| /* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_gpio.h> |
| #include <linux/delay.h> |
| #include <linux/crc32.h> |
| #include "msm_sd.h" |
| #include "msm_cci.h" |
| #include "msm_eeprom.h" |
| |
| #undef CDBG |
| #ifdef MSM_EEPROM_DEBUG |
| #define CDBG(fmt, args...) pr_err(fmt, ##args) |
| #else |
| #define CDBG(fmt, args...) pr_debug(fmt, ##args) |
| #endif |
| |
| DEFINE_MSM_MUTEX(msm_eeprom_mutex); |
| |
| |
| |
| /** |
| * msm_eeprom_verify_sum - verify crc32 checksum |
| * @mem: data buffer |
| * @size: size of data buffer |
| * @sum: expected checksum |
| * |
| * Returns 0 if checksum match, -EINVAL otherwise. |
| */ |
| static int msm_eeprom_verify_sum(const char *mem, uint32_t size, uint32_t sum) |
| { |
| uint32_t crc = ~0UL; |
| |
| /* check overflow */ |
| if (size > crc - sizeof(uint32_t)) |
| return -EINVAL; |
| |
| crc = crc32_le(crc, mem, size); |
| if (~crc != sum) { |
| CDBG("%s: expect 0x%x, result 0x%x\n", __func__, sum, ~crc); |
| return -EINVAL; |
| } |
| CDBG("%s: checksum pass 0x%x\n", __func__, sum); |
| return 0; |
| } |
| |
| /** |
| * msm_eeprom_match_crc - verify multiple regions using crc |
| * @data: data block to be verified |
| * |
| * Iterates through all regions stored in @data. Regions with odd index |
| * are treated as data, and its next region is treated as checksum. Thus |
| * regions of even index must have valid_size of 4 or 0 (skip verification). |
| * Returns a bitmask of verified regions, starting from LSB. 1 indicates |
| * a checksum match, while 0 indicates checksum mismatch or not verified. |
| */ |
| static uint32_t msm_eeprom_match_crc(struct msm_eeprom_memory_block_t *data) |
| { |
| int j, rc; |
| uint32_t *sum; |
| uint32_t ret = 0; |
| uint8_t *memptr; |
| struct msm_eeprom_memory_map_t *map; |
| |
| if (!data) { |
| pr_err("%s data is NULL", __func__); |
| return -EINVAL; |
| } |
| map = data->map; |
| memptr = data->mapdata; |
| |
| for (j = 0; j + 1 < data->num_map; j += 2) { |
| /* empty table or no checksum */ |
| if (!map[j].mem.valid_size || !map[j+1].mem.valid_size) { |
| memptr += map[j].mem.valid_size |
| + map[j+1].mem.valid_size; |
| continue; |
| } |
| if (map[j+1].mem.valid_size != sizeof(uint32_t)) { |
| CDBG("%s: malformatted data mapping\n", __func__); |
| return -EINVAL; |
| } |
| sum = (uint32_t *) (memptr + map[j].mem.valid_size); |
| rc = msm_eeprom_verify_sum(memptr, map[j].mem.valid_size, |
| *sum); |
| if (!rc) |
| ret |= 1 << (j/2); |
| memptr += map[j].mem.valid_size + map[j+1].mem.valid_size; |
| } |
| return ret; |
| } |
| |
| static int msm_eeprom_get_mm_data(struct msm_eeprom_ctrl_t *e_ctrl, |
| struct msm_eeprom_cfg_data *cdata) |
| { |
| int rc = 0; |
| struct msm_eeprom_mm_t *mm_data = &e_ctrl->eboard_info->mm_data; |
| cdata->cfg.get_mm_data.mm_support = mm_data->mm_support; |
| cdata->cfg.get_mm_data.mm_compression = mm_data->mm_compression; |
| cdata->cfg.get_mm_data.mm_size = mm_data->mm_size; |
| return rc; |
| } |
| |
| static int eeprom_config_read_cal_data(struct msm_eeprom_ctrl_t *e_ctrl, |
| struct msm_eeprom_cfg_data *cdata) |
| { |
| int rc; |
| |
| /* check range */ |
| if (cdata->cfg.read_data.num_bytes > |
| e_ctrl->cal_data.num_data) { |
| CDBG("%s: Invalid size. exp %u, req %u\n", __func__, |
| e_ctrl->cal_data.num_data, |
| cdata->cfg.read_data.num_bytes); |
| return -EINVAL; |
| } |
| if (!e_ctrl->cal_data.mapdata) |
| return -EFAULT; |
| |
| rc = copy_to_user(cdata->cfg.read_data.dbuffer, |
| e_ctrl->cal_data.mapdata, |
| cdata->cfg.read_data.num_bytes); |
| |
| return rc; |
| } |
| |
| static int msm_eeprom_config(struct msm_eeprom_ctrl_t *e_ctrl, |
| void __user *argp) |
| { |
| struct msm_eeprom_cfg_data *cdata = |
| (struct msm_eeprom_cfg_data *)argp; |
| int rc = 0; |
| |
| CDBG("%s E\n", __func__); |
| switch (cdata->cfgtype) { |
| case CFG_EEPROM_GET_INFO: |
| CDBG("%s E CFG_EEPROM_GET_INFO\n", __func__); |
| cdata->is_supported = e_ctrl->is_supported; |
| memcpy(cdata->cfg.eeprom_name, |
| e_ctrl->eboard_info->eeprom_name, |
| sizeof(cdata->cfg.eeprom_name)); |
| break; |
| case CFG_EEPROM_GET_CAL_DATA: |
| CDBG("%s E CFG_EEPROM_GET_CAL_DATA\n", __func__); |
| cdata->cfg.get_data.num_bytes = |
| e_ctrl->cal_data.num_data; |
| break; |
| case CFG_EEPROM_READ_CAL_DATA: |
| CDBG("%s E CFG_EEPROM_READ_CAL_DATA\n", __func__); |
| rc = eeprom_config_read_cal_data(e_ctrl, cdata); |
| break; |
| case CFG_EEPROM_GET_MM_INFO: |
| CDBG("%s E CFG_EEPROM_GET_MM_INFO\n", __func__); |
| rc = msm_eeprom_get_mm_data(e_ctrl, cdata); |
| break; |
| default: |
| break; |
| } |
| |
| CDBG("%s X rc: %d\n", __func__, rc); |
| return rc; |
| } |
| |
| static int msm_eeprom_get_subdev_id(struct msm_eeprom_ctrl_t *e_ctrl, |
| void *arg) |
| { |
| uint32_t *subdev_id = (uint32_t *)arg; |
| CDBG("%s E\n", __func__); |
| if (!subdev_id) { |
| pr_err("%s failed\n", __func__); |
| return -EINVAL; |
| } |
| *subdev_id = e_ctrl->subdev_id; |
| CDBG("subdev_id %d\n", *subdev_id); |
| CDBG("%s X\n", __func__); |
| return 0; |
| } |
| |
| static long msm_eeprom_subdev_ioctl(struct v4l2_subdev *sd, |
| unsigned int cmd, void *arg) |
| { |
| struct msm_eeprom_ctrl_t *e_ctrl = v4l2_get_subdevdata(sd); |
| void __user *argp = (void __user *)arg; |
| CDBG("%s E\n", __func__); |
| CDBG("%s:%d a_ctrl %p argp %p\n", __func__, __LINE__, e_ctrl, argp); |
| switch (cmd) { |
| case VIDIOC_MSM_SENSOR_GET_SUBDEV_ID: |
| return msm_eeprom_get_subdev_id(e_ctrl, argp); |
| case VIDIOC_MSM_EEPROM_CFG: |
| return msm_eeprom_config(e_ctrl, argp); |
| default: |
| return -ENOIOCTLCMD; |
| } |
| |
| CDBG("%s X\n", __func__); |
| } |
| |
| static struct msm_camera_i2c_fn_t msm_eeprom_cci_func_tbl = { |
| .i2c_read = msm_camera_cci_i2c_read, |
| .i2c_read_seq = msm_camera_cci_i2c_read_seq, |
| .i2c_write = msm_camera_cci_i2c_write, |
| .i2c_write_seq = msm_camera_cci_i2c_write_seq, |
| .i2c_write_table = msm_camera_cci_i2c_write_table, |
| .i2c_write_seq_table = msm_camera_cci_i2c_write_seq_table, |
| .i2c_write_table_w_microdelay = |
| msm_camera_cci_i2c_write_table_w_microdelay, |
| .i2c_util = msm_sensor_cci_i2c_util, |
| .i2c_poll = msm_camera_cci_i2c_poll, |
| }; |
| |
| static struct msm_camera_i2c_fn_t msm_eeprom_qup_func_tbl = { |
| .i2c_read = msm_camera_qup_i2c_read, |
| .i2c_read_seq = msm_camera_qup_i2c_read_seq, |
| .i2c_write = msm_camera_qup_i2c_write, |
| .i2c_write_table = msm_camera_qup_i2c_write_table, |
| .i2c_write_seq_table = msm_camera_qup_i2c_write_seq_table, |
| .i2c_write_table_w_microdelay = |
| msm_camera_qup_i2c_write_table_w_microdelay, |
| }; |
| |
| static struct msm_camera_i2c_fn_t msm_eeprom_spi_func_tbl = { |
| .i2c_read = msm_camera_spi_read, |
| .i2c_read_seq = msm_camera_spi_read_seq, |
| }; |
| |
| static int msm_eeprom_open(struct v4l2_subdev *sd, |
| struct v4l2_subdev_fh *fh) { |
| int rc = 0; |
| struct msm_eeprom_ctrl_t *e_ctrl = v4l2_get_subdevdata(sd); |
| CDBG("%s E\n", __func__); |
| if (!e_ctrl) { |
| pr_err("%s failed e_ctrl is NULL\n", __func__); |
| return -EINVAL; |
| } |
| CDBG("%s X\n", __func__); |
| return rc; |
| } |
| |
| static int msm_eeprom_close(struct v4l2_subdev *sd, |
| struct v4l2_subdev_fh *fh) { |
| int rc = 0; |
| struct msm_eeprom_ctrl_t *e_ctrl = v4l2_get_subdevdata(sd); |
| CDBG("%s E\n", __func__); |
| if (!e_ctrl) { |
| pr_err("%s failed e_ctrl is NULL\n", __func__); |
| return -EINVAL; |
| } |
| CDBG("%s X\n", __func__); |
| return rc; |
| } |
| |
| static const struct v4l2_subdev_internal_ops msm_eeprom_internal_ops = { |
| .open = msm_eeprom_open, |
| .close = msm_eeprom_close, |
| }; |
| /** |
| * read_eeprom_memory() - read map data into buffer |
| * @e_ctrl: eeprom control struct |
| * @block: block to be read |
| * |
| * This function iterates through blocks stored in block->map, reads each |
| * region and concatenate them into the pre-allocated block->mapdata |
| */ |
| static int read_eeprom_memory(struct msm_eeprom_ctrl_t *e_ctrl, |
| struct msm_eeprom_memory_block_t *block) |
| { |
| int rc = 0; |
| int j; |
| struct msm_eeprom_memory_map_t *emap = block->map; |
| uint8_t *memptr = block->mapdata; |
| struct msm_eeprom_board_info *eb_info = NULL; |
| |
| if (!e_ctrl) { |
| pr_err("%s e_ctrl is NULL", __func__); |
| return -EINVAL; |
| } |
| |
| eb_info = e_ctrl->eboard_info; |
| for (j = 0; j < block->num_map; j++) { |
| if (emap[j].saddr.addr) { |
| eb_info->i2c_slaveaddr = emap[j].saddr.addr; |
| e_ctrl->i2c_client.cci_client->sid = |
| eb_info->i2c_slaveaddr >> 1; |
| pr_err("qcom,slave-addr = 0x%X\n", |
| eb_info->i2c_slaveaddr); |
| } |
| |
| if (emap[j].page.valid_size) { |
| e_ctrl->i2c_client.addr_type = emap[j].page.addr_t; |
| rc = e_ctrl->i2c_client.i2c_func_tbl->i2c_write( |
| &(e_ctrl->i2c_client), emap[j].page.addr, |
| emap[j].page.data, emap[j].page.data_t); |
| msleep(emap[j].page.delay); |
| if (rc < 0) { |
| pr_err("%s: page write failed\n", __func__); |
| return rc; |
| } |
| } |
| if (emap[j].pageen.valid_size) { |
| e_ctrl->i2c_client.addr_type = emap[j].pageen.addr_t; |
| rc = e_ctrl->i2c_client.i2c_func_tbl->i2c_write( |
| &(e_ctrl->i2c_client), emap[j].pageen.addr, |
| emap[j].pageen.data, emap[j].pageen.data_t); |
| msleep(emap[j].pageen.delay); |
| if (rc < 0) { |
| pr_err("%s: page enable failed\n", __func__); |
| return rc; |
| } |
| } |
| if (emap[j].poll.valid_size) { |
| e_ctrl->i2c_client.addr_type = emap[j].poll.addr_t; |
| rc = e_ctrl->i2c_client.i2c_func_tbl->i2c_poll( |
| &(e_ctrl->i2c_client), emap[j].poll.addr, |
| emap[j].poll.data, emap[j].poll.data_t); |
| msleep(emap[j].poll.delay); |
| if (rc < 0) { |
| pr_err("%s: poll failed\n", __func__); |
| return rc; |
| } |
| } |
| |
| if (emap[j].mem.valid_size) { |
| e_ctrl->i2c_client.addr_type = emap[j].mem.addr_t; |
| rc = e_ctrl->i2c_client.i2c_func_tbl->i2c_read_seq( |
| &(e_ctrl->i2c_client), emap[j].mem.addr, |
| memptr, emap[j].mem.valid_size); |
| if (rc < 0) { |
| pr_err("%s: read failed\n", __func__); |
| return rc; |
| } |
| memptr += emap[j].mem.valid_size; |
| } |
| if (emap[j].pageen.valid_size) { |
| e_ctrl->i2c_client.addr_type = emap[j].pageen.addr_t; |
| rc = e_ctrl->i2c_client.i2c_func_tbl->i2c_write( |
| &(e_ctrl->i2c_client), emap[j].pageen.addr, |
| 0, emap[j].pageen.data_t); |
| if (rc < 0) { |
| pr_err("%s: page disable failed\n", __func__); |
| return rc; |
| } |
| } |
| } |
| return rc; |
| } |
| /** |
| * msm_eeprom_parse_memory_map() - parse memory map in device node |
| * @of: device node |
| * @data: memory block for output |
| * |
| * This functions parses @of to fill @data. It allocates map itself, parses |
| * the @of node, calculate total data length, and allocates required buffer. |
| * It only fills the map, but does not perform actual reading. |
| */ |
| static int msm_eeprom_parse_memory_map(struct device_node *of, |
| struct msm_eeprom_memory_block_t *data) |
| { |
| int i, rc = 0; |
| char property[PROPERTY_MAXSIZE]; |
| uint32_t count = 6; |
| struct msm_eeprom_memory_map_t *map; |
| |
| snprintf(property, PROPERTY_MAXSIZE, "qcom,num-blocks"); |
| rc = of_property_read_u32(of, property, &data->num_map); |
| CDBG("%s: %s %d\n", __func__, property, data->num_map); |
| if (rc < 0) { |
| pr_err("%s failed rc %d\n", __func__, rc); |
| return rc; |
| } |
| |
| map = kzalloc((sizeof(*map) * data->num_map), GFP_KERNEL); |
| if (!map) { |
| pr_err("%s failed line %d\n", __func__, __LINE__); |
| return -ENOMEM; |
| } |
| data->map = map; |
| |
| for (i = 0; i < data->num_map; i++) { |
| snprintf(property, PROPERTY_MAXSIZE, "qcom,page%d", i); |
| rc = of_property_read_u32_array(of, property, |
| (uint32_t *) &map[i].page, count); |
| if (rc < 0) { |
| pr_err("%s: failed %d\n", __func__, __LINE__); |
| goto ERROR; |
| } |
| |
| snprintf(property, PROPERTY_MAXSIZE, |
| "qcom,pageen%d", i); |
| rc = of_property_read_u32_array(of, property, |
| (uint32_t *) &map[i].pageen, count); |
| if (rc < 0) |
| pr_err("%s: pageen not needed\n", __func__); |
| |
| snprintf(property, PROPERTY_MAXSIZE, "qcom,poll%d", i); |
| rc = of_property_read_u32_array(of, property, |
| (uint32_t *) &map[i].poll, count); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto ERROR; |
| } |
| |
| snprintf(property, PROPERTY_MAXSIZE, "qcom,saddr%d", i); |
| rc = of_property_read_u32_array(of, property, |
| (uint32_t *) &map[i].saddr.addr, 1); |
| if (rc < 0) |
| CDBG("%s: saddr not needed - block %d\n", __func__, i); |
| |
| snprintf(property, PROPERTY_MAXSIZE, "qcom,mem%d", i); |
| rc = of_property_read_u32_array(of, property, |
| (uint32_t *) &map[i].mem, count); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto ERROR; |
| } |
| data->num_data += map[i].mem.valid_size; |
| } |
| |
| CDBG("%s num_bytes %d\n", __func__, data->num_data); |
| |
| data->mapdata = kzalloc(data->num_data, GFP_KERNEL); |
| if (!data->mapdata) { |
| pr_err("%s failed line %d\n", __func__, __LINE__); |
| rc = -ENOMEM; |
| goto ERROR; |
| } |
| return rc; |
| |
| ERROR: |
| kfree(data->map); |
| memset(data, 0, sizeof(*data)); |
| return rc; |
| } |
| |
| static struct msm_cam_clk_info cam_8960_clk_info[] = { |
| [SENSOR_CAM_MCLK] = {"cam_clk", 24000000}, |
| }; |
| |
| static struct msm_cam_clk_info cam_8974_clk_info[] = { |
| [SENSOR_CAM_MCLK] = {"cam_src_clk", 19200000}, |
| [SENSOR_CAM_CLK] = {"cam_clk", 0}, |
| }; |
| |
| static struct v4l2_subdev_core_ops msm_eeprom_subdev_core_ops = { |
| .ioctl = msm_eeprom_subdev_ioctl, |
| }; |
| |
| static struct v4l2_subdev_ops msm_eeprom_subdev_ops = { |
| .core = &msm_eeprom_subdev_core_ops, |
| }; |
| |
| static int msm_eeprom_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| int rc = 0; |
| struct msm_eeprom_ctrl_t *e_ctrl = NULL; |
| struct msm_camera_power_ctrl_t *power_info = NULL; |
| CDBG("%s E\n", __func__); |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| pr_err("%s i2c_check_functionality failed\n", __func__); |
| goto probe_failure; |
| } |
| |
| e_ctrl = kzalloc(sizeof(*e_ctrl), GFP_KERNEL); |
| if (!e_ctrl) { |
| pr_err("%s:%d kzalloc failed\n", __func__, __LINE__); |
| return -ENOMEM; |
| } |
| e_ctrl->eeprom_v4l2_subdev_ops = &msm_eeprom_subdev_ops; |
| e_ctrl->eeprom_mutex = &msm_eeprom_mutex; |
| CDBG("%s client = %x\n", __func__, (unsigned int)client); |
| e_ctrl->eboard_info = (struct msm_eeprom_board_info *)(id->driver_data); |
| if (!e_ctrl->eboard_info) { |
| pr_err("%s:%d board info NULL\n", __func__, __LINE__); |
| rc = -EINVAL; |
| goto ectrl_free; |
| } |
| power_info = &e_ctrl->eboard_info->power_info; |
| e_ctrl->i2c_client.client = client; |
| |
| /* Set device type as I2C */ |
| e_ctrl->eeprom_device_type = MSM_CAMERA_I2C_DEVICE; |
| e_ctrl->i2c_client.i2c_func_tbl = &msm_eeprom_qup_func_tbl; |
| |
| if (e_ctrl->eboard_info->i2c_slaveaddr != 0) |
| e_ctrl->i2c_client.client->addr = |
| e_ctrl->eboard_info->i2c_slaveaddr; |
| power_info->clk_info = cam_8960_clk_info; |
| power_info->clk_info_size = ARRAY_SIZE(cam_8960_clk_info); |
| power_info->dev = &client->dev; |
| |
| /*IMPLEMENT READING PART*/ |
| /* Initialize sub device */ |
| v4l2_i2c_subdev_init(&e_ctrl->msm_sd.sd, |
| e_ctrl->i2c_client.client, |
| e_ctrl->eeprom_v4l2_subdev_ops); |
| v4l2_set_subdevdata(&e_ctrl->msm_sd.sd, e_ctrl); |
| e_ctrl->msm_sd.sd.internal_ops = &msm_eeprom_internal_ops; |
| e_ctrl->msm_sd.sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| media_entity_init(&e_ctrl->msm_sd.sd.entity, 0, NULL, 0); |
| e_ctrl->msm_sd.sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV; |
| e_ctrl->msm_sd.sd.entity.group_id = MSM_CAMERA_SUBDEV_EEPROM; |
| msm_sd_register(&e_ctrl->msm_sd); |
| CDBG("%s success result=%d X\n", __func__, rc); |
| return rc; |
| |
| ectrl_free: |
| kfree(e_ctrl); |
| probe_failure: |
| pr_err("%s failed! rc = %d\n", __func__, rc); |
| return rc; |
| } |
| |
| static int msm_eeprom_i2c_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct msm_eeprom_ctrl_t *e_ctrl; |
| if (!sd) { |
| pr_err("%s: Subdevice is NULL\n", __func__); |
| return 0; |
| } |
| |
| e_ctrl = (struct msm_eeprom_ctrl_t *)v4l2_get_subdevdata(sd); |
| if (!e_ctrl) { |
| pr_err("%s: eeprom device is NULL\n", __func__); |
| return 0; |
| } |
| |
| kfree(e_ctrl->cal_data.mapdata); |
| kfree(e_ctrl->cal_data.map); |
| if (e_ctrl->eboard_info) { |
| kfree(e_ctrl->eboard_info->power_info.gpio_conf); |
| kfree(e_ctrl->eboard_info); |
| } |
| kfree(e_ctrl); |
| return 0; |
| } |
| |
| #define msm_eeprom_spi_parse_cmd(spic, str, name, out, size) \ |
| { \ |
| if (of_property_read_u32_array( \ |
| spic->spi_master->dev.of_node, \ |
| str, out, size)) { \ |
| return -EFAULT; \ |
| } else { \ |
| spic->cmd_tbl.name.opcode = out[0]; \ |
| spic->cmd_tbl.name.addr_len = out[1]; \ |
| spic->cmd_tbl.name.dummy_len = out[2]; \ |
| } \ |
| } |
| |
| static int msm_eeprom_spi_parse_of(struct msm_camera_spi_client *spic) |
| { |
| int rc = -EFAULT; |
| uint32_t tmp[3]; |
| msm_eeprom_spi_parse_cmd(spic, "qcom,spiop,read", read, tmp, 3); |
| msm_eeprom_spi_parse_cmd(spic, "qcom,spiop,readseq", read_seq, tmp, 3); |
| msm_eeprom_spi_parse_cmd(spic, "qcom,spiop,queryid", query_id, tmp, 3); |
| |
| rc = of_property_read_u32_array(spic->spi_master->dev.of_node, |
| "qcom,eeprom-id", tmp, 2); |
| if (rc) { |
| pr_err("%s: Failed to get eeprom id\n", __func__); |
| return rc; |
| } |
| spic->mfr_id = tmp[0]; |
| spic->device_id = tmp[1]; |
| |
| return 0; |
| } |
| |
| static int msm_eeprom_match_id(struct msm_eeprom_ctrl_t *e_ctrl) |
| { |
| int rc; |
| struct msm_camera_i2c_client *client = &e_ctrl->i2c_client; |
| uint8_t id[2]; |
| |
| rc = msm_camera_spi_query_id(client, 0, &id[0], 2); |
| if (rc < 0) |
| return rc; |
| CDBG("%s: read 0x%x 0x%x, check 0x%x 0x%x\n", __func__, id[0], |
| id[1], client->spi_client->mfr_id, client->spi_client->device_id); |
| if (id[0] != client->spi_client->mfr_id |
| || id[1] != client->spi_client->device_id) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int msm_eeprom_get_dt_data(struct msm_eeprom_ctrl_t *e_ctrl) |
| { |
| int rc = 0, i = 0; |
| struct msm_eeprom_board_info *eb_info; |
| struct msm_camera_power_ctrl_t *power_info = |
| &e_ctrl->eboard_info->power_info; |
| struct device_node *of_node = NULL; |
| struct msm_camera_gpio_conf *gconf = NULL; |
| uint16_t gpio_array_size = 0; |
| uint16_t *gpio_array = NULL; |
| |
| eb_info = e_ctrl->eboard_info; |
| if (e_ctrl->eeprom_device_type == MSM_CAMERA_SPI_DEVICE) |
| of_node = e_ctrl->i2c_client. |
| spi_client->spi_master->dev.of_node; |
| else if (e_ctrl->eeprom_device_type == MSM_CAMERA_PLATFORM_DEVICE) |
| of_node = e_ctrl->pdev->dev.of_node; |
| |
| rc = msm_camera_get_dt_vreg_data(of_node, &power_info->cam_vreg, |
| &power_info->num_vreg); |
| if (rc < 0) |
| return rc; |
| |
| rc = msm_camera_get_dt_power_setting_data(of_node, |
| power_info->cam_vreg, power_info->num_vreg, |
| power_info); |
| if (rc < 0) |
| goto ERROR1; |
| |
| power_info->gpio_conf = kzalloc(sizeof(struct msm_camera_gpio_conf), |
| GFP_KERNEL); |
| if (!power_info->gpio_conf) { |
| rc = -ENOMEM; |
| goto ERROR2; |
| } |
| gconf = power_info->gpio_conf; |
| gpio_array_size = of_gpio_count(of_node); |
| CDBG("%s gpio count %d\n", __func__, gpio_array_size); |
| |
| if (gpio_array_size) { |
| gpio_array = kzalloc(sizeof(uint16_t) * gpio_array_size, |
| GFP_KERNEL); |
| if (!gpio_array) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto ERROR3; |
| } |
| for (i = 0; i < gpio_array_size; i++) { |
| gpio_array[i] = of_get_gpio(of_node, i); |
| CDBG("%s gpio_array[%d] = %d\n", __func__, i, |
| gpio_array[i]); |
| } |
| |
| rc = msm_camera_get_dt_gpio_req_tbl(of_node, gconf, |
| gpio_array, gpio_array_size); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto ERROR4; |
| } |
| |
| rc = msm_camera_init_gpio_pin_tbl(of_node, gconf, |
| gpio_array, gpio_array_size); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto ERROR4; |
| } |
| kfree(gpio_array); |
| } |
| |
| return rc; |
| ERROR4: |
| kfree(gpio_array); |
| ERROR3: |
| kfree(power_info->gpio_conf); |
| ERROR2: |
| kfree(power_info->cam_vreg); |
| ERROR1: |
| kfree(power_info->power_setting); |
| return rc; |
| } |
| |
| static int msm_eeprom_mm_dts(struct msm_eeprom_board_info *eb_info, |
| struct device_node *of_node) |
| { |
| int rc = 0; |
| struct msm_eeprom_mm_t *mm_data = &eb_info->mm_data; |
| |
| mm_data->mm_support = |
| of_property_read_bool(of_node,"qcom,mm-data-support"); |
| if (!mm_data->mm_support) |
| return -EINVAL; |
| mm_data->mm_compression = |
| of_property_read_bool(of_node,"qcom,mm-data-compressed"); |
| if (!mm_data->mm_compression) |
| pr_err("No MM compression data\n"); |
| |
| rc = of_property_read_u32(of_node, "qcom,mm-data-offset", |
| &mm_data->mm_offset); |
| if (rc < 0) |
| pr_err("No MM offset data\n"); |
| |
| rc = of_property_read_u32(of_node, "qcom,mm-data-size", |
| &mm_data->mm_size); |
| if (rc < 0) |
| pr_err("No MM size data\n"); |
| |
| CDBG("mm_support: mm_compr %d, mm_offset %d, mm_size %d\n", |
| mm_data->mm_compression, |
| mm_data->mm_offset, |
| mm_data->mm_size); |
| return 0; |
| } |
| |
| static int msm_eeprom_spi_setup(struct spi_device *spi) |
| { |
| struct msm_eeprom_ctrl_t *e_ctrl = NULL; |
| struct msm_camera_i2c_client *client = NULL; |
| struct msm_camera_spi_client *spi_client; |
| struct msm_eeprom_board_info *eb_info; |
| struct msm_camera_power_ctrl_t *power_info = NULL; |
| int rc = 0; |
| |
| e_ctrl = kzalloc(sizeof(*e_ctrl), GFP_KERNEL); |
| if (!e_ctrl) { |
| pr_err("%s:%d kzalloc failed\n", __func__, __LINE__); |
| return -ENOMEM; |
| } |
| e_ctrl->eeprom_v4l2_subdev_ops = &msm_eeprom_subdev_ops; |
| e_ctrl->eeprom_mutex = &msm_eeprom_mutex; |
| client = &e_ctrl->i2c_client; |
| e_ctrl->is_supported = 0; |
| |
| spi_client = kzalloc(sizeof(*spi_client), GFP_KERNEL); |
| if (!spi_client) { |
| pr_err("%s:%d kzalloc failed\n", __func__, __LINE__); |
| kfree(e_ctrl); |
| return -ENOMEM; |
| } |
| |
| rc = of_property_read_u32(spi->dev.of_node, "cell-index", |
| &e_ctrl->subdev_id); |
| CDBG("cell-index %d, rc %d\n", e_ctrl->subdev_id, rc); |
| if (rc < 0) { |
| pr_err("failed rc %d\n", rc); |
| return rc; |
| } |
| |
| e_ctrl->eeprom_device_type = MSM_CAMERA_SPI_DEVICE; |
| client->spi_client = spi_client; |
| spi_client->spi_master = spi; |
| client->i2c_func_tbl = &msm_eeprom_spi_func_tbl; |
| client->addr_type = MSM_CAMERA_I2C_3B_ADDR; |
| |
| eb_info = kzalloc(sizeof(*eb_info), GFP_KERNEL); |
| if (!eb_info) |
| goto spi_free; |
| e_ctrl->eboard_info = eb_info; |
| rc = of_property_read_string(spi->dev.of_node, "qcom,eeprom-name", |
| &eb_info->eeprom_name); |
| CDBG("%s qcom,eeprom-name %s, rc %d\n", __func__, |
| eb_info->eeprom_name, rc); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto board_free; |
| } |
| |
| rc = msm_eeprom_mm_dts(e_ctrl->eboard_info, spi->dev.of_node); |
| if (rc < 0) { |
| pr_err("%s MM data miss:%d\n", __func__, __LINE__); |
| } |
| |
| power_info = &eb_info->power_info; |
| |
| power_info->clk_info = cam_8974_clk_info; |
| power_info->clk_info_size = ARRAY_SIZE(cam_8974_clk_info); |
| power_info->dev = &spi->dev; |
| |
| rc = msm_eeprom_get_dt_data(e_ctrl); |
| if (rc < 0) |
| goto board_free; |
| |
| /* set spi instruction info */ |
| spi_client->retry_delay = 1; |
| spi_client->retries = 0; |
| |
| rc = msm_eeprom_spi_parse_of(spi_client); |
| if (rc < 0) { |
| dev_err(&spi->dev, |
| "%s: Error parsing device properties\n", __func__); |
| goto board_free; |
| } |
| |
| /* prepare memory buffer */ |
| rc = msm_eeprom_parse_memory_map(spi->dev.of_node, |
| &e_ctrl->cal_data); |
| if (rc < 0) |
| CDBG("%s: no cal memory map\n", __func__); |
| |
| /* power up eeprom for reading */ |
| rc = msm_camera_power_up(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| if (rc < 0) { |
| pr_err("failed rc %d\n", rc); |
| goto caldata_free; |
| } |
| |
| /* check eeprom id */ |
| rc = msm_eeprom_match_id(e_ctrl); |
| if (rc < 0) { |
| CDBG("%s: eeprom not matching %d\n", __func__, rc); |
| goto power_down; |
| } |
| /* read eeprom */ |
| if (e_ctrl->cal_data.map) { |
| rc = read_eeprom_memory(e_ctrl, &e_ctrl->cal_data); |
| if (rc < 0) { |
| pr_err("%s: read cal data failed\n", __func__); |
| goto power_down; |
| } |
| e_ctrl->is_supported |= msm_eeprom_match_crc( |
| &e_ctrl->cal_data); |
| } |
| |
| rc = msm_camera_power_down(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| if (rc < 0) { |
| pr_err("failed rc %d\n", rc); |
| goto caldata_free; |
| } |
| |
| /* initiazlie subdev */ |
| v4l2_spi_subdev_init(&e_ctrl->msm_sd.sd, |
| e_ctrl->i2c_client.spi_client->spi_master, |
| e_ctrl->eeprom_v4l2_subdev_ops); |
| v4l2_set_subdevdata(&e_ctrl->msm_sd.sd, e_ctrl); |
| e_ctrl->msm_sd.sd.internal_ops = &msm_eeprom_internal_ops; |
| e_ctrl->msm_sd.sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| media_entity_init(&e_ctrl->msm_sd.sd.entity, 0, NULL, 0); |
| e_ctrl->msm_sd.sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV; |
| e_ctrl->msm_sd.sd.entity.group_id = MSM_CAMERA_SUBDEV_EEPROM; |
| msm_sd_register(&e_ctrl->msm_sd); |
| e_ctrl->is_supported = (e_ctrl->is_supported << 1) | 1; |
| CDBG("%s success result=%d supported=%x X\n", __func__, rc, |
| e_ctrl->is_supported); |
| |
| return 0; |
| |
| power_down: |
| msm_camera_power_down(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| caldata_free: |
| kfree(e_ctrl->cal_data.mapdata); |
| kfree(e_ctrl->cal_data.map); |
| board_free: |
| kfree(e_ctrl->eboard_info); |
| spi_free: |
| kfree(spi_client); |
| kfree(e_ctrl); |
| return rc; |
| } |
| |
| static int msm_eeprom_spi_probe(struct spi_device *spi) |
| { |
| int irq, cs, cpha, cpol, cs_high; |
| |
| CDBG("%s\n", __func__); |
| spi->bits_per_word = 8; |
| spi->mode = SPI_MODE_0; |
| spi_setup(spi); |
| |
| irq = spi->irq; |
| cs = spi->chip_select; |
| cpha = (spi->mode & SPI_CPHA) ? 1 : 0; |
| cpol = (spi->mode & SPI_CPOL) ? 1 : 0; |
| cs_high = (spi->mode & SPI_CS_HIGH) ? 1 : 0; |
| CDBG("%s: irq[%d] cs[%x] CPHA[%x] CPOL[%x] CS_HIGH[%x]\n", |
| __func__, irq, cs, cpha, cpol, cs_high); |
| CDBG("%s: max_speed[%u]\n", __func__, spi->max_speed_hz); |
| |
| return msm_eeprom_spi_setup(spi); |
| } |
| |
| static int msm_eeprom_spi_remove(struct spi_device *sdev) |
| { |
| struct v4l2_subdev *sd = spi_get_drvdata(sdev); |
| struct msm_eeprom_ctrl_t *e_ctrl; |
| if (!sd) { |
| pr_err("%s: Subdevice is NULL\n", __func__); |
| return 0; |
| } |
| |
| e_ctrl = (struct msm_eeprom_ctrl_t *)v4l2_get_subdevdata(sd); |
| if (!e_ctrl) { |
| pr_err("%s: eeprom device is NULL\n", __func__); |
| return 0; |
| } |
| |
| kfree(e_ctrl->i2c_client.spi_client); |
| kfree(e_ctrl->cal_data.mapdata); |
| kfree(e_ctrl->cal_data.map); |
| if (e_ctrl->eboard_info) { |
| kfree(e_ctrl->eboard_info->power_info.gpio_conf); |
| kfree(e_ctrl->eboard_info); |
| } |
| kfree(e_ctrl); |
| return 0; |
| } |
| |
| static int msm_eeprom_platform_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| int j = 0; |
| uint32_t temp; |
| |
| struct msm_camera_cci_client *cci_client = NULL; |
| struct msm_eeprom_ctrl_t *e_ctrl = NULL; |
| struct msm_eeprom_board_info *eb_info = NULL; |
| struct device_node *of_node = pdev->dev.of_node; |
| struct msm_camera_power_ctrl_t *power_info = NULL; |
| |
| CDBG("%s E\n", __func__); |
| |
| e_ctrl = kzalloc(sizeof(*e_ctrl), GFP_KERNEL); |
| if (!e_ctrl) { |
| pr_err("%s:%d kzalloc failed\n", __func__, __LINE__); |
| return -ENOMEM; |
| } |
| e_ctrl->eeprom_v4l2_subdev_ops = &msm_eeprom_subdev_ops; |
| e_ctrl->eeprom_mutex = &msm_eeprom_mutex; |
| |
| e_ctrl->is_supported = 0; |
| if (!of_node) { |
| pr_err("%s dev.of_node NULL\n", __func__); |
| kfree(e_ctrl); |
| return -EINVAL; |
| } |
| |
| rc = of_property_read_u32(of_node, "cell-index", |
| &pdev->id); |
| CDBG("cell-index %d, rc %d\n", pdev->id, rc); |
| if (rc < 0) { |
| pr_err("failed rc %d\n", rc); |
| kfree(e_ctrl); |
| return rc; |
| } |
| e_ctrl->subdev_id = pdev->id; |
| |
| rc = of_property_read_u32(of_node, "qcom,cci-master", |
| &e_ctrl->cci_master); |
| CDBG("qcom,cci-master %d, rc %d\n", e_ctrl->cci_master, rc); |
| if (rc < 0) { |
| pr_err("%s failed rc %d\n", __func__, rc); |
| kfree(e_ctrl); |
| return rc; |
| } |
| rc = of_property_read_u32(of_node, "qcom,slave-addr", |
| &temp); |
| if (rc < 0) { |
| pr_err("%s failed rc %d\n", __func__, rc); |
| kfree(e_ctrl); |
| return rc; |
| } |
| |
| /* Set platform device handle */ |
| e_ctrl->pdev = pdev; |
| /* Set device type as platform device */ |
| e_ctrl->eeprom_device_type = MSM_CAMERA_PLATFORM_DEVICE; |
| e_ctrl->i2c_client.i2c_func_tbl = &msm_eeprom_cci_func_tbl; |
| e_ctrl->i2c_client.cci_client = kzalloc(sizeof( |
| struct msm_camera_cci_client), GFP_KERNEL); |
| if (!e_ctrl->i2c_client.cci_client) { |
| pr_err("%s failed no memory\n", __func__); |
| kfree(e_ctrl); |
| return -ENOMEM; |
| } |
| |
| e_ctrl->eboard_info = kzalloc(sizeof( |
| struct msm_eeprom_board_info), GFP_KERNEL); |
| if (!e_ctrl->eboard_info) { |
| pr_err("%s failed line %d\n", __func__, __LINE__); |
| rc = -ENOMEM; |
| goto cciclient_free; |
| } |
| eb_info = e_ctrl->eboard_info; |
| power_info = &eb_info->power_info; |
| eb_info->i2c_slaveaddr = temp; |
| |
| power_info->clk_info = cam_8974_clk_info; |
| power_info->clk_info_size = ARRAY_SIZE(cam_8974_clk_info); |
| power_info->dev = &pdev->dev; |
| |
| CDBG("qcom,slave-addr = 0x%X\n", eb_info->i2c_slaveaddr); |
| cci_client = e_ctrl->i2c_client.cci_client; |
| cci_client->cci_subdev = msm_cci_get_subdev(); |
| cci_client->cci_i2c_master = e_ctrl->cci_master; |
| cci_client->sid = eb_info->i2c_slaveaddr >> 1; |
| cci_client->retries = 3; |
| cci_client->id_map = 0; |
| |
| rc = of_property_read_string(of_node, "qcom,eeprom-name", |
| &eb_info->eeprom_name); |
| CDBG("%s qcom,eeprom-name %s, rc %d\n", __func__, |
| eb_info->eeprom_name, rc); |
| if (rc < 0) { |
| pr_err("%s failed %d\n", __func__, __LINE__); |
| goto board_free; |
| } |
| |
| rc = msm_eeprom_mm_dts(e_ctrl->eboard_info, of_node); |
| if (rc < 0) { |
| pr_err("%s MM data miss:%d\n", __func__, __LINE__); |
| } |
| rc = msm_eeprom_get_dt_data(e_ctrl); |
| if (rc) |
| goto board_free; |
| |
| rc = msm_eeprom_parse_memory_map(of_node, &e_ctrl->cal_data); |
| if (rc < 0) |
| goto board_free; |
| |
| rc = msm_camera_power_up(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| if (rc) { |
| pr_err("failed rc %d\n", rc); |
| goto memdata_free; |
| } |
| rc = read_eeprom_memory(e_ctrl, &e_ctrl->cal_data); |
| if (rc < 0) { |
| pr_err("%s read_eeprom_memory failed\n", __func__); |
| goto power_down; |
| } |
| for (j = 0; j < e_ctrl->cal_data.num_data; j++) |
| CDBG("memory_data[%d] = 0x%X\n", j, |
| e_ctrl->cal_data.mapdata[j]); |
| |
| e_ctrl->is_supported |= msm_eeprom_match_crc(&e_ctrl->cal_data); |
| |
| rc = msm_camera_power_down(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| if (rc) { |
| pr_err("failed rc %d\n", rc); |
| goto memdata_free; |
| } |
| v4l2_subdev_init(&e_ctrl->msm_sd.sd, |
| e_ctrl->eeprom_v4l2_subdev_ops); |
| v4l2_set_subdevdata(&e_ctrl->msm_sd.sd, e_ctrl); |
| platform_set_drvdata(pdev, &e_ctrl->msm_sd.sd); |
| e_ctrl->msm_sd.sd.internal_ops = &msm_eeprom_internal_ops; |
| e_ctrl->msm_sd.sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| snprintf(e_ctrl->msm_sd.sd.name, |
| ARRAY_SIZE(e_ctrl->msm_sd.sd.name), "msm_eeprom"); |
| media_entity_init(&e_ctrl->msm_sd.sd.entity, 0, NULL, 0); |
| e_ctrl->msm_sd.sd.entity.type = MEDIA_ENT_T_V4L2_SUBDEV; |
| e_ctrl->msm_sd.sd.entity.group_id = MSM_CAMERA_SUBDEV_EEPROM; |
| msm_sd_register(&e_ctrl->msm_sd); |
| |
| e_ctrl->is_supported = (e_ctrl->is_supported << 1) | 1; |
| CDBG("%s X\n", __func__); |
| return rc; |
| |
| power_down: |
| msm_camera_power_down(power_info, e_ctrl->eeprom_device_type, |
| &e_ctrl->i2c_client); |
| memdata_free: |
| kfree(e_ctrl->cal_data.mapdata); |
| kfree(e_ctrl->cal_data.map); |
| board_free: |
| kfree(e_ctrl->eboard_info); |
| cciclient_free: |
| kfree(e_ctrl->i2c_client.cci_client); |
| kfree(e_ctrl); |
| return rc; |
| } |
| |
| static int msm_eeprom_platform_remove(struct platform_device *pdev) |
| { |
| struct v4l2_subdev *sd = platform_get_drvdata(pdev); |
| struct msm_eeprom_ctrl_t *e_ctrl; |
| if (!sd) { |
| pr_err("%s: Subdevice is NULL\n", __func__); |
| return 0; |
| } |
| |
| e_ctrl = (struct msm_eeprom_ctrl_t *)v4l2_get_subdevdata(sd); |
| if (!e_ctrl) { |
| pr_err("%s: eeprom device is NULL\n", __func__); |
| return 0; |
| } |
| |
| kfree(e_ctrl->i2c_client.cci_client); |
| kfree(e_ctrl->cal_data.mapdata); |
| kfree(e_ctrl->cal_data.map); |
| if (e_ctrl->eboard_info) { |
| kfree(e_ctrl->eboard_info->power_info.gpio_conf); |
| kfree(e_ctrl->eboard_info); |
| } |
| kfree(e_ctrl); |
| return 0; |
| } |
| |
| static const struct of_device_id msm_eeprom_dt_match[] = { |
| { .compatible = "qcom,eeprom" }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, msm_eeprom_dt_match); |
| |
| static struct platform_driver msm_eeprom_platform_driver = { |
| .driver = { |
| .name = "qcom,eeprom", |
| .owner = THIS_MODULE, |
| .of_match_table = msm_eeprom_dt_match, |
| }, |
| .remove = __devexit_p(msm_eeprom_platform_remove), |
| }; |
| |
| static const struct i2c_device_id msm_eeprom_i2c_id[] = { |
| { "msm_eeprom", (kernel_ulong_t)NULL}, |
| { } |
| }; |
| |
| static struct i2c_driver msm_eeprom_i2c_driver = { |
| .id_table = msm_eeprom_i2c_id, |
| .probe = msm_eeprom_i2c_probe, |
| .remove = __devexit_p(msm_eeprom_i2c_remove), |
| .driver = { |
| .name = "msm_eeprom", |
| }, |
| }; |
| |
| static struct spi_driver msm_eeprom_spi_driver = { |
| .driver = { |
| .name = "qcom_eeprom", |
| .owner = THIS_MODULE, |
| .of_match_table = msm_eeprom_dt_match, |
| }, |
| .probe = msm_eeprom_spi_probe, |
| .remove = __devexit_p(msm_eeprom_spi_remove), |
| }; |
| |
| static int __init msm_eeprom_init_module(void) |
| { |
| int rc = 0; |
| CDBG("%s E\n", __func__); |
| rc = platform_driver_probe(&msm_eeprom_platform_driver, |
| msm_eeprom_platform_probe); |
| CDBG("%s:%d platform rc %d\n", __func__, __LINE__, rc); |
| rc = spi_register_driver(&msm_eeprom_spi_driver); |
| CDBG("%s:%d spi rc %d\n", __func__, __LINE__, rc); |
| return i2c_add_driver(&msm_eeprom_i2c_driver); |
| } |
| |
| static void __exit msm_eeprom_exit_module(void) |
| { |
| platform_driver_unregister(&msm_eeprom_platform_driver); |
| spi_unregister_driver(&msm_eeprom_spi_driver); |
| i2c_del_driver(&msm_eeprom_i2c_driver); |
| } |
| |
| module_init(msm_eeprom_init_module); |
| module_exit(msm_eeprom_exit_module); |
| MODULE_DESCRIPTION("MSM EEPROM driver"); |
| MODULE_LICENSE("GPL v2"); |