arch/arm/mach-msm/board-8974-gpiomux.c

/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/init.h>
#include <linux/ioport.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/gpiomux.h>
#include <mach/socinfo.h>

#define KS8851_IRQ_GPIO 94

static struct gpiomux_setting gpio_uart_config = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_16MA,
	.pull = GPIOMUX_PULL_NONE,
	.dir = GPIOMUX_OUT_HIGH,
};

static struct gpiomux_setting slimbus = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_KEEPER,
};

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
static struct gpiomux_setting gpio_eth_config = {
	.pull = GPIOMUX_PULL_UP,
	.drv = GPIOMUX_DRV_2MA,
	.func = GPIOMUX_FUNC_GPIO,
};

static struct gpiomux_setting gpio_spi_cs2_config = {
	.func = GPIOMUX_FUNC_4,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting gpio_spi_config = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_12MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting gpio_spi_cs1_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct msm_gpiomux_config msm_eth_configs[] = {
	{
		.gpio = KS8851_IRQ_GPIO,
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_eth_config,
		}
	},
};
#endif

static struct gpiomux_setting gpio_suspend_config[] = {
	{
		.func = GPIOMUX_FUNC_GPIO,  /* IN-NP */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},
	{
		.func = GPIOMUX_FUNC_GPIO,  /* O-LOW */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
		.dir = GPIOMUX_OUT_LOW,
	},
};

static struct gpiomux_setting gpio_epm_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv  = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting wcnss_5wire_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv  = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting wcnss_5wire_active_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv  = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting gpio_i2c_config = {
	.func = GPIOMUX_FUNC_3,
	/*
	 * Please keep I2C GPIOs drive-strength at minimum (2ma). It is a
	 * workaround for HW issue of glitches caused by rapid GPIO current-
	 * change.
	 */
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting lcd_en_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
	.dir = GPIOMUX_OUT_HIGH,
};

static struct gpiomux_setting lcd_en_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting atmel_resout_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting atmel_resout_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting atmel_int_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting atmel_int_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting taiko_reset = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_6MA,
	.pull = GPIOMUX_PULL_NONE,
	.dir = GPIOMUX_OUT_LOW,
};

static struct gpiomux_setting taiko_int = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
};
static struct gpiomux_setting hap_lvl_shft_suspended_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting hap_lvl_shft_active_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};
static struct msm_gpiomux_config hap_lvl_shft_config[] __initdata = {
	{
		.gpio = 86,
		.settings = {
			[GPIOMUX_SUSPENDED] = &hap_lvl_shft_suspended_config,
			[GPIOMUX_ACTIVE] = &hap_lvl_shft_active_config,
		},
	},
};

static struct msm_gpiomux_config msm_touch_configs[] __initdata = {
	{
		.gpio      = 60,		/* TOUCH RESET */
		.settings = {
			[GPIOMUX_ACTIVE] = &atmel_resout_act_cfg,
			[GPIOMUX_SUSPENDED] = &atmel_resout_sus_cfg,
		},
	},
	{
		.gpio      = 61,		/* TOUCH IRQ */
		.settings = {
			[GPIOMUX_ACTIVE] = &atmel_int_act_cfg,
			[GPIOMUX_SUSPENDED] = &atmel_int_sus_cfg,
		},
	},

};

static struct gpiomux_setting hsic_sus_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting hsic_act_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_12MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting hsic_hub_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_IN,
};

static struct gpiomux_setting hsic_resume_act_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
	.dir = GPIOMUX_OUT_LOW,
};

static struct gpiomux_setting hsic_resume_susp_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct msm_gpiomux_config msm_hsic_configs[] = {
	{
		.gpio = 144,               /*HSIC_STROBE */
		.settings = {
			[GPIOMUX_ACTIVE] = &hsic_act_cfg,
			[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
		},
	},
	{
		.gpio = 145,               /* HSIC_DATA */
		.settings = {
			[GPIOMUX_ACTIVE] = &hsic_act_cfg,
			[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
		},
	},
	{
		.gpio = 80,
		.settings = {
			[GPIOMUX_ACTIVE] = &hsic_resume_act_cfg,
			[GPIOMUX_SUSPENDED] = &hsic_resume_susp_cfg,
		},
	},
};

static struct msm_gpiomux_config msm_hsic_hub_configs[] = {
	{
		.gpio = 50,               /* HSIC_HUB_INT_N */
		.settings = {
			[GPIOMUX_ACTIVE] = &hsic_hub_act_cfg,
			[GPIOMUX_SUSPENDED] = &hsic_sus_cfg,
		},
	},
};

static struct gpiomux_setting mhl_suspend_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting mhl_active_1_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_OUT_HIGH,
};

static struct gpiomux_setting hdmi_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting hdmi_active_1_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting hdmi_active_2_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_16MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct msm_gpiomux_config msm_mhl_configs[] __initdata = {
	{
		/* mhl-sii8334 pwr */
		.gpio = 12,
		.settings = {
			[GPIOMUX_SUSPENDED] = &mhl_suspend_config,
			[GPIOMUX_ACTIVE]    = &mhl_active_1_cfg,
		},
	},
	{
		/* mhl-sii8334 intr */
		.gpio = 82,
		.settings = {
			[GPIOMUX_SUSPENDED] = &mhl_suspend_config,
			[GPIOMUX_ACTIVE]    = &mhl_active_1_cfg,
		},
	},
};


static struct msm_gpiomux_config msm_hdmi_configs[] __initdata = {
	{
		.gpio = 31,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 32,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 33,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 34,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_2_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
};

static struct gpiomux_setting gpio_uart7_active_cfg = {
	.func = GPIOMUX_FUNC_3,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting gpio_uart7_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct msm_gpiomux_config msm_blsp2_uart7_configs[] __initdata = {
	{
		.gpio	= 41,	/* BLSP2 UART7 TX */
		.settings = {
			[GPIOMUX_ACTIVE]    = &gpio_uart7_active_cfg,
			[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
		},
	},
	{
		.gpio	= 42,	/* BLSP2 UART7 RX */
		.settings = {
			[GPIOMUX_ACTIVE]    = &gpio_uart7_active_cfg,
			[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
		},
	},
	{
		.gpio	= 43,	/* BLSP2 UART7 CTS */
		.settings = {
			[GPIOMUX_ACTIVE]    = &gpio_uart7_active_cfg,
			[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
		},
	},
	{
		.gpio	= 44,	/* BLSP2 UART7 RFR */
		.settings = {
			[GPIOMUX_ACTIVE]    = &gpio_uart7_active_cfg,
			[GPIOMUX_SUSPENDED] = &gpio_uart7_suspend_cfg,
		},
	},
};

static struct msm_gpiomux_config msm_rumi_blsp_configs[] __initdata = {
	{
		.gpio      = 45,	/* BLSP2 UART8 TX */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_uart_config,
		},
	},
	{
		.gpio      = 46,	/* BLSP2 UART8 RX */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_uart_config,
		},
	},
};

static struct msm_gpiomux_config msm_lcd_configs[] __initdata = {
	{
		.gpio = 58,
		.settings = {
			[GPIOMUX_ACTIVE]    = &lcd_en_act_cfg,
			[GPIOMUX_SUSPENDED] = &lcd_en_sus_cfg,
		},
	},
};

static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	{
		.gpio      = 0,		/* BLSP1 QUP SPI_DATA_MOSI */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_spi_config,
		},
	},
	{
		.gpio      = 1,		/* BLSP1 QUP SPI_DATA_MISO */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_spi_config,
		},
	},
	{
		.gpio      = 3,		/* BLSP1 QUP SPI_CLK */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_spi_config,
		},
	},
	{
		.gpio      = 9,		/* BLSP1 QUP SPI_CS2A_N */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_spi_cs2_config,
		},
	},
	{
		.gpio      = 8,		/* BLSP1 QUP SPI_CS1_N */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_spi_cs1_config,
		},
	},
#endif
	{
		.gpio      = 6,		/* BLSP1 QUP2 I2C_DAT */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
		},
	},
	{
		.gpio      = 7,		/* BLSP1 QUP2 I2C_CLK */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
		},
	},
	{
		.gpio      = 83,		/* BLSP11 QUP I2C_DAT */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
		},
	},
	{
		.gpio      = 84,		/* BLSP11 QUP I2C_CLK */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_i2c_config,
		},
	},
	{
		.gpio      = 4,			/* BLSP2 UART TX */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_uart_config,
		},
	},
	{
		.gpio      = 5,			/* BLSP2 UART RX */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_uart_config,
		},
	},
	{
		.gpio      = 53,		/* BLSP2 QUP4 SPI_DATA_MOSI */
		.settings = {
			[GPIOMUX_ACTIVE] = &gpio_spi_config,
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio      = 54,		/* BLSP2 QUP4 SPI_DATA_MISO */
		.settings = {
			[GPIOMUX_ACTIVE] = &gpio_spi_config,
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio      = 56,		/* BLSP2 QUP4 SPI_CLK */
		.settings = {
			[GPIOMUX_ACTIVE] = &gpio_spi_config,
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio      = 55,		/* BLSP2 QUP4 SPI_CS0_N */
		.settings = {
			[GPIOMUX_ACTIVE] = &gpio_spi_config,
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio      = 81,		/* EPM enable */
		.settings = {
			[GPIOMUX_SUSPENDED] = &gpio_epm_config,
		},
	},
};

static struct msm_gpiomux_config msm8974_slimbus_config[] __initdata = {
	{
		.gpio	= 70,		/* slimbus clk */
		.settings = {
			[GPIOMUX_SUSPENDED] = &slimbus,
		},
	},
	{
		.gpio	= 71,		/* slimbus data */
		.settings = {
			[GPIOMUX_SUSPENDED] = &slimbus,
		},
	},
};

static struct gpiomux_setting cam_settings[] = {
	{
		.func = GPIOMUX_FUNC_1, /*active 1*/ /* 0 */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_1, /*suspend*/ /* 1 */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_DOWN,
	},

	{
		.func = GPIOMUX_FUNC_1, /*i2c suspend*/ /* 2 */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_KEEPER,
	},

	{
		.func = GPIOMUX_FUNC_GPIO, /*active 0*/ /* 3 */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_NONE,
	},

	{
		.func = GPIOMUX_FUNC_GPIO, /*suspend 0*/ /* 4 */
		.drv = GPIOMUX_DRV_2MA,
		.pull = GPIOMUX_PULL_DOWN,
	},
};

static struct gpiomux_setting sd_card_det_active_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_NONE,
	.dir = GPIOMUX_IN,
};

static struct gpiomux_setting sd_card_det_sleep_config = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
	.dir = GPIOMUX_IN,
};

static struct msm_gpiomux_config sd_card_det __initdata = {
	.gpio = 62,
	.settings = {
		[GPIOMUX_ACTIVE]    = &sd_card_det_active_config,
		[GPIOMUX_SUSPENDED] = &sd_card_det_sleep_config,
	},
};

static struct msm_gpiomux_config msm_sensor_configs[] __initdata = {
	{
		.gpio = 15, /* CAM_MCLK0 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &cam_settings[1],
		},
	},
	{
		.gpio = 16, /* CAM_MCLK1 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &cam_settings[1],
		},
	},
	{
		.gpio = 17, /* CAM_MCLK2 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &cam_settings[1],
		},
	},
	{
		.gpio = 18, /* WEBCAM1_RESET_N / CAM_MCLK3 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &cam_settings[4],
		},
	},
	{
		.gpio = 19, /* CCI_I2C_SDA0 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio = 20, /* CCI_I2C_SCL0 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio = 21, /* CCI_I2C_SDA1 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio = 22, /* CCI_I2C_SCL1 */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[0],
		},
	},
	{
		.gpio = 23, /* FLASH_LED_EN */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 24, /* FLASH_LED_NOW */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 25, /* WEBCAM2_RESET_N */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 26, /* CAM_IRQ */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &cam_settings[1],
		},
	},
	{
		.gpio = 27, /* OIS_SYNC */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[0],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 28, /* WEBCAM1_STANDBY */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 89, /* CAM1_STANDBY_N */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 90, /* CAM1_RST_N */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 91, /* CAM2_STANDBY_N */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
	{
		.gpio = 92, /* CAM2_RST_N */
		.settings = {
			[GPIOMUX_ACTIVE]    = &cam_settings[3],
			[GPIOMUX_SUSPENDED] = &gpio_suspend_config[1],
		},
	},
};

static struct gpiomux_setting pri_auxpcm_act_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
};


static struct gpiomux_setting pri_auxpcm_sus_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct msm_gpiomux_config msm8974_pri_auxpcm_configs[] __initdata = {
	{
		.gpio = 65,
		.settings = {
			[GPIOMUX_SUSPENDED] = &pri_auxpcm_sus_cfg,
			[GPIOMUX_ACTIVE] = &pri_auxpcm_act_cfg,
		},
	},
	{
		.gpio = 66,
		.settings = {
			[GPIOMUX_SUSPENDED] = &pri_auxpcm_sus_cfg,
			[GPIOMUX_ACTIVE] = &pri_auxpcm_act_cfg,
		},
	},
	{
		.gpio = 67,
		.settings = {
			[GPIOMUX_SUSPENDED] = &pri_auxpcm_sus_cfg,
			[GPIOMUX_ACTIVE] = &pri_auxpcm_act_cfg,
		},
	},
	{
		.gpio = 68,
		.settings = {
			[GPIOMUX_SUSPENDED] = &pri_auxpcm_sus_cfg,
			[GPIOMUX_ACTIVE] = &pri_auxpcm_act_cfg,
		},
	},
};

static struct msm_gpiomux_config wcnss_5wire_interface[] = {
	{
		.gpio = 36,
		.settings = {
			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
		},
	},
	{
		.gpio = 37,
		.settings = {
			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
		},
	},
	{
		.gpio = 38,
		.settings = {
			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
		},
	},
	{
		.gpio = 39,
		.settings = {
			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
		},
	},
	{
		.gpio = 40,
		.settings = {
			[GPIOMUX_ACTIVE]    = &wcnss_5wire_active_cfg,
			[GPIOMUX_SUSPENDED] = &wcnss_5wire_suspend_cfg,
		},
	},
};

static struct msm_gpiomux_config msm_taiko_config[] __initdata = {
	{
		.gpio	= 63,		/* SYS_RST_N */
		.settings = {
			[GPIOMUX_SUSPENDED] = &taiko_reset,
		},
	},
	{
		.gpio	= 72,		/* CDC_INT */
		.settings = {
			[GPIOMUX_SUSPENDED] = &taiko_int,
		},
	},
};

#ifdef CONFIG_MMC_MSM_SDC3_SUPPORT
static struct gpiomux_setting sdc3_clk_actv_cfg = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting sdc3_cmd_data_0_3_actv_cfg = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting sdc3_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting sdc3_data_1_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct msm_gpiomux_config msm8974_sdc3_configs[] __initdata = {
	{
		/* DAT3 */
		.gpio      = 35,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg,
		},
	},
	{
		/* DAT2 */
		.gpio      = 36,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg,
		},
	},
	{
		/* DAT1 */
		.gpio      = 37,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_data_1_suspend_cfg,
		},
	},
	{
		/* DAT0 */
		.gpio      = 38,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg,
		},
	},
	{
		/* CMD */
		.gpio      = 39,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg,
		},
	},
	{
		/* CLK */
		.gpio      = 40,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc3_clk_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc3_suspend_cfg,
		},
	},
};

static void msm_gpiomux_sdc3_install(void)
{
	msm_gpiomux_install(msm8974_sdc3_configs,
			    ARRAY_SIZE(msm8974_sdc3_configs));
}
#else
static void msm_gpiomux_sdc3_install(void) {}
#endif /* CONFIG_MMC_MSM_SDC3_SUPPORT */

#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
static struct gpiomux_setting sdc4_clk_actv_cfg = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_NONE,
};

static struct gpiomux_setting sdc4_cmd_data_0_3_actv_cfg = {
	.func = GPIOMUX_FUNC_2,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting sdc4_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting sdc4_data_1_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_8MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct msm_gpiomux_config msm8974_sdc4_configs[] __initdata = {
	{
		/* DAT3 */
		.gpio      = 92,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_suspend_cfg,
		},
	},
	{
		/* DAT2 */
		.gpio      = 94,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_suspend_cfg,
		},
	},
	{
		/* DAT1 */
		.gpio      = 95,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_data_1_suspend_cfg,
		},
	},
	{
		/* DAT0 */
		.gpio      = 96,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_suspend_cfg,
		},
	},
	{
		/* CMD */
		.gpio      = 91,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_cmd_data_0_3_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_suspend_cfg,
		},
	},
	{
		/* CLK */
		.gpio      = 93,
		.settings = {
			[GPIOMUX_ACTIVE]    = &sdc4_clk_actv_cfg,
			[GPIOMUX_SUSPENDED] = &sdc4_suspend_cfg,
		},
	},
};

static void msm_gpiomux_sdc4_install(void)
{
	msm_gpiomux_install(msm8974_sdc4_configs,
			    ARRAY_SIZE(msm8974_sdc4_configs));
}
#else
static void msm_gpiomux_sdc4_install(void) {}
#endif /* CONFIG_MMC_MSM_SDC4_SUPPORT */

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (machine_is_msm8974_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (machine_is_msm8974_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
}