usb: dwc3: ep0: implement Set SEL support
This patch implements Set SEL Standard Request
support for dwc3 driver. It needs to issue a command
to the controller passing the timing we received on
the data phase of the Set SEL request.
Change-Id: Ieb1ffb9ccd49523d90dfbcc81c3a96187b28ac2e
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4889458..2950b6a 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -493,6 +493,85 @@
return ret;
}
+static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
+{
+ struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+
+ u32 param = 0;
+ u32 reg;
+
+ struct timing {
+ u8 u1sel;
+ u8 u1pel;
+ u16 u2sel;
+ u16 u2pel;
+ } __packed timing;
+
+ int ret;
+
+ memcpy(&timing, req->buf, sizeof(timing));
+
+ dwc->u1sel = timing.u1sel;
+ dwc->u1pel = timing.u1pel;
+ dwc->u2sel = timing.u2sel;
+ dwc->u2pel = timing.u2pel;
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (reg & DWC3_DCTL_INITU2ENA)
+ param = dwc->u2pel;
+ if (reg & DWC3_DCTL_INITU1ENA)
+ param = dwc->u1pel;
+
+ /*
+ * According to Synopsys Databook, if parameter is
+ * greater than 125, a value of zero should be
+ * programmed in the register.
+ */
+ if (param > 125)
+ param = 0;
+
+ /* now that we have the time, issue DGCMD Set Sel */
+ ret = dwc3_send_gadget_generic_command(dwc,
+ DWC3_DGCMD_SET_PERIODIC_PAR, param);
+ WARN_ON(ret < 0);
+}
+
+static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
+{
+ struct dwc3_ep *dep;
+ u16 wLength;
+ u16 wValue;
+
+ if (dwc->dev_state == DWC3_DEFAULT_STATE)
+ return -EINVAL;
+
+ wValue = le16_to_cpu(ctrl->wValue);
+ wLength = le16_to_cpu(ctrl->wLength);
+
+ if (wLength != 6) {
+ dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
+ wLength);
+ return -EINVAL;
+ }
+
+ /*
+ * To handle Set SEL we need to receive 6 bytes from Host. So let's
+ * queue a usb_request for 6 bytes.
+ *
+ * Remember, though, this controller can't handle non-wMaxPacketSize
+ * aligned transfers on the OUT direction, so we queue a request for
+ * wMaxPacketSize instead.
+ */
+ dep = dwc->eps[0];
+ dwc->ep0_usb_req.dep = dep;
+ dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
+ dwc->ep0_usb_req.request.buf = dwc->setup_buf;
+ dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
+
+ return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
+}
+
static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
{
int ret;
@@ -518,6 +597,10 @@
dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
ret = dwc3_ep0_set_config(dwc, ctrl);
break;
+ case USB_REQ_SET_SEL:
+ dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n");
+ ret = dwc3_ep0_set_sel(dwc, ctrl);
+ break;
default:
dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
ret = dwc3_ep0_delegate_req(dwc, ctrl);