include/rdma/rdma_cm.h - kernel/msm - Gitiles

 /*
  * Copyright (c) 2005 Voltaire Inc.  All rights reserved.
  * Copyright (c) 2005 Intel Corporation.  All rights reserved.
  *
  * This Software is licensed under one of the following licenses:
  *
  * 1) under the terms of the "Common Public License 1.0" a copy of which is
  *    available from the Open Source Initiative, see
  *    http://www.opensource.org/licenses/cpl.php.
  *
  * 2) under the terms of the "The BSD License" a copy of which is
  *    available from the Open Source Initiative, see
  *    http://www.opensource.org/licenses/bsd-license.php.
  *
  * 3) under the terms of the "GNU General Public License (GPL) Version 2" a
  *    copy of which is available from the Open Source Initiative, see
  *    http://www.opensource.org/licenses/gpl-license.php.
  *
  * Licensee has the right to choose one of the above licenses.
  *
  * Redistributions of source code must retain the above copyright
  * notice and one of the license notices.
  *
  * Redistributions in binary form must reproduce both the above copyright
  * notice, one of the license notices in the documentation
  * and/or other materials provided with the distribution.
  *
  */

 #if !defined(RDMA_CM_H)
 #define RDMA_CM_H

 #include <linux/socket.h>
 #include <linux/in6.h>
 #include <rdma/ib_addr.h>
 #include <rdma/ib_sa.h>

 /*
  * Upon receiving a device removal event, users must destroy the associated
  * RDMA identifier and release all resources allocated with the device.
  */
 enum rdma_cm_event_type {
 	RDMA_CM_EVENT_ADDR_RESOLVED,
 	RDMA_CM_EVENT_ADDR_ERROR,
 	RDMA_CM_EVENT_ROUTE_RESOLVED,
 	RDMA_CM_EVENT_ROUTE_ERROR,
 	RDMA_CM_EVENT_CONNECT_REQUEST,
 	RDMA_CM_EVENT_CONNECT_RESPONSE,
 	RDMA_CM_EVENT_CONNECT_ERROR,
 	RDMA_CM_EVENT_UNREACHABLE,
 	RDMA_CM_EVENT_REJECTED,
 	RDMA_CM_EVENT_ESTABLISHED,
 	RDMA_CM_EVENT_DISCONNECTED,
 	RDMA_CM_EVENT_DEVICE_REMOVAL,
 	RDMA_CM_EVENT_MULTICAST_JOIN,
 	RDMA_CM_EVENT_MULTICAST_ERROR
 };

 enum rdma_port_space {
 	RDMA_PS_SDP  = 0x0001,
 	RDMA_PS_IPOIB= 0x0002,
 	RDMA_PS_TCP  = 0x0106,
 	RDMA_PS_UDP  = 0x0111,
 	RDMA_PS_SCTP = 0x0183
 };

 struct rdma_addr {
 	struct sockaddr src_addr;
 	u8		src_pad[sizeof(struct sockaddr_in6) -
 				sizeof(struct sockaddr)];
 	struct sockaddr dst_addr;
 	u8		dst_pad[sizeof(struct sockaddr_in6) -
 				sizeof(struct sockaddr)];
 	struct rdma_dev_addr dev_addr;
 };

 struct rdma_route {
 	struct rdma_addr addr;
 	struct ib_sa_path_rec *path_rec;
 	int num_paths;
 };

 struct rdma_conn_param {
 	const void *private_data;
 	u8 private_data_len;
 	u8 responder_resources;
 	u8 initiator_depth;
 	u8 flow_control;
 	u8 retry_count;		/* ignored when accepting */
 	u8 rnr_retry_count;
 	/* Fields below ignored if a QP is created on the rdma_cm_id. */
 	u8 srq;
 	u32 qp_num;
 };

 struct rdma_ud_param {
 	const void *private_data;
 	u8 private_data_len;
 	struct ib_ah_attr ah_attr;
 	u32 qp_num;
 	u32 qkey;
 };

 struct rdma_cm_event {
 	enum rdma_cm_event_type	 event;
 	int			 status;
 	union {
 		struct rdma_conn_param	conn;
 		struct rdma_ud_param	ud;
 	} param;
 };

 struct rdma_cm_id;

 /**
  * rdma_cm_event_handler - Callback used to report user events.
  *
  * Notes: Users may not call rdma_destroy_id from this callback to destroy
  *   the passed in id, or a corresponding listen id.  Returning a
  *   non-zero value from the callback will destroy the passed in id.
  */
 typedef int (*rdma_cm_event_handler)(struct rdma_cm_id *id,
 				     struct rdma_cm_event *event);

 struct rdma_cm_id {
 	struct ib_device	*device;
 	void			*context;
 	struct ib_qp		*qp;
 	rdma_cm_event_handler	 event_handler;
 	struct rdma_route	 route;
 	enum rdma_port_space	 ps;
 	u8			 port_num;
 };

 /**
  * rdma_create_id - Create an RDMA identifier.
  *
  * @event_handler: User callback invoked to report events associated with the
  *   returned rdma_id.
  * @context: User specified context associated with the id.
  * @ps: RDMA port space.
  */
 struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler,
 				  void *context, enum rdma_port_space ps);

 /**
   * rdma_destroy_id - Destroys an RDMA identifier.
   *
   * @id: RDMA identifier.
   *
   * Note: calling this function has the effect of canceling in-flight
   * asynchronous operations associated with the id.
   */
 void rdma_destroy_id(struct rdma_cm_id *id);

 /**
  * rdma_bind_addr - Bind an RDMA identifier to a source address and
  *   associated RDMA device, if needed.
  *
  * @id: RDMA identifier.
  * @addr: Local address information.  Wildcard values are permitted.
  *
  * This associates a source address with the RDMA identifier before calling
  * rdma_listen.  If a specific local address is given, the RDMA identifier will
  * be bound to a local RDMA device.
  */
 int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr);

 /**
  * rdma_resolve_addr - Resolve destination and optional source addresses
  *   from IP addresses to an RDMA address.  If successful, the specified
  *   rdma_cm_id will be bound to a local device.
  *
  * @id: RDMA identifier.
  * @src_addr: Source address information.  This parameter may be NULL.
  * @dst_addr: Destination address information.
  * @timeout_ms: Time to wait for resolution to complete.
  */
 int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
 		      struct sockaddr *dst_addr, int timeout_ms);

 /**
  * rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier
  *   into route information needed to establish a connection.
  *
  * This is called on the client side of a connection.
  * Users must have first called rdma_resolve_addr to resolve a dst_addr
  * into an RDMA address before calling this routine.
  */
 int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms);

 /**
  * rdma_create_qp - Allocate a QP and associate it with the specified RDMA
  * identifier.
  *
  * QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA
  * through their states.
  */
 int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd,
 		   struct ib_qp_init_attr *qp_init_attr);

 /**
  * rdma_destroy_qp - Deallocate the QP associated with the specified RDMA
  * identifier.
  *
  * Users must destroy any QP associated with an RDMA identifier before
  * destroying the RDMA ID.
  */
 void rdma_destroy_qp(struct rdma_cm_id *id);

 /**
  * rdma_init_qp_attr - Initializes the QP attributes for use in transitioning
  *   to a specified QP state.
  * @id: Communication identifier associated with the QP attributes to
  *   initialize.
  * @qp_attr: On input, specifies the desired QP state.  On output, the
  *   mandatory and desired optional attributes will be set in order to
  *   modify the QP to the specified state.
  * @qp_attr_mask: The QP attribute mask that may be used to transition the
  *   QP to the specified state.
  *
  * Users must set the @qp_attr->qp_state to the desired QP state.  This call
  * will set all required attributes for the given transition, along with
  * known optional attributes.  Users may override the attributes returned from
  * this call before calling ib_modify_qp.
  *
  * Users that wish to have their QP automatically transitioned through its
  * states can associate a QP with the rdma_cm_id by calling rdma_create_qp().
  */
 int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
 		       int *qp_attr_mask);

 /**
  * rdma_connect - Initiate an active connection request.
  * @id: Connection identifier to connect.
  * @conn_param: Connection information used for connected QPs.
  *
  * Users must have resolved a route for the rdma_cm_id to connect with
  * by having called rdma_resolve_route before calling this routine.
  *
  * This call will either connect to a remote QP or obtain remote QP
  * information for unconnected rdma_cm_id's.  The actual operation is
  * based on the rdma_cm_id's port space.
  */
 int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);

 /**
  * rdma_listen - This function is called by the passive side to
  *   listen for incoming connection requests.
  *
  * Users must have bound the rdma_cm_id to a local address by calling
  * rdma_bind_addr before calling this routine.
  */
 int rdma_listen(struct rdma_cm_id *id, int backlog);

 /**
  * rdma_accept - Called to accept a connection request or response.
  * @id: Connection identifier associated with the request.
  * @conn_param: Information needed to establish the connection.  This must be
  *   provided if accepting a connection request.  If accepting a connection
  *   response, this parameter must be NULL.
  *
  * Typically, this routine is only called by the listener to accept a connection
  * request.  It must also be called on the active side of a connection if the
  * user is performing their own QP transitions.
  *
  * In the case of error, a reject message is sent to the remote side and the
  * state of the qp associated with the id is modified to error, such that any
  * previously posted receive buffers would be flushed.
  */
 int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);

 /**
  * rdma_notify - Notifies the RDMA CM of an asynchronous event that has
  * occurred on the connection.
  * @id: Connection identifier to transition to established.
  * @event: Asynchronous event.
  *
  * This routine should be invoked by users to notify the CM of relevant
  * communication events.  Events that should be reported to the CM and
  * when to report them are:
  *
  * IB_EVENT_COMM_EST - Used when a message is received on a connected
  *    QP before an RTU has been received.
  */
 int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);

 /**
  * rdma_reject - Called to reject a connection request or response.
  */
 int rdma_reject(struct rdma_cm_id *id, const void *private_data,
 		u8 private_data_len);

 /**
  * rdma_disconnect - This function disconnects the associated QP and
  *   transitions it into the error state.
  */
 int rdma_disconnect(struct rdma_cm_id *id);

 /**
  * rdma_join_multicast - Join the multicast group specified by the given
  *   address.
  * @id: Communication identifier associated with the request.
  * @addr: Multicast address identifying the group to join.
  * @context: User-defined context associated with the join request, returned
  * to the user through the private_data pointer in multicast events.
  */
 int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
 			void *context);

 /**
  * rdma_leave_multicast - Leave the multicast group specified by the given
  *   address.
  */
 void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);

 /**
  * rdma_set_service_type - Set the type of service associated with a
  *   connection identifier.
  * @id: Communication identifier to associated with service type.
  * @tos: Type of service.
  *
  * The type of service is interpretted as a differentiated service
  * field (RFC 2474).  The service type should be specified before
  * performing route resolution, as existing communication on the
  * connection identifier may be unaffected.  The type of service
  * requested may not be supported by the network to all destinations.
  */
 void rdma_set_service_type(struct rdma_cm_id *id, int tos);

 #endif /* RDMA_CM_H */
	/*
	* Copyright (c) 2005 Voltaire Inc. All rights reserved.
	* Copyright (c) 2005 Intel Corporation. All rights reserved.
	*
	* This Software is licensed under one of the following licenses:
	*
	* 1) under the terms of the "Common Public License 1.0" a copy of which is
	* available from the Open Source Initiative, see
	* http://www.opensource.org/licenses/cpl.php.
	*
	* 2) under the terms of the "The BSD License" a copy of which is
	* available from the Open Source Initiative, see
	* http://www.opensource.org/licenses/bsd-license.php.
	*
	* 3) under the terms of the "GNU General Public License (GPL) Version 2" a
	* copy of which is available from the Open Source Initiative, see
	* http://www.opensource.org/licenses/gpl-license.php.
	*
	* Licensee has the right to choose one of the above licenses.
	*
	* Redistributions of source code must retain the above copyright
	* notice and one of the license notices.
	*
	* Redistributions in binary form must reproduce both the above copyright
	* notice, one of the license notices in the documentation
	* and/or other materials provided with the distribution.
	*
	*/

	#if !defined(RDMA_CM_H)
	#define RDMA_CM_H

	#include <linux/socket.h>
	#include <linux/in6.h>
	#include <rdma/ib_addr.h>
	#include <rdma/ib_sa.h>

	/*
	* Upon receiving a device removal event, users must destroy the associated
	* RDMA identifier and release all resources allocated with the device.
	*/
	enum rdma_cm_event_type {
	RDMA_CM_EVENT_ADDR_RESOLVED,
	RDMA_CM_EVENT_ADDR_ERROR,
	RDMA_CM_EVENT_ROUTE_RESOLVED,
	RDMA_CM_EVENT_ROUTE_ERROR,
	RDMA_CM_EVENT_CONNECT_REQUEST,
	RDMA_CM_EVENT_CONNECT_RESPONSE,
	RDMA_CM_EVENT_CONNECT_ERROR,
	RDMA_CM_EVENT_UNREACHABLE,
	RDMA_CM_EVENT_REJECTED,
	RDMA_CM_EVENT_ESTABLISHED,
	RDMA_CM_EVENT_DISCONNECTED,
	RDMA_CM_EVENT_DEVICE_REMOVAL,
	RDMA_CM_EVENT_MULTICAST_JOIN,
	RDMA_CM_EVENT_MULTICAST_ERROR
	};

	enum rdma_port_space {
	RDMA_PS_SDP = 0x0001,
	RDMA_PS_IPOIB= 0x0002,
	RDMA_PS_TCP = 0x0106,
	RDMA_PS_UDP = 0x0111,
	RDMA_PS_SCTP = 0x0183
	};

	struct rdma_addr {
	struct sockaddr src_addr;
	u8 src_pad[sizeof(struct sockaddr_in6) -
	sizeof(struct sockaddr)];
	struct sockaddr dst_addr;
	u8 dst_pad[sizeof(struct sockaddr_in6) -
	sizeof(struct sockaddr)];
	struct rdma_dev_addr dev_addr;
	};

	struct rdma_route {
	struct rdma_addr addr;
	struct ib_sa_path_rec *path_rec;
	int num_paths;
	};

	struct rdma_conn_param {
	const void *private_data;
	u8 private_data_len;
	u8 responder_resources;
	u8 initiator_depth;
	u8 flow_control;
	u8 retry_count; /* ignored when accepting */
	u8 rnr_retry_count;
	/* Fields below ignored if a QP is created on the rdma_cm_id. */
	u8 srq;
	u32 qp_num;
	};

	struct rdma_ud_param {
	const void *private_data;
	u8 private_data_len;
	struct ib_ah_attr ah_attr;
	u32 qp_num;
	u32 qkey;
	};

	struct rdma_cm_event {
	enum rdma_cm_event_type event;
	int status;
	union {
	struct rdma_conn_param conn;
	struct rdma_ud_param ud;
	} param;
	};

	struct rdma_cm_id;

	/**
	* rdma_cm_event_handler - Callback used to report user events.
	*
	* Notes: Users may not call rdma_destroy_id from this callback to destroy
	* the passed in id, or a corresponding listen id. Returning a
	* non-zero value from the callback will destroy the passed in id.
	*/
	typedef int (rdma_cm_event_handler)(struct rdma_cm_id id,
	struct rdma_cm_event *event);

	struct rdma_cm_id {
	struct ib_device *device;
	void *context;
	struct ib_qp *qp;
	rdma_cm_event_handler event_handler;
	struct rdma_route route;
	enum rdma_port_space ps;
	u8 port_num;
	};

	/**
	* rdma_create_id - Create an RDMA identifier.
	*
	* @event_handler: User callback invoked to report events associated with the
	* returned rdma_id.
	* @context: User specified context associated with the id.
	* @ps: RDMA port space.
	*/
	struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler,
	void *context, enum rdma_port_space ps);

	/**
	* rdma_destroy_id - Destroys an RDMA identifier.
	*
	* @id: RDMA identifier.
	*
	* Note: calling this function has the effect of canceling in-flight
	* asynchronous operations associated with the id.
	*/
	void rdma_destroy_id(struct rdma_cm_id *id);

	/**
	* rdma_bind_addr - Bind an RDMA identifier to a source address and
	* associated RDMA device, if needed.
	*
	* @id: RDMA identifier.
	* @addr: Local address information. Wildcard values are permitted.
	*
	* This associates a source address with the RDMA identifier before calling
	* rdma_listen. If a specific local address is given, the RDMA identifier will
	* be bound to a local RDMA device.
	*/
	int rdma_bind_addr(struct rdma_cm_id id, struct sockaddr addr);

	/**
	* rdma_resolve_addr - Resolve destination and optional source addresses
	* from IP addresses to an RDMA address. If successful, the specified
	* rdma_cm_id will be bound to a local device.
	*
	* @id: RDMA identifier.
	* @src_addr: Source address information. This parameter may be NULL.
	* @dst_addr: Destination address information.
	* @timeout_ms: Time to wait for resolution to complete.
	*/
	int rdma_resolve_addr(struct rdma_cm_id id, struct sockaddr src_addr,
	struct sockaddr *dst_addr, int timeout_ms);

	/**
	* rdma_resolve_route - Resolve the RDMA address bound to the RDMA identifier
	* into route information needed to establish a connection.
	*
	* This is called on the client side of a connection.
	* Users must have first called rdma_resolve_addr to resolve a dst_addr
	* into an RDMA address before calling this routine.
	*/
	int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms);

	/**
	* rdma_create_qp - Allocate a QP and associate it with the specified RDMA
	* identifier.
	*
	* QPs allocated to an rdma_cm_id will automatically be transitioned by the CMA
	* through their states.
	*/
	int rdma_create_qp(struct rdma_cm_id id, struct ib_pd pd,
	struct ib_qp_init_attr *qp_init_attr);

	/**
	* rdma_destroy_qp - Deallocate the QP associated with the specified RDMA
	* identifier.
	*
	* Users must destroy any QP associated with an RDMA identifier before
	* destroying the RDMA ID.
	*/
	void rdma_destroy_qp(struct rdma_cm_id *id);

	/**
	* rdma_init_qp_attr - Initializes the QP attributes for use in transitioning
	* to a specified QP state.
	* @id: Communication identifier associated with the QP attributes to
	* initialize.
	* @qp_attr: On input, specifies the desired QP state. On output, the
	* mandatory and desired optional attributes will be set in order to
	* modify the QP to the specified state.
	* @qp_attr_mask: The QP attribute mask that may be used to transition the
	* QP to the specified state.
	*
	* Users must set the @qp_attr->qp_state to the desired QP state. This call
	* will set all required attributes for the given transition, along with
	* known optional attributes. Users may override the attributes returned from
	* this call before calling ib_modify_qp.
	*
	* Users that wish to have their QP automatically transitioned through its
	* states can associate a QP with the rdma_cm_id by calling rdma_create_qp().
	*/
	int rdma_init_qp_attr(struct rdma_cm_id id, struct ib_qp_attr qp_attr,
	int *qp_attr_mask);

	/**
	* rdma_connect - Initiate an active connection request.
	* @id: Connection identifier to connect.
	* @conn_param: Connection information used for connected QPs.
	*
	* Users must have resolved a route for the rdma_cm_id to connect with
	* by having called rdma_resolve_route before calling this routine.
	*
	* This call will either connect to a remote QP or obtain remote QP
	* information for unconnected rdma_cm_id's. The actual operation is
	* based on the rdma_cm_id's port space.
	*/
	int rdma_connect(struct rdma_cm_id id, struct rdma_conn_param conn_param);

	/**
	* rdma_listen - This function is called by the passive side to
	* listen for incoming connection requests.
	*
	* Users must have bound the rdma_cm_id to a local address by calling
	* rdma_bind_addr before calling this routine.
	*/
	int rdma_listen(struct rdma_cm_id *id, int backlog);

	/**
	* rdma_accept - Called to accept a connection request or response.
	* @id: Connection identifier associated with the request.
	* @conn_param: Information needed to establish the connection. This must be
	* provided if accepting a connection request. If accepting a connection
	* response, this parameter must be NULL.
	*
	* Typically, this routine is only called by the listener to accept a connection
	* request. It must also be called on the active side of a connection if the
	* user is performing their own QP transitions.
	*
	* In the case of error, a reject message is sent to the remote side and the
	* state of the qp associated with the id is modified to error, such that any
	* previously posted receive buffers would be flushed.
	*/
	int rdma_accept(struct rdma_cm_id id, struct rdma_conn_param conn_param);

	/**
	* rdma_notify - Notifies the RDMA CM of an asynchronous event that has
	* occurred on the connection.
	* @id: Connection identifier to transition to established.
	* @event: Asynchronous event.
	*
	* This routine should be invoked by users to notify the CM of relevant
	* communication events. Events that should be reported to the CM and
	* when to report them are:
	*
	* IB_EVENT_COMM_EST - Used when a message is received on a connected
	* QP before an RTU has been received.
	*/
	int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event);

	/**
	* rdma_reject - Called to reject a connection request or response.
	*/
	int rdma_reject(struct rdma_cm_id id, const void private_data,
	u8 private_data_len);

	/**
	* rdma_disconnect - This function disconnects the associated QP and
	* transitions it into the error state.
	*/
	int rdma_disconnect(struct rdma_cm_id *id);

	/**
	* rdma_join_multicast - Join the multicast group specified by the given
	* address.
	* @id: Communication identifier associated with the request.
	* @addr: Multicast address identifying the group to join.
	* @context: User-defined context associated with the join request, returned
	* to the user through the private_data pointer in multicast events.
	*/
	int rdma_join_multicast(struct rdma_cm_id id, struct sockaddr addr,
	void *context);

	/**
	* rdma_leave_multicast - Leave the multicast group specified by the given
	* address.
	*/
	void rdma_leave_multicast(struct rdma_cm_id id, struct sockaddr addr);

	/**
	* rdma_set_service_type - Set the type of service associated with a
	* connection identifier.
	* @id: Communication identifier to associated with service type.
	* @tos: Type of service.
	*
	* The type of service is interpretted as a differentiated service
	* field (RFC 2474). The service type should be specified before
	* performing route resolution, as existing communication on the
	* connection identifier may be unaffected. The type of service
	* requested may not be supported by the network to all destinations.
	*/
	void rdma_set_service_type(struct rdma_cm_id *id, int tos);

	#endif /* RDMA_CM_H */