sound/oss/trix.c - kernel/msm - Gitiles

 /*
  * sound/oss/trix.c
  *
  * Low level driver for the MediaTrix AudioTrix Pro
  * (MT-0002-PC Control Chip)
  *
  *
  * Copyright (C) by Hannu Savolainen 1993-1997
  *
  * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
  * Version 2 (June 1991). See the "COPYING" file distributed with this software
  * for more info.
  *
  * Changes
  *	Alan Cox		Modularisation, cleanup.
  *	Christoph Hellwig	Adapted to module_init/module_exit
  *	Arnaldo C. de Melo	Got rid of attach_uart401
  */

 #include <linux/init.h>
 #include <linux/module.h>

 #include "sound_config.h"
 #include "sb.h"
 #include "sound_firmware.h"

 #include "ad1848.h"
 #include "mpu401.h"

 #include "trix_boot.h"

 static int mpu;

 static int joystick;

 static unsigned char trix_read(int addr)
 {
 	outb(((unsigned char) addr), 0x390);	/* MT-0002-PC ASIC address */
 	return inb(0x391);	/* MT-0002-PC ASIC data */
 }

 static void trix_write(int addr, int data)
 {
 	outb(((unsigned char) addr), 0x390);	/* MT-0002-PC ASIC address */
 	outb(((unsigned char) data), 0x391);	/* MT-0002-PC ASIC data */
 }

 static void download_boot(int base)
 {
 	int i = 0, n = trix_boot_len;

 	if (trix_boot_len == 0)
 		return;

 	trix_write(0xf8, 0x00);	/* ??????? */
 	outb((0x01), base + 6);	/* Clear the internal data pointer */
 	outb((0x00), base + 6);	/* Restart */

 	/*
 	   *  Write the boot code to the RAM upload/download register.
 	   *  Each write increments the internal data pointer.
 	 */
 	outb((0x01), base + 6);	/* Clear the internal data pointer */
 	outb((0x1A), 0x390);	/* Select RAM download/upload port */

 	for (i = 0; i < n; i++)
 		outb((trix_boot[i]), 0x391);
 	for (i = n; i < 10016; i++)	/* Clear up to first 16 bytes of data RAM */
 		outb((0x00), 0x391);
 	outb((0x00), base + 6);	/* Reset */
 	outb((0x50), 0x390);	/* ?????? */

 }

 static int trix_set_wss_port(struct address_info *hw_config)
 {
 	unsigned char   addr_bits;

 	if (trix_read(0x15) != 0x71)	/* No ASIC signature */
 	{
 		MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n"));
 		return 0;
 	}

 	/*
 	 * Reset some registers.
 	 */

 	trix_write(0x13, 0);
 	trix_write(0x14, 0);

 	/*
 	 * Configure the ASIC to place the codec to the proper I/O location
 	 */

 	switch (hw_config->io_base)
 	{
 		case 0x530:
 			addr_bits = 0;
 			break;
 		case 0x604:
 			addr_bits = 1;
 			break;
 		case 0xE80:
 			addr_bits = 2;
 			break;
 		case 0xF40:
 			addr_bits = 3;
 			break;
 		default:
 			return 0;
 	}

 	trix_write(0x19, (trix_read(0x19) & 0x03) | addr_bits);
 	return 1;
 }

 /*
  *    Probe and attach routines for the Windows Sound System mode of
  *      AudioTrix Pro
  */

 static int __init init_trix_wss(struct address_info *hw_config)
 {
 	static unsigned char dma_bits[4] = {
 		1, 2, 0, 3
 	};
 	struct resource *ports;
 	int config_port = hw_config->io_base + 0;
 	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
 	int old_num_mixers = num_mixers;
 	u8 config, bits;
 	int ret;

 	switch(hw_config->irq) {
 	case 7:
 		bits = 8;
 		break;
 	case 9:
 		bits = 0x10;
 		break;
 	case 10:
 		bits = 0x18;
 		break;
 	case 11:
 		bits = 0x20;
 		break;
 	default:
 		printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
 		return 0;
 	}

 	switch (dma1) {
 	case 0:
 	case 1:
 	case 3:
 		break;
 	default:
 		printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1);
 		return 0;
 	}

 	switch (dma2) {
 	case -1:
 	case 0:
 	case 1:
 	case 3:
 		break;
 	default:
 		printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2);
 		return 0;
 	}

 	/*
 	 * Check if the IO port returns valid signature. The original MS Sound
 	 * system returns 0x04 while some cards (AudioTrix Pro for example)
 	 * return 0x00.
 	 */
 	ports = request_region(hw_config->io_base + 4, 4, "ad1848");
 	if (!ports) {
 		printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
 		return 0;
 	}

 	if (!request_region(hw_config->io_base, 4, "MSS config")) {
 		printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
 		release_region(hw_config->io_base + 4, 4);
 		return 0;
 	}

 	if (!trix_set_wss_port(hw_config))
 		goto fail;

 	config = inb(hw_config->io_base + 3);

 	if ((config & 0x3f) != 0x00)
 	{
 		MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base));
 		goto fail;
 	}

 	/*
 	 * Check that DMA0 is not in use with a 8 bit board.
 	 */

 	if (dma1 == 0 && config & 0x80)
 	{
 		printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n");
 		goto fail;
 	}
 	if (hw_config->irq > 9 && config & 0x80)
 	{
 		printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq);
 		goto fail;
 	}

 	ret = ad1848_detect(ports, NULL, hw_config->osp);
 	if (!ret)
 		goto fail;

 	if (joystick==1)
 		trix_write(0x15, 0x80);

 	/*
 	 * Set the IRQ and DMA addresses.
 	 */

 	outb((bits | 0x40), config_port);

 	if (dma2 == -1 || dma2 == dma1)
 	{
 		  bits |= dma_bits[dma1];
 		  dma2 = dma1;
 	}
 	else
 	{
 		unsigned char tmp;

 		tmp = trix_read(0x13) & ~30;
 		trix_write(0x13, tmp | 0x80 | (dma1 << 4));

 		tmp = trix_read(0x14) & ~30;
 		trix_write(0x14, tmp | 0x80 | (dma2 << 4));
 	}

 	outb((bits), config_port);	/* Write IRQ+DMA setup */

 	hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports,
 					  hw_config->irq,
 					  dma1,
 					  dma2,
 					  0,
 					  hw_config->osp,
 					  THIS_MODULE);

 	if (num_mixers > old_num_mixers)	/* Mixer got installed */
 	{
 		AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);	/* Line in */
 		AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
 		AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH);		/* OPL4 */
 		AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM);	/* SB */
 	}
 	return 1;

 fail:
 	release_region(hw_config->io_base, 4);
 	release_region(hw_config->io_base + 4, 4);
 	return 0;
 }

 static int __init probe_trix_sb(struct address_info *hw_config)
 {

 	int tmp;
 	unsigned char conf;
 	extern int sb_be_quiet;
 	int old_quiet;
 	static signed char irq_translate[] = {
 		-1, -1, -1, 0, 1, 2, -1, 3
 	};

 	if (trix_boot_len == 0)
 		return 0;	/* No boot code -> no fun */

 	if ((hw_config->io_base & 0xffffff8f) != 0x200)
 		return 0;

 	tmp = hw_config->irq;
 	if (tmp > 7)
 		return 0;
 	if (irq_translate[tmp] == -1)
 		return 0;

 	tmp = hw_config->dma;
 	if (tmp != 1 && tmp != 3)
 		return 0;

 	if (!request_region(hw_config->io_base, 16, "soundblaster")) {
 		printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
 		return 0;
 	}

 	conf = 0x84;		/* DMA and IRQ enable */
 	conf |= hw_config->io_base & 0x70;	/* I/O address bits */
 	conf |= irq_translate[hw_config->irq];
 	if (hw_config->dma == 3)
 		conf |= 0x08;
 	trix_write(0x1b, conf);

 	download_boot(hw_config->io_base);

 	hw_config->name = "AudioTrix SB";
 	if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
 		release_region(hw_config->io_base, 16);
 		return 0;
 	}

 	hw_config->driver_use_1 = SB_NO_MIDI | SB_NO_MIXER | SB_NO_RECORDING;

 	/* Prevent false alarms */
 	old_quiet = sb_be_quiet;
 	sb_be_quiet = 1;

 	sb_dsp_init(hw_config, THIS_MODULE);

 	sb_be_quiet = old_quiet;
 	return 1;
 }

 static int __init probe_trix_mpu(struct address_info *hw_config)
 {
 	unsigned char conf;
 	static int irq_bits[] = {
 		-1, -1, -1, 1, 2, 3, -1, 4, -1, 5
 	};

 	if (hw_config->irq > 9)
 	{
 		printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
 		return 0;
 	}
 	if (irq_bits[hw_config->irq] == -1)
 	{
 		printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
 		return 0;
 	}
 	switch (hw_config->io_base)
 	{
 		case 0x330:
 			conf = 0x00;
 			break;
 		case 0x370:
 			conf = 0x04;
 			break;
 		case 0x3b0:
 			conf = 0x08;
 			break;
 		case 0x3f0:
 			conf = 0x0c;
 			break;
 		default:
 			return 0;	/* Invalid port */
 	}

 	conf |= irq_bits[hw_config->irq] << 4;
 	trix_write(0x19, (trix_read(0x19) & 0x83) | conf);
 	hw_config->name = "AudioTrix Pro";
 	return probe_uart401(hw_config, THIS_MODULE);
 }

 static void __exit unload_trix_wss(struct address_info *hw_config)
 {
 	int dma2 = hw_config->dma2;

 	if (dma2 == -1)
 		dma2 = hw_config->dma;

 	release_region(0x390, 2);
 	release_region(hw_config->io_base, 4);

 	ad1848_unload(hw_config->io_base + 4,
 		      hw_config->irq,
 		      hw_config->dma,
 		      dma2,
 		      0);
 	sound_unload_audiodev(hw_config->slots[0]);
 }

 static inline void __exit unload_trix_mpu(struct address_info *hw_config)
 {
 	unload_uart401(hw_config);
 }

 static inline void __exit unload_trix_sb(struct address_info *hw_config)
 {
 	sb_dsp_unload(hw_config, mpu);
 }

 static struct address_info cfg;
 static struct address_info cfg2;
 static struct address_info cfg_mpu;

 static int sb;
 static int fw_load;

 static int __initdata io	= -1;
 static int __initdata irq	= -1;
 static int __initdata dma	= -1;
 static int __initdata dma2	= -1;	/* Set this for modules that need it */
 static int __initdata sb_io	= -1;
 static int __initdata sb_dma	= -1;
 static int __initdata sb_irq	= -1;
 static int __initdata mpu_io	= -1;
 static int __initdata mpu_irq	= -1;

 module_param(io, int, 0);
 module_param(irq, int, 0);
 module_param(dma, int, 0);
 module_param(dma2, int, 0);
 module_param(sb_io, int, 0);
 module_param(sb_dma, int, 0);
 module_param(sb_irq, int, 0);
 module_param(mpu_io, int, 0);
 module_param(mpu_irq, int, 0);
 module_param(joystick, bool, 0);

 static int __init init_trix(void)
 {
 	printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");

 	cfg.io_base = io;
 	cfg.irq = irq;
 	cfg.dma = dma;
 	cfg.dma2 = dma2;

 	cfg2.io_base = sb_io;
 	cfg2.irq = sb_irq;
 	cfg2.dma = sb_dma;

 	cfg_mpu.io_base = mpu_io;
 	cfg_mpu.irq = mpu_irq;

 	if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
 		printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
 		return -EINVAL;
 	}

 	if (cfg2.io_base != -1 && (cfg2.irq == -1 || cfg2.dma == -1)) {
 		printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n");
 		return -EINVAL;
 	}
 	if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) {
 		printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n");
 		return -EINVAL;
 	}
 	if (!trix_boot)
 	{
 		fw_load = 1;
 		trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin",
 						    (char **) &trix_boot);
 	}

 	if (!request_region(0x390, 2, "AudioTrix")) {
 		printk(KERN_ERR "AudioTrix: Config port I/O conflict\n");
 		return -ENODEV;
 	}

 	if (!init_trix_wss(&cfg)) {
 		release_region(0x390, 2);
 		return -ENODEV;
 	}

 	/*
 	 *    We must attach in the right order to get the firmware
 	 *      loaded up in time.
 	 */

 	if (cfg2.io_base != -1) {
 		sb = probe_trix_sb(&cfg2);
 	}

 	if (cfg_mpu.io_base != -1)
 		mpu = probe_trix_mpu(&cfg_mpu);

 	return 0;
 }

 static void __exit cleanup_trix(void)
 {
 	if (fw_load && trix_boot)
 		vfree(trix_boot);
 	if (sb)
 		unload_trix_sb(&cfg2);
 	if (mpu)
 		unload_trix_mpu(&cfg_mpu);
 	unload_trix_wss(&cfg);
 }

 module_init(init_trix);
 module_exit(cleanup_trix);

 #ifndef MODULE
 static int __init setup_trix (char *str)
 {
 	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */
 	int ints[9];

 	str = get_options(str, ARRAY_SIZE(ints), ints);

 	io	= ints[1];
 	irq	= ints[2];
 	dma	= ints[3];
 	dma2	= ints[4];
 	sb_io	= ints[5];
 	sb_irq	= ints[6];
 	sb_dma	= ints[6];
 	mpu_io	= ints[7];
 	mpu_irq	= ints[8];

 	return 1;
 }

 __setup("trix=", setup_trix);
 #endif
 MODULE_LICENSE("GPL");
	/*
	* sound/oss/trix.c
	*
	* Low level driver for the MediaTrix AudioTrix Pro
	* (MT-0002-PC Control Chip)
	*
	*
	* Copyright (C) by Hannu Savolainen 1993-1997
	*
	* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
	* Version 2 (June 1991). See the "COPYING" file distributed with this software
	* for more info.
	*
	* Changes
	* Alan Cox Modularisation, cleanup.
	* Christoph Hellwig Adapted to module_init/module_exit
	* Arnaldo C. de Melo Got rid of attach_uart401
	*/

	#include <linux/init.h>
	#include <linux/module.h>

	#include "sound_config.h"
	#include "sb.h"
	#include "sound_firmware.h"

	#include "ad1848.h"
	#include "mpu401.h"

	#include "trix_boot.h"

	static int mpu;

	static int joystick;

	static unsigned char trix_read(int addr)
	{
	outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
	return inb(0x391); /* MT-0002-PC ASIC data */
	}

	static void trix_write(int addr, int data)
	{
	outb(((unsigned char) addr), 0x390); /* MT-0002-PC ASIC address */
	outb(((unsigned char) data), 0x391); /* MT-0002-PC ASIC data */
	}

	static void download_boot(int base)
	{
	int i = 0, n = trix_boot_len;

	if (trix_boot_len == 0)
	return;

	trix_write(0xf8, 0x00); /* ??????? */
	outb((0x01), base + 6); /* Clear the internal data pointer */
	outb((0x00), base + 6); /* Restart */

	/*
	* Write the boot code to the RAM upload/download register.
	* Each write increments the internal data pointer.
	*/
	outb((0x01), base + 6); /* Clear the internal data pointer */
	outb((0x1A), 0x390); /* Select RAM download/upload port */

	for (i = 0; i < n; i++)
	outb((trix_boot[i]), 0x391);
	for (i = n; i < 10016; i++) /* Clear up to first 16 bytes of data RAM */
	outb((0x00), 0x391);
	outb((0x00), base + 6); /* Reset */
	outb((0x50), 0x390); /* ?????? */

	}

	static int trix_set_wss_port(struct address_info *hw_config)
	{
	unsigned char addr_bits;

	if (trix_read(0x15) != 0x71) /* No ASIC signature */
	{
	MDB(printk(KERN_ERR "No AudioTrix ASIC signature found\n"));
	return 0;
	}

	/*
	* Reset some registers.
	*/

	trix_write(0x13, 0);
	trix_write(0x14, 0);

	/*
	* Configure the ASIC to place the codec to the proper I/O location
	*/

	switch (hw_config->io_base)
	{
	case 0x530:
	addr_bits = 0;
	break;
	case 0x604:
	addr_bits = 1;
	break;
	case 0xE80:
	addr_bits = 2;
	break;
	case 0xF40:
	addr_bits = 3;
	break;
	default:
	return 0;
	}

	trix_write(0x19, (trix_read(0x19) & 0x03) \| addr_bits);
	return 1;
	}

	/*
	* Probe and attach routines for the Windows Sound System mode of
	* AudioTrix Pro
	*/

	static int __init init_trix_wss(struct address_info *hw_config)
	{
	static unsigned char dma_bits[4] = {
	1, 2, 0, 3
	};
	struct resource *ports;
	int config_port = hw_config->io_base + 0;
	int dma1 = hw_config->dma, dma2 = hw_config->dma2;
	int old_num_mixers = num_mixers;
	u8 config, bits;
	int ret;

	switch(hw_config->irq) {
	case 7:
	bits = 8;
	break;
	case 9:
	bits = 0x10;
	break;
	case 10:
	bits = 0x18;
	break;
	case 11:
	bits = 0x20;
	break;
	default:
	printk(KERN_ERR "AudioTrix: Bad WSS IRQ %d\n", hw_config->irq);
	return 0;
	}

	switch (dma1) {
	case 0:
	case 1:
	case 3:
	break;
	default:
	printk(KERN_ERR "AudioTrix: Bad WSS DMA %d\n", dma1);
	return 0;
	}

	switch (dma2) {
	case -1:
	case 0:
	case 1:
	case 3:
	break;
	default:
	printk(KERN_ERR "AudioTrix: Bad capture DMA %d\n", dma2);
	return 0;
	}

	/*
	* Check if the IO port returns valid signature. The original MS Sound
	* system returns 0x04 while some cards (AudioTrix Pro for example)
	* return 0x00.
	*/
	ports = request_region(hw_config->io_base + 4, 4, "ad1848");
	if (!ports) {
	printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
	return 0;
	}

	if (!request_region(hw_config->io_base, 4, "MSS config")) {
	printk(KERN_ERR "AudioTrix: MSS I/O port conflict (%x)\n", hw_config->io_base);
	release_region(hw_config->io_base + 4, 4);
	return 0;
	}

	if (!trix_set_wss_port(hw_config))
	goto fail;

	config = inb(hw_config->io_base + 3);

	if ((config & 0x3f) != 0x00)
	{
	MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x\n", hw_config->io_base));
	goto fail;
	}

	/*
	* Check that DMA0 is not in use with a 8 bit board.
	*/

	if (dma1 == 0 && config & 0x80)
	{
	printk(KERN_ERR "AudioTrix: Can't use DMA0 with a 8 bit card slot\n");
	goto fail;
	}
	if (hw_config->irq > 9 && config & 0x80)
	{
	printk(KERN_ERR "AudioTrix: Can't use IRQ%d with a 8 bit card slot\n", hw_config->irq);
	goto fail;
	}

	ret = ad1848_detect(ports, NULL, hw_config->osp);
	if (!ret)
	goto fail;

	if (joystick==1)
	trix_write(0x15, 0x80);

	/*
	* Set the IRQ and DMA addresses.
	*/

	outb((bits \| 0x40), config_port);

	if (dma2 == -1 \|\| dma2 == dma1)
	{
	bits \|= dma_bits[dma1];
	dma2 = dma1;
	}
	else
	{
	unsigned char tmp;

	tmp = trix_read(0x13) & ~30;
	trix_write(0x13, tmp \| 0x80 \| (dma1 << 4));

	tmp = trix_read(0x14) & ~30;
	trix_write(0x14, tmp \| 0x80 \| (dma2 << 4));
	}

	outb((bits), config_port); /* Write IRQ+DMA setup */

	hw_config->slots[0] = ad1848_init("AudioTrix Pro", ports,
	hw_config->irq,
	dma1,
	dma2,
	0,
	hw_config->osp,
	THIS_MODULE);

	if (num_mixers > old_num_mixers) /* Mixer got installed */
	{
	AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); /* Line in */
	AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_CD);
	AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_SYNTH); /* OPL4 */
	AD1848_REROUTE(SOUND_MIXER_SPEAKER, SOUND_MIXER_ALTPCM); /* SB */
	}
	return 1;

	fail:
	release_region(hw_config->io_base, 4);
	release_region(hw_config->io_base + 4, 4);
	return 0;
	}

	static int __init probe_trix_sb(struct address_info *hw_config)
	{

	int tmp;
	unsigned char conf;
	extern int sb_be_quiet;
	int old_quiet;
	static signed char irq_translate[] = {
	-1, -1, -1, 0, 1, 2, -1, 3
	};

	if (trix_boot_len == 0)
	return 0; /* No boot code -> no fun */

	if ((hw_config->io_base & 0xffffff8f) != 0x200)
	return 0;

	tmp = hw_config->irq;
	if (tmp > 7)
	return 0;
	if (irq_translate[tmp] == -1)
	return 0;

	tmp = hw_config->dma;
	if (tmp != 1 && tmp != 3)
	return 0;

	if (!request_region(hw_config->io_base, 16, "soundblaster")) {
	printk(KERN_ERR "AudioTrix: SB I/O port conflict (%x)\n", hw_config->io_base);
	return 0;
	}

	conf = 0x84; /* DMA and IRQ enable */
	conf \|= hw_config->io_base & 0x70; /* I/O address bits */
	conf \|= irq_translate[hw_config->irq];
	if (hw_config->dma == 3)
	conf \|= 0x08;
	trix_write(0x1b, conf);

	download_boot(hw_config->io_base);

	hw_config->name = "AudioTrix SB";
	if (!sb_dsp_detect(hw_config, 0, 0, NULL)) {
	release_region(hw_config->io_base, 16);
	return 0;
	}

	hw_config->driver_use_1 = SB_NO_MIDI \| SB_NO_MIXER \| SB_NO_RECORDING;

	/* Prevent false alarms */
	old_quiet = sb_be_quiet;
	sb_be_quiet = 1;

	sb_dsp_init(hw_config, THIS_MODULE);

	sb_be_quiet = old_quiet;
	return 1;
	}

	static int __init probe_trix_mpu(struct address_info *hw_config)
	{
	unsigned char conf;
	static int irq_bits[] = {
	-1, -1, -1, 1, 2, 3, -1, 4, -1, 5
	};

	if (hw_config->irq > 9)
	{
	printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
	return 0;
	}
	if (irq_bits[hw_config->irq] == -1)
	{
	printk(KERN_ERR "AudioTrix: Bad MPU IRQ %d\n", hw_config->irq);
	return 0;
	}
	switch (hw_config->io_base)
	{
	case 0x330:
	conf = 0x00;
	break;
	case 0x370:
	conf = 0x04;
	break;
	case 0x3b0:
	conf = 0x08;
	break;
	case 0x3f0:
	conf = 0x0c;
	break;
	default:
	return 0; /* Invalid port */
	}

	conf \|= irq_bits[hw_config->irq] << 4;
	trix_write(0x19, (trix_read(0x19) & 0x83) \| conf);
	hw_config->name = "AudioTrix Pro";
	return probe_uart401(hw_config, THIS_MODULE);
	}

	static void __exit unload_trix_wss(struct address_info *hw_config)
	{
	int dma2 = hw_config->dma2;

	if (dma2 == -1)
	dma2 = hw_config->dma;

	release_region(0x390, 2);
	release_region(hw_config->io_base, 4);

	ad1848_unload(hw_config->io_base + 4,
	hw_config->irq,
	hw_config->dma,
	dma2,
	0);
	sound_unload_audiodev(hw_config->slots[0]);
	}

	static inline void __exit unload_trix_mpu(struct address_info *hw_config)
	{
	unload_uart401(hw_config);
	}

	static inline void __exit unload_trix_sb(struct address_info *hw_config)
	{
	sb_dsp_unload(hw_config, mpu);
	}

	static struct address_info cfg;
	static struct address_info cfg2;
	static struct address_info cfg_mpu;

	static int sb;
	static int fw_load;

	static int __initdata io = -1;
	static int __initdata irq = -1;
	static int __initdata dma = -1;
	static int __initdata dma2 = -1; /* Set this for modules that need it */
	static int __initdata sb_io = -1;
	static int __initdata sb_dma = -1;
	static int __initdata sb_irq = -1;
	static int __initdata mpu_io = -1;
	static int __initdata mpu_irq = -1;

	module_param(io, int, 0);
	module_param(irq, int, 0);
	module_param(dma, int, 0);
	module_param(dma2, int, 0);
	module_param(sb_io, int, 0);
	module_param(sb_dma, int, 0);
	module_param(sb_irq, int, 0);
	module_param(mpu_io, int, 0);
	module_param(mpu_irq, int, 0);
	module_param(joystick, bool, 0);

	static int __init init_trix(void)
	{
	printk(KERN_INFO "MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996\n");

	cfg.io_base = io;
	cfg.irq = irq;
	cfg.dma = dma;
	cfg.dma2 = dma2;

	cfg2.io_base = sb_io;
	cfg2.irq = sb_irq;
	cfg2.dma = sb_dma;

	cfg_mpu.io_base = mpu_io;
	cfg_mpu.irq = mpu_irq;

	if (cfg.io_base == -1 \|\| cfg.dma == -1 \|\| cfg.irq == -1) {
	printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
	return -EINVAL;
	}

	if (cfg2.io_base != -1 && (cfg2.irq == -1 \|\| cfg2.dma == -1)) {
	printk(KERN_INFO "CONFIG_SB_IRQ and CONFIG_SB_DMA must be specified if SB_IO is set.\n");
	return -EINVAL;
	}
	if (cfg_mpu.io_base != -1 && cfg_mpu.irq == -1) {
	printk(KERN_INFO "CONFIG_MPU_IRQ must be specified if MPU_IO is set.\n");
	return -EINVAL;
	}
	if (!trix_boot)
	{
	fw_load = 1;
	trix_boot_len = mod_firmware_load("/etc/sound/trxpro.bin",
	(char **) &trix_boot);
	}

	if (!request_region(0x390, 2, "AudioTrix")) {
	printk(KERN_ERR "AudioTrix: Config port I/O conflict\n");
	return -ENODEV;
	}

	if (!init_trix_wss(&cfg)) {
	release_region(0x390, 2);
	return -ENODEV;
	}

	/*
	* We must attach in the right order to get the firmware
	* loaded up in time.
	*/

	if (cfg2.io_base != -1) {
	sb = probe_trix_sb(&cfg2);
	}

	if (cfg_mpu.io_base != -1)
	mpu = probe_trix_mpu(&cfg_mpu);

	return 0;
	}

	static void __exit cleanup_trix(void)
	{
	if (fw_load && trix_boot)
	vfree(trix_boot);
	if (sb)
	unload_trix_sb(&cfg2);
	if (mpu)
	unload_trix_mpu(&cfg_mpu);
	unload_trix_wss(&cfg);
	}

	module_init(init_trix);
	module_exit(cleanup_trix);

	#ifndef MODULE
	static int __init setup_trix (char *str)
	{
	/* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, mpu_io, mpu_irq */
	int ints[9];

	str = get_options(str, ARRAY_SIZE(ints), ints);

	io = ints[1];
	irq = ints[2];
	dma = ints[3];
	dma2 = ints[4];
	sb_io = ints[5];
	sb_irq = ints[6];
	sb_dma = ints[6];
	mpu_io = ints[7];
	mpu_irq = ints[8];

	return 1;
	}

	__setup("trix=", setup_trix);
	#endif
	MODULE_LICENSE("GPL");