| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) |
| * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) |
| * Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <asm/sn/arch.h> |
| #include <asm/pci/bridge.h> |
| #include <asm/paccess.h> |
| #include <asm/sn/intr.h> |
| #include <asm/sn/sn0/hub.h> |
| |
| extern unsigned int allocate_irqno(void); |
| |
| /* |
| * Max #PCI busses we can handle; ie, max #PCI bridges. |
| */ |
| #define MAX_PCI_BUSSES 40 |
| |
| /* |
| * Max #PCI devices (like scsi controllers) we handle on a bus. |
| */ |
| #define MAX_DEVICES_PER_PCIBUS 8 |
| |
| /* |
| * XXX: No kmalloc available when we do our crosstalk scan, |
| * we should try to move it later in the boot process. |
| */ |
| static struct bridge_controller bridges[MAX_PCI_BUSSES]; |
| |
| /* |
| * Translate from irq to software PCI bus number and PCI slot. |
| */ |
| struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; |
| int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; |
| |
| /* |
| * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is |
| * not really documented, so right now I can't write code which uses it. |
| * Therefore we use type 0 accesses for now even though they won't work |
| * correcly for PCI-to-PCI bridges. |
| * |
| * The function is complicated by the ultimate brokeness of the IOC3 chip |
| * which is used in SGI systems. The IOC3 can only handle 32-bit PCI |
| * accesses and does only decode parts of it's address space. |
| */ |
| |
| static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 * value) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| bridge_t *bridge = bc->base; |
| int slot = PCI_SLOT(devfn); |
| int fn = PCI_FUNC(devfn); |
| volatile void *addr; |
| u32 cf, shift, mask; |
| int res; |
| |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at it for real ... |
| */ |
| if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| goto oh_my_gawd; |
| |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; |
| |
| if (size == 1) |
| res = get_dbe(*value, (u8 *) addr); |
| else if (size == 2) |
| res = get_dbe(*value, (u16 *) addr); |
| else |
| res = get_dbe(*value, (u32 *) addr); |
| |
| return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| |
| oh_my_gawd: |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at the wrong register. |
| */ |
| if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { |
| *value = 0; |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't try to access |
| * anything but 32-bit words ... |
| */ |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| shift = ((where & 3) << 3); |
| mask = (0xffffffffU >> ((4 - size) << 3)); |
| *value = (cf >> shift) & mask; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 * value) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| bridge_t *bridge = bc->base; |
| int busno = bus->number; |
| int slot = PCI_SLOT(devfn); |
| int fn = PCI_FUNC(devfn); |
| volatile void *addr; |
| u32 cf, shift, mask; |
| int res; |
| |
| bridge->b_pci_cfg = (busno << 16) | (slot << 11); |
| addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at it for real ... |
| */ |
| if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| goto oh_my_gawd; |
| |
| bridge->b_pci_cfg = (busno << 16) | (slot << 11); |
| addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; |
| |
| if (size == 1) |
| res = get_dbe(*value, (u8 *) addr); |
| else if (size == 2) |
| res = get_dbe(*value, (u16 *) addr); |
| else |
| res = get_dbe(*value, (u32 *) addr); |
| |
| return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| |
| oh_my_gawd: |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at the wrong register. |
| */ |
| if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { |
| *value = 0; |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't try to access |
| * anything but 32-bit words ... |
| */ |
| bridge->b_pci_cfg = (busno << 16) | (slot << 11); |
| addr = &bridge->b_type1_cfg.c[(fn << 8) | where]; |
| |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| shift = ((where & 3) << 3); |
| mask = (0xffffffffU >> ((4 - size) << 3)); |
| *value = (cf >> shift) & mask; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 * value) |
| { |
| if (bus->number > 0) |
| return pci_conf1_read_config(bus, devfn, where, size, value); |
| |
| return pci_conf0_read_config(bus, devfn, where, size, value); |
| } |
| |
| static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 value) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| bridge_t *bridge = bc->base; |
| int slot = PCI_SLOT(devfn); |
| int fn = PCI_FUNC(devfn); |
| volatile void *addr; |
| u32 cf, shift, mask, smask; |
| int res; |
| |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at it for real ... |
| */ |
| if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| goto oh_my_gawd; |
| |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; |
| |
| if (size == 1) { |
| res = put_dbe(value, (u8 *) addr); |
| } else if (size == 2) { |
| res = put_dbe(value, (u16 *) addr); |
| } else { |
| res = put_dbe(value, (u32 *) addr); |
| } |
| |
| if (res) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| oh_my_gawd: |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to touch the wrong register. |
| */ |
| if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) |
| return PCIBIOS_SUCCESSFUL; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't try to access |
| * anything but 32-bit words ... |
| */ |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| shift = ((where & 3) << 3); |
| mask = (0xffffffffU >> ((4 - size) << 3)); |
| smask = mask << shift; |
| |
| cf = (cf & ~smask) | ((value & mask) << shift); |
| if (put_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 value) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| bridge_t *bridge = bc->base; |
| int slot = PCI_SLOT(devfn); |
| int fn = PCI_FUNC(devfn); |
| int busno = bus->number; |
| volatile void *addr; |
| u32 cf, shift, mask, smask; |
| int res; |
| |
| bridge->b_pci_cfg = (busno << 16) | (slot << 11); |
| addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to look at it for real ... |
| */ |
| if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| goto oh_my_gawd; |
| |
| addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; |
| |
| if (size == 1) { |
| res = put_dbe(value, (u8 *) addr); |
| } else if (size == 2) { |
| res = put_dbe(value, (u16 *) addr); |
| } else { |
| res = put_dbe(value, (u32 *) addr); |
| } |
| |
| if (res) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| |
| oh_my_gawd: |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't even give the |
| * generic PCI code a chance to touch the wrong register. |
| */ |
| if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) |
| return PCIBIOS_SUCCESSFUL; |
| |
| /* |
| * IOC3 is fucked fucked beyond believe ... Don't try to access |
| * anything but 32-bit words ... |
| */ |
| addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| |
| if (get_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| shift = ((where & 3) << 3); |
| mask = (0xffffffffU >> ((4 - size) << 3)); |
| smask = mask << shift; |
| |
| cf = (cf & ~smask) | ((value & mask) << shift); |
| if (put_dbe(cf, (u32 *) addr)) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int pci_write_config(struct pci_bus *bus, unsigned int devfn, |
| int where, int size, u32 value) |
| { |
| if (bus->number > 0) |
| return pci_conf1_write_config(bus, devfn, where, size, value); |
| |
| return pci_conf0_write_config(bus, devfn, where, size, value); |
| } |
| |
| static struct pci_ops bridge_pci_ops = { |
| .read = pci_read_config, |
| .write = pci_write_config, |
| }; |
| |
| int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid) |
| { |
| unsigned long offset = NODE_OFFSET(nasid); |
| struct bridge_controller *bc; |
| static int num_bridges = 0; |
| bridge_t *bridge; |
| int slot; |
| |
| printk("a bridge\n"); |
| |
| /* XXX: kludge alert.. */ |
| if (!num_bridges) |
| ioport_resource.end = ~0UL; |
| |
| bc = &bridges[num_bridges]; |
| |
| bc->pc.pci_ops = &bridge_pci_ops; |
| bc->pc.mem_resource = &bc->mem; |
| bc->pc.io_resource = &bc->io; |
| |
| bc->pc.index = num_bridges; |
| |
| bc->mem.name = "Bridge PCI MEM"; |
| bc->pc.mem_offset = offset; |
| bc->mem.start = 0; |
| bc->mem.end = ~0UL; |
| bc->mem.flags = IORESOURCE_MEM; |
| |
| bc->io.name = "Bridge IO MEM"; |
| bc->pc.io_offset = offset; |
| bc->io.start = 0UL; |
| bc->io.end = ~0UL; |
| bc->io.flags = IORESOURCE_IO; |
| |
| bc->irq_cpu = smp_processor_id(); |
| bc->widget_id = widget_id; |
| bc->nasid = nasid; |
| |
| bc->baddr = (u64)masterwid << 60; |
| bc->baddr |= (1UL << 56); /* Barrier set */ |
| |
| /* |
| * point to this bridge |
| */ |
| bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); |
| |
| /* |
| * Clear all pending interrupts. |
| */ |
| bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; |
| |
| /* |
| * Until otherwise set up, assume all interrupts are from slot 0 |
| */ |
| bridge->b_int_device = 0x0; |
| |
| /* |
| * swap pio's to pci mem and io space (big windows) |
| */ |
| bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | |
| BRIDGE_CTRL_MEM_SWAP; |
| |
| /* |
| * Hmm... IRIX sets additional bits in the address which |
| * are documented as reserved in the bridge docs. |
| */ |
| bridge->b_wid_int_upper = 0x8000 | (masterwid << 16); |
| bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/ |
| bridge->b_dir_map = (masterwid << 20); /* DMA */ |
| bridge->b_int_enable = 0; |
| |
| for (slot = 0; slot < 8; slot ++) { |
| bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; |
| bc->pci_int[slot] = -1; |
| } |
| bridge->b_wid_tflush; /* wait until Bridge PIO complete */ |
| |
| bc->base = bridge; |
| |
| register_pci_controller(&bc->pc); |
| |
| num_bridges++; |
| |
| return 0; |
| } |
| |
| /* |
| * All observed requests have pin == 1. We could have a global here, that |
| * gets incremented and returned every time - unfortunately, pci_map_irq |
| * may be called on the same device over and over, and need to return the |
| * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. |
| * |
| * A given PCI device, in general, should be able to intr any of the cpus |
| * on any one of the hubs connected to its xbow. |
| */ |
| int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); |
| int irq = bc->pci_int[slot]; |
| |
| if (irq == -1) { |
| irq = bc->pci_int[slot] = request_bridge_irq(bc); |
| if (irq < 0) |
| panic("Can't allocate interrupt for PCI device %s\n", |
| pci_name(dev)); |
| } |
| |
| irq_to_bridge[irq] = bc; |
| irq_to_slot[irq] = slot; |
| |
| return irq; |
| } |
| |
| /* Do platform specific device initialization at pci_enable_device() time */ |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| return 0; |
| } |
| |
| /* |
| * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses |
| * to find the slot number in sense of the bridge device register. |
| * XXX This also means multiple devices might rely on conflicting bridge |
| * settings. |
| */ |
| |
| static inline void pci_disable_swapping(struct pci_dev *dev) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); |
| bridge_t *bridge = bc->base; |
| int slot = PCI_SLOT(dev->devfn); |
| |
| /* Turn off byte swapping */ |
| bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR; |
| bridge->b_widget.w_tflush; /* Flush */ |
| } |
| |
| static inline void pci_enable_swapping(struct pci_dev *dev) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); |
| bridge_t *bridge = bc->base; |
| int slot = PCI_SLOT(dev->devfn); |
| |
| /* Turn on byte swapping */ |
| bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; |
| bridge->b_widget.w_tflush; /* Flush */ |
| } |
| |
| static void __init pci_fixup_ioc3(struct pci_dev *d) |
| { |
| pci_disable_swapping(d); |
| } |
| |
| int pcibus_to_node(struct pci_bus *bus) |
| { |
| struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| |
| return bc->nasid; |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, |
| pci_fixup_ioc3); |