| /* |
| * Copyright (c) 2011, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8660_H |
| #define __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_8660_H |
| |
| #define RPM_VREG_PIN_CTRL_PM8058_A0 0x01 |
| #define RPM_VREG_PIN_CTRL_PM8058_A1 0x02 |
| #define RPM_VREG_PIN_CTRL_PM8058_D0 0x04 |
| #define RPM_VREG_PIN_CTRL_PM8058_D1 0x08 |
| |
| #define RPM_VREG_PIN_CTRL_PM8901_A0 0x01 |
| #define RPM_VREG_PIN_CTRL_PM8901_A1 0x02 |
| #define RPM_VREG_PIN_CTRL_PM8901_D0 0x04 |
| #define RPM_VREG_PIN_CTRL_PM8901_D1 0x08 |
| |
| |
| /** |
| * enum rpm_vreg_pin_fn_8660 - RPM regulator pin function choices |
| * %RPM_VREG_PIN_FN_8660_ENABLE: pin control switches between disable and |
| * enable |
| * %RPM_VREG_PIN_FN_8660_MODE: pin control switches between LPM and HPM |
| * %RPM_VREG_PIN_FN_8660_SLEEP_B: regulator is forced into LPM when |
| * sleep_b signal is asserted |
| * %RPM_VREG_PIN_FN_8660_NONE: do not use pin control for the regulator |
| * and do not allow another master to |
| * request pin control |
| * |
| * The pin function specified in platform data corresponds to the active state |
| * pin function value. Pin function will be NONE until a consumer requests |
| * pin control to be enabled. |
| */ |
| enum rpm_vreg_pin_fn_8660 { |
| RPM_VREG_PIN_FN_8660_ENABLE = 0, |
| RPM_VREG_PIN_FN_8660_MODE, |
| RPM_VREG_PIN_FN_8660_SLEEP_B, |
| RPM_VREG_PIN_FN_8660_NONE, |
| }; |
| |
| /** |
| * enum rpm_vreg_force_mode_8660 - RPM regulator force mode choices |
| * %RPM_VREG_FORCE_MODE_8660_PIN_CTRL: allow pin control usage |
| * %RPM_VREG_FORCE_MODE_8660_NONE: do not force any mode |
| * %RPM_VREG_FORCE_MODE_8660_LPM: force into low power mode |
| * %RPM_VREG_FORCE_MODE_8660_HPM: force into high power mode |
| * |
| * Force mode is used to override aggregation with other masters and to set |
| * special operating modes. |
| */ |
| enum rpm_vreg_force_mode_8660 { |
| RPM_VREG_FORCE_MODE_8660_PIN_CTRL = 0, |
| RPM_VREG_FORCE_MODE_8660_NONE = 0, |
| RPM_VREG_FORCE_MODE_8660_LPM, |
| RPM_VREG_FORCE_MODE_8660_HPM, |
| }; |
| |
| enum rpm_vreg_id_8660 { |
| RPM_VREG_ID_PM8058_L0, |
| RPM_VREG_ID_PM8058_L1, |
| RPM_VREG_ID_PM8058_L2, |
| RPM_VREG_ID_PM8058_L3, |
| RPM_VREG_ID_PM8058_L4, |
| RPM_VREG_ID_PM8058_L5, |
| RPM_VREG_ID_PM8058_L6, |
| RPM_VREG_ID_PM8058_L7, |
| RPM_VREG_ID_PM8058_L8, |
| RPM_VREG_ID_PM8058_L9, |
| RPM_VREG_ID_PM8058_L10, |
| RPM_VREG_ID_PM8058_L11, |
| RPM_VREG_ID_PM8058_L12, |
| RPM_VREG_ID_PM8058_L13, |
| RPM_VREG_ID_PM8058_L14, |
| RPM_VREG_ID_PM8058_L15, |
| RPM_VREG_ID_PM8058_L16, |
| RPM_VREG_ID_PM8058_L17, |
| RPM_VREG_ID_PM8058_L18, |
| RPM_VREG_ID_PM8058_L19, |
| RPM_VREG_ID_PM8058_L20, |
| RPM_VREG_ID_PM8058_L21, |
| RPM_VREG_ID_PM8058_L22, |
| RPM_VREG_ID_PM8058_L23, |
| RPM_VREG_ID_PM8058_L24, |
| RPM_VREG_ID_PM8058_L25, |
| RPM_VREG_ID_PM8058_S0, |
| RPM_VREG_ID_PM8058_S1, |
| RPM_VREG_ID_PM8058_S2, |
| RPM_VREG_ID_PM8058_S3, |
| RPM_VREG_ID_PM8058_S4, |
| RPM_VREG_ID_PM8058_LVS0, |
| RPM_VREG_ID_PM8058_LVS1, |
| RPM_VREG_ID_PM8058_NCP, |
| RPM_VREG_ID_PM8901_L0, |
| RPM_VREG_ID_PM8901_L1, |
| RPM_VREG_ID_PM8901_L2, |
| RPM_VREG_ID_PM8901_L3, |
| RPM_VREG_ID_PM8901_L4, |
| RPM_VREG_ID_PM8901_L5, |
| RPM_VREG_ID_PM8901_L6, |
| RPM_VREG_ID_PM8901_S0, |
| RPM_VREG_ID_PM8901_S1, |
| RPM_VREG_ID_PM8901_S2, |
| RPM_VREG_ID_PM8901_S3, |
| RPM_VREG_ID_PM8901_S4, |
| RPM_VREG_ID_PM8901_LVS0, |
| RPM_VREG_ID_PM8901_LVS1, |
| RPM_VREG_ID_PM8901_LVS2, |
| RPM_VREG_ID_PM8901_LVS3, |
| RPM_VREG_ID_PM8901_MVS0, |
| RPM_VREG_ID_8660_MAX_REAL = RPM_VREG_ID_PM8901_MVS0, |
| |
| /* The following are IDs for regulator devices to enable pin control. */ |
| RPM_VREG_ID_PM8058_L0_PC, |
| RPM_VREG_ID_PM8058_L1_PC, |
| RPM_VREG_ID_PM8058_L2_PC, |
| RPM_VREG_ID_PM8058_L3_PC, |
| RPM_VREG_ID_PM8058_L4_PC, |
| RPM_VREG_ID_PM8058_L5_PC, |
| RPM_VREG_ID_PM8058_L6_PC, |
| RPM_VREG_ID_PM8058_L7_PC, |
| RPM_VREG_ID_PM8058_L8_PC, |
| RPM_VREG_ID_PM8058_L9_PC, |
| RPM_VREG_ID_PM8058_L10_PC, |
| RPM_VREG_ID_PM8058_L11_PC, |
| RPM_VREG_ID_PM8058_L12_PC, |
| RPM_VREG_ID_PM8058_L13_PC, |
| RPM_VREG_ID_PM8058_L14_PC, |
| RPM_VREG_ID_PM8058_L15_PC, |
| RPM_VREG_ID_PM8058_L16_PC, |
| RPM_VREG_ID_PM8058_L17_PC, |
| RPM_VREG_ID_PM8058_L18_PC, |
| RPM_VREG_ID_PM8058_L19_PC, |
| RPM_VREG_ID_PM8058_L20_PC, |
| RPM_VREG_ID_PM8058_L21_PC, |
| RPM_VREG_ID_PM8058_L22_PC, |
| RPM_VREG_ID_PM8058_L23_PC, |
| RPM_VREG_ID_PM8058_L24_PC, |
| RPM_VREG_ID_PM8058_L25_PC, |
| RPM_VREG_ID_PM8058_S0_PC, |
| RPM_VREG_ID_PM8058_S1_PC, |
| RPM_VREG_ID_PM8058_S2_PC, |
| RPM_VREG_ID_PM8058_S3_PC, |
| RPM_VREG_ID_PM8058_S4_PC, |
| RPM_VREG_ID_PM8058_LVS0_PC, |
| RPM_VREG_ID_PM8058_LVS1_PC, |
| |
| RPM_VREG_ID_PM8901_L0_PC, |
| RPM_VREG_ID_PM8901_L1_PC, |
| RPM_VREG_ID_PM8901_L2_PC, |
| RPM_VREG_ID_PM8901_L3_PC, |
| RPM_VREG_ID_PM8901_L4_PC, |
| RPM_VREG_ID_PM8901_L5_PC, |
| RPM_VREG_ID_PM8901_L6_PC, |
| RPM_VREG_ID_PM8901_S0_PC, |
| RPM_VREG_ID_PM8901_S1_PC, |
| RPM_VREG_ID_PM8901_S2_PC, |
| RPM_VREG_ID_PM8901_S3_PC, |
| RPM_VREG_ID_PM8901_S4_PC, |
| RPM_VREG_ID_PM8901_LVS0_PC, |
| RPM_VREG_ID_PM8901_LVS1_PC, |
| RPM_VREG_ID_PM8901_LVS2_PC, |
| RPM_VREG_ID_PM8901_LVS3_PC, |
| RPM_VREG_ID_PM8901_MVS0_PC, |
| RPM_VREG_ID_8660_MAX = RPM_VREG_ID_PM8901_MVS0_PC, |
| }; |
| |
| /* Minimum high power mode loads in uA. */ |
| #define RPM_VREG_8660_LDO_50_HPM_MIN_LOAD 5000 |
| #define RPM_VREG_8660_LDO_150_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8660_LDO_300_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_8660_SMPS_HPM_MIN_LOAD 50000 |
| #define RPM_VREG_8660_FTSMPS_HPM_MIN_LOAD 100000 |
| |
| #endif |