| /* |
| * arch/ppc/kernel/ibm440gx_common.c |
| * |
| * PPC440GX system library |
| * |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| * Copyright (c) 2003, 2004 Zultys Technologies |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <asm/ibm44x.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <syslib/ibm440gx_common.h> |
| |
| /* |
| * Calculate 440GX clocks |
| */ |
| static inline u32 __fix_zero(u32 v, u32 def){ |
| return v ? v : def; |
| } |
| |
| void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk, |
| unsigned int ser_clk) |
| { |
| u32 pllc = CPR_READ(DCRN_CPR_PLLC); |
| u32 plld = CPR_READ(DCRN_CPR_PLLD); |
| u32 uart0 = SDR_READ(DCRN_SDR_UART0); |
| u32 uart1 = SDR_READ(DCRN_SDR_UART1); |
| #ifdef CONFIG_440EP |
| u32 uart2 = SDR_READ(DCRN_SDR_UART2); |
| u32 uart3 = SDR_READ(DCRN_SDR_UART3); |
| #endif |
| |
| /* Dividers */ |
| u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); |
| u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16); |
| u32 fwdvb = __fix_zero((plld >> 8) & 7, 8); |
| u32 lfbdv = __fix_zero(plld & 0x3f, 64); |
| u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8); |
| u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8); |
| u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4); |
| u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4); |
| |
| /* Input clocks for primary dividers */ |
| u32 clk_a, clk_b; |
| |
| if (pllc & 0x40000000){ |
| u32 m; |
| |
| /* Feedback path */ |
| switch ((pllc >> 24) & 7){ |
| case 0: |
| /* PLLOUTx */ |
| m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv; |
| break; |
| case 1: |
| /* CPU */ |
| m = fwdva * pradv0; |
| break; |
| case 5: |
| /* PERClk */ |
| m = fwdvb * prbdv0 * opbdv0 * perdv0; |
| break; |
| default: |
| printk(KERN_EMERG "invalid PLL feedback source\n"); |
| goto bypass; |
| } |
| m *= fbdv; |
| p->vco = sys_clk * m; |
| clk_a = p->vco / fwdva; |
| clk_b = p->vco / fwdvb; |
| } |
| else { |
| bypass: |
| /* Bypass system PLL */ |
| p->vco = 0; |
| clk_a = clk_b = sys_clk; |
| } |
| |
| p->cpu = clk_a / pradv0; |
| p->plb = clk_b / prbdv0; |
| p->opb = p->plb / opbdv0; |
| p->ebc = p->opb / perdv0; |
| |
| /* UARTs clock */ |
| if (uart0 & 0x00800000) |
| p->uart0 = ser_clk; |
| else |
| p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256); |
| |
| if (uart1 & 0x00800000) |
| p->uart1 = ser_clk; |
| else |
| p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256); |
| #ifdef CONFIG_440EP |
| if (uart2 & 0x00800000) |
| p->uart2 = ser_clk; |
| else |
| p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256); |
| |
| if (uart3 & 0x00800000) |
| p->uart3 = ser_clk; |
| else |
| p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256); |
| #endif |
| } |
| |
| /* Issue L2C diagnostic command */ |
| static inline u32 l2c_diag(u32 addr) |
| { |
| mtdcr(DCRN_L2C0_ADDR, addr); |
| mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG); |
| while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ; |
| return mfdcr(DCRN_L2C0_DATA); |
| } |
| |
| static irqreturn_t l2c_error_handler(int irq, void* dev, struct pt_regs* regs) |
| { |
| u32 sr = mfdcr(DCRN_L2C0_SR); |
| if (sr & L2C_SR_CPE){ |
| /* Read cache trapped address */ |
| u32 addr = l2c_diag(0x42000000); |
| printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr); |
| } |
| if (sr & L2C_SR_TPE){ |
| /* Read tag trapped address */ |
| u32 addr = l2c_diag(0x82000000) >> 16; |
| printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr); |
| } |
| |
| /* Clear parity errors */ |
| if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ |
| mtdcr(DCRN_L2C0_ADDR, 0); |
| mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| } else |
| printk(KERN_EMERG "L2C: LRU error\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Enable L2 cache */ |
| void __init ibm440gx_l2c_enable(void){ |
| u32 r; |
| unsigned long flags; |
| |
| /* Install error handler */ |
| if (request_irq(87, l2c_error_handler, SA_INTERRUPT, "L2C", 0) < 0){ |
| printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n"); |
| return; |
| } |
| |
| local_irq_save(flags); |
| asm volatile ("sync" ::: "memory"); |
| |
| /* Disable SRAM */ |
| mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); |
| mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); |
| mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); |
| |
| /* Enable L2_MODE without ICU/DCU */ |
| r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); |
| r |= L2C_CFG_L2M | L2C_CFG_SS_256; |
| mtdcr(DCRN_L2C0_CFG, r); |
| |
| mtdcr(DCRN_L2C0_ADDR, 0); |
| |
| /* Hardware Clear Command */ |
| mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC); |
| while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ; |
| |
| /* Clear Cache Parity and Tag Errors */ |
| mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| |
| /* Enable 64G snoop region starting at 0 */ |
| r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| mtdcr(DCRN_L2C0_SNP0, r); |
| |
| r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| mtdcr(DCRN_L2C0_SNP1, r); |
| |
| asm volatile ("sync" ::: "memory"); |
| |
| /* Enable ICU/DCU ports */ |
| r = mfdcr(DCRN_L2C0_CFG); |
| r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI |
| | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); |
| r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN |
| | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; |
| mtdcr(DCRN_L2C0_CFG, r); |
| |
| asm volatile ("sync; isync" ::: "memory"); |
| local_irq_restore(flags); |
| } |
| |
| /* Disable L2 cache */ |
| void __init ibm440gx_l2c_disable(void){ |
| u32 r; |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| asm volatile ("sync" ::: "memory"); |
| |
| /* Disable L2C mode */ |
| r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU); |
| mtdcr(DCRN_L2C0_CFG, r); |
| |
| /* Enable SRAM */ |
| mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE); |
| mtdcr(DCRN_SRAM0_SB0CR, |
| SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW); |
| mtdcr(DCRN_SRAM0_SB1CR, |
| SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW); |
| mtdcr(DCRN_SRAM0_SB2CR, |
| SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW); |
| mtdcr(DCRN_SRAM0_SB3CR, |
| SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW); |
| |
| asm volatile ("sync; isync" ::: "memory"); |
| local_irq_restore(flags); |
| } |
| |
| void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p) |
| { |
| /* Disable L2C on rev.A, rev.B and 800MHz version of rev.C, |
| enable it on all other revisions |
| */ |
| if (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. A") == 0 || |
| strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. B") == 0 |
| || (strcmp(cur_cpu_spec[0]->cpu_name, "440GX Rev. C") |
| == 0 && p->cpu > 667000000)) |
| ibm440gx_l2c_disable(); |
| else |
| ibm440gx_l2c_enable(); |
| } |
| |
| int __init ibm440gx_get_eth_grp(void) |
| { |
| return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT; |
| } |
| |
| void __init ibm440gx_set_eth_grp(int group) |
| { |
| SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT)); |
| } |
| |
| void __init ibm440gx_tah_enable(void) |
| { |
| /* Enable TAH0 and TAH1 */ |
| SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) & |
| ~DCRN_SDR_MFR_TAH0); |
| SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) & |
| ~DCRN_SDR_MFR_TAH1); |
| } |
| |
| int ibm440gx_show_cpuinfo(struct seq_file *m){ |
| |
| u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG); |
| const char* s; |
| if (l2c_cfg & L2C_CFG_L2M){ |
| switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){ |
| case L2C_CFG_ICU: s = "I-Cache only"; break; |
| case L2C_CFG_DCU: s = "D-Cache only"; break; |
| default: s = "I-Cache/D-Cache"; break; |
| } |
| } |
| else |
| s = "disabled"; |
| |
| seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s, |
| l2c_cfg, mfdcr(DCRN_L2C0_SR)); |
| |
| return 0; |
| } |
| |