| /*************************************************************************** |
| * |
| * Copyright (C) 2004-2008 SMSC |
| * Copyright (C) 2005-2008 ARM |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| *************************************************************************** |
| * Rewritten, heavily based on smsc911x simple driver by SMSC. |
| * Partly uses io macros from smc91x.c by Nicolas Pitre |
| * |
| * Supported devices: |
| * LAN9115, LAN9116, LAN9117, LAN9118 |
| * LAN9215, LAN9216, LAN9217, LAN9218 |
| * LAN9210, LAN9211 |
| * LAN9220, LAN9221 |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/crc32.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/sched.h> |
| #include <linux/timer.h> |
| #include <linux/bug.h> |
| #include <linux/bitops.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| #include <linux/swab.h> |
| #include <linux/phy.h> |
| #include <linux/smsc911x.h> |
| #include <linux/device.h> |
| #include "smsc911x.h" |
| |
| #define SMSC_CHIPNAME "smsc911x" |
| #define SMSC_MDIONAME "smsc911x-mdio" |
| #define SMSC_DRV_VERSION "2008-10-21" |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(SMSC_DRV_VERSION); |
| MODULE_ALIAS("platform:smsc911x"); |
| |
| #if USE_DEBUG > 0 |
| static int debug = 16; |
| #else |
| static int debug = 3; |
| #endif |
| |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| |
| struct smsc911x_data; |
| |
| struct smsc911x_ops { |
| u32 (*reg_read)(struct smsc911x_data *pdata, u32 reg); |
| void (*reg_write)(struct smsc911x_data *pdata, u32 reg, u32 val); |
| void (*rx_readfifo)(struct smsc911x_data *pdata, |
| unsigned int *buf, unsigned int wordcount); |
| void (*tx_writefifo)(struct smsc911x_data *pdata, |
| unsigned int *buf, unsigned int wordcount); |
| }; |
| |
| struct smsc911x_data { |
| void __iomem *ioaddr; |
| |
| unsigned int idrev; |
| |
| /* used to decide which workarounds apply */ |
| unsigned int generation; |
| |
| /* device configuration (copied from platform_data during probe) */ |
| struct smsc911x_platform_config config; |
| |
| /* This needs to be acquired before calling any of below: |
| * smsc911x_mac_read(), smsc911x_mac_write() |
| */ |
| spinlock_t mac_lock; |
| |
| /* spinlock to ensure register accesses are serialised */ |
| spinlock_t dev_lock; |
| |
| struct phy_device *phy_dev; |
| struct mii_bus *mii_bus; |
| int phy_irq[PHY_MAX_ADDR]; |
| unsigned int using_extphy; |
| int last_duplex; |
| int last_carrier; |
| |
| u32 msg_enable; |
| unsigned int gpio_setting; |
| unsigned int gpio_orig_setting; |
| struct net_device *dev; |
| struct napi_struct napi; |
| |
| unsigned int software_irq_signal; |
| |
| #ifdef USE_PHY_WORK_AROUND |
| #define MIN_PACKET_SIZE (64) |
| char loopback_tx_pkt[MIN_PACKET_SIZE]; |
| char loopback_rx_pkt[MIN_PACKET_SIZE]; |
| unsigned int resetcount; |
| #endif |
| |
| /* Members for Multicast filter workaround */ |
| unsigned int multicast_update_pending; |
| unsigned int set_bits_mask; |
| unsigned int clear_bits_mask; |
| unsigned int hashhi; |
| unsigned int hashlo; |
| |
| /* register access functions */ |
| const struct smsc911x_ops *ops; |
| }; |
| |
| /* Easy access to information */ |
| #define __smsc_shift(pdata, reg) ((reg) << ((pdata)->config.shift)) |
| |
| static inline u32 __smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) |
| { |
| if (pdata->config.flags & SMSC911X_USE_32BIT) |
| return readl(pdata->ioaddr + reg); |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) |
| return ((readw(pdata->ioaddr + reg) & 0xFFFF) | |
| ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); |
| |
| BUG(); |
| return 0; |
| } |
| |
| static inline u32 |
| __smsc911x_reg_read_shift(struct smsc911x_data *pdata, u32 reg) |
| { |
| if (pdata->config.flags & SMSC911X_USE_32BIT) |
| return readl(pdata->ioaddr + __smsc_shift(pdata, reg)); |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) |
| return (readw(pdata->ioaddr + |
| __smsc_shift(pdata, reg)) & 0xFFFF) | |
| ((readw(pdata->ioaddr + |
| __smsc_shift(pdata, reg + 2)) & 0xFFFF) << 16); |
| |
| BUG(); |
| return 0; |
| } |
| |
| static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) |
| { |
| u32 data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| data = pdata->ops->reg_read(pdata, reg); |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| |
| return data; |
| } |
| |
| static inline void __smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, |
| u32 val) |
| { |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| writel(val, pdata->ioaddr + reg); |
| return; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| writew(val & 0xFFFF, pdata->ioaddr + reg); |
| writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); |
| return; |
| } |
| |
| BUG(); |
| } |
| |
| static inline void |
| __smsc911x_reg_write_shift(struct smsc911x_data *pdata, u32 reg, u32 val) |
| { |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| writel(val, pdata->ioaddr + __smsc_shift(pdata, reg)); |
| return; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| writew(val & 0xFFFF, |
| pdata->ioaddr + __smsc_shift(pdata, reg)); |
| writew((val >> 16) & 0xFFFF, |
| pdata->ioaddr + __smsc_shift(pdata, reg + 2)); |
| return; |
| } |
| |
| BUG(); |
| } |
| |
| static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, |
| u32 val) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| pdata->ops->reg_write(pdata, reg, val); |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| } |
| |
| /* Writes a packet to the TX_DATA_FIFO */ |
| static inline void |
| smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, |
| unsigned int wordcount) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| |
| if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| while (wordcount--) |
| __smsc911x_reg_write(pdata, TX_DATA_FIFO, |
| swab32(*buf++)); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| while (wordcount--) |
| __smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); |
| goto out; |
| } |
| |
| BUG(); |
| out: |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| } |
| |
| /* Writes a packet to the TX_DATA_FIFO - shifted version */ |
| static inline void |
| smsc911x_tx_writefifo_shift(struct smsc911x_data *pdata, unsigned int *buf, |
| unsigned int wordcount) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| |
| if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| while (wordcount--) |
| __smsc911x_reg_write_shift(pdata, TX_DATA_FIFO, |
| swab32(*buf++)); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| writesl(pdata->ioaddr + __smsc_shift(pdata, |
| TX_DATA_FIFO), buf, wordcount); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| while (wordcount--) |
| __smsc911x_reg_write_shift(pdata, |
| TX_DATA_FIFO, *buf++); |
| goto out; |
| } |
| |
| BUG(); |
| out: |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| } |
| |
| /* Reads a packet out of the RX_DATA_FIFO */ |
| static inline void |
| smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, |
| unsigned int wordcount) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| |
| if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| while (wordcount--) |
| *buf++ = swab32(__smsc911x_reg_read(pdata, |
| RX_DATA_FIFO)); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| while (wordcount--) |
| *buf++ = __smsc911x_reg_read(pdata, RX_DATA_FIFO); |
| goto out; |
| } |
| |
| BUG(); |
| out: |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| } |
| |
| /* Reads a packet out of the RX_DATA_FIFO - shifted version */ |
| static inline void |
| smsc911x_rx_readfifo_shift(struct smsc911x_data *pdata, unsigned int *buf, |
| unsigned int wordcount) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&pdata->dev_lock, flags); |
| |
| if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| while (wordcount--) |
| *buf++ = swab32(__smsc911x_reg_read_shift(pdata, |
| RX_DATA_FIFO)); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| readsl(pdata->ioaddr + __smsc_shift(pdata, |
| RX_DATA_FIFO), buf, wordcount); |
| goto out; |
| } |
| |
| if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| while (wordcount--) |
| *buf++ = __smsc911x_reg_read_shift(pdata, |
| RX_DATA_FIFO); |
| goto out; |
| } |
| |
| BUG(); |
| out: |
| spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| } |
| |
| /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read |
| * and smsc911x_mac_write, so assumes mac_lock is held */ |
| static int smsc911x_mac_complete(struct smsc911x_data *pdata) |
| { |
| int i; |
| u32 val; |
| |
| SMSC_ASSERT_MAC_LOCK(pdata); |
| |
| for (i = 0; i < 40; i++) { |
| val = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| if (!(val & MAC_CSR_CMD_CSR_BUSY_)) |
| return 0; |
| } |
| SMSC_WARN(pdata, hw, "Timed out waiting for MAC not BUSY. " |
| "MAC_CSR_CMD: 0x%08X", val); |
| return -EIO; |
| } |
| |
| /* Fetches a MAC register value. Assumes mac_lock is acquired */ |
| static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) |
| { |
| unsigned int temp; |
| |
| SMSC_ASSERT_MAC_LOCK(pdata); |
| |
| temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { |
| SMSC_WARN(pdata, hw, "MAC busy at entry"); |
| return 0xFFFFFFFF; |
| } |
| |
| /* Send the MAC cmd */ |
| smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | |
| MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); |
| |
| /* Workaround for hardware read-after-write restriction */ |
| temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| |
| /* Wait for the read to complete */ |
| if (likely(smsc911x_mac_complete(pdata) == 0)) |
| return smsc911x_reg_read(pdata, MAC_CSR_DATA); |
| |
| SMSC_WARN(pdata, hw, "MAC busy after read"); |
| return 0xFFFFFFFF; |
| } |
| |
| /* Set a mac register, mac_lock must be acquired before calling */ |
| static void smsc911x_mac_write(struct smsc911x_data *pdata, |
| unsigned int offset, u32 val) |
| { |
| unsigned int temp; |
| |
| SMSC_ASSERT_MAC_LOCK(pdata); |
| |
| temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { |
| SMSC_WARN(pdata, hw, |
| "smsc911x_mac_write failed, MAC busy at entry"); |
| return; |
| } |
| |
| /* Send data to write */ |
| smsc911x_reg_write(pdata, MAC_CSR_DATA, val); |
| |
| /* Write the actual data */ |
| smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | |
| MAC_CSR_CMD_CSR_BUSY_)); |
| |
| /* Workaround for hardware read-after-write restriction */ |
| temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| |
| /* Wait for the write to complete */ |
| if (likely(smsc911x_mac_complete(pdata) == 0)) |
| return; |
| |
| SMSC_WARN(pdata, hw, "smsc911x_mac_write failed, MAC busy after write"); |
| } |
| |
| /* Get a phy register */ |
| static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) |
| { |
| struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; |
| unsigned long flags; |
| unsigned int addr; |
| int i, reg; |
| |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| |
| /* Confirm MII not busy */ |
| if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_read???"); |
| reg = -EIO; |
| goto out; |
| } |
| |
| /* Set the address, index & direction (read from PHY) */ |
| addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); |
| smsc911x_mac_write(pdata, MII_ACC, addr); |
| |
| /* Wait for read to complete w/ timeout */ |
| for (i = 0; i < 100; i++) |
| if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| reg = smsc911x_mac_read(pdata, MII_DATA); |
| goto out; |
| } |
| |
| SMSC_WARN(pdata, hw, "Timed out waiting for MII read to finish"); |
| reg = -EIO; |
| |
| out: |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| return reg; |
| } |
| |
| /* Set a phy register */ |
| static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, |
| u16 val) |
| { |
| struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; |
| unsigned long flags; |
| unsigned int addr; |
| int i, reg; |
| |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| |
| /* Confirm MII not busy */ |
| if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| SMSC_WARN(pdata, hw, "MII is busy in smsc911x_mii_write???"); |
| reg = -EIO; |
| goto out; |
| } |
| |
| /* Put the data to write in the MAC */ |
| smsc911x_mac_write(pdata, MII_DATA, val); |
| |
| /* Set the address, index & direction (write to PHY) */ |
| addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | |
| MII_ACC_MII_WRITE_; |
| smsc911x_mac_write(pdata, MII_ACC, addr); |
| |
| /* Wait for write to complete w/ timeout */ |
| for (i = 0; i < 100; i++) |
| if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| reg = 0; |
| goto out; |
| } |
| |
| SMSC_WARN(pdata, hw, "Timed out waiting for MII write to finish"); |
| reg = -EIO; |
| |
| out: |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| return reg; |
| } |
| |
| /* Switch to external phy. Assumes tx and rx are stopped. */ |
| static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) |
| { |
| unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); |
| |
| /* Disable phy clocks to the MAC */ |
| hwcfg &= (~HW_CFG_PHY_CLK_SEL_); |
| hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; |
| smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| udelay(10); /* Enough time for clocks to stop */ |
| |
| /* Switch to external phy */ |
| hwcfg |= HW_CFG_EXT_PHY_EN_; |
| smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| |
| /* Enable phy clocks to the MAC */ |
| hwcfg &= (~HW_CFG_PHY_CLK_SEL_); |
| hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; |
| smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| udelay(10); /* Enough time for clocks to restart */ |
| |
| hwcfg |= HW_CFG_SMI_SEL_; |
| smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| } |
| |
| /* Autodetects and enables external phy if present on supported chips. |
| * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY |
| * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ |
| static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) |
| { |
| unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); |
| |
| if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { |
| SMSC_TRACE(pdata, hw, "Forcing internal PHY"); |
| pdata->using_extphy = 0; |
| } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { |
| SMSC_TRACE(pdata, hw, "Forcing external PHY"); |
| smsc911x_phy_enable_external(pdata); |
| pdata->using_extphy = 1; |
| } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { |
| SMSC_TRACE(pdata, hw, |
| "HW_CFG EXT_PHY_DET set, using external PHY"); |
| smsc911x_phy_enable_external(pdata); |
| pdata->using_extphy = 1; |
| } else { |
| SMSC_TRACE(pdata, hw, |
| "HW_CFG EXT_PHY_DET clear, using internal PHY"); |
| pdata->using_extphy = 0; |
| } |
| } |
| |
| /* Fetches a tx status out of the status fifo */ |
| static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) |
| { |
| unsigned int result = |
| smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; |
| |
| if (result != 0) |
| result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); |
| |
| return result; |
| } |
| |
| /* Fetches the next rx status */ |
| static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) |
| { |
| unsigned int result = |
| smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; |
| |
| if (result != 0) |
| result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); |
| |
| return result; |
| } |
| |
| #ifdef USE_PHY_WORK_AROUND |
| static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) |
| { |
| unsigned int tries; |
| u32 wrsz; |
| u32 rdsz; |
| ulong bufp; |
| |
| for (tries = 0; tries < 10; tries++) { |
| unsigned int txcmd_a; |
| unsigned int txcmd_b; |
| unsigned int status; |
| unsigned int pktlength; |
| unsigned int i; |
| |
| /* Zero-out rx packet memory */ |
| memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); |
| |
| /* Write tx packet to 118 */ |
| txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; |
| txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; |
| txcmd_a |= MIN_PACKET_SIZE; |
| |
| txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; |
| |
| smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); |
| smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); |
| |
| bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); |
| wrsz = MIN_PACKET_SIZE + 3; |
| wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); |
| wrsz >>= 2; |
| |
| pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); |
| |
| /* Wait till transmit is done */ |
| i = 60; |
| do { |
| udelay(5); |
| status = smsc911x_tx_get_txstatus(pdata); |
| } while ((i--) && (!status)); |
| |
| if (!status) { |
| SMSC_WARN(pdata, hw, |
| "Failed to transmit during loopback test"); |
| continue; |
| } |
| if (status & TX_STS_ES_) { |
| SMSC_WARN(pdata, hw, |
| "Transmit encountered errors during loopback test"); |
| continue; |
| } |
| |
| /* Wait till receive is done */ |
| i = 60; |
| do { |
| udelay(5); |
| status = smsc911x_rx_get_rxstatus(pdata); |
| } while ((i--) && (!status)); |
| |
| if (!status) { |
| SMSC_WARN(pdata, hw, |
| "Failed to receive during loopback test"); |
| continue; |
| } |
| if (status & RX_STS_ES_) { |
| SMSC_WARN(pdata, hw, |
| "Receive encountered errors during loopback test"); |
| continue; |
| } |
| |
| pktlength = ((status & 0x3FFF0000UL) >> 16); |
| bufp = (ulong)pdata->loopback_rx_pkt; |
| rdsz = pktlength + 3; |
| rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); |
| rdsz >>= 2; |
| |
| pdata->ops->rx_readfifo(pdata, (unsigned int *)bufp, rdsz); |
| |
| if (pktlength != (MIN_PACKET_SIZE + 4)) { |
| SMSC_WARN(pdata, hw, "Unexpected packet size " |
| "during loop back test, size=%d, will retry", |
| pktlength); |
| } else { |
| unsigned int j; |
| int mismatch = 0; |
| for (j = 0; j < MIN_PACKET_SIZE; j++) { |
| if (pdata->loopback_tx_pkt[j] |
| != pdata->loopback_rx_pkt[j]) { |
| mismatch = 1; |
| break; |
| } |
| } |
| if (!mismatch) { |
| SMSC_TRACE(pdata, hw, "Successfully verified " |
| "loopback packet"); |
| return 0; |
| } else { |
| SMSC_WARN(pdata, hw, "Data mismatch " |
| "during loop back test, will retry"); |
| } |
| } |
| } |
| |
| return -EIO; |
| } |
| |
| static int smsc911x_phy_reset(struct smsc911x_data *pdata) |
| { |
| struct phy_device *phy_dev = pdata->phy_dev; |
| unsigned int temp; |
| unsigned int i = 100000; |
| |
| BUG_ON(!phy_dev); |
| BUG_ON(!phy_dev->bus); |
| |
| SMSC_TRACE(pdata, hw, "Performing PHY BCR Reset"); |
| smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); |
| do { |
| msleep(1); |
| temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, |
| MII_BMCR); |
| } while ((i--) && (temp & BMCR_RESET)); |
| |
| if (temp & BMCR_RESET) { |
| SMSC_WARN(pdata, hw, "PHY reset failed to complete"); |
| return -EIO; |
| } |
| /* Extra delay required because the phy may not be completed with |
| * its reset when BMCR_RESET is cleared. Specs say 256 uS is |
| * enough delay but using 1ms here to be safe */ |
| msleep(1); |
| |
| return 0; |
| } |
| |
| static int smsc911x_phy_loopbacktest(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| struct phy_device *phy_dev = pdata->phy_dev; |
| int result = -EIO; |
| unsigned int i, val; |
| unsigned long flags; |
| |
| /* Initialise tx packet using broadcast destination address */ |
| memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); |
| |
| /* Use incrementing source address */ |
| for (i = 6; i < 12; i++) |
| pdata->loopback_tx_pkt[i] = (char)i; |
| |
| /* Set length type field */ |
| pdata->loopback_tx_pkt[12] = 0x00; |
| pdata->loopback_tx_pkt[13] = 0x00; |
| |
| for (i = 14; i < MIN_PACKET_SIZE; i++) |
| pdata->loopback_tx_pkt[i] = (char)i; |
| |
| val = smsc911x_reg_read(pdata, HW_CFG); |
| val &= HW_CFG_TX_FIF_SZ_; |
| val |= HW_CFG_SF_; |
| smsc911x_reg_write(pdata, HW_CFG, val); |
| |
| smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); |
| smsc911x_reg_write(pdata, RX_CFG, |
| (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); |
| |
| for (i = 0; i < 10; i++) { |
| /* Set PHY to 10/FD, no ANEG, and loopback mode */ |
| smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, |
| BMCR_LOOPBACK | BMCR_FULLDPLX); |
| |
| /* Enable MAC tx/rx, FD */ |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ |
| | MAC_CR_TXEN_ | MAC_CR_RXEN_); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| |
| if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { |
| result = 0; |
| break; |
| } |
| pdata->resetcount++; |
| |
| /* Disable MAC rx */ |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| smsc911x_mac_write(pdata, MAC_CR, 0); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| |
| smsc911x_phy_reset(pdata); |
| } |
| |
| /* Disable MAC */ |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| smsc911x_mac_write(pdata, MAC_CR, 0); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| |
| /* Cancel PHY loopback mode */ |
| smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); |
| |
| smsc911x_reg_write(pdata, TX_CFG, 0); |
| smsc911x_reg_write(pdata, RX_CFG, 0); |
| |
| return result; |
| } |
| #endif /* USE_PHY_WORK_AROUND */ |
| |
| static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) |
| { |
| struct phy_device *phy_dev = pdata->phy_dev; |
| u32 afc = smsc911x_reg_read(pdata, AFC_CFG); |
| u32 flow; |
| unsigned long flags; |
| |
| if (phy_dev->duplex == DUPLEX_FULL) { |
| u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); |
| u16 rmtadv = phy_read(phy_dev, MII_LPA); |
| u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| if (cap & FLOW_CTRL_RX) |
| flow = 0xFFFF0002; |
| else |
| flow = 0; |
| |
| if (cap & FLOW_CTRL_TX) |
| afc |= 0xF; |
| else |
| afc &= ~0xF; |
| |
| SMSC_TRACE(pdata, hw, "rx pause %s, tx pause %s", |
| (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), |
| (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); |
| } else { |
| SMSC_TRACE(pdata, hw, "half duplex"); |
| flow = 0; |
| afc |= 0xF; |
| } |
| |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| smsc911x_mac_write(pdata, FLOW, flow); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| |
| smsc911x_reg_write(pdata, AFC_CFG, afc); |
| } |
| |
| /* Update link mode if anything has changed. Called periodically when the |
| * PHY is in polling mode, even if nothing has changed. */ |
| static void smsc911x_phy_adjust_link(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| struct phy_device *phy_dev = pdata->phy_dev; |
| unsigned long flags; |
| int carrier; |
| |
| if (phy_dev->duplex != pdata->last_duplex) { |
| unsigned int mac_cr; |
| SMSC_TRACE(pdata, hw, "duplex state has changed"); |
| |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| if (phy_dev->duplex) { |
| SMSC_TRACE(pdata, hw, |
| "configuring for full duplex mode"); |
| mac_cr |= MAC_CR_FDPX_; |
| } else { |
| SMSC_TRACE(pdata, hw, |
| "configuring for half duplex mode"); |
| mac_cr &= ~MAC_CR_FDPX_; |
| } |
| smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| |
| smsc911x_phy_update_flowcontrol(pdata); |
| pdata->last_duplex = phy_dev->duplex; |
| } |
| |
| carrier = netif_carrier_ok(dev); |
| if (carrier != pdata->last_carrier) { |
| SMSC_TRACE(pdata, hw, "carrier state has changed"); |
| if (carrier) { |
| SMSC_TRACE(pdata, hw, "configuring for carrier OK"); |
| if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && |
| (!pdata->using_extphy)) { |
| /* Restore original GPIO configuration */ |
| pdata->gpio_setting = pdata->gpio_orig_setting; |
| smsc911x_reg_write(pdata, SMSC_GPIO_CFG, |
| pdata->gpio_setting); |
| } |
| } else { |
| SMSC_TRACE(pdata, hw, "configuring for no carrier"); |
| /* Check global setting that LED1 |
| * usage is 10/100 indicator */ |
| pdata->gpio_setting = smsc911x_reg_read(pdata, |
| SMSC_GPIO_CFG); |
| if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && |
| (!pdata->using_extphy)) { |
| /* Force 10/100 LED off, after saving |
| * original GPIO configuration */ |
| pdata->gpio_orig_setting = pdata->gpio_setting; |
| |
| pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; |
| pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ |
| | GPIO_CFG_GPIODIR0_ |
| | GPIO_CFG_GPIOD0_); |
| smsc911x_reg_write(pdata, SMSC_GPIO_CFG, |
| pdata->gpio_setting); |
| } |
| } |
| pdata->last_carrier = carrier; |
| } |
| } |
| |
| static int smsc911x_mii_probe(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| struct phy_device *phydev = NULL; |
| int ret; |
| |
| /* find the first phy */ |
| phydev = phy_find_first(pdata->mii_bus); |
| if (!phydev) { |
| netdev_err(dev, "no PHY found\n"); |
| return -ENODEV; |
| } |
| |
| SMSC_TRACE(pdata, probe, "PHY: addr %d, phy_id 0x%08X", |
| phydev->addr, phydev->phy_id); |
| |
| ret = phy_connect_direct(dev, phydev, |
| &smsc911x_phy_adjust_link, 0, |
| pdata->config.phy_interface); |
| |
| if (ret) { |
| netdev_err(dev, "Could not attach to PHY\n"); |
| return ret; |
| } |
| |
| netdev_info(dev, |
| "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", |
| phydev->drv->name, dev_name(&phydev->dev), phydev->irq); |
| |
| /* mask with MAC supported features */ |
| phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | |
| SUPPORTED_Asym_Pause); |
| phydev->advertising = phydev->supported; |
| |
| pdata->phy_dev = phydev; |
| pdata->last_duplex = -1; |
| pdata->last_carrier = -1; |
| |
| #ifdef USE_PHY_WORK_AROUND |
| if (smsc911x_phy_loopbacktest(dev) < 0) { |
| SMSC_WARN(pdata, hw, "Failed Loop Back Test"); |
| return -ENODEV; |
| } |
| SMSC_TRACE(pdata, hw, "Passed Loop Back Test"); |
| #endif /* USE_PHY_WORK_AROUND */ |
| |
| SMSC_TRACE(pdata, hw, "phy initialised successfully"); |
| return 0; |
| } |
| |
| static int __devinit smsc911x_mii_init(struct platform_device *pdev, |
| struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| int err = -ENXIO, i; |
| |
| pdata->mii_bus = mdiobus_alloc(); |
| if (!pdata->mii_bus) { |
| err = -ENOMEM; |
| goto err_out_1; |
| } |
| |
| pdata->mii_bus->name = SMSC_MDIONAME; |
| snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); |
| pdata->mii_bus->priv = pdata; |
| pdata->mii_bus->read = smsc911x_mii_read; |
| pdata->mii_bus->write = smsc911x_mii_write; |
| pdata->mii_bus->irq = pdata->phy_irq; |
| for (i = 0; i < PHY_MAX_ADDR; ++i) |
| pdata->mii_bus->irq[i] = PHY_POLL; |
| |
| pdata->mii_bus->parent = &pdev->dev; |
| |
| switch (pdata->idrev & 0xFFFF0000) { |
| case 0x01170000: |
| case 0x01150000: |
| case 0x117A0000: |
| case 0x115A0000: |
| /* External PHY supported, try to autodetect */ |
| smsc911x_phy_initialise_external(pdata); |
| break; |
| default: |
| SMSC_TRACE(pdata, hw, "External PHY is not supported, " |
| "using internal PHY"); |
| pdata->using_extphy = 0; |
| break; |
| } |
| |
| if (!pdata->using_extphy) { |
| /* Mask all PHYs except ID 1 (internal) */ |
| pdata->mii_bus->phy_mask = ~(1 << 1); |
| } |
| |
| if (mdiobus_register(pdata->mii_bus)) { |
| SMSC_WARN(pdata, probe, "Error registering mii bus"); |
| goto err_out_free_bus_2; |
| } |
| |
| if (smsc911x_mii_probe(dev) < 0) { |
| SMSC_WARN(pdata, probe, "Error registering mii bus"); |
| goto err_out_unregister_bus_3; |
| } |
| |
| return 0; |
| |
| err_out_unregister_bus_3: |
| mdiobus_unregister(pdata->mii_bus); |
| err_out_free_bus_2: |
| mdiobus_free(pdata->mii_bus); |
| err_out_1: |
| return err; |
| } |
| |
| /* Gets the number of tx statuses in the fifo */ |
| static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) |
| { |
| return (smsc911x_reg_read(pdata, TX_FIFO_INF) |
| & TX_FIFO_INF_TSUSED_) >> 16; |
| } |
| |
| /* Reads tx statuses and increments counters where necessary */ |
| static void smsc911x_tx_update_txcounters(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned int tx_stat; |
| |
| while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { |
| if (unlikely(tx_stat & 0x80000000)) { |
| /* In this driver the packet tag is used as the packet |
| * length. Since a packet length can never reach the |
| * size of 0x8000, this bit is reserved. It is worth |
| * noting that the "reserved bit" in the warning above |
| * does not reference a hardware defined reserved bit |
| * but rather a driver defined one. |
| */ |
| SMSC_WARN(pdata, hw, "Packet tag reserved bit is high"); |
| } else { |
| if (unlikely(tx_stat & TX_STS_ES_)) { |
| dev->stats.tx_errors++; |
| } else { |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes += (tx_stat >> 16); |
| } |
| if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { |
| dev->stats.collisions += 16; |
| dev->stats.tx_aborted_errors += 1; |
| } else { |
| dev->stats.collisions += |
| ((tx_stat >> 3) & 0xF); |
| } |
| if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) |
| dev->stats.tx_carrier_errors += 1; |
| if (unlikely(tx_stat & TX_STS_LATE_COL_)) { |
| dev->stats.collisions++; |
| dev->stats.tx_aborted_errors++; |
| } |
| } |
| } |
| } |
| |
| /* Increments the Rx error counters */ |
| static void |
| smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) |
| { |
| int crc_err = 0; |
| |
| if (unlikely(rxstat & RX_STS_ES_)) { |
| dev->stats.rx_errors++; |
| if (unlikely(rxstat & RX_STS_CRC_ERR_)) { |
| dev->stats.rx_crc_errors++; |
| crc_err = 1; |
| } |
| } |
| if (likely(!crc_err)) { |
| if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && |
| (rxstat & RX_STS_LENGTH_ERR_))) |
| dev->stats.rx_length_errors++; |
| if (rxstat & RX_STS_MCAST_) |
| dev->stats.multicast++; |
| } |
| } |
| |
| /* Quickly dumps bad packets */ |
| static void |
| smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) |
| { |
| unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; |
| |
| if (likely(pktwords >= 4)) { |
| unsigned int timeout = 500; |
| unsigned int val; |
| smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); |
| do { |
| udelay(1); |
| val = smsc911x_reg_read(pdata, RX_DP_CTRL); |
| } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); |
| |
| if (unlikely(timeout == 0)) |
| SMSC_WARN(pdata, hw, "Timed out waiting for " |
| "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); |
| } else { |
| unsigned int temp; |
| while (pktwords--) |
| temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); |
| } |
| } |
| |
| /* NAPI poll function */ |
| static int smsc911x_poll(struct napi_struct *napi, int budget) |
| { |
| struct smsc911x_data *pdata = |
| container_of(napi, struct smsc911x_data, napi); |
| struct net_device *dev = pdata->dev; |
| int npackets = 0; |
| |
| while (npackets < budget) { |
| unsigned int pktlength; |
| unsigned int pktwords; |
| struct sk_buff *skb; |
| unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); |
| |
| if (!rxstat) { |
| unsigned int temp; |
| /* We processed all packets available. Tell NAPI it can |
| * stop polling then re-enable rx interrupts */ |
| smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); |
| napi_complete(napi); |
| temp = smsc911x_reg_read(pdata, INT_EN); |
| temp |= INT_EN_RSFL_EN_; |
| smsc911x_reg_write(pdata, INT_EN, temp); |
| break; |
| } |
| |
| /* Count packet for NAPI scheduling, even if it has an error. |
| * Error packets still require cycles to discard */ |
| npackets++; |
| |
| pktlength = ((rxstat & 0x3FFF0000) >> 16); |
| pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; |
| smsc911x_rx_counterrors(dev, rxstat); |
| |
| if (unlikely(rxstat & RX_STS_ES_)) { |
| SMSC_WARN(pdata, rx_err, |
| "Discarding packet with error bit set"); |
| /* Packet has an error, discard it and continue with |
| * the next */ |
| smsc911x_rx_fastforward(pdata, pktwords); |
| dev->stats.rx_dropped++; |
| continue; |
| } |
| |
| skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); |
| if (unlikely(!skb)) { |
| SMSC_WARN(pdata, rx_err, |
| "Unable to allocate skb for rx packet"); |
| /* Drop the packet and stop this polling iteration */ |
| smsc911x_rx_fastforward(pdata, pktwords); |
| dev->stats.rx_dropped++; |
| break; |
| } |
| |
| skb->data = skb->head; |
| skb_reset_tail_pointer(skb); |
| |
| /* Align IP on 16B boundary */ |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, pktlength - 4); |
| pdata->ops->rx_readfifo(pdata, |
| (unsigned int *)skb->head, pktwords); |
| skb->protocol = eth_type_trans(skb, dev); |
| skb_checksum_none_assert(skb); |
| netif_receive_skb(skb); |
| |
| /* Update counters */ |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += (pktlength - 4); |
| } |
| |
| /* Return total received packets */ |
| return npackets; |
| } |
| |
| /* Returns hash bit number for given MAC address |
| * Example: |
| * 01 00 5E 00 00 01 -> returns bit number 31 */ |
| static unsigned int smsc911x_hash(char addr[ETH_ALEN]) |
| { |
| return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; |
| } |
| |
| static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) |
| { |
| /* Performs the multicast & mac_cr update. This is called when |
| * safe on the current hardware, and with the mac_lock held */ |
| unsigned int mac_cr; |
| |
| SMSC_ASSERT_MAC_LOCK(pdata); |
| |
| mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| mac_cr |= pdata->set_bits_mask; |
| mac_cr &= ~(pdata->clear_bits_mask); |
| smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| smsc911x_mac_write(pdata, HASHH, pdata->hashhi); |
| smsc911x_mac_write(pdata, HASHL, pdata->hashlo); |
| SMSC_TRACE(pdata, hw, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", |
| mac_cr, pdata->hashhi, pdata->hashlo); |
| } |
| |
| static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) |
| { |
| unsigned int mac_cr; |
| |
| /* This function is only called for older LAN911x devices |
| * (revA or revB), where MAC_CR, HASHH and HASHL should not |
| * be modified during Rx - newer devices immediately update the |
| * registers. |
| * |
| * This is called from interrupt context */ |
| |
| spin_lock(&pdata->mac_lock); |
| |
| /* Check Rx has stopped */ |
| if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) |
| SMSC_WARN(pdata, drv, "Rx not stopped"); |
| |
| /* Perform the update - safe to do now Rx has stopped */ |
| smsc911x_rx_multicast_update(pdata); |
| |
| /* Re-enable Rx */ |
| mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| mac_cr |= MAC_CR_RXEN_; |
| smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| |
| pdata->multicast_update_pending = 0; |
| |
| spin_unlock(&pdata->mac_lock); |
| } |
| |
| static int smsc911x_soft_reset(struct smsc911x_data *pdata) |
| { |
| unsigned int timeout; |
| unsigned int temp; |
| |
| /* Reset the LAN911x */ |
| smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); |
| timeout = 10; |
| do { |
| udelay(10); |
| temp = smsc911x_reg_read(pdata, HW_CFG); |
| } while ((--timeout) && (temp & HW_CFG_SRST_)); |
| |
| if (unlikely(temp & HW_CFG_SRST_)) { |
| SMSC_WARN(pdata, drv, "Failed to complete reset"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| /* Sets the device MAC address to dev_addr, called with mac_lock held */ |
| static void |
| smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) |
| { |
| u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; |
| u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | |
| (dev_addr[1] << 8) | dev_addr[0]; |
| |
| SMSC_ASSERT_MAC_LOCK(pdata); |
| |
| smsc911x_mac_write(pdata, ADDRH, mac_high16); |
| smsc911x_mac_write(pdata, ADDRL, mac_low32); |
| } |
| |
| static int smsc911x_open(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned int timeout; |
| unsigned int temp; |
| unsigned int intcfg; |
| |
| /* if the phy is not yet registered, retry later*/ |
| if (!pdata->phy_dev) { |
| SMSC_WARN(pdata, hw, "phy_dev is NULL"); |
| return -EAGAIN; |
| } |
| |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| SMSC_WARN(pdata, hw, "dev_addr is not a valid MAC address"); |
| return -EADDRNOTAVAIL; |
| } |
| |
| /* Reset the LAN911x */ |
| if (smsc911x_soft_reset(pdata)) { |
| SMSC_WARN(pdata, hw, "soft reset failed"); |
| return -EIO; |
| } |
| |
| smsc911x_reg_write(pdata, HW_CFG, 0x00050000); |
| smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); |
| |
| /* Increase the legal frame size of VLAN tagged frames to 1522 bytes */ |
| spin_lock_irq(&pdata->mac_lock); |
| smsc911x_mac_write(pdata, VLAN1, ETH_P_8021Q); |
| spin_unlock_irq(&pdata->mac_lock); |
| |
| /* Make sure EEPROM has finished loading before setting GPIO_CFG */ |
| timeout = 50; |
| while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && |
| --timeout) { |
| udelay(10); |
| } |
| |
| if (unlikely(timeout == 0)) |
| SMSC_WARN(pdata, ifup, |
| "Timed out waiting for EEPROM busy bit to clear"); |
| |
| smsc911x_reg_write(pdata, SMSC_GPIO_CFG, 0x70070000); |
| |
| /* The soft reset above cleared the device's MAC address, |
| * restore it from local copy (set in probe) */ |
| spin_lock_irq(&pdata->mac_lock); |
| smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
| spin_unlock_irq(&pdata->mac_lock); |
| |
| /* Initialise irqs, but leave all sources disabled */ |
| smsc911x_reg_write(pdata, INT_EN, 0); |
| smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); |
| |
| /* Set interrupt deassertion to 100uS */ |
| intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); |
| |
| if (pdata->config.irq_polarity) { |
| SMSC_TRACE(pdata, ifup, "irq polarity: active high"); |
| intcfg |= INT_CFG_IRQ_POL_; |
| } else { |
| SMSC_TRACE(pdata, ifup, "irq polarity: active low"); |
| } |
| |
| if (pdata->config.irq_type) { |
| SMSC_TRACE(pdata, ifup, "irq type: push-pull"); |
| intcfg |= INT_CFG_IRQ_TYPE_; |
| } else { |
| SMSC_TRACE(pdata, ifup, "irq type: open drain"); |
| } |
| |
| smsc911x_reg_write(pdata, INT_CFG, intcfg); |
| |
| SMSC_TRACE(pdata, ifup, "Testing irq handler using IRQ %d", dev->irq); |
| pdata->software_irq_signal = 0; |
| smp_wmb(); |
| |
| temp = smsc911x_reg_read(pdata, INT_EN); |
| temp |= INT_EN_SW_INT_EN_; |
| smsc911x_reg_write(pdata, INT_EN, temp); |
| |
| timeout = 1000; |
| while (timeout--) { |
| if (pdata->software_irq_signal) |
| break; |
| msleep(1); |
| } |
| |
| if (!pdata->software_irq_signal) { |
| netdev_warn(dev, "ISR failed signaling test (IRQ %d)\n", |
| dev->irq); |
| return -ENODEV; |
| } |
| SMSC_TRACE(pdata, ifup, "IRQ handler passed test using IRQ %d", |
| dev->irq); |
| |
| netdev_info(dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", |
| (unsigned long)pdata->ioaddr, dev->irq); |
| |
| /* Reset the last known duplex and carrier */ |
| pdata->last_duplex = -1; |
| pdata->last_carrier = -1; |
| |
| /* Bring the PHY up */ |
| phy_start(pdata->phy_dev); |
| |
| temp = smsc911x_reg_read(pdata, HW_CFG); |
| /* Preserve TX FIFO size and external PHY configuration */ |
| temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); |
| temp |= HW_CFG_SF_; |
| smsc911x_reg_write(pdata, HW_CFG, temp); |
| |
| temp = smsc911x_reg_read(pdata, FIFO_INT); |
| temp |= FIFO_INT_TX_AVAIL_LEVEL_; |
| temp &= ~(FIFO_INT_RX_STS_LEVEL_); |
| smsc911x_reg_write(pdata, FIFO_INT, temp); |
| |
| /* set RX Data offset to 2 bytes for alignment */ |
| smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); |
| |
| /* enable NAPI polling before enabling RX interrupts */ |
| napi_enable(&pdata->napi); |
| |
| temp = smsc911x_reg_read(pdata, INT_EN); |
| temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); |
| smsc911x_reg_write(pdata, INT_EN, temp); |
| |
| spin_lock_irq(&pdata->mac_lock); |
| temp = smsc911x_mac_read(pdata, MAC_CR); |
| temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); |
| smsc911x_mac_write(pdata, MAC_CR, temp); |
| spin_unlock_irq(&pdata->mac_lock); |
| |
| smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); |
| |
| netif_start_queue(dev); |
| return 0; |
| } |
| |
| /* Entry point for stopping the interface */ |
| static int smsc911x_stop(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned int temp; |
| |
| /* Disable all device interrupts */ |
| temp = smsc911x_reg_read(pdata, INT_CFG); |
| temp &= ~INT_CFG_IRQ_EN_; |
| smsc911x_reg_write(pdata, INT_CFG, temp); |
| |
| /* Stop Tx and Rx polling */ |
| netif_stop_queue(dev); |
| napi_disable(&pdata->napi); |
| |
| /* At this point all Rx and Tx activity is stopped */ |
| dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); |
| smsc911x_tx_update_txcounters(dev); |
| |
| /* Bring the PHY down */ |
| if (pdata->phy_dev) |
| phy_stop(pdata->phy_dev); |
| |
| SMSC_TRACE(pdata, ifdown, "Interface stopped"); |
| return 0; |
| } |
| |
| /* Entry point for transmitting a packet */ |
| static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned int freespace; |
| unsigned int tx_cmd_a; |
| unsigned int tx_cmd_b; |
| unsigned int temp; |
| u32 wrsz; |
| ulong bufp; |
| |
| freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; |
| |
| if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) |
| SMSC_WARN(pdata, tx_err, |
| "Tx data fifo low, space available: %d", freespace); |
| |
| /* Word alignment adjustment */ |
| tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; |
| tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; |
| tx_cmd_a |= (unsigned int)skb->len; |
| |
| tx_cmd_b = ((unsigned int)skb->len) << 16; |
| tx_cmd_b |= (unsigned int)skb->len; |
| |
| smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); |
| smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); |
| |
| bufp = (ulong)skb->data & (~0x3); |
| wrsz = (u32)skb->len + 3; |
| wrsz += (u32)((ulong)skb->data & 0x3); |
| wrsz >>= 2; |
| |
| pdata->ops->tx_writefifo(pdata, (unsigned int *)bufp, wrsz); |
| freespace -= (skb->len + 32); |
| dev_kfree_skb(skb); |
| |
| if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) |
| smsc911x_tx_update_txcounters(dev); |
| |
| if (freespace < TX_FIFO_LOW_THRESHOLD) { |
| netif_stop_queue(dev); |
| temp = smsc911x_reg_read(pdata, FIFO_INT); |
| temp &= 0x00FFFFFF; |
| temp |= 0x32000000; |
| smsc911x_reg_write(pdata, FIFO_INT, temp); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Entry point for getting status counters */ |
| static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| smsc911x_tx_update_txcounters(dev); |
| dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); |
| return &dev->stats; |
| } |
| |
| /* Entry point for setting addressing modes */ |
| static void smsc911x_set_multicast_list(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned long flags; |
| |
| if (dev->flags & IFF_PROMISC) { |
| /* Enabling promiscuous mode */ |
| pdata->set_bits_mask = MAC_CR_PRMS_; |
| pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| pdata->hashhi = 0; |
| pdata->hashlo = 0; |
| } else if (dev->flags & IFF_ALLMULTI) { |
| /* Enabling all multicast mode */ |
| pdata->set_bits_mask = MAC_CR_MCPAS_; |
| pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); |
| pdata->hashhi = 0; |
| pdata->hashlo = 0; |
| } else if (!netdev_mc_empty(dev)) { |
| /* Enabling specific multicast addresses */ |
| unsigned int hash_high = 0; |
| unsigned int hash_low = 0; |
| struct netdev_hw_addr *ha; |
| |
| pdata->set_bits_mask = MAC_CR_HPFILT_; |
| pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| unsigned int bitnum = smsc911x_hash(ha->addr); |
| unsigned int mask = 0x01 << (bitnum & 0x1F); |
| |
| if (bitnum & 0x20) |
| hash_high |= mask; |
| else |
| hash_low |= mask; |
| } |
| |
| pdata->hashhi = hash_high; |
| pdata->hashlo = hash_low; |
| } else { |
| /* Enabling local MAC address only */ |
| pdata->set_bits_mask = 0; |
| pdata->clear_bits_mask = |
| (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| pdata->hashhi = 0; |
| pdata->hashlo = 0; |
| } |
| |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| |
| if (pdata->generation <= 1) { |
| /* Older hardware revision - cannot change these flags while |
| * receiving data */ |
| if (!pdata->multicast_update_pending) { |
| unsigned int temp; |
| SMSC_TRACE(pdata, hw, "scheduling mcast update"); |
| pdata->multicast_update_pending = 1; |
| |
| /* Request the hardware to stop, then perform the |
| * update when we get an RX_STOP interrupt */ |
| temp = smsc911x_mac_read(pdata, MAC_CR); |
| temp &= ~(MAC_CR_RXEN_); |
| smsc911x_mac_write(pdata, MAC_CR, temp); |
| } else { |
| /* There is another update pending, this should now |
| * use the newer values */ |
| } |
| } else { |
| /* Newer hardware revision - can write immediately */ |
| smsc911x_rx_multicast_update(pdata); |
| } |
| |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| } |
| |
| static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| u32 intsts = smsc911x_reg_read(pdata, INT_STS); |
| u32 inten = smsc911x_reg_read(pdata, INT_EN); |
| int serviced = IRQ_NONE; |
| u32 temp; |
| |
| if (unlikely(intsts & inten & INT_STS_SW_INT_)) { |
| temp = smsc911x_reg_read(pdata, INT_EN); |
| temp &= (~INT_EN_SW_INT_EN_); |
| smsc911x_reg_write(pdata, INT_EN, temp); |
| smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); |
| pdata->software_irq_signal = 1; |
| smp_wmb(); |
| serviced = IRQ_HANDLED; |
| } |
| |
| if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { |
| /* Called when there is a multicast update scheduled and |
| * it is now safe to complete the update */ |
| SMSC_TRACE(pdata, intr, "RX Stop interrupt"); |
| smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); |
| if (pdata->multicast_update_pending) |
| smsc911x_rx_multicast_update_workaround(pdata); |
| serviced = IRQ_HANDLED; |
| } |
| |
| if (intsts & inten & INT_STS_TDFA_) { |
| temp = smsc911x_reg_read(pdata, FIFO_INT); |
| temp |= FIFO_INT_TX_AVAIL_LEVEL_; |
| smsc911x_reg_write(pdata, FIFO_INT, temp); |
| smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); |
| netif_wake_queue(dev); |
| serviced = IRQ_HANDLED; |
| } |
| |
| if (unlikely(intsts & inten & INT_STS_RXE_)) { |
| SMSC_TRACE(pdata, intr, "RX Error interrupt"); |
| smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); |
| serviced = IRQ_HANDLED; |
| } |
| |
| if (likely(intsts & inten & INT_STS_RSFL_)) { |
| if (likely(napi_schedule_prep(&pdata->napi))) { |
| /* Disable Rx interrupts */ |
| temp = smsc911x_reg_read(pdata, INT_EN); |
| temp &= (~INT_EN_RSFL_EN_); |
| smsc911x_reg_write(pdata, INT_EN, temp); |
| /* Schedule a NAPI poll */ |
| __napi_schedule(&pdata->napi); |
| } else { |
| SMSC_WARN(pdata, rx_err, "napi_schedule_prep failed"); |
| } |
| serviced = IRQ_HANDLED; |
| } |
| |
| return serviced; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void smsc911x_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| smsc911x_irqhandler(0, dev); |
| enable_irq(dev->irq); |
| } |
| #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| |
| static int smsc911x_set_mac_address(struct net_device *dev, void *p) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| struct sockaddr *addr = p; |
| |
| /* On older hardware revisions we cannot change the mac address |
| * registers while receiving data. Newer devices can safely change |
| * this at any time. */ |
| if (pdata->generation <= 1 && netif_running(dev)) |
| return -EBUSY; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| |
| spin_lock_irq(&pdata->mac_lock); |
| smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
| spin_unlock_irq(&pdata->mac_lock); |
| |
| netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); |
| |
| return 0; |
| } |
| |
| /* Standard ioctls for mii-tool */ |
| static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| |
| if (!netif_running(dev) || !pdata->phy_dev) |
| return -EINVAL; |
| |
| return phy_mii_ioctl(pdata->phy_dev, ifr, cmd); |
| } |
| |
| static int |
| smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| |
| cmd->maxtxpkt = 1; |
| cmd->maxrxpkt = 1; |
| return phy_ethtool_gset(pdata->phy_dev, cmd); |
| } |
| |
| static int |
| smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| |
| return phy_ethtool_sset(pdata->phy_dev, cmd); |
| } |
| |
| static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); |
| strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); |
| strlcpy(info->bus_info, dev_name(dev->dev.parent), |
| sizeof(info->bus_info)); |
| } |
| |
| static int smsc911x_ethtool_nwayreset(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| |
| return phy_start_aneg(pdata->phy_dev); |
| } |
| |
| static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| return pdata->msg_enable; |
| } |
| |
| static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| pdata->msg_enable = level; |
| } |
| |
| static int smsc911x_ethtool_getregslen(struct net_device *dev) |
| { |
| return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * |
| sizeof(u32); |
| } |
| |
| static void |
| smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, |
| void *buf) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| struct phy_device *phy_dev = pdata->phy_dev; |
| unsigned long flags; |
| unsigned int i; |
| unsigned int j = 0; |
| u32 *data = buf; |
| |
| regs->version = pdata->idrev; |
| for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) |
| data[j++] = smsc911x_reg_read(pdata, i); |
| |
| for (i = MAC_CR; i <= WUCSR; i++) { |
| spin_lock_irqsave(&pdata->mac_lock, flags); |
| data[j++] = smsc911x_mac_read(pdata, i); |
| spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| } |
| |
| for (i = 0; i <= 31; i++) |
| data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); |
| } |
| |
| static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) |
| { |
| unsigned int temp = smsc911x_reg_read(pdata, SMSC_GPIO_CFG); |
| temp &= ~GPIO_CFG_EEPR_EN_; |
| smsc911x_reg_write(pdata, SMSC_GPIO_CFG, temp); |
| msleep(1); |
| } |
| |
| static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) |
| { |
| int timeout = 100; |
| u32 e2cmd; |
| |
| SMSC_TRACE(pdata, drv, "op 0x%08x", op); |
| if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { |
| SMSC_WARN(pdata, drv, "Busy at start"); |
| return -EBUSY; |
| } |
| |
| e2cmd = op | E2P_CMD_EPC_BUSY_; |
| smsc911x_reg_write(pdata, E2P_CMD, e2cmd); |
| |
| do { |
| msleep(1); |
| e2cmd = smsc911x_reg_read(pdata, E2P_CMD); |
| } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); |
| |
| if (!timeout) { |
| SMSC_TRACE(pdata, drv, "TIMED OUT"); |
| return -EAGAIN; |
| } |
| |
| if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { |
| SMSC_TRACE(pdata, drv, "Error occurred during eeprom operation"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, |
| u8 address, u8 *data) |
| { |
| u32 op = E2P_CMD_EPC_CMD_READ_ | address; |
| int ret; |
| |
| SMSC_TRACE(pdata, drv, "address 0x%x", address); |
| ret = smsc911x_eeprom_send_cmd(pdata, op); |
| |
| if (!ret) |
| data[address] = smsc911x_reg_read(pdata, E2P_DATA); |
| |
| return ret; |
| } |
| |
| static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, |
| u8 address, u8 data) |
| { |
| u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; |
| u32 temp; |
| int ret; |
| |
| SMSC_TRACE(pdata, drv, "address 0x%x, data 0x%x", address, data); |
| ret = smsc911x_eeprom_send_cmd(pdata, op); |
| |
| if (!ret) { |
| op = E2P_CMD_EPC_CMD_WRITE_ | address; |
| smsc911x_reg_write(pdata, E2P_DATA, (u32)data); |
| |
| /* Workaround for hardware read-after-write restriction */ |
| temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| |
| ret = smsc911x_eeprom_send_cmd(pdata, op); |
| } |
| |
| return ret; |
| } |
| |
| static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) |
| { |
| return SMSC911X_EEPROM_SIZE; |
| } |
| |
| static int smsc911x_ethtool_get_eeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| u8 eeprom_data[SMSC911X_EEPROM_SIZE]; |
| int len; |
| int i; |
| |
| smsc911x_eeprom_enable_access(pdata); |
| |
| len = min(eeprom->len, SMSC911X_EEPROM_SIZE); |
| for (i = 0; i < len; i++) { |
| int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); |
| if (ret < 0) { |
| eeprom->len = 0; |
| return ret; |
| } |
| } |
| |
| memcpy(data, &eeprom_data[eeprom->offset], len); |
| eeprom->len = len; |
| return 0; |
| } |
| |
| static int smsc911x_ethtool_set_eeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| int ret; |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| |
| smsc911x_eeprom_enable_access(pdata); |
| smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); |
| ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); |
| smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); |
| |
| /* Single byte write, according to man page */ |
| eeprom->len = 1; |
| |
| return ret; |
| } |
| |
| static const struct ethtool_ops smsc911x_ethtool_ops = { |
| .get_settings = smsc911x_ethtool_getsettings, |
| .set_settings = smsc911x_ethtool_setsettings, |
| .get_link = ethtool_op_get_link, |
| .get_drvinfo = smsc911x_ethtool_getdrvinfo, |
| .nway_reset = smsc911x_ethtool_nwayreset, |
| .get_msglevel = smsc911x_ethtool_getmsglevel, |
| .set_msglevel = smsc911x_ethtool_setmsglevel, |
| .get_regs_len = smsc911x_ethtool_getregslen, |
| .get_regs = smsc911x_ethtool_getregs, |
| .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, |
| .get_eeprom = smsc911x_ethtool_get_eeprom, |
| .set_eeprom = smsc911x_ethtool_set_eeprom, |
| }; |
| |
| static const struct net_device_ops smsc911x_netdev_ops = { |
| .ndo_open = smsc911x_open, |
| .ndo_stop = smsc911x_stop, |
| .ndo_start_xmit = smsc911x_hard_start_xmit, |
| .ndo_get_stats = smsc911x_get_stats, |
| .ndo_set_multicast_list = smsc911x_set_multicast_list, |
| .ndo_do_ioctl = smsc911x_do_ioctl, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = smsc911x_set_mac_address, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = smsc911x_poll_controller, |
| #endif |
| }; |
| |
| /* copies the current mac address from hardware to dev->dev_addr */ |
| static void __devinit smsc911x_read_mac_address(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); |
| u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); |
| |
| dev->dev_addr[0] = (u8)(mac_low32); |
| dev->dev_addr[1] = (u8)(mac_low32 >> 8); |
| dev->dev_addr[2] = (u8)(mac_low32 >> 16); |
| dev->dev_addr[3] = (u8)(mac_low32 >> 24); |
| dev->dev_addr[4] = (u8)(mac_high16); |
| dev->dev_addr[5] = (u8)(mac_high16 >> 8); |
| } |
| |
| /* Initializing private device structures, only called from probe */ |
| static int __devinit smsc911x_init(struct net_device *dev) |
| { |
| struct smsc911x_data *pdata = netdev_priv(dev); |
| unsigned int byte_test; |
| |
| SMSC_TRACE(pdata, probe, "Driver Parameters:"); |
| SMSC_TRACE(pdata, probe, "LAN base: 0x%08lX", |
| (unsigned long)pdata->ioaddr); |
| SMSC_TRACE(pdata, probe, "IRQ: %d", dev->irq); |
| SMSC_TRACE(pdata, probe, "PHY will be autodetected."); |
| |
| spin_lock_init(&pdata->dev_lock); |
| spin_lock_init(&pdata->mac_lock); |
| |
| if (pdata->ioaddr == 0) { |
| SMSC_WARN(pdata, probe, "pdata->ioaddr: 0x00000000"); |
| return -ENODEV; |
| } |
| |
| /* Check byte ordering */ |
| byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| SMSC_TRACE(pdata, probe, "BYTE_TEST: 0x%08X", byte_test); |
| if (byte_test == 0x43218765) { |
| SMSC_TRACE(pdata, probe, "BYTE_TEST looks swapped, " |
| "applying WORD_SWAP"); |
| smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); |
| |
| /* 1 dummy read of BYTE_TEST is needed after a write to |
| * WORD_SWAP before its contents are valid */ |
| byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| |
| byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| } |
| |
| if (byte_test != 0x87654321) { |
| SMSC_WARN(pdata, drv, "BYTE_TEST: 0x%08X", byte_test); |
| if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { |
| SMSC_WARN(pdata, probe, |
| "top 16 bits equal to bottom 16 bits"); |
| SMSC_TRACE(pdata, probe, |
| "This may mean the chip is set " |
| "for 32 bit while the bus is reading 16 bit"); |
| } |
| return -ENODEV; |
| } |
| |
| /* Default generation to zero (all workarounds apply) */ |
| pdata->generation = 0; |
| |
| pdata->idrev = smsc911x_reg_read(pdata, ID_REV); |
| switch (pdata->idrev & 0xFFFF0000) { |
| case 0x01180000: |
| case 0x01170000: |
| case 0x01160000: |
| case 0x01150000: |
| /* LAN911[5678] family */ |
| pdata->generation = pdata->idrev & 0x0000FFFF; |
| break; |
| |
| case 0x118A0000: |
| case 0x117A0000: |
| case 0x116A0000: |
| case 0x115A0000: |
| /* LAN921[5678] family */ |
| pdata->generation = 3; |
| break; |
| |
| case 0x92100000: |
| case 0x92110000: |
| case 0x92200000: |
| case 0x92210000: |
| /* LAN9210/LAN9211/LAN9220/LAN9221 */ |
| pdata->generation = 4; |
| break; |
| |
| default: |
| SMSC_WARN(pdata, probe, "LAN911x not identified, idrev: 0x%08X", |
| pdata->idrev); |
| return -ENODEV; |
| } |
| |
| SMSC_TRACE(pdata, probe, |
| "LAN911x identified, idrev: 0x%08X, generation: %d", |
| pdata->idrev, pdata->generation); |
| |
| if (pdata->generation == 0) |
| SMSC_WARN(pdata, probe, |
| "This driver is not intended for this chip revision"); |
| |
| /* workaround for platforms without an eeprom, where the mac address |
| * is stored elsewhere and set by the bootloader. This saves the |
| * mac address before resetting the device */ |
| if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) { |
| spin_lock_irq(&pdata->mac_lock); |
| smsc911x_read_mac_address(dev); |
| spin_unlock_irq(&pdata->mac_lock); |
| } |
| |
| /* Reset the LAN911x */ |
| if (smsc911x_soft_reset(pdata)) |
| return -ENODEV; |
| |
| /* Disable all interrupt sources until we bring the device up */ |
| smsc911x_reg_write(pdata, INT_EN, 0); |
| |
| ether_setup(dev); |
| dev->flags |= IFF_MULTICAST; |
| netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); |
| dev->netdev_ops = &smsc911x_netdev_ops; |
| dev->ethtool_ops = &smsc911x_ethtool_ops; |
| |
| return 0; |
| } |
| |
| static int __devexit smsc911x_drv_remove(struct platform_device *pdev) |
| { |
| struct net_device *dev; |
| struct smsc911x_data *pdata; |
| struct resource *res; |
| |
| dev = platform_get_drvdata(pdev); |
| BUG_ON(!dev); |
| pdata = netdev_priv(dev); |
| BUG_ON(!pdata); |
| BUG_ON(!pdata->ioaddr); |
| BUG_ON(!pdata->phy_dev); |
| |
| SMSC_TRACE(pdata, ifdown, "Stopping driver"); |
| |
| if (pdata->config.has_reset_gpio) { |
| gpio_set_value_cansleep(pdata->config.reset_gpio, 0); |
| gpio_free(pdata->config.reset_gpio); |
| } |
| phy_disconnect(pdata->phy_dev); |
| pdata->phy_dev = NULL; |
| mdiobus_unregister(pdata->mii_bus); |
| mdiobus_free(pdata->mii_bus); |
| |
| platform_set_drvdata(pdev, NULL); |
| unregister_netdev(dev); |
| free_irq(dev->irq, dev); |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "smsc911x-memory"); |
| if (!res) |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| release_mem_region(res->start, resource_size(res)); |
| |
| iounmap(pdata->ioaddr); |
| |
| free_netdev(dev); |
| |
| return 0; |
| } |
| |
| /* standard register acces */ |
| static const struct smsc911x_ops standard_smsc911x_ops = { |
| .reg_read = __smsc911x_reg_read, |
| .reg_write = __smsc911x_reg_write, |
| .rx_readfifo = smsc911x_rx_readfifo, |
| .tx_writefifo = smsc911x_tx_writefifo, |
| }; |
| |
| /* shifted register access */ |
| static const struct smsc911x_ops shifted_smsc911x_ops = { |
| .reg_read = __smsc911x_reg_read_shift, |
| .reg_write = __smsc911x_reg_write_shift, |
| .rx_readfifo = smsc911x_rx_readfifo_shift, |
| .tx_writefifo = smsc911x_tx_writefifo_shift, |
| }; |
| |
| static int __devinit smsc911x_drv_probe(struct platform_device *pdev) |
| { |
| struct net_device *dev; |
| struct smsc911x_data *pdata; |
| struct smsc911x_platform_config *config = pdev->dev.platform_data; |
| struct resource *res, *irq_res; |
| unsigned int intcfg = 0; |
| int res_size, irq_flags; |
| int retval; |
| |
| pr_info("Driver version %s\n", SMSC_DRV_VERSION); |
| |
| /* platform data specifies irq & dynamic bus configuration */ |
| if (!pdev->dev.platform_data) { |
| pr_warn("platform_data not provided\n"); |
| retval = -ENODEV; |
| goto out_0; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "smsc911x-memory"); |
| if (!res) |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| pr_warn("Could not allocate resource\n"); |
| retval = -ENODEV; |
| goto out_0; |
| } |
| res_size = resource_size(res); |
| |
| irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!irq_res) { |
| pr_warn("Could not allocate irq resource\n"); |
| retval = -ENODEV; |
| goto out_0; |
| } |
| |
| if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { |
| retval = -EBUSY; |
| goto out_0; |
| } |
| |
| dev = alloc_etherdev(sizeof(struct smsc911x_data)); |
| if (!dev) { |
| pr_warn("Could not allocate device\n"); |
| retval = -ENOMEM; |
| goto out_release_io_1; |
| } |
| |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| pdata = netdev_priv(dev); |
| |
| dev->irq = irq_res->start; |
| irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; |
| pdata->ioaddr = ioremap_nocache(res->start, res_size); |
| |
| /* copy config parameters across to pdata */ |
| memcpy(&pdata->config, config, sizeof(pdata->config)); |
| |
| pdata->dev = dev; |
| pdata->msg_enable = ((1 << debug) - 1); |
| |
| if (pdata->ioaddr == NULL) { |
| SMSC_WARN(pdata, probe, "Error smsc911x base address invalid"); |
| retval = -ENOMEM; |
| goto out_free_netdev_2; |
| } |
| |
| /* assume standard, non-shifted, access to HW registers */ |
| pdata->ops = &standard_smsc911x_ops; |
| /* apply the right access if shifting is needed */ |
| if (config->shift) |
| pdata->ops = &shifted_smsc911x_ops; |
| |
| retval = smsc911x_init(dev); |
| if (retval < 0) |
| goto out_unmap_io_3; |
| |
| /* configure irq polarity and type before connecting isr */ |
| if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) |
| intcfg |= INT_CFG_IRQ_POL_; |
| |
| if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) |
| intcfg |= INT_CFG_IRQ_TYPE_; |
| |
| smsc911x_reg_write(pdata, INT_CFG, intcfg); |
| |
| /* Ensure interrupts are globally disabled before connecting ISR */ |
| smsc911x_reg_write(pdata, INT_EN, 0); |
| smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); |
| |
| retval = request_any_context_irq(dev->irq, smsc911x_irqhandler, |
| irq_flags | IRQF_SHARED, dev->name, dev); |
| if (retval < 0) { |
| SMSC_WARN(pdata, probe, |
| "Unable to claim requested irq: %d", dev->irq); |
| goto out_unmap_io_3; |
| } |
| |
| platform_set_drvdata(pdev, dev); |
| |
| retval = register_netdev(dev); |
| if (retval) { |
| SMSC_WARN(pdata, probe, "Error %i registering device", retval); |
| goto out_unset_drvdata_4; |
| } else { |
| SMSC_TRACE(pdata, probe, |
| "Network interface: \"%s\"", dev->name); |
| } |
| |
| retval = smsc911x_mii_init(pdev, dev); |
| if (retval) { |
| SMSC_WARN(pdata, probe, "Error %i initialising mii", retval); |
| goto out_unregister_netdev_5; |
| } |
| |
| spin_lock_irq(&pdata->mac_lock); |
| |
| /* Check if mac address has been specified when bringing interface up */ |
| if (is_valid_ether_addr(dev->dev_addr)) { |
| smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
| SMSC_TRACE(pdata, probe, |
| "MAC Address is specified by configuration"); |
| } else if (is_valid_ether_addr(pdata->config.mac)) { |
| memcpy(dev->dev_addr, pdata->config.mac, 6); |
| SMSC_TRACE(pdata, probe, |
| "MAC Address specified by platform data"); |
| } else { |
| /* Try reading mac address from device. if EEPROM is present |
| * it will already have been set */ |
| smsc_get_mac(dev); |
| |
| if (is_valid_ether_addr(dev->dev_addr)) { |
| /* eeprom values are valid so use them */ |
| SMSC_TRACE(pdata, probe, |
| "Mac Address is read from LAN911x EEPROM"); |
| } else { |
| /* eeprom values are invalid, generate random MAC */ |
| random_ether_addr(dev->dev_addr); |
| smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
| SMSC_TRACE(pdata, probe, |
| "MAC Address is set to random_ether_addr"); |
| } |
| } |
| |
| spin_unlock_irq(&pdata->mac_lock); |
| |
| netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr); |
| |
| return 0; |
| |
| out_unregister_netdev_5: |
| unregister_netdev(dev); |
| out_unset_drvdata_4: |
| platform_set_drvdata(pdev, NULL); |
| free_irq(dev->irq, dev); |
| out_unmap_io_3: |
| iounmap(pdata->ioaddr); |
| out_free_netdev_2: |
| free_netdev(dev); |
| out_release_io_1: |
| release_mem_region(res->start, resource_size(res)); |
| out_0: |
| return retval; |
| } |
| |
| #ifdef CONFIG_PM |
| /* This implementation assumes the devices remains powered on its VDDVARIO |
| * pins during suspend. */ |
| |
| /* TODO: implement freeze/thaw callbacks for hibernation.*/ |
| |
| static int smsc911x_suspend(struct device *dev) |
| { |
| struct net_device *ndev = dev_get_drvdata(dev); |
| struct smsc911x_data *pdata = netdev_priv(ndev); |
| |
| /* enable wake on LAN, energy detection and the external PME |
| * signal. */ |
| smsc911x_reg_write(pdata, PMT_CTRL, |
| PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | |
| PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); |
| |
| /* Drive the GPIO Ethernet_Reset Line low to Suspend */ |
| if (pdata->config.has_reset_gpio) |
| gpio_set_value_cansleep(pdata->config.reset_gpio, 0); |
| |
| return 0; |
| } |
| |
| static int smsc911x_resume(struct device *dev) |
| { |
| struct net_device *ndev = dev_get_drvdata(dev); |
| struct smsc911x_data *pdata = netdev_priv(ndev); |
| unsigned int to = 100; |
| |
| if (pdata->config.has_reset_gpio) |
| gpio_set_value_cansleep(pdata->config.reset_gpio, 1); |
| |
| /* Note 3.11 from the datasheet: |
| * "When the LAN9220 is in a power saving state, a write of any |
| * data to the BYTE_TEST register will wake-up the device." |
| */ |
| smsc911x_reg_write(pdata, BYTE_TEST, 0); |
| |
| /* poll the READY bit in PMT_CTRL. Any other access to the device is |
| * forbidden while this bit isn't set. Try for 100ms and return -EIO |
| * if it failed. */ |
| while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) |
| udelay(1000); |
| |
| return (to == 0) ? -EIO : 0; |
| } |
| |
| static const struct dev_pm_ops smsc911x_pm_ops = { |
| .suspend = smsc911x_suspend, |
| .resume = smsc911x_resume, |
| }; |
| |
| #define SMSC911X_PM_OPS (&smsc911x_pm_ops) |
| |
| #else |
| #define SMSC911X_PM_OPS NULL |
| #endif |
| |
| static struct platform_driver smsc911x_driver = { |
| .probe = smsc911x_drv_probe, |
| .remove = __devexit_p(smsc911x_drv_remove), |
| .driver = { |
| .name = SMSC_CHIPNAME, |
| .owner = THIS_MODULE, |
| .pm = SMSC911X_PM_OPS, |
| }, |
| }; |
| |
| /* Entry point for loading the module */ |
| static int __init smsc911x_init_module(void) |
| { |
| SMSC_INITIALIZE(); |
| return platform_driver_register(&smsc911x_driver); |
| } |
| |
| /* entry point for unloading the module */ |
| static void __exit smsc911x_cleanup_module(void) |
| { |
| platform_driver_unregister(&smsc911x_driver); |
| } |
| |
| module_init(smsc911x_init_module); |
| module_exit(smsc911x_cleanup_module); |