| /* |
| * Support for dynamic reconfiguration for PCI, Memory, and CPU |
| * Hotplug and Dynamic Logical Partitioning on RPA platforms. |
| * |
| * Copyright (C) 2009 Nathan Fontenot |
| * Copyright (C) 2009 IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/kref.h> |
| #include <linux/notifier.h> |
| #include <linux/proc_fs.h> |
| #include <linux/spinlock.h> |
| #include <linux/cpu.h> |
| #include <linux/slab.h> |
| #include "offline_states.h" |
| |
| #include <asm/prom.h> |
| #include <asm/machdep.h> |
| #include <asm/uaccess.h> |
| #include <asm/rtas.h> |
| #include <asm/pSeries_reconfig.h> |
| |
| struct cc_workarea { |
| u32 drc_index; |
| u32 zero; |
| u32 name_offset; |
| u32 prop_length; |
| u32 prop_offset; |
| }; |
| |
| void dlpar_free_cc_property(struct property *prop) |
| { |
| kfree(prop->name); |
| kfree(prop->value); |
| kfree(prop); |
| } |
| |
| static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa) |
| { |
| struct property *prop; |
| char *name; |
| char *value; |
| |
| prop = kzalloc(sizeof(*prop), GFP_KERNEL); |
| if (!prop) |
| return NULL; |
| |
| name = (char *)ccwa + ccwa->name_offset; |
| prop->name = kstrdup(name, GFP_KERNEL); |
| |
| prop->length = ccwa->prop_length; |
| value = (char *)ccwa + ccwa->prop_offset; |
| prop->value = kmemdup(value, prop->length, GFP_KERNEL); |
| if (!prop->value) { |
| dlpar_free_cc_property(prop); |
| return NULL; |
| } |
| |
| return prop; |
| } |
| |
| static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa) |
| { |
| struct device_node *dn; |
| char *name; |
| |
| dn = kzalloc(sizeof(*dn), GFP_KERNEL); |
| if (!dn) |
| return NULL; |
| |
| /* The configure connector reported name does not contain a |
| * preceding '/', so we allocate a buffer large enough to |
| * prepend this to the full_name. |
| */ |
| name = (char *)ccwa + ccwa->name_offset; |
| dn->full_name = kasprintf(GFP_KERNEL, "/%s", name); |
| if (!dn->full_name) { |
| kfree(dn); |
| return NULL; |
| } |
| |
| return dn; |
| } |
| |
| static void dlpar_free_one_cc_node(struct device_node *dn) |
| { |
| struct property *prop; |
| |
| while (dn->properties) { |
| prop = dn->properties; |
| dn->properties = prop->next; |
| dlpar_free_cc_property(prop); |
| } |
| |
| kfree(dn->full_name); |
| kfree(dn); |
| } |
| |
| void dlpar_free_cc_nodes(struct device_node *dn) |
| { |
| if (dn->child) |
| dlpar_free_cc_nodes(dn->child); |
| |
| if (dn->sibling) |
| dlpar_free_cc_nodes(dn->sibling); |
| |
| dlpar_free_one_cc_node(dn); |
| } |
| |
| #define NEXT_SIBLING 1 |
| #define NEXT_CHILD 2 |
| #define NEXT_PROPERTY 3 |
| #define PREV_PARENT 4 |
| #define MORE_MEMORY 5 |
| #define CALL_AGAIN -2 |
| #define ERR_CFG_USE -9003 |
| |
| struct device_node *dlpar_configure_connector(u32 drc_index) |
| { |
| struct device_node *dn; |
| struct device_node *first_dn = NULL; |
| struct device_node *last_dn = NULL; |
| struct property *property; |
| struct property *last_property = NULL; |
| struct cc_workarea *ccwa; |
| char *data_buf; |
| int cc_token; |
| int rc = -1; |
| |
| cc_token = rtas_token("ibm,configure-connector"); |
| if (cc_token == RTAS_UNKNOWN_SERVICE) |
| return NULL; |
| |
| data_buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); |
| if (!data_buf) |
| return NULL; |
| |
| ccwa = (struct cc_workarea *)&data_buf[0]; |
| ccwa->drc_index = drc_index; |
| ccwa->zero = 0; |
| |
| do { |
| /* Since we release the rtas_data_buf lock between configure |
| * connector calls we want to re-populate the rtas_data_buffer |
| * with the contents of the previous call. |
| */ |
| spin_lock(&rtas_data_buf_lock); |
| |
| memcpy(rtas_data_buf, data_buf, RTAS_DATA_BUF_SIZE); |
| rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); |
| memcpy(data_buf, rtas_data_buf, RTAS_DATA_BUF_SIZE); |
| |
| spin_unlock(&rtas_data_buf_lock); |
| |
| switch (rc) { |
| case NEXT_SIBLING: |
| dn = dlpar_parse_cc_node(ccwa); |
| if (!dn) |
| goto cc_error; |
| |
| dn->parent = last_dn->parent; |
| last_dn->sibling = dn; |
| last_dn = dn; |
| break; |
| |
| case NEXT_CHILD: |
| dn = dlpar_parse_cc_node(ccwa); |
| if (!dn) |
| goto cc_error; |
| |
| if (!first_dn) |
| first_dn = dn; |
| else { |
| dn->parent = last_dn; |
| if (last_dn) |
| last_dn->child = dn; |
| } |
| |
| last_dn = dn; |
| break; |
| |
| case NEXT_PROPERTY: |
| property = dlpar_parse_cc_property(ccwa); |
| if (!property) |
| goto cc_error; |
| |
| if (!last_dn->properties) |
| last_dn->properties = property; |
| else |
| last_property->next = property; |
| |
| last_property = property; |
| break; |
| |
| case PREV_PARENT: |
| last_dn = last_dn->parent; |
| break; |
| |
| case CALL_AGAIN: |
| break; |
| |
| case MORE_MEMORY: |
| case ERR_CFG_USE: |
| default: |
| printk(KERN_ERR "Unexpected Error (%d) " |
| "returned from configure-connector\n", rc); |
| goto cc_error; |
| } |
| } while (rc); |
| |
| cc_error: |
| kfree(data_buf); |
| |
| if (rc) { |
| if (first_dn) |
| dlpar_free_cc_nodes(first_dn); |
| |
| return NULL; |
| } |
| |
| return first_dn; |
| } |
| |
| static struct device_node *derive_parent(const char *path) |
| { |
| struct device_node *parent; |
| char *last_slash; |
| |
| last_slash = strrchr(path, '/'); |
| if (last_slash == path) { |
| parent = of_find_node_by_path("/"); |
| } else { |
| char *parent_path; |
| int parent_path_len = last_slash - path + 1; |
| parent_path = kmalloc(parent_path_len, GFP_KERNEL); |
| if (!parent_path) |
| return NULL; |
| |
| strlcpy(parent_path, path, parent_path_len); |
| parent = of_find_node_by_path(parent_path); |
| kfree(parent_path); |
| } |
| |
| return parent; |
| } |
| |
| int dlpar_attach_node(struct device_node *dn) |
| { |
| #ifdef CONFIG_PROC_DEVICETREE |
| struct proc_dir_entry *ent; |
| #endif |
| int rc; |
| |
| of_node_set_flag(dn, OF_DYNAMIC); |
| kref_init(&dn->kref); |
| dn->parent = derive_parent(dn->full_name); |
| if (!dn->parent) |
| return -ENOMEM; |
| |
| rc = blocking_notifier_call_chain(&pSeries_reconfig_chain, |
| PSERIES_RECONFIG_ADD, dn); |
| if (rc == NOTIFY_BAD) { |
| printk(KERN_ERR "Failed to add device node %s\n", |
| dn->full_name); |
| return -ENOMEM; /* For now, safe to assume kmalloc failure */ |
| } |
| |
| of_attach_node(dn); |
| |
| #ifdef CONFIG_PROC_DEVICETREE |
| ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde); |
| if (ent) |
| proc_device_tree_add_node(dn, ent); |
| #endif |
| |
| of_node_put(dn->parent); |
| return 0; |
| } |
| |
| int dlpar_detach_node(struct device_node *dn) |
| { |
| #ifdef CONFIG_PROC_DEVICETREE |
| struct device_node *parent = dn->parent; |
| struct property *prop = dn->properties; |
| |
| while (prop) { |
| remove_proc_entry(prop->name, dn->pde); |
| prop = prop->next; |
| } |
| |
| if (dn->pde) |
| remove_proc_entry(dn->pde->name, parent->pde); |
| #endif |
| |
| blocking_notifier_call_chain(&pSeries_reconfig_chain, |
| PSERIES_RECONFIG_REMOVE, dn); |
| of_detach_node(dn); |
| of_node_put(dn); /* Must decrement the refcount */ |
| |
| return 0; |
| } |
| |
| #define DR_ENTITY_SENSE 9003 |
| #define DR_ENTITY_PRESENT 1 |
| #define DR_ENTITY_UNUSABLE 2 |
| #define ALLOCATION_STATE 9003 |
| #define ALLOC_UNUSABLE 0 |
| #define ALLOC_USABLE 1 |
| #define ISOLATION_STATE 9001 |
| #define ISOLATE 0 |
| #define UNISOLATE 1 |
| |
| int dlpar_acquire_drc(u32 drc_index) |
| { |
| int dr_status, rc; |
| |
| rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status, |
| DR_ENTITY_SENSE, drc_index); |
| if (rc || dr_status != DR_ENTITY_UNUSABLE) |
| return -1; |
| |
| rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE); |
| if (rc) |
| return rc; |
| |
| rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE); |
| if (rc) { |
| rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| int dlpar_release_drc(u32 drc_index) |
| { |
| int dr_status, rc; |
| |
| rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status, |
| DR_ENTITY_SENSE, drc_index); |
| if (rc || dr_status != DR_ENTITY_PRESENT) |
| return -1; |
| |
| rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE); |
| if (rc) |
| return rc; |
| |
| rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE); |
| if (rc) { |
| rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE |
| |
| static int dlpar_online_cpu(struct device_node *dn) |
| { |
| int rc = 0; |
| unsigned int cpu; |
| int len, nthreads, i; |
| const u32 *intserv; |
| |
| intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); |
| if (!intserv) |
| return -EINVAL; |
| |
| nthreads = len / sizeof(u32); |
| |
| cpu_maps_update_begin(); |
| for (i = 0; i < nthreads; i++) { |
| for_each_present_cpu(cpu) { |
| if (get_hard_smp_processor_id(cpu) != intserv[i]) |
| continue; |
| BUG_ON(get_cpu_current_state(cpu) |
| != CPU_STATE_OFFLINE); |
| cpu_maps_update_done(); |
| rc = cpu_up(cpu); |
| if (rc) |
| goto out; |
| cpu_maps_update_begin(); |
| |
| break; |
| } |
| if (cpu == num_possible_cpus()) |
| printk(KERN_WARNING "Could not find cpu to online " |
| "with physical id 0x%x\n", intserv[i]); |
| } |
| cpu_maps_update_done(); |
| |
| out: |
| return rc; |
| |
| } |
| |
| static ssize_t dlpar_cpu_probe(const char *buf, size_t count) |
| { |
| struct device_node *dn; |
| unsigned long drc_index; |
| char *cpu_name; |
| int rc; |
| |
| cpu_hotplug_driver_lock(); |
| rc = strict_strtoul(buf, 0, &drc_index); |
| if (rc) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| dn = dlpar_configure_connector(drc_index); |
| if (!dn) { |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| /* configure-connector reports cpus as living in the base |
| * directory of the device tree. CPUs actually live in the |
| * cpus directory so we need to fixup the full_name. |
| */ |
| cpu_name = kasprintf(GFP_KERNEL, "/cpus%s", dn->full_name); |
| if (!cpu_name) { |
| dlpar_free_cc_nodes(dn); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| kfree(dn->full_name); |
| dn->full_name = cpu_name; |
| |
| rc = dlpar_acquire_drc(drc_index); |
| if (rc) { |
| dlpar_free_cc_nodes(dn); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| rc = dlpar_attach_node(dn); |
| if (rc) { |
| dlpar_release_drc(drc_index); |
| dlpar_free_cc_nodes(dn); |
| goto out; |
| } |
| |
| rc = dlpar_online_cpu(dn); |
| out: |
| cpu_hotplug_driver_unlock(); |
| |
| return rc ? rc : count; |
| } |
| |
| static int dlpar_offline_cpu(struct device_node *dn) |
| { |
| int rc = 0; |
| unsigned int cpu; |
| int len, nthreads, i; |
| const u32 *intserv; |
| |
| intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); |
| if (!intserv) |
| return -EINVAL; |
| |
| nthreads = len / sizeof(u32); |
| |
| cpu_maps_update_begin(); |
| for (i = 0; i < nthreads; i++) { |
| for_each_present_cpu(cpu) { |
| if (get_hard_smp_processor_id(cpu) != intserv[i]) |
| continue; |
| |
| if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE) |
| break; |
| |
| if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { |
| set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); |
| cpu_maps_update_done(); |
| rc = cpu_down(cpu); |
| if (rc) |
| goto out; |
| cpu_maps_update_begin(); |
| break; |
| |
| } |
| |
| /* |
| * The cpu is in CPU_STATE_INACTIVE. |
| * Upgrade it's state to CPU_STATE_OFFLINE. |
| */ |
| set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); |
| BUG_ON(plpar_hcall_norets(H_PROD, intserv[i]) |
| != H_SUCCESS); |
| __cpu_die(cpu); |
| break; |
| } |
| if (cpu == num_possible_cpus()) |
| printk(KERN_WARNING "Could not find cpu to offline " |
| "with physical id 0x%x\n", intserv[i]); |
| } |
| cpu_maps_update_done(); |
| |
| out: |
| return rc; |
| |
| } |
| |
| static ssize_t dlpar_cpu_release(const char *buf, size_t count) |
| { |
| struct device_node *dn; |
| const u32 *drc_index; |
| int rc; |
| |
| dn = of_find_node_by_path(buf); |
| if (!dn) |
| return -EINVAL; |
| |
| drc_index = of_get_property(dn, "ibm,my-drc-index", NULL); |
| if (!drc_index) { |
| of_node_put(dn); |
| return -EINVAL; |
| } |
| |
| cpu_hotplug_driver_lock(); |
| rc = dlpar_offline_cpu(dn); |
| if (rc) { |
| of_node_put(dn); |
| rc = -EINVAL; |
| goto out; |
| } |
| |
| rc = dlpar_release_drc(*drc_index); |
| if (rc) { |
| of_node_put(dn); |
| goto out; |
| } |
| |
| rc = dlpar_detach_node(dn); |
| if (rc) { |
| dlpar_acquire_drc(*drc_index); |
| goto out; |
| } |
| |
| of_node_put(dn); |
| out: |
| cpu_hotplug_driver_unlock(); |
| return rc ? rc : count; |
| } |
| |
| static int __init pseries_dlpar_init(void) |
| { |
| ppc_md.cpu_probe = dlpar_cpu_probe; |
| ppc_md.cpu_release = dlpar_cpu_release; |
| |
| return 0; |
| } |
| machine_device_initcall(pseries, pseries_dlpar_init); |
| |
| #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ |