blob: 2278677bac174e538dd9912d1f8647c99490267e [file] [log] [blame]
/* Copyright (c) 2010-2011,2013-2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ARCH_ARM_MACH_MSM_GPIOMUX_H
#define __ARCH_ARM_MACH_MSM_GPIOMUX_H
#include <linux/bitops.h>
#include <linux/errno.h>
enum msm_gpiomux_setting {
GPIOMUX_ACTIVE = 0,
GPIOMUX_SUSPENDED,
GPIOMUX_NSETTINGS
};
enum gpiomux_drv {
GPIOMUX_DRV_2MA = 0,
GPIOMUX_DRV_4MA,
GPIOMUX_DRV_6MA,
GPIOMUX_DRV_8MA,
GPIOMUX_DRV_10MA,
GPIOMUX_DRV_12MA,
GPIOMUX_DRV_14MA,
GPIOMUX_DRV_16MA,
};
enum gpiomux_func {
GPIOMUX_FUNC_GPIO = 0,
GPIOMUX_FUNC_1,
GPIOMUX_FUNC_2,
GPIOMUX_FUNC_3,
GPIOMUX_FUNC_4,
GPIOMUX_FUNC_5,
GPIOMUX_FUNC_6,
GPIOMUX_FUNC_7,
GPIOMUX_FUNC_8,
GPIOMUX_FUNC_9,
GPIOMUX_FUNC_A,
GPIOMUX_FUNC_B,
GPIOMUX_FUNC_C,
GPIOMUX_FUNC_D,
GPIOMUX_FUNC_E,
GPIOMUX_FUNC_F,
};
enum gpiomux_pull {
GPIOMUX_PULL_NONE = 0,
GPIOMUX_PULL_DOWN,
GPIOMUX_PULL_KEEPER,
GPIOMUX_PULL_UP,
};
/* Direction settings are only meaningful when GPIOMUX_FUNC_GPIO is selected.
* This element is ignored for all other FUNC selections, as the output-
* enable pin is not under software control in those cases. See the SWI
* for your target for more details.
*/
enum gpiomux_dir {
GPIOMUX_IN = 0,
GPIOMUX_OUT_HIGH,
GPIOMUX_OUT_LOW,
};
struct gpiomux_setting {
enum gpiomux_func func;
enum gpiomux_drv drv;
enum gpiomux_pull pull;
enum gpiomux_dir dir;
};
/**
* struct msm_gpiomux_config: gpiomux settings for one gpio line.
*
* A complete gpiomux config is the combination of a drive-strength,
* function, pull, and (sometimes) direction. For functions other than GPIO,
* the input/output setting is hard-wired according to the function.
*
* @gpio: The index number of the gpio being described.
* @settings: The settings to be installed, specifically:
* GPIOMUX_ACTIVE: The setting to be installed when the
* line is active, or its reference count is > 0.
* GPIOMUX_SUSPENDED: The setting to be installed when
* the line is suspended, or its reference count is 0.
*/
struct msm_gpiomux_config {
unsigned gpio;
struct gpiomux_setting *settings[GPIOMUX_NSETTINGS];
};
/**
* struct msm_gpiomux_configs: a collection of gpiomux configs.
*
* It is so common to manage blocks of gpiomux configs that the data structure
* for doing so has been standardized here as a convenience.
*
* @cfg: A pointer to the first config in an array of configs.
* @ncfg: The number of configs in the array.
*/
struct msm_gpiomux_configs {
struct msm_gpiomux_config *cfg;
size_t ncfg;
};
/* Provide an enum and an API to write to misc TLMM registers */
enum msm_tlmm_misc_reg {
TLMM_ETM_MODE_REG = 0x2014,
TLMM_SDC2_HDRV_PULL_CTL = 0x2048,
TLMM_SPARE_REG = 0x2024,
TLMM_CDC_HDRV_CTL = 0x2054,
TLMM_CDC_HDRV_PULL_CTL = 0x2058,
};
#ifdef CONFIG_MSM_GPIOMUX
/* Before using gpiomux, initialize the subsystem by telling it how many
* gpios are going to be managed. Calling any other gpiomux functions before
* msm_gpiomux_init is unsupported.
*/
int msm_gpiomux_init(size_t ngpio);
/* DT Variant of msm_gpiomux_init. This will look up the number of gpios from
* device tree rather than relying on NR_GPIO_IRQS
*/
int msm_gpiomux_init_dt(void);
/* Install a block of gpiomux configurations in gpiomux. This is functionally
* identical to calling msm_gpiomux_write many times.
*/
void msm_gpiomux_install(struct msm_gpiomux_config *configs, unsigned nconfigs);
/* Install a block of gpiomux configurations in gpiomux. Do not however write
* to hardware. Just store the settings to be retrieved at a later time
*/
void msm_gpiomux_install_nowrite(struct msm_gpiomux_config *configs,
unsigned nconfigs);
/* Increment a gpio's reference count, possibly activating the line. */
int __must_check msm_gpiomux_get(unsigned gpio);
/* Decrement a gpio's reference count, possibly suspending the line. */
int msm_gpiomux_put(unsigned gpio);
/* Install a new setting in a gpio. To erase a slot, use NULL.
* The old setting that was overwritten can be passed back to the caller
* old_setting can be NULL if the caller is not interested in the previous
* setting
* If a previous setting was not available to return (NULL configuration)
* - the function returns 1
* else function returns 0
*/
int msm_gpiomux_write(unsigned gpio, enum msm_gpiomux_setting which,
struct gpiomux_setting *setting, struct gpiomux_setting *old_setting);
/* Architecture-internal function for use by the framework only.
* This function can assume the following:
* - the gpio value has passed a bounds-check
* - the gpiomux spinlock has been obtained
*
* This function is not for public consumption. External users
* should use msm_gpiomux_write.
*/
void __msm_gpiomux_write(unsigned gpio, struct gpiomux_setting val);
/* Functions that provide an API for drivers to read from and write to
* miscellaneous TLMM registers.
*/
int msm_tlmm_misc_reg_read(enum msm_tlmm_misc_reg misc_reg);
void msm_tlmm_misc_reg_write(enum msm_tlmm_misc_reg misc_reg, int val);
#else
static inline int msm_gpiomux_init(size_t ngpio)
{
return -ENOSYS;
}
static inline void
msm_gpiomux_install(struct msm_gpiomux_config *configs, unsigned nconfigs) {}
static inline int __must_check msm_gpiomux_get(unsigned gpio)
{
return -ENOSYS;
}
static inline int msm_gpiomux_put(unsigned gpio)
{
return -ENOSYS;
}
static inline int msm_gpiomux_write(unsigned gpio,
enum msm_gpiomux_setting which, struct gpiomux_setting *setting,
struct gpiomux_setting *old_setting)
{
return -ENOSYS;
}
static inline int msm_tlmm_misc_reg_read(enum msm_tlmm_misc_reg misc_reg)
{
return -ENOSYS;
}
static inline void msm_tlmm_misc_reg_write(enum msm_tlmm_misc_reg misc_reg,
int val)
{
}
#endif
#endif