| /* $Id: bbc_i2c.c,v 1.2 2001/04/02 09:59:08 davem Exp $ |
| * bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III |
| * platforms. |
| * |
| * Copyright (C) 2001 David S. Miller (davem@redhat.com) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <asm/oplib.h> |
| #include <asm/ebus.h> |
| #include <asm/spitfire.h> |
| #include <asm/bbc.h> |
| |
| #include "bbc_i2c.h" |
| |
| /* Convert this driver to use i2c bus layer someday... */ |
| #define I2C_PCF_PIN 0x80 |
| #define I2C_PCF_ESO 0x40 |
| #define I2C_PCF_ES1 0x20 |
| #define I2C_PCF_ES2 0x10 |
| #define I2C_PCF_ENI 0x08 |
| #define I2C_PCF_STA 0x04 |
| #define I2C_PCF_STO 0x02 |
| #define I2C_PCF_ACK 0x01 |
| |
| #define I2C_PCF_START (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK) |
| #define I2C_PCF_STOP (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK) |
| #define I2C_PCF_REPSTART ( I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK) |
| #define I2C_PCF_IDLE (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ACK) |
| |
| #define I2C_PCF_INI 0x40 /* 1 if not initialized */ |
| #define I2C_PCF_STS 0x20 |
| #define I2C_PCF_BER 0x10 |
| #define I2C_PCF_AD0 0x08 |
| #define I2C_PCF_LRB 0x08 |
| #define I2C_PCF_AAS 0x04 |
| #define I2C_PCF_LAB 0x02 |
| #define I2C_PCF_BB 0x01 |
| |
| /* The BBC devices have two I2C controllers. The first I2C controller |
| * connects mainly to configuration proms (NVRAM, cpu configuration, |
| * dimm types, etc.). Whereas the second I2C controller connects to |
| * environmental control devices such as fans and temperature sensors. |
| * The second controller also connects to the smartcard reader, if present. |
| */ |
| |
| #define NUM_CHILDREN 8 |
| struct bbc_i2c_bus { |
| struct bbc_i2c_bus *next; |
| int index; |
| spinlock_t lock; |
| void __iomem *i2c_bussel_reg; |
| void __iomem *i2c_control_regs; |
| unsigned char own, clock; |
| |
| wait_queue_head_t wq; |
| volatile int waiting; |
| |
| struct linux_ebus_device *bus_edev; |
| struct { |
| struct linux_ebus_child *device; |
| int client_claimed; |
| } devs[NUM_CHILDREN]; |
| }; |
| |
| static struct bbc_i2c_bus *all_bbc_i2c; |
| |
| struct bbc_i2c_client { |
| struct bbc_i2c_bus *bp; |
| struct linux_ebus_child *echild; |
| int bus; |
| int address; |
| }; |
| |
| static int find_device(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_CHILDREN; i++) { |
| if (bp->devs[i].device == echild) { |
| if (bp->devs[i].client_claimed) |
| return 0; |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild, int val) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_CHILDREN; i++) { |
| if (bp->devs[i].device == echild) { |
| bp->devs[i].client_claimed = val; |
| return; |
| } |
| } |
| } |
| |
| #define claim_device(BP,ECHILD) set_device_claimage(BP,ECHILD,1) |
| #define release_device(BP,ECHILD) set_device_claimage(BP,ECHILD,0) |
| |
| static struct bbc_i2c_bus *find_bus_for_device(struct linux_ebus_child *echild) |
| { |
| struct bbc_i2c_bus *bp = all_bbc_i2c; |
| |
| while (bp != NULL) { |
| if (find_device(bp, echild) != 0) |
| break; |
| bp = bp->next; |
| } |
| |
| return bp; |
| } |
| |
| struct linux_ebus_child *bbc_i2c_getdev(int index) |
| { |
| struct bbc_i2c_bus *bp = all_bbc_i2c; |
| struct linux_ebus_child *echild = NULL; |
| int curidx = 0; |
| |
| while (bp != NULL) { |
| struct bbc_i2c_bus *next = bp->next; |
| int i; |
| |
| for (i = 0; i < NUM_CHILDREN; i++) { |
| if (!(echild = bp->devs[i].device)) |
| break; |
| if (curidx == index) |
| goto out; |
| echild = NULL; |
| curidx++; |
| } |
| bp = next; |
| } |
| out: |
| if (curidx == index) |
| return echild; |
| return NULL; |
| } |
| |
| struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild) |
| { |
| struct bbc_i2c_bus *bp = find_bus_for_device(echild); |
| struct bbc_i2c_client *client; |
| |
| if (!bp) |
| return NULL; |
| client = kmalloc(sizeof(*client), GFP_KERNEL); |
| if (!client) |
| return NULL; |
| memset(client, 0, sizeof(*client)); |
| client->bp = bp; |
| client->echild = echild; |
| client->bus = echild->resource[0].start; |
| client->address = echild->resource[1].start; |
| |
| claim_device(bp, echild); |
| |
| return client; |
| } |
| |
| void bbc_i2c_detach(struct bbc_i2c_client *client) |
| { |
| struct bbc_i2c_bus *bp = client->bp; |
| struct linux_ebus_child *echild = client->echild; |
| |
| release_device(bp, echild); |
| kfree(client); |
| } |
| |
| static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) |
| { |
| DECLARE_WAITQUEUE(wait, current); |
| int limit = 32; |
| int ret = 1; |
| |
| bp->waiting = 1; |
| add_wait_queue(&bp->wq, &wait); |
| while (limit-- > 0) { |
| u8 val; |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| *status = val = readb(bp->i2c_control_regs + 0); |
| if ((val & I2C_PCF_PIN) == 0) { |
| ret = 0; |
| break; |
| } |
| msleep_interruptible(250); |
| } |
| remove_wait_queue(&bp->wq, &wait); |
| bp->waiting = 0; |
| current->state = TASK_RUNNING; |
| |
| return ret; |
| } |
| |
| int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off) |
| { |
| struct bbc_i2c_bus *bp = client->bp; |
| int address = client->address; |
| u8 status; |
| int ret = -1; |
| |
| if (bp->i2c_bussel_reg != NULL) |
| writeb(client->bus, bp->i2c_bussel_reg); |
| |
| writeb(address, bp->i2c_control_regs + 0x1); |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| writeb(off, bp->i2c_control_regs + 0x1); |
| if (wait_for_pin(bp, &status) || |
| (status & I2C_PCF_LRB) != 0) |
| goto out; |
| |
| writeb(val, bp->i2c_control_regs + 0x1); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| ret = 0; |
| |
| out: |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); |
| return ret; |
| } |
| |
| int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off) |
| { |
| struct bbc_i2c_bus *bp = client->bp; |
| unsigned char address = client->address, status; |
| int ret = -1; |
| |
| if (bp->i2c_bussel_reg != NULL) |
| writeb(client->bus, bp->i2c_bussel_reg); |
| |
| writeb(address, bp->i2c_control_regs + 0x1); |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| writeb(off, bp->i2c_control_regs + 0x1); |
| if (wait_for_pin(bp, &status) || |
| (status & I2C_PCF_LRB) != 0) |
| goto out; |
| |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); |
| |
| address |= 0x1; /* READ */ |
| |
| writeb(address, bp->i2c_control_regs + 0x1); |
| writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| /* Set PIN back to one so the device sends the first |
| * byte. |
| */ |
| (void) readb(bp->i2c_control_regs + 0x1); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0); |
| *byte = readb(bp->i2c_control_regs + 0x1); |
| if (wait_for_pin(bp, &status)) |
| goto out; |
| |
| ret = 0; |
| |
| out: |
| writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0); |
| (void) readb(bp->i2c_control_regs + 0x1); |
| |
| return ret; |
| } |
| |
| int bbc_i2c_write_buf(struct bbc_i2c_client *client, |
| char *buf, int len, int off) |
| { |
| int ret = 0; |
| |
| while (len > 0) { |
| int err = bbc_i2c_writeb(client, *buf, off); |
| |
| if (err < 0) { |
| ret = err; |
| break; |
| } |
| |
| len--; |
| buf++; |
| off++; |
| } |
| return ret; |
| } |
| |
| int bbc_i2c_read_buf(struct bbc_i2c_client *client, |
| char *buf, int len, int off) |
| { |
| int ret = 0; |
| |
| while (len > 0) { |
| int err = bbc_i2c_readb(client, buf, off); |
| if (err < 0) { |
| ret = err; |
| break; |
| } |
| len--; |
| buf++; |
| off++; |
| } |
| |
| return ret; |
| } |
| |
| EXPORT_SYMBOL(bbc_i2c_getdev); |
| EXPORT_SYMBOL(bbc_i2c_attach); |
| EXPORT_SYMBOL(bbc_i2c_detach); |
| EXPORT_SYMBOL(bbc_i2c_writeb); |
| EXPORT_SYMBOL(bbc_i2c_readb); |
| EXPORT_SYMBOL(bbc_i2c_write_buf); |
| EXPORT_SYMBOL(bbc_i2c_read_buf); |
| |
| static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct bbc_i2c_bus *bp = dev_id; |
| |
| /* PIN going from set to clear is the only event which |
| * makes the i2c assert an interrupt. |
| */ |
| if (bp->waiting && |
| !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN)) |
| wake_up(&bp->wq); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void __init reset_one_i2c(struct bbc_i2c_bus *bp) |
| { |
| writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); |
| writeb(bp->own, bp->i2c_control_regs + 0x1); |
| writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); |
| writeb(bp->clock, bp->i2c_control_regs + 0x1); |
| writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0); |
| } |
| |
| static int __init attach_one_i2c(struct linux_ebus_device *edev, int index) |
| { |
| struct bbc_i2c_bus *bp = kmalloc(sizeof(*bp), GFP_KERNEL); |
| struct linux_ebus_child *echild; |
| int entry; |
| |
| if (!bp) |
| return -ENOMEM; |
| memset(bp, 0, sizeof(*bp)); |
| |
| bp->i2c_control_regs = ioremap(edev->resource[0].start, 0x2); |
| if (!bp->i2c_control_regs) |
| goto fail; |
| |
| if (edev->num_addrs == 2) { |
| bp->i2c_bussel_reg = ioremap(edev->resource[1].start, 0x1); |
| if (!bp->i2c_bussel_reg) |
| goto fail; |
| } |
| |
| bp->waiting = 0; |
| init_waitqueue_head(&bp->wq); |
| if (request_irq(edev->irqs[0], bbc_i2c_interrupt, |
| SA_SHIRQ, "bbc_i2c", bp)) |
| goto fail; |
| |
| bp->index = index; |
| bp->bus_edev = edev; |
| |
| spin_lock_init(&bp->lock); |
| bp->next = all_bbc_i2c; |
| all_bbc_i2c = bp; |
| |
| entry = 0; |
| for (echild = edev->children; |
| echild && entry < 8; |
| echild = echild->next, entry++) { |
| bp->devs[entry].device = echild; |
| bp->devs[entry].client_claimed = 0; |
| } |
| |
| writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0); |
| bp->own = readb(bp->i2c_control_regs + 0x01); |
| writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0); |
| bp->clock = readb(bp->i2c_control_regs + 0x01); |
| |
| printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n", |
| bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock); |
| |
| reset_one_i2c(bp); |
| |
| return 0; |
| |
| fail: |
| if (bp->i2c_bussel_reg) |
| iounmap(bp->i2c_bussel_reg); |
| if (bp->i2c_control_regs) |
| iounmap(bp->i2c_control_regs); |
| kfree(bp); |
| return -EINVAL; |
| } |
| |
| static int __init bbc_present(void) |
| { |
| struct linux_ebus *ebus = NULL; |
| struct linux_ebus_device *edev = NULL; |
| |
| for_each_ebus(ebus) { |
| for_each_ebusdev(edev, ebus) { |
| if (!strcmp(edev->prom_node->name, "bbc")) |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| extern int bbc_envctrl_init(void); |
| extern void bbc_envctrl_cleanup(void); |
| static void bbc_i2c_cleanup(void); |
| |
| static int __init bbc_i2c_init(void) |
| { |
| struct linux_ebus *ebus = NULL; |
| struct linux_ebus_device *edev = NULL; |
| int err, index = 0; |
| |
| if ((tlb_type != cheetah && tlb_type != cheetah_plus) || |
| !bbc_present()) |
| return -ENODEV; |
| |
| for_each_ebus(ebus) { |
| for_each_ebusdev(edev, ebus) { |
| if (!strcmp(edev->prom_node->name, "i2c")) { |
| if (!attach_one_i2c(edev, index)) |
| index++; |
| } |
| } |
| } |
| |
| if (!index) |
| return -ENODEV; |
| |
| err = bbc_envctrl_init(); |
| if (err) |
| bbc_i2c_cleanup(); |
| return err; |
| } |
| |
| static void bbc_i2c_cleanup(void) |
| { |
| struct bbc_i2c_bus *bp = all_bbc_i2c; |
| |
| bbc_envctrl_cleanup(); |
| |
| while (bp != NULL) { |
| struct bbc_i2c_bus *next = bp->next; |
| |
| free_irq(bp->bus_edev->irqs[0], bp); |
| |
| if (bp->i2c_bussel_reg) |
| iounmap(bp->i2c_bussel_reg); |
| if (bp->i2c_control_regs) |
| iounmap(bp->i2c_control_regs); |
| |
| kfree(bp); |
| |
| bp = next; |
| } |
| all_bbc_i2c = NULL; |
| } |
| |
| module_init(bbc_i2c_init); |
| module_exit(bbc_i2c_cleanup); |
| MODULE_LICENSE("GPL"); |