |
| struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); |
| struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); |
| switch (ledaction) { |
| case LED_CTL_POWER_ON: |
| case LED_CTL_LINK: |
| case LED_CTL_NO_LINK: |
| rtl92de_sw_led_on(hw, pLed0); |
| break; |
| case LED_CTL_POWER_OFF: |
| rtl92de_sw_led_off(hw, pLed0); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void rtl92de_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction) |
| { |
| struct rtl_priv *rtlpriv = rtl_priv(hw); |
| struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); |
| |
| if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) && |
| (ledaction == LED_CTL_TX || |
| ledaction == LED_CTL_RX || |
| ledaction == LED_CTL_SITE_SURVEY || |
| ledaction == LED_CTL_LINK || |
| ledaction == LED_CTL_NO_LINK || |
| ledaction == LED_CTL_START_TO_LINK || |
| ledaction == LED_CTL_POWER_ON)) { |
| return; |
| } |
| RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n", ledaction)); |
| |
| _rtl92ce_sw_led_control(hw, ledaction); |
| } |