arch/arm/boot/dts/msm9625.dts

/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
/include/ "skeleton.dtsi"

/ {
	model = "Qualcomm MSM 9625";
	compatible = "qcom,msm9625";
	interrupt-parent = <&intc>;

	intc: interrupt-controller@F9000000 {
		compatible = "qcom,msm-qgic2";
		interrupt-controller;
		#interrupt-cells = <3>;
		reg = <0xF9000000 0x1000>,
		      <0xF9002000 0x1000>;
	};

	l2: cache-controller@f9040000 {
		compatible = "arm,pl310-cache";
		reg = <0xf9040000 0x1000>;
		arm,data-latency = <1 1 1>;
		arm,tag-latency = <1 1 1>;
		cache-unified;
		cache-level = <2>;
	};

	msmgpio: gpio@fd510000 {
		compatible = "qcom,msm-gpio";
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		reg = <0xfd510000 0x4000>;
		#gpio-cells = <2>;
	};

	timer: msm-qtimer@f9021000 {
		compatible = "qcom,msm-qtimer", "arm,armv7-timer";
		reg = <0xF9021000 0x1000>;
		interrupts = <0 7 0>;
		irq-is-not-percpu;
		clock-frequency = <5000000>;
	};

	qcom,sps@f9980000 {
		compatible = "qcom,msm_sps";
		reg = <0xf9984000 0x15000>,
		      <0xf9999000 0xb000>,
		      <0xfe800000 0x4800>;
		interrupts = <0 94 0>;
		qcom,device-type = <2>;
	};

	serial@f991f000 {
		compatible = "qcom,msm-lsuart-v14";
		reg = <0xf991f000 0x1000>;
		interrupts = <0 109 0>;
	};

	qcom,nand@f9ac0000 {
		compatible = "qcom,msm-nand";
		reg = <0xf9ac0000 0x1000>,
		      <0xf9ac4000 0x8000>;
		reg-names = "nand_phys",
			    "bam_phys";
		interrupts = <0 247 0>;
		interrupt-names = "bam_irq";
	};

	spi@f9928000 {
		compatible = "qcom,spi-qup-v2";
		reg = <0xf9928000 0x1000>;
		interrupts = <0 100 0>;
		spi-max-frequency = <24000000>;
		#address-cells = <1>;
		#size-cells = <0>;
		gpios = <&msmgpio 23 0>, /* CLK  */
			<&msmgpio 21 0>, /* MISO */
			<&msmgpio 20 0>; /* MOSI */

		cs-gpios = <&msmgpio 69 0>;

		ethernet-switch@0 {
			compatible = "simtec,ks8851";
			reg = <0>;
			interrupt-parent = <&msmgpio>;
			interrupts = <75 0>;
			spi-max-frequency = <5000000>;
		};
	};
};