| /* |
| * Modifications by Christian Pellegrin <chripell@evolware.org> |
| * |
| * s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver |
| * |
| * Copyright 2007 Dension Audio Systems Ltd. |
| * Author: Zoltan Devai |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <linux/mutex.h> |
| #include <linux/gpio.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/s3c24xx_uda134x.h> |
| #include <sound/uda134x.h> |
| |
| #include <plat/regs-iis.h> |
| |
| #include "s3c-dma.h" |
| #include "s3c24xx-i2s.h" |
| #include "../codecs/uda134x.h" |
| |
| |
| /* #define ENFORCE_RATES 1 */ |
| /* |
| Unfortunately the S3C24XX in master mode has a limited capacity of |
| generating the clock for the codec. If you define this only rates |
| that are really available will be enforced. But be careful, most |
| user level application just want the usual sampling frequencies (8, |
| 11.025, 22.050, 44.1 kHz) and anyway resampling is a costly |
| operation for embedded systems. So if you aren't very lucky or your |
| hardware engineer wasn't very forward-looking it's better to leave |
| this undefined. If you do so an approximate value for the requested |
| sampling rate in the range -/+ 5% will be chosen. If this in not |
| possible an error will be returned. |
| */ |
| |
| static struct clk *xtal; |
| static struct clk *pclk; |
| /* this is need because we don't have a place where to keep the |
| * pointers to the clocks in each substream. We get the clocks only |
| * when we are actually using them so we don't block stuff like |
| * frequency change or oscillator power-off */ |
| static int clk_users; |
| static DEFINE_MUTEX(clk_lock); |
| |
| static unsigned int rates[33 * 2]; |
| #ifdef ENFORCE_RATES |
| static struct snd_pcm_hw_constraint_list hw_constraints_rates = { |
| .count = ARRAY_SIZE(rates), |
| .list = rates, |
| .mask = 0, |
| }; |
| #endif |
| |
| static struct platform_device *s3c24xx_uda134x_snd_device; |
| |
| static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) |
| { |
| int ret = 0; |
| #ifdef ENFORCE_RATES |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| #endif |
| |
| mutex_lock(&clk_lock); |
| pr_debug("%s %d\n", __func__, clk_users); |
| if (clk_users == 0) { |
| xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal"); |
| if (!xtal) { |
| printk(KERN_ERR "%s cannot get xtal\n", __func__); |
| ret = -EBUSY; |
| } else { |
| pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, |
| "pclk"); |
| if (!pclk) { |
| printk(KERN_ERR "%s cannot get pclk\n", |
| __func__); |
| clk_put(xtal); |
| ret = -EBUSY; |
| } |
| } |
| if (!ret) { |
| int i, j; |
| |
| for (i = 0; i < 2; i++) { |
| int fs = i ? 256 : 384; |
| |
| rates[i*33] = clk_get_rate(xtal) / fs; |
| for (j = 1; j < 33; j++) |
| rates[i*33 + j] = clk_get_rate(pclk) / |
| (j * fs); |
| } |
| } |
| } |
| clk_users += 1; |
| mutex_unlock(&clk_lock); |
| if (!ret) { |
| #ifdef ENFORCE_RATES |
| ret = snd_pcm_hw_constraint_list(runtime, 0, |
| SNDRV_PCM_HW_PARAM_RATE, |
| &hw_constraints_rates); |
| if (ret < 0) |
| printk(KERN_ERR "%s cannot set constraints\n", |
| __func__); |
| #endif |
| } |
| return ret; |
| } |
| |
| static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream) |
| { |
| mutex_lock(&clk_lock); |
| pr_debug("%s %d\n", __func__, clk_users); |
| clk_users -= 1; |
| if (clk_users == 0) { |
| clk_put(xtal); |
| xtal = NULL; |
| clk_put(pclk); |
| pclk = NULL; |
| } |
| mutex_unlock(&clk_lock); |
| } |
| |
| static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; |
| struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; |
| unsigned int clk = 0; |
| int ret = 0; |
| int clk_source, fs_mode; |
| unsigned long rate = params_rate(params); |
| long err, cerr; |
| unsigned int div; |
| int i, bi; |
| |
| err = 999999; |
| bi = 0; |
| for (i = 0; i < 2*33; i++) { |
| cerr = rates[i] - rate; |
| if (cerr < 0) |
| cerr = -cerr; |
| if (cerr < err) { |
| err = cerr; |
| bi = i; |
| } |
| } |
| if (bi / 33 == 1) |
| fs_mode = S3C2410_IISMOD_256FS; |
| else |
| fs_mode = S3C2410_IISMOD_384FS; |
| if (bi % 33 == 0) { |
| clk_source = S3C24XX_CLKSRC_MPLL; |
| div = 1; |
| } else { |
| clk_source = S3C24XX_CLKSRC_PCLK; |
| div = bi % 33; |
| } |
| pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi); |
| |
| clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate; |
| pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__, |
| fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS", |
| clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK", |
| div, clk, err); |
| |
| if ((err * 100 / rate) > 5) { |
| printk(KERN_ERR "S3C24XX_UDA134X: effective frequency " |
| "too different from desired (%ld%%)\n", |
| err * 100 / rate); |
| return -EINVAL; |
| } |
| |
| ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | |
| SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk, |
| SND_SOC_CLOCK_IN); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK, |
| S3C2410_IISMOD_32FS); |
| if (ret < 0) |
| return ret; |
| |
| ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, |
| S3C24XX_PRESCALE(div, div)); |
| if (ret < 0) |
| return ret; |
| |
| /* set the codec system clock for DAC and ADC */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, |
| SND_SOC_CLOCK_OUT); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct snd_soc_ops s3c24xx_uda134x_ops = { |
| .startup = s3c24xx_uda134x_startup, |
| .shutdown = s3c24xx_uda134x_shutdown, |
| .hw_params = s3c24xx_uda134x_hw_params, |
| }; |
| |
| static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = { |
| .name = "UDA134X", |
| .stream_name = "UDA134X", |
| .codec_dai = &uda134x_dai, |
| .cpu_dai = &s3c24xx_i2s_dai, |
| .ops = &s3c24xx_uda134x_ops, |
| }; |
| |
| static struct snd_soc_card snd_soc_s3c24xx_uda134x = { |
| .name = "S3C24XX_UDA134X", |
| .platform = &s3c24xx_soc_platform, |
| .dai_link = &s3c24xx_uda134x_dai_link, |
| .num_links = 1, |
| }; |
| |
| static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins; |
| |
| static void setdat(int v) |
| { |
| gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0); |
| } |
| |
| static void setclk(int v) |
| { |
| gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0); |
| } |
| |
| static void setmode(int v) |
| { |
| gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0); |
| } |
| |
| static struct uda134x_platform_data s3c24xx_uda134x = { |
| .l3 = { |
| .setdat = setdat, |
| .setclk = setclk, |
| .setmode = setmode, |
| .data_hold = 1, |
| .data_setup = 1, |
| .clock_high = 1, |
| .mode_hold = 1, |
| .mode = 1, |
| .mode_setup = 1, |
| }, |
| }; |
| |
| static struct snd_soc_device s3c24xx_uda134x_snd_devdata = { |
| .card = &snd_soc_s3c24xx_uda134x, |
| .codec_dev = &soc_codec_dev_uda134x, |
| .codec_data = &s3c24xx_uda134x, |
| }; |
| |
| static int s3c24xx_uda134x_setup_pin(int pin, char *fun) |
| { |
| if (gpio_request(pin, "s3c24xx_uda134x") < 0) { |
| printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " |
| "l3 %s pin already in use", fun); |
| return -EBUSY; |
| } |
| gpio_direction_output(pin, 0); |
| return 0; |
| } |
| |
| static int s3c24xx_uda134x_probe(struct platform_device *pdev) |
| { |
| int ret; |
| |
| printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n"); |
| |
| s3c24xx_uda134x_l3_pins = pdev->dev.platform_data; |
| if (s3c24xx_uda134x_l3_pins == NULL) { |
| printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " |
| "unable to find platform data\n"); |
| return -ENODEV; |
| } |
| s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power; |
| s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model; |
| |
| if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data, |
| "data") < 0) |
| return -EBUSY; |
| if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk, |
| "clk") < 0) { |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_data); |
| return -EBUSY; |
| } |
| if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode, |
| "mode") < 0) { |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_data); |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); |
| return -EBUSY; |
| } |
| |
| s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1); |
| if (!s3c24xx_uda134x_snd_device) { |
| printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: " |
| "Unable to register\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(s3c24xx_uda134x_snd_device, |
| &s3c24xx_uda134x_snd_devdata); |
| s3c24xx_uda134x_snd_devdata.dev = &s3c24xx_uda134x_snd_device->dev; |
| ret = platform_device_add(s3c24xx_uda134x_snd_device); |
| if (ret) { |
| printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n"); |
| platform_device_put(s3c24xx_uda134x_snd_device); |
| } |
| |
| return ret; |
| } |
| |
| static int s3c24xx_uda134x_remove(struct platform_device *pdev) |
| { |
| platform_device_unregister(s3c24xx_uda134x_snd_device); |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_data); |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_clk); |
| gpio_free(s3c24xx_uda134x_l3_pins->l3_mode); |
| return 0; |
| } |
| |
| static struct platform_driver s3c24xx_uda134x_driver = { |
| .probe = s3c24xx_uda134x_probe, |
| .remove = s3c24xx_uda134x_remove, |
| .driver = { |
| .name = "s3c24xx_uda134x", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init s3c24xx_uda134x_init(void) |
| { |
| return platform_driver_register(&s3c24xx_uda134x_driver); |
| } |
| |
| static void __exit s3c24xx_uda134x_exit(void) |
| { |
| platform_driver_unregister(&s3c24xx_uda134x_driver); |
| } |
| |
| |
| module_init(s3c24xx_uda134x_init); |
| module_exit(s3c24xx_uda134x_exit); |
| |
| MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>"); |
| MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver"); |
| MODULE_LICENSE("GPL"); |