| /* |
| * dscore.c |
| * |
| * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/usb.h> |
| |
| #include "dscore.h" |
| |
| static struct usb_device_id ds_id_table [] = { |
| { USB_DEVICE(0x04fa, 0x2490) }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(usb, ds_id_table); |
| |
| static int ds_probe(struct usb_interface *, const struct usb_device_id *); |
| static void ds_disconnect(struct usb_interface *); |
| |
| int ds_touch_bit(struct ds_device *, u8, u8 *); |
| int ds_read_byte(struct ds_device *, u8 *); |
| int ds_read_bit(struct ds_device *, u8 *); |
| int ds_write_byte(struct ds_device *, u8); |
| int ds_write_bit(struct ds_device *, u8); |
| static int ds_start_pulse(struct ds_device *, int); |
| int ds_reset(struct ds_device *, struct ds_status *); |
| struct ds_device * ds_get_device(void); |
| void ds_put_device(struct ds_device *); |
| |
| static inline void ds_dump_status(unsigned char *, unsigned char *, int); |
| static int ds_send_control(struct ds_device *, u16, u16); |
| static int ds_send_control_mode(struct ds_device *, u16, u16); |
| static int ds_send_control_cmd(struct ds_device *, u16, u16); |
| |
| |
| static struct usb_driver ds_driver = { |
| .owner = THIS_MODULE, |
| .name = "DS9490R", |
| .probe = ds_probe, |
| .disconnect = ds_disconnect, |
| .id_table = ds_id_table, |
| }; |
| |
| static struct ds_device *ds_dev; |
| |
| struct ds_device * ds_get_device(void) |
| { |
| if (ds_dev) |
| atomic_inc(&ds_dev->refcnt); |
| return ds_dev; |
| } |
| |
| void ds_put_device(struct ds_device *dev) |
| { |
| atomic_dec(&dev->refcnt); |
| } |
| |
| static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) |
| { |
| int err; |
| |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), |
| CONTROL_CMD, 0x40, value, index, NULL, 0, 1000); |
| if (err < 0) { |
| printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n", |
| value, index, err); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) |
| { |
| int err; |
| |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), |
| MODE_CMD, 0x40, value, index, NULL, 0, 1000); |
| if (err < 0) { |
| printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n", |
| value, index, err); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| static int ds_send_control(struct ds_device *dev, u16 value, u16 index) |
| { |
| int err; |
| |
| err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), |
| COMM_CMD, 0x40, value, index, NULL, 0, 1000); |
| if (err < 0) { |
| printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n", |
| value, index, err); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off) |
| { |
| printk("%45s: %8x\n", str, buf[off]); |
| } |
| |
| static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, |
| unsigned char *buf, int size) |
| { |
| int count, err; |
| |
| memset(st, 0, sizeof(st)); |
| |
| count = 0; |
| err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100); |
| if (err < 0) { |
| printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err); |
| return err; |
| } |
| |
| if (count >= sizeof(*st)) |
| memcpy(st, buf, sizeof(*st)); |
| |
| return count; |
| } |
| |
| static int ds_recv_status(struct ds_device *dev, struct ds_status *st) |
| { |
| unsigned char buf[64]; |
| int count, err = 0, i; |
| |
| memcpy(st, buf, sizeof(*st)); |
| |
| count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); |
| if (count < 0) |
| return err; |
| |
| printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); |
| for (i=0; i<count; ++i) |
| printk("%02x ", buf[i]); |
| printk("\n"); |
| |
| if (count >= 16) { |
| ds_dump_status(buf, "enable flag", 0); |
| ds_dump_status(buf, "1-wire speed", 1); |
| ds_dump_status(buf, "strong pullup duration", 2); |
| ds_dump_status(buf, "programming pulse duration", 3); |
| ds_dump_status(buf, "pulldown slew rate control", 4); |
| ds_dump_status(buf, "write-1 low time", 5); |
| ds_dump_status(buf, "data sample offset/write-0 recovery time", 6); |
| ds_dump_status(buf, "reserved (test register)", 7); |
| ds_dump_status(buf, "device status flags", 8); |
| ds_dump_status(buf, "communication command byte 1", 9); |
| ds_dump_status(buf, "communication command byte 2", 10); |
| ds_dump_status(buf, "communication command buffer status", 11); |
| ds_dump_status(buf, "1-wire data output buffer status", 12); |
| ds_dump_status(buf, "1-wire data input buffer status", 13); |
| ds_dump_status(buf, "reserved", 14); |
| ds_dump_status(buf, "reserved", 15); |
| } |
| |
| memcpy(st, buf, sizeof(*st)); |
| |
| if (st->status & ST_EPOF) { |
| printk(KERN_INFO "Resetting device after ST_EPOF.\n"); |
| err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); |
| if (err) |
| return err; |
| count = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); |
| if (count < 0) |
| return err; |
| } |
| #if 0 |
| if (st->status & ST_IDLE) { |
| printk(KERN_INFO "Resetting pulse after ST_IDLE.\n"); |
| err = ds_start_pulse(dev, PULLUP_PULSE_DURATION); |
| if (err) |
| return err; |
| } |
| #endif |
| |
| return err; |
| } |
| |
| static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) |
| { |
| int count, err; |
| struct ds_status st; |
| |
| count = 0; |
| err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), |
| buf, size, &count, 1000); |
| if (err < 0) { |
| printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); |
| usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); |
| ds_recv_status(dev, &st); |
| return err; |
| } |
| |
| #if 0 |
| { |
| int i; |
| |
| printk("%s: count=%d: ", __func__, count); |
| for (i=0; i<count; ++i) |
| printk("%02x ", buf[i]); |
| printk("\n"); |
| } |
| #endif |
| return count; |
| } |
| |
| static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len) |
| { |
| int count, err; |
| |
| count = 0; |
| err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); |
| if (err < 0) { |
| printk(KERN_ERR "Failed to read 1-wire data from 0x02: err=%d.\n", err); |
| return err; |
| } |
| |
| return err; |
| } |
| |
| #if 0 |
| |
| int ds_stop_pulse(struct ds_device *dev, int limit) |
| { |
| struct ds_status st; |
| int count = 0, err = 0; |
| u8 buf[0x20]; |
| |
| do { |
| err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); |
| if (err) |
| break; |
| err = ds_send_control(dev, CTL_RESUME_EXE, 0); |
| if (err) |
| break; |
| err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); |
| if (err) |
| break; |
| |
| if ((st.status & ST_SPUA) == 0) { |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); |
| if (err) |
| break; |
| } |
| } while(++count < limit); |
| |
| return err; |
| } |
| |
| int ds_detect(struct ds_device *dev, struct ds_status *st) |
| { |
| int err; |
| |
| err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); |
| if (err) |
| return err; |
| |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); |
| if (err) |
| return err; |
| |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); |
| if (err) |
| return err; |
| |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); |
| if (err) |
| return err; |
| |
| err = ds_recv_status(dev, st); |
| |
| return err; |
| } |
| |
| #endif /* 0 */ |
| |
| static int ds_wait_status(struct ds_device *dev, struct ds_status *st) |
| { |
| u8 buf[0x20]; |
| int err, count = 0; |
| |
| do { |
| err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); |
| #if 0 |
| if (err >= 0) { |
| int i; |
| printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); |
| for (i=0; i<err; ++i) |
| printk("%02x ", buf[i]); |
| printk("\n"); |
| } |
| #endif |
| } while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100); |
| |
| |
| if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) { |
| ds_recv_status(dev, st); |
| return -1; |
| } else |
| return 0; |
| } |
| |
| int ds_reset(struct ds_device *dev, struct ds_status *st) |
| { |
| int err; |
| |
| //err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE); |
| err = ds_send_control(dev, 0x43, SPEED_NORMAL); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, st); |
| #if 0 |
| if (st->command_buffer_status) { |
| printk(KERN_INFO "Short circuit.\n"); |
| return -EIO; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| #if 0 |
| int ds_set_speed(struct ds_device *dev, int speed) |
| { |
| int err; |
| |
| if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) |
| return -EINVAL; |
| |
| if (speed != SPEED_OVERDRIVE) |
| speed = SPEED_FLEXIBLE; |
| |
| speed &= 0xff; |
| |
| err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); |
| if (err) |
| return err; |
| |
| return err; |
| } |
| #endif /* 0 */ |
| |
| static int ds_start_pulse(struct ds_device *dev, int delay) |
| { |
| int err; |
| u8 del = 1 + (u8)(delay >> 4); |
| struct ds_status st; |
| |
| #if 0 |
| err = ds_stop_pulse(dev, 10); |
| if (err) |
| return err; |
| |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); |
| if (err) |
| return err; |
| #endif |
| err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); |
| if (err) |
| return err; |
| |
| err = ds_send_control(dev, COMM_PULSE | COMM_IM | COMM_F, 0); |
| if (err) |
| return err; |
| |
| mdelay(delay); |
| |
| ds_wait_status(dev, &st); |
| |
| return err; |
| } |
| |
| int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) |
| { |
| int err, count; |
| struct ds_status st; |
| u16 value = (COMM_BIT_IO | COMM_IM) | ((bit) ? COMM_D : 0); |
| u16 cmd; |
| |
| err = ds_send_control(dev, value, 0); |
| if (err) |
| return err; |
| |
| count = 0; |
| do { |
| err = ds_wait_status(dev, &st); |
| if (err) |
| return err; |
| |
| cmd = st.command0 | (st.command1 << 8); |
| } while (cmd != value && ++count < 10); |
| |
| if (err < 0 || count >= 10) { |
| printk(KERN_ERR "Failed to obtain status.\n"); |
| return -EINVAL; |
| } |
| |
| err = ds_recv_data(dev, tbit, sizeof(*tbit)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| int ds_write_bit(struct ds_device *dev, u8 bit) |
| { |
| int err; |
| struct ds_status st; |
| |
| err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit) ? COMM_D : 0, 0); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| return 0; |
| } |
| |
| int ds_write_byte(struct ds_device *dev, u8 byte) |
| { |
| int err; |
| struct ds_status st; |
| u8 rbyte; |
| |
| err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte); |
| if (err) |
| return err; |
| |
| err = ds_wait_status(dev, &st); |
| if (err) |
| return err; |
| |
| err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); |
| if (err < 0) |
| return err; |
| |
| ds_start_pulse(dev, PULLUP_PULSE_DURATION); |
| |
| return !(byte == rbyte); |
| } |
| |
| int ds_read_bit(struct ds_device *dev, u8 *bit) |
| { |
| int err; |
| |
| err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE); |
| if (err) |
| return err; |
| |
| err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_SPU | COMM_D, 0); |
| if (err) |
| return err; |
| |
| err = ds_recv_data(dev, bit, sizeof(*bit)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| int ds_read_byte(struct ds_device *dev, u8 *byte) |
| { |
| int err; |
| struct ds_status st; |
| |
| err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| err = ds_recv_data(dev, byte, sizeof(*byte)); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| int ds_read_block(struct ds_device *dev, u8 *buf, int len) |
| { |
| struct ds_status st; |
| int err; |
| |
| if (len > 64*1024) |
| return -E2BIG; |
| |
| memset(buf, 0xFF, len); |
| |
| err = ds_send_data(dev, buf, len); |
| if (err < 0) |
| return err; |
| |
| err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| memset(buf, 0x00, len); |
| err = ds_recv_data(dev, buf, len); |
| |
| return err; |
| } |
| |
| int ds_write_block(struct ds_device *dev, u8 *buf, int len) |
| { |
| int err; |
| struct ds_status st; |
| |
| err = ds_send_data(dev, buf, len); |
| if (err < 0) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| err = ds_recv_data(dev, buf, len); |
| if (err < 0) |
| return err; |
| |
| ds_start_pulse(dev, PULLUP_PULSE_DURATION); |
| |
| return !(err == len); |
| } |
| |
| #if 0 |
| |
| int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search) |
| { |
| int err; |
| u16 value, index; |
| struct ds_status st; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| err = ds_send_data(ds_dev, (unsigned char *)&init, 8); |
| if (err) |
| return err; |
| |
| ds_wait_status(ds_dev, &st); |
| |
| value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS; |
| index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8); |
| err = ds_send_control(ds_dev, value, index); |
| if (err) |
| return err; |
| |
| ds_wait_status(ds_dev, &st); |
| |
| err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number); |
| if (err < 0) |
| return err; |
| |
| return err/8; |
| } |
| |
| int ds_match_access(struct ds_device *dev, u64 init) |
| { |
| int err; |
| struct ds_status st; |
| |
| err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| return 0; |
| } |
| |
| int ds_set_path(struct ds_device *dev, u64 init) |
| { |
| int err; |
| struct ds_status st; |
| u8 buf[9]; |
| |
| memcpy(buf, &init, 8); |
| buf[8] = BRANCH_MAIN; |
| |
| err = ds_send_data(dev, buf, sizeof(buf)); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); |
| if (err) |
| return err; |
| |
| ds_wait_status(dev, &st); |
| |
| return 0; |
| } |
| |
| #endif /* 0 */ |
| |
| static int ds_probe(struct usb_interface *intf, |
| const struct usb_device_id *udev_id) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct usb_endpoint_descriptor *endpoint; |
| struct usb_host_interface *iface_desc; |
| int i, err; |
| |
| ds_dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL); |
| if (!ds_dev) { |
| printk(KERN_INFO "Failed to allocate new DS9490R structure.\n"); |
| return -ENOMEM; |
| } |
| |
| ds_dev->udev = usb_get_dev(udev); |
| usb_set_intfdata(intf, ds_dev); |
| |
| err = usb_set_interface(ds_dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3); |
| if (err) { |
| printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n", |
| intf->altsetting[0].desc.bInterfaceNumber, err); |
| return err; |
| } |
| |
| err = usb_reset_configuration(ds_dev->udev); |
| if (err) { |
| printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err); |
| return err; |
| } |
| |
| iface_desc = &intf->altsetting[0]; |
| if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { |
| printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints); |
| return -ENODEV; |
| } |
| |
| atomic_set(&ds_dev->refcnt, 0); |
| memset(ds_dev->ep, 0, sizeof(ds_dev->ep)); |
| |
| /* |
| * This loop doesn'd show control 0 endpoint, |
| * so we will fill only 1-3 endpoints entry. |
| */ |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| endpoint = &iface_desc->endpoint[i].desc; |
| |
| ds_dev->ep[i+1] = endpoint->bEndpointAddress; |
| |
| printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", |
| i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), |
| (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", |
| endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); |
| } |
| |
| #if 0 |
| { |
| int err, i; |
| u64 buf[3]; |
| u64 init=0xb30000002078ee81ull; |
| struct ds_status st; |
| |
| ds_reset(ds_dev, &st); |
| err = ds_search(ds_dev, init, buf, 3, 0); |
| if (err < 0) |
| return err; |
| for (i=0; i<err; ++i) |
| printk("%d: %llx\n", i, buf[i]); |
| |
| printk("Resetting...\n"); |
| ds_reset(ds_dev, &st); |
| printk("Setting path for %llx.\n", init); |
| err = ds_set_path(ds_dev, init); |
| if (err) |
| return err; |
| printk("Calling MATCH_ACCESS.\n"); |
| err = ds_match_access(ds_dev, init); |
| if (err) |
| return err; |
| |
| printk("Searching the bus...\n"); |
| err = ds_search(ds_dev, init, buf, 3, 0); |
| |
| printk("ds_search() returned %d\n", err); |
| |
| if (err < 0) |
| return err; |
| for (i=0; i<err; ++i) |
| printk("%d: %llx\n", i, buf[i]); |
| |
| return 0; |
| } |
| #endif |
| |
| return 0; |
| } |
| |
| static void ds_disconnect(struct usb_interface *intf) |
| { |
| struct ds_device *dev; |
| |
| dev = usb_get_intfdata(intf); |
| usb_set_intfdata(intf, NULL); |
| |
| while (atomic_read(&dev->refcnt)) { |
| printk(KERN_INFO "Waiting for DS to become free: refcnt=%d.\n", |
| atomic_read(&dev->refcnt)); |
| |
| if (msleep_interruptible(1000)) |
| flush_signals(current); |
| } |
| |
| usb_put_dev(dev->udev); |
| kfree(dev); |
| ds_dev = NULL; |
| } |
| |
| static int ds_init(void) |
| { |
| int err; |
| |
| err = usb_register(&ds_driver); |
| if (err) { |
| printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void ds_fini(void) |
| { |
| usb_deregister(&ds_driver); |
| } |
| |
| module_init(ds_init); |
| module_exit(ds_fini); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); |
| |
| EXPORT_SYMBOL(ds_touch_bit); |
| EXPORT_SYMBOL(ds_read_byte); |
| EXPORT_SYMBOL(ds_read_bit); |
| EXPORT_SYMBOL(ds_read_block); |
| EXPORT_SYMBOL(ds_write_byte); |
| EXPORT_SYMBOL(ds_write_bit); |
| EXPORT_SYMBOL(ds_write_block); |
| EXPORT_SYMBOL(ds_reset); |
| EXPORT_SYMBOL(ds_get_device); |
| EXPORT_SYMBOL(ds_put_device); |
| |
| /* |
| * This functions can be used for EEPROM programming, |
| * when driver will be included into mainline this will |
| * require uncommenting. |
| */ |
| #if 0 |
| EXPORT_SYMBOL(ds_start_pulse); |
| EXPORT_SYMBOL(ds_set_speed); |
| EXPORT_SYMBOL(ds_detect); |
| EXPORT_SYMBOL(ds_stop_pulse); |
| EXPORT_SYMBOL(ds_search); |
| #endif |