| /* |
| * Copyright (c) 2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_9615_H |
| #define __ARCH_ARM_MACH_MSM_INCLUDE_MACH_RPM_REGULATOR_9615_H |
| |
| /* Pin control input signals. */ |
| #define RPM_VREG_PIN_CTRL_PM8018_D1 0x01 |
| #define RPM_VREG_PIN_CTRL_PM8018_A0 0x02 |
| #define RPM_VREG_PIN_CTRL_PM8018_A1 0x04 |
| #define RPM_VREG_PIN_CTRL_PM8018_A2 0x08 |
| |
| /** |
| * enum rpm_vreg_pin_fn_9615 - RPM regulator pin function choices |
| * %RPM_VREG_PIN_FN_9615_DONT_CARE: do not care about pin control state of |
| * the regulator; allow another master |
| * processor to specify pin control |
| * %RPM_VREG_PIN_FN_9615_ENABLE: pin control switches between disable and |
| * enable |
| * %RPM_VREG_PIN_FN_9615_MODE: pin control switches between LPM and HPM |
| * %RPM_VREG_PIN_FN_9615_SLEEP_B: regulator is forced into LPM when |
| * sleep_b signal is asserted |
| * %RPM_VREG_PIN_FN_9615_NONE: do not use pin control for the regulator |
| * and do not allow another master to |
| * request pin control |
| * |
| * The pin function specified in platform data corresponds to the active state |
| * pin function value. Pin function will be NONE until a consumer requests |
| * pin control to be enabled. |
| */ |
| enum rpm_vreg_pin_fn_9615 { |
| RPM_VREG_PIN_FN_9615_DONT_CARE, |
| RPM_VREG_PIN_FN_9615_ENABLE, |
| RPM_VREG_PIN_FN_9615_MODE, |
| RPM_VREG_PIN_FN_9615_SLEEP_B, |
| RPM_VREG_PIN_FN_9615_NONE, |
| }; |
| |
| /** |
| * enum rpm_vreg_force_mode_9615 - RPM regulator force mode choices |
| * %RPM_VREG_FORCE_MODE_9615_PIN_CTRL: allow pin control usage |
| * %RPM_VREG_FORCE_MODE_9615_NONE: do not force any mode |
| * %RPM_VREG_FORCE_MODE_9615_LPM: force into low power mode |
| * %RPM_VREG_FORCE_MODE_9615_AUTO: allow regulator to automatically select |
| * its own mode based on realtime current |
| * draw (only available for SMPS |
| * regulators) |
| * %RPM_VREG_FORCE_MODE_9615_HPM: force into high power mode |
| * %RPM_VREG_FORCE_MODE_9615_BYPASS: set regulator to use bypass mode, i.e. |
| * to act as a switch and not regulate |
| * (only available for LDO regulators) |
| * |
| * Force mode is used to override aggregation with other masters and to set |
| * special operating modes. |
| */ |
| enum rpm_vreg_force_mode_9615 { |
| RPM_VREG_FORCE_MODE_9615_PIN_CTRL = 0, |
| RPM_VREG_FORCE_MODE_9615_NONE = 0, |
| RPM_VREG_FORCE_MODE_9615_LPM, |
| RPM_VREG_FORCE_MODE_9615_AUTO, /* SMPS only */ |
| RPM_VREG_FORCE_MODE_9615_HPM, |
| RPM_VREG_FORCE_MODE_9615_BYPASS, /* LDO only */ |
| }; |
| |
| /** |
| * enum rpm_vreg_power_mode_9615 - power mode for SMPS regulators |
| * %RPM_VREG_POWER_MODE_9615_HYSTERETIC: Use hysteretic mode for HPM and when |
| * usage goes high in AUTO |
| * %RPM_VREG_POWER_MODE_9615_PWM: Use PWM mode for HPM and when usage |
| * goes high in AUTO |
| */ |
| enum rpm_vreg_power_mode_9615 { |
| RPM_VREG_POWER_MODE_9615_HYSTERETIC, |
| RPM_VREG_POWER_MODE_9615_PWM, |
| }; |
| |
| /** |
| * enum rpm_vreg_id - RPM regulator ID numbers (both real and pin control) |
| */ |
| enum rpm_vreg_id_9615 { |
| RPM_VREG_ID_PM8018_L2, |
| RPM_VREG_ID_PM8018_L3, |
| RPM_VREG_ID_PM8018_L4, |
| RPM_VREG_ID_PM8018_L5, |
| RPM_VREG_ID_PM8018_L6, |
| RPM_VREG_ID_PM8018_L7, |
| RPM_VREG_ID_PM8018_L8, |
| RPM_VREG_ID_PM8018_L9, |
| RPM_VREG_ID_PM8018_L10, |
| RPM_VREG_ID_PM8018_L11, |
| RPM_VREG_ID_PM8018_L12, |
| RPM_VREG_ID_PM8018_L13, |
| RPM_VREG_ID_PM8018_L14, |
| RPM_VREG_ID_PM8018_S1, |
| RPM_VREG_ID_PM8018_S2, |
| RPM_VREG_ID_PM8018_S3, |
| RPM_VREG_ID_PM8018_S4, |
| RPM_VREG_ID_PM8018_S5, |
| RPM_VREG_ID_PM8018_LVS1, |
| RPM_VREG_ID_PM8018_MAX_REAL = RPM_VREG_ID_PM8018_LVS1, |
| |
| /* The following are IDs for regulator devices to enable pin control. */ |
| RPM_VREG_ID_PM8018_L2_PC, |
| RPM_VREG_ID_PM8018_L3_PC, |
| RPM_VREG_ID_PM8018_L4_PC, |
| RPM_VREG_ID_PM8018_L5_PC, |
| RPM_VREG_ID_PM8018_L6_PC, |
| RPM_VREG_ID_PM8018_L7_PC, |
| RPM_VREG_ID_PM8018_L8_PC, |
| RPM_VREG_ID_PM8018_L13_PC, |
| RPM_VREG_ID_PM8018_L14_PC, |
| RPM_VREG_ID_PM8018_S1_PC, |
| RPM_VREG_ID_PM8018_S2_PC, |
| RPM_VREG_ID_PM8018_S3_PC, |
| RPM_VREG_ID_PM8018_S4_PC, |
| RPM_VREG_ID_PM8018_S5_PC, |
| RPM_VREG_ID_PM8018_LVS1_PC, |
| RPM_VREG_ID_PM8018_MAX = RPM_VREG_ID_PM8018_LVS1_PC, |
| }; |
| |
| /* Minimum high power mode loads in uA. */ |
| #define RPM_VREG_9615_LDO_50_HPM_MIN_LOAD 5000 |
| #define RPM_VREG_9615_LDO_150_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_9615_LDO_300_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_9615_LDO_1200_HPM_MIN_LOAD 10000 |
| #define RPM_VREG_9615_SMPS_1500_HPM_MIN_LOAD 100000 |
| |
| #endif |