| /* |
| * Atmel maXTouch header file |
| * |
| * Copyright (c) 2010 Atmel Corporation |
| * Copyright (C) 2010 Ulf Samuelsson (ulf@atmel.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| */ |
| |
| #define MXT224_I2C_ADDR1 0x4A |
| #define MXT224_I2C_ADDR2 0x4B |
| #define MXT1386_I2C_ADDR1 0x4C |
| #define MXT1386_I2C_ADDR2 0x4D |
| #define MXT1386_I2C_ADDR3 0x5A |
| #define MXT1386_I2C_ADDR4 0x5B |
| |
| /* |
| * Select this address from above depending on what maXTouch |
| * chip you have and how it's address pins are configured; |
| * see datasheet. |
| */ |
| |
| #define MXT_I2C_ADDRESS MXT224_I2C_ADDR2 |
| |
| #define MXT_BL_ADDRESS 0x25 |
| |
| #define MXT224_FAMILYID 0x80 |
| #define MXT1386_FAMILYID 0xA0 |
| |
| #define MXT224_CAL_VARIANTID 0x01 |
| #define MXT224_UNCAL_VARIANTID 0x00 |
| #define MXT1386_CAL_VARIANTID 0x00 |
| |
| #define MXT_MAX_REPORTED_WIDTH 255 |
| #define MXT_MAX_REPORTED_PRESSURE 255 |
| #define MXT_MAX_TOUCH_SIZE 255 |
| #define MXT_MAX_NUM_TOUCHES 10 |
| |
| /* Fixed addresses inside maXTouch device */ |
| #define MXT_ADDR_INFO_BLOCK 0 |
| #define MXT_ADDR_OBJECT_TABLE 7 |
| #define MXT_ID_BLOCK_SIZE 7 |
| #define MXT_OBJECT_TABLE_ELEMENT_SIZE 6 |
| |
| /* Object types */ |
| #define MXT_DEBUG_DELTAS_T2 2 |
| #define MXT_DEBUG_REFERENCES_T3 3 |
| #define MXT_GEN_MESSAGEPROCESSOR_T5 5 |
| #define MXT_GEN_COMMANDPROCESSOR_T6 6 |
| #define MXT_GEN_POWERCONFIG_T7 7 |
| #define MXT_GEN_ACQUIRECONFIG_T8 8 |
| #define MXT_TOUCH_MULTITOUCHSCREEN_T9 9 |
| #define MXT_TOUCH_SINGLETOUCHSCREEN_T10 10 |
| #define MXT_TOUCH_XSLIDER_T11 11 |
| #define MXT_TOUCH_YSLIDER_T12 12 |
| #define MXT_TOUCH_XWHEEL_T13 13 |
| #define MXT_TOUCH_YWHEEL_T14 14 |
| #define MXT_TOUCH_KEYARRAY_T15 15 |
| #define MXT_SPT_GPIOPWM_T19 19 |
| #define MXT_PROCI_GRIPFACESUPPRESSION_T20 20 |
| #define MXT_PROCG_NOISESUPPRESSION_T22 22 |
| #define MXT_TOUCH_PROXIMITY_T23 23 |
| #define MXT_PROCI_ONETOUCHGESTUREPROCESSOR_T24 24 |
| #define MXT_SPT_SELFTEST_T25 25 |
| #define MXT_DEBUG_CTERANGE_T26 26 |
| #define MXT_PROCI_TWOTOUCHGESTUREPROCESSOR_T27 27 |
| #define MXT_SPT_CTECONFIG_T28 28 |
| #define MXT_TOUCH_KEYSET_T31 31 |
| #define MXT_TOUCH_XSLIDERSET_T32 32 |
| #define MXT_DEBUG_DIAGNOSTIC_T37 37 |
| #define MXT_USER_INFO_T38 38 |
| |
| |
| /* |
| * If a message is read from mXT when there's no new messages available, |
| * the report ID of the message will be 0xFF. |
| */ |
| #define MXT_END_OF_MESSAGES 0xFF |
| |
| |
| /* GEN_COMMANDPROCESSOR_T6 Register offsets from T6 base address */ |
| #define MXT_ADR_T6_RESET 0x00 |
| #define MXT_ADR_T6_BACKUPNV 0x01 |
| #define MXT_ADR_T6_CALIBRATE 0x02 |
| #define MXT_ADR_T6_REPORTALL 0x03 |
| #define MXT_ADR_T6_RESERVED 0x04 |
| #define MXT_ADR_T6_DIAGNOSTIC 0x05 |
| |
| /* T6 Debug Diagnostics Commands */ |
| #define MXT_CMD_T6_PAGE_UP 0x01 |
| #define MXT_CMD_T6_PAGE_DOWN 0x02 |
| #define MXT_CMD_T6_DELTAS_MODE 0x10 |
| #define MXT_CMD_T6_REFERENCES_MODE 0x11 |
| #define MXT_CMD_T6_CTE_MODE 0x31 |
| |
| /* T6 Backup Command */ |
| #define MXT_CMD_T6_BACKUP 0x55 |
| |
| /* SPT_DEBUG_DIAGNOSTIC_T37 Register offsets from T37 base address */ |
| #define MXT_ADR_T37_PAGE 0x01 |
| #define MXT_ADR_T37_DATA 0x02 |
| |
| |
| |
| /************************************************************************ |
| * MESSAGE OBJECTS ADDRESS FIELDS |
| * |
| ************************************************************************/ |
| #define MXT_MSG_REPORTID 0x00 |
| |
| |
| /* MXT_GEN_MESSAGEPROCESSOR_T5 Message address definitions */ |
| #define MXT_MSG_T5_REPORTID 0x00 |
| #define MXT_MSG_T5_MESSAGE 0x01 |
| #define MXT_MSG_T5_CHECKSUM 0x08 |
| |
| /* MXT_GEN_COMMANDPROCESSOR_T6 Message address definitions */ |
| #define MXT_MSG_T6_STATUS 0x01 |
| #define MXT_MSGB_T6_COMSERR 0x04 |
| #define MXT_MSGB_T6_CFGERR 0x08 |
| #define MXT_MSGB_T6_CAL 0x10 |
| #define MXT_MSGB_T6_SIGERR 0x20 |
| #define MXT_MSGB_T6_OFL 0x40 |
| #define MXT_MSGB_T6_RESET 0x80 |
| /* Three bytes */ |
| #define MXT_MSG_T6_CHECKSUM 0x02 |
| |
| /* MXT_GEN_POWERCONFIG_T7 NO Message address definitions */ |
| /* MXT_GEN_ACQUIRECONFIG_T8 Message address definitions */ |
| /* MXT_TOUCH_MULTITOUCHSCREEN_T9 Message address definitions */ |
| |
| #define MXT_MSG_T9_STATUS 0x01 |
| /* Status bit field */ |
| #define MXT_MSGB_T9_SUPPRESS 0x02 |
| #define MXT_MSGB_T9_AMP 0x04 |
| #define MXT_MSGB_T9_VECTOR 0x08 |
| #define MXT_MSGB_T9_MOVE 0x10 |
| #define MXT_MSGB_T9_RELEASE 0x20 |
| #define MXT_MSGB_T9_PRESS 0x40 |
| #define MXT_MSGB_T9_DETECT 0x80 |
| |
| #define MXT_MSG_T9_XPOSMSB 0x02 |
| #define MXT_MSG_T9_YPOSMSB 0x03 |
| #define MXT_MSG_T9_XYPOSLSB 0x04 |
| #define MXT_MSG_T9_TCHAREA 0x05 |
| #define MXT_MSG_T9_TCHAMPLITUDE 0x06 |
| #define MXT_MSG_T9_TCHVECTOR 0x07 |
| |
| |
| /* MXT_SPT_GPIOPWM_T19 Message address definitions */ |
| #define MXT_MSG_T19_STATUS 0x01 |
| |
| /* MXT_PROCI_GRIPFACESUPPRESSION_T20 Message address definitions */ |
| #define MXT_MSG_T20_STATUS 0x01 |
| #define MXT_MSGB_T20_FACE_SUPPRESS 0x01 |
| /* MXT_PROCG_NOISESUPPRESSION_T22 Message address definitions */ |
| #define MXT_MSG_T22_STATUS 0x01 |
| #define MXT_MSGB_T22_FHCHG 0x01 |
| #define MXT_MSGB_T22_GCAFERR 0x04 |
| #define MXT_MSGB_T22_FHERR 0x08 |
| #define MXT_MSG_T22_GCAFDEPTH 0x02 |
| |
| /* MXT_TOUCH_PROXIMITY_T23 Message address definitions */ |
| #define MXT_MSG_T23_STATUS 0x01 |
| #define MXT_MSGB_T23_FALL 0x20 |
| #define MXT_MSGB_T23_RISE 0x40 |
| #define MXT_MSGB_T23_DETECT 0x80 |
| /* 16 bit */ |
| #define MXT_MSG_T23_PROXDELTA 0x02 |
| |
| /* MXT_PROCI_ONETOUCHGESTUREPROCESSOR_T24 Message address definitions */ |
| #define MXT_MSG_T24_STATUS 0x01 |
| #define MXT_MSG_T24_XPOSMSB 0x02 |
| #define MXT_MSG_T24_YPOSMSB 0x03 |
| #define MXT_MSG_T24_XYPOSLSB 0x04 |
| #define MXT_MSG_T24_DIR 0x05 |
| /* 16 bit */ |
| #define MXT_MSG_T24_DIST 0x06 |
| |
| /* MXT_SPT_SELFTEST_T25 Message address definitions */ |
| #define MXT_MSG_T25_STATUS 0x01 |
| /* 5 Bytes */ |
| #define MXT_MSGR_T25_OK 0xFE |
| #define MXT_MSGR_T25_INVALID_TEST 0xFD |
| #define MXT_MSGR_T25_PIN_FAULT 0x11 |
| #define MXT_MSGR_T25_SIGNAL_LIMIT_FAULT 0x17 |
| #define MXT_MSGR_T25_GAIN_ERROR 0x20 |
| #define MXT_MSG_T25_INFO 0x02 |
| |
| /* MXT_PROCI_TWOTOUCHGESTUREPROCESSOR_T27 Message address definitions */ |
| #define MXT_MSG_T27_STATUS 0x01 |
| #define MXT_MSGB_T27_ROTATEDIR 0x10 |
| #define MXT_MSGB_T27_PINCH 0x20 |
| #define MXT_MSGB_T27_ROTATE 0x40 |
| #define MXT_MSGB_T27_STRETCH 0x80 |
| #define MXT_MSG_T27_XPOSMSB 0x02 |
| #define MXT_MSG_T27_YPOSMSB 0x03 |
| #define MXT_MSG_T27_XYPOSLSB 0x04 |
| #define MXT_MSG_T27_ANGLE 0x05 |
| |
| /* 16 bit */ |
| #define MXT_MSG_T27_SEPARATION 0x06 |
| |
| /* MXT_SPT_CTECONFIG_T28 Message address definitions */ |
| #define MXT_MSG_T28_STATUS 0x01 |
| #define MXT_MSGB_T28_CHKERR 0x01 |
| |
| |
| /* One Touch Events */ |
| #define MXT_GESTURE_RESERVED 0x00 |
| #define MXT_GESTURE_PRESS 0x01 |
| #define MXT_GESTURE_RELEASE 0x02 |
| #define MXT_GESTURE_TAP 0x03 |
| #define MXT_GESTURE_DOUBLE_TAP 0x04 |
| #define MXT_GESTURE_FLICK 0x05 |
| #define MXT_GESTURE_DRAG 0x06 |
| #define MXT_GESTURE_SHORT_PRESS 0x07 |
| #define MXT_GESTURE_LONG_PRESS 0x08 |
| #define MXT_GESTURE_REPEAT_PRESS 0x09 |
| #define MXT_GESTURE_TAP_AND_PRESS 0x0a |
| #define MXT_GESTURE_THROW 0x0b |
| |
| /* Two-touch events */ |
| #define MXT_GESTURE_STRETCH (1 << 7) |
| #define MXT_GESTURE_ROTATE (1 << 6) |
| #define MXT_GESTURE_PINCH (1 << 5) |
| #define MXT_GESTURE_ROTATEDIR (1 << 4) |
| |
| |
| |
| /* Bootloader states */ |
| #define WAITING_BOOTLOAD_COMMAND 0xC0 |
| #define WAITING_FRAME_DATA 0x80 |
| #define APP_CRC_FAIL 0x40 |
| #define FRAME_CRC_CHECK 0x02 |
| #define FRAME_CRC_PASS 0x04 |
| #define FRAME_CRC_FAIL 0x03 |
| |
| #define MXT_MAX_FRAME_SIZE 276 |
| |
| /* Debug levels */ |
| #define DEBUG_INFO 1 |
| #define DEBUG_VERBOSE 2 |
| #define DEBUG_MESSAGES 5 |
| #define DEBUG_RAW 8 |
| #define DEBUG_TRACE 10 |
| |
| /* IOCTL commands */ |
| /* TODO: get correct numbers! */ |
| #define MXT_SET_ADDRESS_IOCTL ('x' + 1) /* Sets the internal address pointer */ |
| #define MXT_RESET_IOCTL ('x' + 2) /* Resets the device */ |
| #define MXT_CALIBRATE_IOCTL ('x' + 3) /* Calibrates the device */ |
| /* Backups the current state of registers to NVM */ |
| #define MXT_BACKUP_IOCTL ('x' + 4) |
| /* |
| * Only non-touch messages can be read from the message buffer |
| * (/dev/maXTouch_messages) |
| */ |
| #define MXT_NONTOUCH_MSG_IOCTL ('x' + 5) |
| /* All messages can be read from the message buffer */ |
| #define MXT_ALL_MSG_IOCTL ('x' + 6) |
| |
| |
| /* Message buffer size. This is a ring buffer, and when full, the oldest entry |
| will be overwritten. */ |
| #define MXT_MESSAGE_BUFFER_SIZE 128 |
| |
| /* Routines for memory access within a 16 bit address space */ |
| |
| /* TODO: - won't compile if functions aren't defined*/ |
| /* Bootloader specific function prototypes. */ |
| |
| #if 0 |
| static int mxt_read_byte_bl(struct i2c_client *client, u8 *value); |
| static int mxt_read_block_bl(struct i2c_client *client, u16 length, u8 *value); |
| static int mxt_write_byte_bl(struct i2c_client *client, u8 value); |
| static int mxt_write_block_bl(struct i2c_client *client, u16 length, u8 *value); |
| #endif |
| |
| /** |
| * struct maxtouch_platform_data - includes platform specific informatio |
| * related to Atmel maXTouch touchscreen controller. |
| * |
| * @numtouch: Number of simultaneous touches supported |
| * @init_platform_hw(): Initialization function, which can for example |
| * trigger a hardware reset by toggling a GPIO pin |
| * @exit_platform_hw(): Function to run when the driver is unloaded. |
| * @valid_interrupt(): Function that checks the validity of the interrupt - |
| * function that check the validity of a interrupt (by |
| * reading the changeline interrupt pin and checking that |
| * it really is low for example). |
| * @max_x: Reported X range |
| * @max_y: Reported Y range |
| */ |
| |
| struct maxtouch_platform_data { |
| u8 numtouch; /* Number of touches to report */ |
| int (*init_platform_hw)(struct i2c_client *client); |
| int (*exit_platform_hw)(struct i2c_client *client); |
| int display_res_x; |
| int display_res_y; |
| int min_x; |
| int min_y; |
| int max_x; /* The default reported X range */ |
| int max_y; /* The default reported Y range */ |
| u8 (*valid_interrupt) (void); |
| u8 (*read_chg) (void); |
| bool wakeup; |
| int (*power_on)(bool on); |
| }; |
| |
| void mxt_hw_reset(void); |