| /* Copyright (c) 2011-2012, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/bitops.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c/smb349.h> |
| #include <linux/i2c/sx150x.h> |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/mfd/wcd9xxx/core.h> |
| #include <linux/mfd/wcd9xxx/pdata.h> |
| #include <linux/mfd/pm8xxx/misc.h> |
| #include <linux/msm_ssbi.h> |
| #include <linux/spi/spi.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_data/qcom_crypto_device.h> |
| #include <linux/msm_ion.h> |
| #include <linux/memory.h> |
| #include <linux/memblock.h> |
| #include <linux/msm_thermal.h> |
| #include <linux/i2c/atmel_mxt_ts.h> |
| #include <linux/cyttsp-qc.h> |
| #include <linux/i2c/isa1200.h> |
| #include <linux/gpio_keys.h> |
| #include <linux/epm_adc.h> |
| #include <linux/i2c/sx150x.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/hardware/gic.h> |
| #include <asm/mach/mmc.h> |
| #include <linux/platform_data/qcom_wcnss_device.h> |
| |
| #include <mach/board.h> |
| #include <mach/msm_iomap.h> |
| #include <mach/ion.h> |
| #include <linux/usb/msm_hsusb.h> |
| #include <linux/usb/android.h> |
| #include <mach/socinfo.h> |
| #include <mach/msm_spi.h> |
| #include "timer.h" |
| #include "devices.h" |
| #include <mach/gpiomux.h> |
| #include <mach/rpm.h> |
| #ifdef CONFIG_ANDROID_PMEM |
| #include <linux/android_pmem.h> |
| #endif |
| #include <mach/msm_memtypes.h> |
| #include <linux/bootmem.h> |
| #include <asm/setup.h> |
| #include <mach/dma.h> |
| #include <mach/msm_dsps.h> |
| #include <mach/msm_bus_board.h> |
| #include <mach/cpuidle.h> |
| #include <mach/mdm2.h> |
| #include <linux/msm_tsens.h> |
| #include <mach/msm_xo.h> |
| #include <mach/msm_rtb.h> |
| #include <mach/msm_serial_hs.h> |
| #include <sound/cs8427.h> |
| #include <media/gpio-ir-recv.h> |
| #include <linux/fmem.h> |
| #include <mach/msm_pcie.h> |
| #include <mach/restart.h> |
| #include <mach/msm_iomap.h> |
| |
| #include "msm_watchdog.h" |
| #include "board-8064.h" |
| #include "clock.h" |
| #include "spm.h" |
| #include <mach/mpm.h> |
| #include "rpm_resources.h" |
| #include "pm.h" |
| #include "pm-boot.h" |
| #include "devices-msm8x60.h" |
| #include "smd_private.h" |
| |
| #define MHL_GPIO_INT 30 |
| #define MHL_GPIO_RESET 35 |
| |
| #define MSM_PMEM_ADSP_SIZE 0x7800000 |
| #define MSM_PMEM_AUDIO_SIZE 0x4CF000 |
| #ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY |
| #define MSM_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| #else |
| #define MSM_PMEM_SIZE 0x4000000 /* 64 Mbytes */ |
| #endif |
| |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| #define HOLE_SIZE 0x20000 |
| #define MSM_CONTIG_MEM_SIZE 0x65000 |
| #ifdef CONFIG_MSM_IOMMU |
| #define MSM_ION_MM_SIZE 0x3800000 |
| #define MSM_ION_SF_SIZE 0 |
| #define MSM_ION_QSECOM_SIZE 0x780000 /* (7.5MB) */ |
| #define MSM_ION_HEAP_NUM 7 |
| #else |
| #define MSM_ION_MM_SIZE MSM_PMEM_ADSP_SIZE |
| #define MSM_ION_SF_SIZE MSM_PMEM_SIZE |
| #define MSM_ION_QSECOM_SIZE 0x600000 /* (6MB) */ |
| #define MSM_ION_HEAP_NUM 8 |
| #endif |
| #define MSM_ION_MM_FW_SIZE (0x200000 - HOLE_SIZE) /* (2MB - 128KB) */ |
| #define MSM_ION_MFC_SIZE SZ_8K |
| #define MSM_ION_AUDIO_SIZE MSM_PMEM_AUDIO_SIZE |
| #else |
| #define MSM_CONTIG_MEM_SIZE 0x110C000 |
| #define MSM_ION_HEAP_NUM 1 |
| #endif |
| |
| #define APQ8064_FIXED_AREA_START (0xa0000000 - (MSM_ION_MM_FW_SIZE + \ |
| HOLE_SIZE)) |
| #define MAX_FIXED_AREA_SIZE 0x10000000 |
| #define MSM_MM_FW_SIZE (0x200000 - HOLE_SIZE) |
| #define APQ8064_FW_START APQ8064_FIXED_AREA_START |
| |
| #define QFPROM_RAW_FEAT_CONFIG_ROW0_MSB (MSM_QFPROM_BASE + 0x23c) |
| #define QFPROM_RAW_OEM_CONFIG_ROW0_LSB (MSM_QFPROM_BASE + 0x220) |
| |
| /* PCIE AXI address space */ |
| #define PCIE_AXI_BAR_PHYS 0x08000000 |
| #define PCIE_AXI_BAR_SIZE SZ_128M |
| |
| /* PCIe pmic gpios */ |
| #define PCIE_WAKE_N_PMIC_GPIO 12 |
| #define PCIE_PWR_EN_PMIC_GPIO 13 |
| #define PCIE_RST_N_PMIC_MPP 1 |
| |
| #ifdef CONFIG_KERNEL_MSM_CONTIG_MEM_REGION |
| static unsigned msm_contig_mem_size = MSM_CONTIG_MEM_SIZE; |
| static int __init msm_contig_mem_size_setup(char *p) |
| { |
| msm_contig_mem_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("msm_contig_mem_size", msm_contig_mem_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| static unsigned pmem_size = MSM_PMEM_SIZE; |
| static int __init pmem_size_setup(char *p) |
| { |
| pmem_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_size", pmem_size_setup); |
| |
| static unsigned pmem_adsp_size = MSM_PMEM_ADSP_SIZE; |
| |
| static int __init pmem_adsp_size_setup(char *p) |
| { |
| pmem_adsp_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_adsp_size", pmem_adsp_size_setup); |
| |
| static unsigned pmem_audio_size = MSM_PMEM_AUDIO_SIZE; |
| |
| static int __init pmem_audio_size_setup(char *p) |
| { |
| pmem_audio_size = memparse(p, NULL); |
| return 0; |
| } |
| early_param("pmem_audio_size", pmem_audio_size_setup); |
| #endif |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct android_pmem_platform_data android_pmem_pdata = { |
| .name = "pmem", |
| .allocator_type = PMEM_ALLOCATORTYPE_ALLORNOTHING, |
| .cached = 1, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device apq8064_android_pmem_device = { |
| .name = "android_pmem", |
| .id = 0, |
| .dev = {.platform_data = &android_pmem_pdata}, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_adsp_pdata = { |
| .name = "pmem_adsp", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| static struct platform_device apq8064_android_pmem_adsp_device = { |
| .name = "android_pmem", |
| .id = 2, |
| .dev = { .platform_data = &android_pmem_adsp_pdata }, |
| }; |
| |
| static struct android_pmem_platform_data android_pmem_audio_pdata = { |
| .name = "pmem_audio", |
| .allocator_type = PMEM_ALLOCATORTYPE_BITMAP, |
| .cached = 0, |
| .memory_type = MEMTYPE_EBI1, |
| }; |
| |
| static struct platform_device apq8064_android_pmem_audio_device = { |
| .name = "android_pmem", |
| .id = 4, |
| .dev = { .platform_data = &android_pmem_audio_pdata }, |
| }; |
| #endif /* CONFIG_MSM_MULTIMEDIA_USE_ION */ |
| #endif /* CONFIG_ANDROID_PMEM */ |
| |
| #ifdef CONFIG_BATTERY_BCL |
| static struct platform_device battery_bcl_device = { |
| .name = "battery_current_limit", |
| .id = -1, |
| }; |
| #endif |
| |
| struct fmem_platform_data apq8064_fmem_pdata = { |
| }; |
| |
| static struct memtype_reserve apq8064_reserve_table[] __initdata = { |
| [MEMTYPE_SMI] = { |
| }, |
| [MEMTYPE_EBI0] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| [MEMTYPE_EBI1] = { |
| .flags = MEMTYPE_FLAGS_1M_ALIGN, |
| }, |
| }; |
| |
| static void __init reserve_rtb_memory(void) |
| { |
| #if defined(CONFIG_MSM_RTB) |
| apq8064_reserve_table[MEMTYPE_EBI1].size += apq8064_rtb_pdata.size; |
| #endif |
| } |
| |
| |
| static void __init size_pmem_devices(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| android_pmem_adsp_pdata.size = pmem_adsp_size; |
| android_pmem_pdata.size = pmem_size; |
| android_pmem_audio_pdata.size = MSM_PMEM_AUDIO_SIZE; |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| } |
| |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static void __init reserve_memory_for(struct android_pmem_platform_data *p) |
| { |
| apq8064_reserve_table[p->memory_type].size += p->size; |
| } |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| |
| static void __init reserve_pmem_memory(void) |
| { |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| reserve_memory_for(&android_pmem_adsp_pdata); |
| reserve_memory_for(&android_pmem_pdata); |
| reserve_memory_for(&android_pmem_audio_pdata); |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| apq8064_reserve_table[MEMTYPE_EBI1].size += msm_contig_mem_size; |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| } |
| |
| static int apq8064_paddr_to_memtype(unsigned int paddr) |
| { |
| return MEMTYPE_EBI1; |
| } |
| |
| #define FMEM_ENABLED 0 |
| |
| #ifdef CONFIG_ION_MSM |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| static struct ion_cp_heap_pdata cp_mm_apq8064_ion_pdata = { |
| .permission_type = IPT_TYPE_MM_CARVEOUT, |
| .align = PAGE_SIZE, |
| .reusable = FMEM_ENABLED, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_MIDDLE, |
| }; |
| |
| static struct ion_cp_heap_pdata cp_mfc_apq8064_ion_pdata = { |
| .permission_type = IPT_TYPE_MFC_SHAREDMEM, |
| .align = PAGE_SIZE, |
| .reusable = 0, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_HIGH, |
| }; |
| |
| static struct ion_co_heap_pdata co_apq8064_ion_pdata = { |
| .adjacent_mem_id = INVALID_HEAP_ID, |
| .align = PAGE_SIZE, |
| .mem_is_fmem = 0, |
| }; |
| |
| static struct ion_co_heap_pdata fw_co_apq8064_ion_pdata = { |
| .adjacent_mem_id = ION_CP_MM_HEAP_ID, |
| .align = SZ_128K, |
| .mem_is_fmem = FMEM_ENABLED, |
| .fixed_position = FIXED_LOW, |
| }; |
| #endif |
| |
| /** |
| * These heaps are listed in the order they will be allocated. Due to |
| * video hardware restrictions and content protection the FW heap has to |
| * be allocated adjacent (below) the MM heap and the MFC heap has to be |
| * allocated after the MM heap to ensure MFC heap is not more than 256MB |
| * away from the base address of the FW heap. |
| * However, the order of FW heap and MM heap doesn't matter since these |
| * two heaps are taken care of by separate code to ensure they are adjacent |
| * to each other. |
| * Don't swap the order unless you know what you are doing! |
| */ |
| static struct ion_platform_data apq8064_ion_pdata = { |
| .nr = MSM_ION_HEAP_NUM, |
| .heaps = { |
| { |
| .id = ION_SYSTEM_HEAP_ID, |
| .type = ION_HEAP_TYPE_SYSTEM, |
| .name = ION_VMALLOC_HEAP_NAME, |
| }, |
| #ifdef CONFIG_MSM_MULTIMEDIA_USE_ION |
| { |
| .id = ION_CP_MM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MM_HEAP_NAME, |
| .size = MSM_ION_MM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mm_apq8064_ion_pdata, |
| }, |
| { |
| .id = ION_MM_FIRMWARE_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_MM_FIRMWARE_HEAP_NAME, |
| .size = MSM_ION_MM_FW_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &fw_co_apq8064_ion_pdata, |
| }, |
| { |
| .id = ION_CP_MFC_HEAP_ID, |
| .type = ION_HEAP_TYPE_CP, |
| .name = ION_MFC_HEAP_NAME, |
| .size = MSM_ION_MFC_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &cp_mfc_apq8064_ion_pdata, |
| }, |
| #ifndef CONFIG_MSM_IOMMU |
| { |
| .id = ION_SF_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_SF_HEAP_NAME, |
| .size = MSM_ION_SF_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_apq8064_ion_pdata, |
| }, |
| #endif |
| { |
| .id = ION_IOMMU_HEAP_ID, |
| .type = ION_HEAP_TYPE_IOMMU, |
| .name = ION_IOMMU_HEAP_NAME, |
| }, |
| { |
| .id = ION_QSECOM_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_QSECOM_HEAP_NAME, |
| .size = MSM_ION_QSECOM_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_apq8064_ion_pdata, |
| }, |
| { |
| .id = ION_AUDIO_HEAP_ID, |
| .type = ION_HEAP_TYPE_CARVEOUT, |
| .name = ION_AUDIO_HEAP_NAME, |
| .size = MSM_ION_AUDIO_SIZE, |
| .memory_type = ION_EBI_TYPE, |
| .extra_data = (void *) &co_apq8064_ion_pdata, |
| }, |
| #endif |
| } |
| }; |
| |
| static struct platform_device apq8064_ion_dev = { |
| .name = "ion-msm", |
| .id = 1, |
| .dev = { .platform_data = &apq8064_ion_pdata }, |
| }; |
| #endif |
| |
| static struct platform_device apq8064_fmem_device = { |
| .name = "fmem", |
| .id = 1, |
| .dev = { .platform_data = &apq8064_fmem_pdata }, |
| }; |
| |
| static void __init reserve_mem_for_ion(enum ion_memory_types mem_type, |
| unsigned long size) |
| { |
| apq8064_reserve_table[mem_type].size += size; |
| } |
| |
| static void __init apq8064_reserve_fixed_area(unsigned long fixed_area_size) |
| { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| int ret; |
| |
| if (fixed_area_size > MAX_FIXED_AREA_SIZE) |
| panic("fixed area size is larger than %dM\n", |
| MAX_FIXED_AREA_SIZE >> 20); |
| |
| reserve_info->fixed_area_size = fixed_area_size; |
| reserve_info->fixed_area_start = APQ8064_FW_START; |
| |
| ret = memblock_remove(reserve_info->fixed_area_start, |
| reserve_info->fixed_area_size); |
| BUG_ON(ret); |
| #endif |
| } |
| |
| /** |
| * Reserve memory for ION and calculate amount of reusable memory for fmem. |
| * We only reserve memory for heaps that are not reusable. However, we only |
| * support one reusable heap at the moment so we ignore the reusable flag for |
| * other than the first heap with reusable flag set. Also handle special case |
| * for video heaps (MM,FW, and MFC). Video requires heaps MM and MFC to be |
| * at a higher address than FW in addition to not more than 256MB away from the |
| * base address of the firmware. This means that if MM is reusable the other |
| * two heaps must be allocated in the same region as FW. This is handled by the |
| * mem_is_fmem flag in the platform data. In addition the MM heap must be |
| * adjacent to the FW heap for content protection purposes. |
| */ |
| static void __init reserve_ion_memory(void) |
| { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| unsigned int i; |
| unsigned int reusable_count = 0; |
| unsigned int fixed_size = 0; |
| unsigned int fixed_low_size, fixed_middle_size, fixed_high_size; |
| unsigned long fixed_low_start, fixed_middle_start, fixed_high_start; |
| |
| apq8064_fmem_pdata.size = 0; |
| apq8064_fmem_pdata.reserved_size_low = 0; |
| apq8064_fmem_pdata.reserved_size_high = 0; |
| apq8064_fmem_pdata.align = PAGE_SIZE; |
| fixed_low_size = 0; |
| fixed_middle_size = 0; |
| fixed_high_size = 0; |
| |
| /* We only support 1 reusable heap. Check if more than one heap |
| * is specified as reusable and set as non-reusable if found. |
| */ |
| for (i = 0; i < apq8064_ion_pdata.nr; ++i) { |
| const struct ion_platform_heap *heap = |
| &(apq8064_ion_pdata.heaps[i]); |
| |
| if (heap->type == (enum ion_heap_type) ION_HEAP_TYPE_CP |
| && heap->extra_data) { |
| struct ion_cp_heap_pdata *data = heap->extra_data; |
| |
| reusable_count += (data->reusable) ? 1 : 0; |
| |
| if (data->reusable && reusable_count > 1) { |
| pr_err("%s: Too many heaps specified as " |
| "reusable. Heap %s was not configured " |
| "as reusable.\n", __func__, heap->name); |
| data->reusable = 0; |
| } |
| } |
| } |
| |
| for (i = 0; i < apq8064_ion_pdata.nr; ++i) { |
| const struct ion_platform_heap *heap = |
| &(apq8064_ion_pdata.heaps[i]); |
| |
| if (heap->extra_data) { |
| int fixed_position = NOT_FIXED; |
| int mem_is_fmem = 0; |
| |
| switch ((int)heap->type) { |
| case ION_HEAP_TYPE_CP: |
| mem_is_fmem = ((struct ion_cp_heap_pdata *) |
| heap->extra_data)->mem_is_fmem; |
| fixed_position = ((struct ion_cp_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| case ION_HEAP_TYPE_CARVEOUT: |
| mem_is_fmem = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->mem_is_fmem; |
| fixed_position = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| default: |
| break; |
| } |
| |
| if (fixed_position != NOT_FIXED) |
| fixed_size += heap->size; |
| else |
| reserve_mem_for_ion(MEMTYPE_EBI1, heap->size); |
| |
| if (fixed_position == FIXED_LOW) |
| fixed_low_size += heap->size; |
| else if (fixed_position == FIXED_MIDDLE) |
| fixed_middle_size += heap->size; |
| else if (fixed_position == FIXED_HIGH) |
| fixed_high_size += heap->size; |
| |
| if (mem_is_fmem) |
| apq8064_fmem_pdata.size += heap->size; |
| } |
| } |
| |
| if (!fixed_size) |
| return; |
| |
| if (apq8064_fmem_pdata.size) { |
| apq8064_fmem_pdata.reserved_size_low = fixed_low_size + |
| HOLE_SIZE; |
| apq8064_fmem_pdata.reserved_size_high = fixed_high_size; |
| } |
| |
| /* Since the fixed area may be carved out of lowmem, |
| * make sure the length is a multiple of 1M. |
| */ |
| fixed_size = (fixed_size + HOLE_SIZE + SECTION_SIZE - 1) |
| & SECTION_MASK; |
| apq8064_reserve_fixed_area(fixed_size); |
| |
| fixed_low_start = APQ8064_FIXED_AREA_START; |
| fixed_middle_start = fixed_low_start + fixed_low_size + HOLE_SIZE; |
| fixed_high_start = fixed_middle_start + fixed_middle_size; |
| |
| for (i = 0; i < apq8064_ion_pdata.nr; ++i) { |
| struct ion_platform_heap *heap = &(apq8064_ion_pdata.heaps[i]); |
| |
| if (heap->extra_data) { |
| int fixed_position = NOT_FIXED; |
| struct ion_cp_heap_pdata *pdata = NULL; |
| |
| switch ((int) heap->type) { |
| case ION_HEAP_TYPE_CP: |
| pdata = |
| (struct ion_cp_heap_pdata *)heap->extra_data; |
| fixed_position = pdata->fixed_position; |
| break; |
| case ION_HEAP_TYPE_CARVEOUT: |
| fixed_position = ((struct ion_co_heap_pdata *) |
| heap->extra_data)->fixed_position; |
| break; |
| default: |
| break; |
| } |
| |
| switch (fixed_position) { |
| case FIXED_LOW: |
| heap->base = fixed_low_start; |
| break; |
| case FIXED_MIDDLE: |
| heap->base = fixed_middle_start; |
| pdata->secure_base = fixed_middle_start |
| - HOLE_SIZE; |
| pdata->secure_size = HOLE_SIZE + heap->size; |
| break; |
| case FIXED_HIGH: |
| heap->base = fixed_high_start; |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| #endif |
| } |
| |
| static void __init reserve_mdp_memory(void) |
| { |
| apq8064_mdp_writeback(apq8064_reserve_table); |
| } |
| |
| static void __init reserve_cache_dump_memory(void) |
| { |
| #ifdef CONFIG_MSM_CACHE_DUMP |
| unsigned int total; |
| |
| total = apq8064_cache_dump_pdata.l1_size + |
| apq8064_cache_dump_pdata.l2_size; |
| apq8064_reserve_table[MEMTYPE_EBI1].size += total; |
| #endif |
| } |
| |
| static void __init reserve_mpdcvs_memory(void) |
| { |
| apq8064_reserve_table[MEMTYPE_EBI1].size += SZ_32K; |
| } |
| |
| static void __init apq8064_calculate_reserve_sizes(void) |
| { |
| size_pmem_devices(); |
| reserve_pmem_memory(); |
| reserve_ion_memory(); |
| reserve_mdp_memory(); |
| reserve_rtb_memory(); |
| reserve_cache_dump_memory(); |
| reserve_mpdcvs_memory(); |
| } |
| |
| static struct reserve_info apq8064_reserve_info __initdata = { |
| .memtype_reserve_table = apq8064_reserve_table, |
| .calculate_reserve_sizes = apq8064_calculate_reserve_sizes, |
| .reserve_fixed_area = apq8064_reserve_fixed_area, |
| .paddr_to_memtype = apq8064_paddr_to_memtype, |
| }; |
| |
| static int apq8064_memory_bank_size(void) |
| { |
| return 1<<29; |
| } |
| |
| static void __init locate_unstable_memory(void) |
| { |
| struct membank *mb = &meminfo.bank[meminfo.nr_banks - 1]; |
| unsigned long bank_size; |
| unsigned long low, high; |
| |
| bank_size = apq8064_memory_bank_size(); |
| low = meminfo.bank[0].start; |
| high = mb->start + mb->size; |
| |
| /* Check if 32 bit overflow occured */ |
| if (high < mb->start) |
| high = -PAGE_SIZE; |
| |
| low &= ~(bank_size - 1); |
| |
| if (high - low <= bank_size) |
| goto no_dmm; |
| |
| #ifdef CONFIG_ENABLE_DMM |
| apq8064_reserve_info.low_unstable_address = mb->start - |
| MIN_MEMORY_BLOCK_SIZE + mb->size; |
| apq8064_reserve_info.max_unstable_size = MIN_MEMORY_BLOCK_SIZE; |
| |
| apq8064_reserve_info.bank_size = bank_size; |
| pr_info("low unstable address %lx max size %lx bank size %lx\n", |
| apq8064_reserve_info.low_unstable_address, |
| apq8064_reserve_info.max_unstable_size, |
| apq8064_reserve_info.bank_size); |
| return; |
| #endif |
| no_dmm: |
| apq8064_reserve_info.low_unstable_address = high; |
| apq8064_reserve_info.max_unstable_size = 0; |
| } |
| |
| static int apq8064_change_memory_power(u64 start, u64 size, |
| int change_type) |
| { |
| return soc_change_memory_power(start, size, change_type); |
| } |
| |
| static char prim_panel_name[PANEL_NAME_MAX_LEN]; |
| static char ext_panel_name[PANEL_NAME_MAX_LEN]; |
| |
| static int ext_resolution; |
| |
| static int __init prim_display_setup(char *param) |
| { |
| if (strnlen(param, PANEL_NAME_MAX_LEN)) |
| strlcpy(prim_panel_name, param, PANEL_NAME_MAX_LEN); |
| return 0; |
| } |
| early_param("prim_display", prim_display_setup); |
| |
| static int __init ext_display_setup(char *param) |
| { |
| if (strnlen(param, PANEL_NAME_MAX_LEN)) |
| strlcpy(ext_panel_name, param, PANEL_NAME_MAX_LEN); |
| return 0; |
| } |
| early_param("ext_display", ext_display_setup); |
| |
| static int __init hdmi_resulution_setup(char *param) |
| { |
| int ret; |
| ret = kstrtoint(param, 10, &ext_resolution); |
| return ret; |
| } |
| early_param("ext_resolution", hdmi_resulution_setup); |
| |
| static void __init apq8064_reserve(void) |
| { |
| apq8064_set_display_params(prim_panel_name, ext_panel_name, |
| ext_resolution); |
| msm_reserve(); |
| if (apq8064_fmem_pdata.size) { |
| #if defined(CONFIG_ION_MSM) && defined(CONFIG_MSM_MULTIMEDIA_USE_ION) |
| if (reserve_info->fixed_area_size) { |
| apq8064_fmem_pdata.phys = |
| reserve_info->fixed_area_start + MSM_MM_FW_SIZE; |
| pr_info("mm fw at %lx (fixed) size %x\n", |
| reserve_info->fixed_area_start, MSM_MM_FW_SIZE); |
| pr_info("fmem start %lx (fixed) size %lx\n", |
| apq8064_fmem_pdata.phys, |
| apq8064_fmem_pdata.size); |
| } |
| #endif |
| } |
| } |
| |
| static void __init place_movable_zone(void) |
| { |
| #ifdef CONFIG_ENABLE_DMM |
| movable_reserved_start = apq8064_reserve_info.low_unstable_address; |
| movable_reserved_size = apq8064_reserve_info.max_unstable_size; |
| pr_info("movable zone start %lx size %lx\n", |
| movable_reserved_start, movable_reserved_size); |
| #endif |
| } |
| |
| static void __init apq8064_early_reserve(void) |
| { |
| reserve_info = &apq8064_reserve_info; |
| locate_unstable_memory(); |
| place_movable_zone(); |
| |
| } |
| #ifdef CONFIG_USB_EHCI_MSM_HSIC |
| /* Bandwidth requests (zero) if no vote placed */ |
| static struct msm_bus_vectors hsic_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_SPS, |
| .ab = 0, |
| .ib = 0, |
| }, |
| }; |
| |
| /* Bus bandwidth requests in Bytes/sec */ |
| static struct msm_bus_vectors hsic_max_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 60000000, /* At least 480Mbps on bus. */ |
| .ib = 960000000, /* MAX bursts rate */ |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_SPS, |
| .ab = 0, |
| .ib = 512000000, /*vote for 64Mhz dfab clk rate*/ |
| }, |
| }; |
| |
| static struct msm_bus_paths hsic_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(hsic_init_vectors), |
| hsic_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(hsic_max_vectors), |
| hsic_max_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata hsic_bus_scale_pdata = { |
| hsic_bus_scale_usecases, |
| ARRAY_SIZE(hsic_bus_scale_usecases), |
| .name = "hsic", |
| }; |
| |
| static struct msm_hsic_host_platform_data msm_hsic_pdata = { |
| .strobe = 88, |
| .data = 89, |
| .bus_scale_table = &hsic_bus_scale_pdata, |
| }; |
| #else |
| static struct msm_hsic_host_platform_data msm_hsic_pdata; |
| #endif |
| |
| #define PID_MAGIC_ID 0x71432909 |
| #define SERIAL_NUM_MAGIC_ID 0x61945374 |
| #define SERIAL_NUMBER_LENGTH 127 |
| #define DLOAD_USB_BASE_ADD 0x2A03F0C8 |
| |
| struct magic_num_struct { |
| uint32_t pid; |
| uint32_t serial_num; |
| }; |
| |
| struct dload_struct { |
| uint32_t reserved1; |
| uint32_t reserved2; |
| uint32_t reserved3; |
| uint16_t reserved4; |
| uint16_t pid; |
| char serial_number[SERIAL_NUMBER_LENGTH]; |
| uint16_t reserved5; |
| struct magic_num_struct magic_struct; |
| }; |
| |
| static int usb_diag_update_pid_and_serial_num(uint32_t pid, const char *snum) |
| { |
| struct dload_struct __iomem *dload = 0; |
| |
| dload = ioremap(DLOAD_USB_BASE_ADD, sizeof(*dload)); |
| if (!dload) { |
| pr_err("%s: cannot remap I/O memory region: %08x\n", |
| __func__, DLOAD_USB_BASE_ADD); |
| return -ENXIO; |
| } |
| |
| pr_debug("%s: dload:%p pid:%x serial_num:%s\n", |
| __func__, dload, pid, snum); |
| /* update pid */ |
| dload->magic_struct.pid = PID_MAGIC_ID; |
| dload->pid = pid; |
| |
| /* update serial number */ |
| dload->magic_struct.serial_num = 0; |
| if (!snum) { |
| memset(dload->serial_number, 0, SERIAL_NUMBER_LENGTH); |
| goto out; |
| } |
| |
| dload->magic_struct.serial_num = SERIAL_NUM_MAGIC_ID; |
| strlcpy(dload->serial_number, snum, SERIAL_NUMBER_LENGTH); |
| out: |
| iounmap(dload); |
| return 0; |
| } |
| |
| static struct android_usb_platform_data android_usb_pdata = { |
| .update_pid_and_serial_num = usb_diag_update_pid_and_serial_num, |
| }; |
| |
| static struct platform_device android_usb_device = { |
| .name = "android_usb", |
| .id = -1, |
| .dev = { |
| .platform_data = &android_usb_pdata, |
| }, |
| }; |
| |
| /* Bandwidth requests (zero) if no vote placed */ |
| static struct msm_bus_vectors usb_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| }; |
| |
| /* Bus bandwidth requests in Bytes/sec */ |
| static struct msm_bus_vectors usb_max_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_SPS, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 60000000, /* At least 480Mbps on bus. */ |
| .ib = 960000000, /* MAX bursts rate */ |
| }, |
| }; |
| |
| static struct msm_bus_paths usb_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(usb_init_vectors), |
| usb_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(usb_max_vectors), |
| usb_max_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata usb_bus_scale_pdata = { |
| usb_bus_scale_usecases, |
| ARRAY_SIZE(usb_bus_scale_usecases), |
| .name = "usb", |
| }; |
| |
| static int phy_init_seq[] = { |
| 0x68, 0x81, /* update DC voltage level */ |
| 0x24, 0x82, /* set pre-emphasis and rise/fall time */ |
| -1 |
| }; |
| |
| #define PMIC_GPIO_DP 27 /* PMIC GPIO for D+ change */ |
| #define PMIC_GPIO_DP_IRQ PM8921_GPIO_IRQ(PM8921_IRQ_BASE, PMIC_GPIO_DP) |
| #define MSM_MPM_PIN_USB1_OTGSESSVLD 40 |
| |
| static struct msm_otg_platform_data msm_otg_pdata = { |
| .mode = USB_OTG, |
| .otg_control = OTG_PMIC_CONTROL, |
| .phy_type = SNPS_28NM_INTEGRATED_PHY, |
| .pmic_id_irq = PM8921_USB_ID_IN_IRQ(PM8921_IRQ_BASE), |
| .power_budget = 750, |
| .bus_scale_table = &usb_bus_scale_pdata, |
| .phy_init_seq = phy_init_seq, |
| .mpm_otgsessvld_int = MSM_MPM_PIN_USB1_OTGSESSVLD, |
| }; |
| |
| static struct msm_usb_host_platform_data msm_ehci_host_pdata3 = { |
| .power_budget = 500, |
| }; |
| |
| #ifdef CONFIG_USB_EHCI_MSM_HOST4 |
| static struct msm_usb_host_platform_data msm_ehci_host_pdata4; |
| #endif |
| |
| static void __init apq8064_ehci_host_init(void) |
| { |
| if (machine_is_apq8064_liquid() || machine_is_mpq8064_cdp() || |
| machine_is_mpq8064_hrd() || machine_is_mpq8064_dtv() || |
| machine_is_apq8064_cdp()) { |
| if (machine_is_apq8064_liquid()) |
| msm_ehci_host_pdata3.dock_connect_irq = |
| PM8921_MPP_IRQ(PM8921_IRQ_BASE, 9); |
| else |
| msm_ehci_host_pdata3.pmic_gpio_dp_irq = |
| PMIC_GPIO_DP_IRQ; |
| |
| apq8064_device_ehci_host3.dev.platform_data = |
| &msm_ehci_host_pdata3; |
| platform_device_register(&apq8064_device_ehci_host3); |
| |
| #ifdef CONFIG_USB_EHCI_MSM_HOST4 |
| apq8064_device_ehci_host4.dev.platform_data = |
| &msm_ehci_host_pdata4; |
| platform_device_register(&apq8064_device_ehci_host4); |
| #endif |
| } |
| } |
| |
| static struct smb349_platform_data smb349_data __initdata = { |
| .en_n_gpio = PM8921_GPIO_PM_TO_SYS(37), |
| .chg_susp_gpio = PM8921_GPIO_PM_TO_SYS(30), |
| .chg_current_ma = 2200, |
| }; |
| |
| static struct i2c_board_info smb349_charger_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO(SMB349_NAME, 0x1B), |
| .platform_data = &smb349_data, |
| }, |
| }; |
| |
| struct sx150x_platform_data apq8064_sx150x_data[] = { |
| [SX150X_EPM] = { |
| .gpio_base = GPIO_EPM_EXPANDER_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0x0, |
| .io_open_drain_ena = 0x0, |
| .io_polarity = 0, |
| .irq_summary = -1, |
| }, |
| }; |
| |
| static struct epm_chan_properties ads_adc_channel_data[] = { |
| {10, 100}, {1000, 1}, {10, 100}, {1000, 1}, |
| {10, 100}, {1000, 1}, {10, 100}, {1000, 1}, |
| {10, 100}, {20, 100}, {500, 100}, {5, 100}, |
| {1000, 1}, {200, 100}, {50, 100}, {10, 100}, |
| {510, 100}, {50, 100}, {20, 100}, {100, 100}, |
| {510, 100}, {20, 100}, {50, 100}, {200, 100}, |
| {10, 100}, {20, 100}, {1000, 1}, {10, 100}, |
| {200, 100}, {510, 100}, {1000, 100}, {200, 100}, |
| }; |
| |
| static struct epm_adc_platform_data epm_adc_pdata = { |
| .channel = ads_adc_channel_data, |
| .bus_id = 0x0, |
| .epm_i2c_board_info = { |
| .type = "sx1509q", |
| .addr = 0x3e, |
| .platform_data = &apq8064_sx150x_data[SX150X_EPM], |
| }, |
| .gpio_expander_base_addr = GPIO_EPM_EXPANDER_BASE, |
| }; |
| |
| static struct platform_device epm_adc_device = { |
| .name = "epm_adc", |
| .id = -1, |
| .dev = { |
| .platform_data = &epm_adc_pdata, |
| }, |
| }; |
| |
| static void __init apq8064_epm_adc_init(void) |
| { |
| epm_adc_pdata.num_channels = 32; |
| epm_adc_pdata.num_adc = 2; |
| epm_adc_pdata.chan_per_adc = 16; |
| epm_adc_pdata.chan_per_mux = 8; |
| }; |
| |
| /* Micbias setting is based on 8660 CDP/MTP/FLUID requirement |
| * 4 micbiases are used to power various analog and digital |
| * microphones operating at 1800 mV. Technically, all micbiases |
| * can source from single cfilter since all microphones operate |
| * at the same voltage level. The arrangement below is to make |
| * sure all cfilters are exercised. LDO_H regulator ouput level |
| * does not need to be as high as 2.85V. It is choosen for |
| * microphone sensitivity purpose. |
| */ |
| static struct wcd9xxx_pdata apq8064_tabla_platform_data = { |
| .slimbus_slave_device = { |
| .name = "tabla-slave", |
| .e_addr = {0, 0, 0x10, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(42), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_WCD9XXX_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 2700, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| }, |
| .regulator = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "VDDD_CDC_D", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_A_1P2V", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX, |
| }, |
| }, |
| }; |
| |
| static struct slim_device apq8064_slim_tabla = { |
| .name = "tabla-slim", |
| .e_addr = {0, 1, 0x10, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &apq8064_tabla_platform_data, |
| }, |
| }; |
| |
| static struct wcd9xxx_pdata apq8064_tabla20_platform_data = { |
| .slimbus_slave_device = { |
| .name = "tabla-slave", |
| .e_addr = {0, 0, 0x60, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(42), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_WCD9XXX_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 2700, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| }, |
| .regulator = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "VDDD_CDC_D", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_A_1P2V", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX, |
| }, |
| }, |
| }; |
| |
| static struct slim_device apq8064_slim_tabla20 = { |
| .name = "tabla2x-slim", |
| .e_addr = {0, 1, 0x60, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &apq8064_tabla20_platform_data, |
| }, |
| }; |
| |
| static struct wcd9xxx_pdata apq8064_tabla_i2c_platform_data = { |
| .irq = MSM_GPIO_TO_INT(77), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_WCD9XXX_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 1800, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| }, |
| .regulator = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "VDDD_CDC_D", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_A_1P2V", |
| .min_uV = 1225000, |
| .max_uV = 1250000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX, |
| }, |
| }, |
| }; |
| |
| static struct i2c_board_info apq8064_tabla_i2c_device_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("tabla top level", |
| APQ_8064_TABLA_I2C_SLAVE_ADDR), |
| .platform_data = &apq8064_tabla_i2c_platform_data, |
| }, |
| { |
| I2C_BOARD_INFO("tabla analog", |
| APQ_8064_TABLA_ANALOG_I2C_SLAVE_ADDR), |
| .platform_data = &apq8064_tabla_i2c_platform_data, |
| }, |
| { |
| I2C_BOARD_INFO("tabla digital1", |
| APQ_8064_TABLA_DIGITAL1_I2C_SLAVE_ADDR), |
| .platform_data = &apq8064_tabla_i2c_platform_data, |
| }, |
| { |
| I2C_BOARD_INFO("tabla digital2", |
| APQ_8064_TABLA_DIGITAL2_I2C_SLAVE_ADDR), |
| .platform_data = &apq8064_tabla_i2c_platform_data, |
| }, |
| }; |
| |
| static struct wcd9xxx_pdata mpq8064_ashiko20_platform_data = { |
| .slimbus_slave_device = { |
| .name = "tabla-slave", |
| .e_addr = {0, 0, 0x60, 0, 0x17, 2}, |
| }, |
| .irq = MSM_GPIO_TO_INT(42), |
| .irq_base = TABLA_INTERRUPT_BASE, |
| .num_irqs = NR_WCD9XXX_IRQS, |
| .reset_gpio = PM8921_GPIO_PM_TO_SYS(34), |
| .micbias = { |
| .ldoh_v = TABLA_LDOH_2P85_V, |
| .cfilt1_mv = 1800, |
| .cfilt2_mv = 1800, |
| .cfilt3_mv = 1800, |
| .bias1_cfilt_sel = TABLA_CFILT1_SEL, |
| .bias2_cfilt_sel = TABLA_CFILT2_SEL, |
| .bias3_cfilt_sel = TABLA_CFILT3_SEL, |
| .bias4_cfilt_sel = TABLA_CFILT3_SEL, |
| }, |
| .regulator = { |
| { |
| .name = "CDC_VDD_CP", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_CP_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_RX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_RX_CUR_MAX, |
| }, |
| { |
| .name = "CDC_VDDA_TX", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_CDC_VDDA_TX_CUR_MAX, |
| }, |
| { |
| .name = "VDDIO_CDC", |
| .min_uV = 1800000, |
| .max_uV = 1800000, |
| .optimum_uA = WCD9XXX_VDDIO_CDC_CUR_MAX, |
| }, |
| { |
| .name = "HRD_VDDD_CDC_D", |
| .min_uV = 1200000, |
| .max_uV = 1200000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_D_CUR_MAX, |
| }, |
| { |
| .name = "HRD_CDC_VDDA_A_1P2V", |
| .min_uV = 1200000, |
| .max_uV = 1200000, |
| .optimum_uA = WCD9XXX_VDDD_CDC_A_CUR_MAX, |
| }, |
| }, |
| }; |
| |
| static struct slim_device mpq8064_slim_ashiko20 = { |
| .name = "tabla2x-slim", |
| .e_addr = {0, 1, 0x60, 0, 0x17, 2}, |
| .dev = { |
| .platform_data = &mpq8064_ashiko20_platform_data, |
| }, |
| }; |
| |
| |
| /* enable the level shifter for cs8427 to make sure the I2C |
| * clock is running at 100KHz and voltage levels are at 3.3 |
| * and 5 volts |
| */ |
| static int enable_100KHz_ls(int enable) |
| { |
| int ret = 0; |
| if (enable) { |
| ret = gpio_request(SX150X_GPIO(1, 10), |
| "cs8427_100KHZ_ENABLE"); |
| if (ret) { |
| pr_err("%s: Failed to request gpio %d\n", __func__, |
| SX150X_GPIO(1, 10)); |
| return ret; |
| } |
| gpio_direction_output(SX150X_GPIO(1, 10), 1); |
| } else { |
| gpio_direction_output(SX150X_GPIO(1, 10), 0); |
| gpio_free(SX150X_GPIO(1, 10)); |
| } |
| return ret; |
| } |
| |
| static struct cs8427_platform_data cs8427_i2c_platform_data = { |
| .irq = SX150X_GPIO(1, 4), |
| .reset_gpio = SX150X_GPIO(1, 6), |
| .enable = enable_100KHz_ls, |
| }; |
| |
| static struct i2c_board_info cs8427_device_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("cs8427", CS8427_ADDR4), |
| .platform_data = &cs8427_i2c_platform_data, |
| }, |
| }; |
| |
| #define HAP_SHIFT_LVL_OE_GPIO PM8921_MPP_PM_TO_SYS(8) |
| #define ISA1200_HAP_EN_GPIO PM8921_GPIO_PM_TO_SYS(33) |
| #define ISA1200_HAP_LEN_GPIO PM8921_GPIO_PM_TO_SYS(20) |
| #define ISA1200_HAP_CLK_PM8921 PM8921_GPIO_PM_TO_SYS(44) |
| #define ISA1200_HAP_CLK_PM8917 PM8921_GPIO_PM_TO_SYS(38) |
| |
| static int isa1200_clk_enable(bool on) |
| { |
| unsigned int gpio = ISA1200_HAP_CLK_PM8921; |
| int rc = 0; |
| |
| if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) |
| gpio = ISA1200_HAP_CLK_PM8917; |
| |
| gpio_set_value_cansleep(gpio, on); |
| |
| if (on) { |
| rc = pm8xxx_aux_clk_control(CLK_MP3_2, XO_DIV_1, true); |
| if (rc) { |
| pr_err("%s: unable to write aux clock register(%d)\n", |
| __func__, rc); |
| goto err_gpio_dis; |
| } |
| } else { |
| rc = pm8xxx_aux_clk_control(CLK_MP3_2, XO_DIV_NONE, true); |
| if (rc) |
| pr_err("%s: unable to write aux clock register(%d)\n", |
| __func__, rc); |
| } |
| |
| return rc; |
| |
| err_gpio_dis: |
| gpio_set_value_cansleep(gpio, !on); |
| return rc; |
| } |
| |
| static int isa1200_dev_setup(bool enable) |
| { |
| unsigned int gpio = ISA1200_HAP_CLK_PM8921; |
| int rc = 0; |
| |
| if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) |
| gpio = ISA1200_HAP_CLK_PM8917; |
| |
| if (!enable) |
| goto free_gpio; |
| |
| rc = gpio_request(gpio, "haptics_clk"); |
| if (rc) { |
| pr_err("%s: unable to request gpio %d config(%d)\n", |
| __func__, gpio, rc); |
| return rc; |
| } |
| |
| rc = gpio_direction_output(gpio, 0); |
| if (rc) { |
| pr_err("%s: unable to set direction\n", __func__); |
| goto free_gpio; |
| } |
| |
| return 0; |
| |
| free_gpio: |
| gpio_free(gpio); |
| return rc; |
| } |
| |
| static struct isa1200_regulator isa1200_reg_data[] = { |
| { |
| .name = "vddp", |
| .min_uV = ISA_I2C_VTG_MIN_UV, |
| .max_uV = ISA_I2C_VTG_MAX_UV, |
| .load_uA = ISA_I2C_CURR_UA, |
| }, |
| }; |
| |
| static struct isa1200_platform_data isa1200_1_pdata = { |
| .name = "vibrator", |
| .dev_setup = isa1200_dev_setup, |
| .clk_enable = isa1200_clk_enable, |
| .need_pwm_clk = true, |
| .hap_en_gpio = ISA1200_HAP_EN_GPIO, |
| .hap_len_gpio = ISA1200_HAP_LEN_GPIO, |
| .max_timeout = 15000, |
| .mode_ctrl = PWM_GEN_MODE, |
| .pwm_fd = { |
| .pwm_div = 256, |
| }, |
| .is_erm = false, |
| .smart_en = true, |
| .ext_clk_en = true, |
| .chip_en = 1, |
| .regulator_info = isa1200_reg_data, |
| .num_regulators = ARRAY_SIZE(isa1200_reg_data), |
| }; |
| |
| static struct i2c_board_info isa1200_board_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("isa1200_1", 0x90>>1), |
| .platform_data = &isa1200_1_pdata, |
| }, |
| }; |
| /* configuration data for mxt1386e using V2.1 firmware */ |
| static const u8 mxt1386e_config_data_v2_1[] = { |
| /* T6 Object */ |
| 0, 0, 0, 0, 0, 0, |
| /* T38 Object */ |
| 14, 3, 0, 5, 7, 12, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| /* T7 Object */ |
| 32, 10, 50, |
| /* T8 Object */ |
| 25, 0, 20, 20, 0, 0, 0, 0, 0, 0, |
| /* T9 Object */ |
| 139, 0, 0, 26, 42, 0, 32, 80, 2, 5, |
| 0, 5, 5, 79, 10, 30, 10, 10, 255, 2, |
| 85, 5, 0, 5, 9, 5, 12, 35, 70, 40, |
| 20, 5, 0, 0, 0, |
| /* T18 Object */ |
| 0, 0, |
| /* T24 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| /* T25 Object */ |
| 1, 0, 60, 115, 156, 99, |
| /* T27 Object */ |
| 0, 0, 0, 0, 0, 0, 0, |
| /* T40 Object */ |
| 0, 0, 0, 0, 0, |
| /* T42 Object */ |
| 0, 0, 255, 0, 255, 0, 0, 0, 0, 0, |
| /* T43 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 64, 0, 8, |
| 16, |
| /* T46 Object */ |
| 68, 0, 16, 16, 0, 0, 0, 0, 0, |
| /* T47 Object */ |
| 0, 0, 0, 0, 0, 0, 3, 64, 66, 0, |
| /* T48 Object */ |
| 1, 64, 64, 0, 0, 0, 0, 0, 0, 0, |
| 32, 40, 0, 10, 10, 0, 0, 100, 10, 90, |
| 0, 0, 0, 0, 0, 0, 0, 10, 1, 10, |
| 52, 10, 12, 0, 33, 0, 1, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, |
| /* T56 Object */ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, |
| }; |
| |
| #define MXT_TS_GPIO_IRQ 6 |
| #define MXT_TS_PWR_EN_GPIO PM8921_GPIO_PM_TO_SYS(23) |
| #define MXT_TS_RESET_GPIO 33 |
| |
| static struct mxt_config_info mxt_config_array[] = { |
| { |
| .config = mxt1386e_config_data_v2_1, |
| .config_length = ARRAY_SIZE(mxt1386e_config_data_v2_1), |
| .family_id = 0xA0, |
| .variant_id = 0x7, |
| .version = 0x21, |
| .build = 0xAA, |
| .bootldr_id = MXT_BOOTLOADER_ID_1386E, |
| .fw_name = "atmel_8064_liquid_v2_2_AA.hex", |
| }, |
| { |
| /* The config data for V2.2.AA is the same as for V2.1.AA */ |
| .config = mxt1386e_config_data_v2_1, |
| .config_length = ARRAY_SIZE(mxt1386e_config_data_v2_1), |
| .family_id = 0xA0, |
| .variant_id = 0x7, |
| .version = 0x22, |
| .build = 0xAA, |
| .bootldr_id = MXT_BOOTLOADER_ID_1386E, |
| }, |
| }; |
| |
| static struct mxt_platform_data mxt_platform_data = { |
| .config_array = mxt_config_array, |
| .config_array_size = ARRAY_SIZE(mxt_config_array), |
| .panel_minx = 0, |
| .panel_maxx = 1365, |
| .panel_miny = 0, |
| .panel_maxy = 767, |
| .disp_minx = 0, |
| .disp_maxx = 1365, |
| .disp_miny = 0, |
| .disp_maxy = 767, |
| .irqflags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| .i2c_pull_up = true, |
| .reset_gpio = MXT_TS_RESET_GPIO, |
| .irq_gpio = MXT_TS_GPIO_IRQ, |
| }; |
| |
| static struct i2c_board_info mxt_device_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("atmel_mxt_ts", 0x5b), |
| .platform_data = &mxt_platform_data, |
| .irq = MSM_GPIO_TO_INT(MXT_TS_GPIO_IRQ), |
| }, |
| }; |
| #define CYTTSP_TS_GPIO_IRQ 6 |
| #define CYTTSP_TS_GPIO_SLEEP 33 |
| #define CYTTSP_TS_GPIO_SLEEP_ALT 12 |
| |
| static ssize_t tma340_vkeys_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return snprintf(buf, 200, |
| __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":73:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":230:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":389:1120:97:97" |
| ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":544:1120:97:97" |
| "\n"); |
| } |
| |
| static struct kobj_attribute tma340_vkeys_attr = { |
| .attr = { |
| .mode = S_IRUGO, |
| }, |
| .show = &tma340_vkeys_show, |
| }; |
| |
| static struct attribute *tma340_properties_attrs[] = { |
| &tma340_vkeys_attr.attr, |
| NULL |
| }; |
| |
| static struct attribute_group tma340_properties_attr_group = { |
| .attrs = tma340_properties_attrs, |
| }; |
| |
| static int cyttsp_platform_init(struct i2c_client *client) |
| { |
| int rc = 0; |
| static struct kobject *tma340_properties_kobj; |
| |
| tma340_vkeys_attr.attr.name = "virtualkeys.cyttsp-i2c"; |
| tma340_properties_kobj = kobject_create_and_add("board_properties", |
| NULL); |
| if (tma340_properties_kobj) |
| rc = sysfs_create_group(tma340_properties_kobj, |
| &tma340_properties_attr_group); |
| if (!tma340_properties_kobj || rc) |
| pr_err("%s: failed to create board_properties\n", |
| __func__); |
| |
| return 0; |
| } |
| |
| static struct cyttsp_regulator cyttsp_regulator_data[] = { |
| { |
| .name = "vdd", |
| .min_uV = CY_TMA300_VTG_MIN_UV, |
| .max_uV = CY_TMA300_VTG_MAX_UV, |
| .hpm_load_uA = CY_TMA300_CURR_24HZ_UA, |
| .lpm_load_uA = CY_TMA300_CURR_24HZ_UA, |
| }, |
| { |
| .name = "vcc_i2c", |
| .min_uV = CY_I2C_VTG_MIN_UV, |
| .max_uV = CY_I2C_VTG_MAX_UV, |
| .hpm_load_uA = CY_I2C_CURR_UA, |
| .lpm_load_uA = CY_I2C_CURR_UA, |
| }, |
| }; |
| |
| static struct cyttsp_platform_data cyttsp_pdata = { |
| .panel_maxx = 634, |
| .panel_maxy = 1166, |
| .disp_maxx = 599, |
| .disp_maxy = 1023, |
| .disp_minx = 0, |
| .disp_miny = 0, |
| .flags = 0x01, |
| .gen = CY_GEN3, |
| .use_st = CY_USE_ST, |
| .use_mt = CY_USE_MT, |
| .use_hndshk = CY_SEND_HNDSHK, |
| .use_trk_id = CY_USE_TRACKING_ID, |
| .use_sleep = CY_USE_DEEP_SLEEP_SEL, |
| .use_gestures = CY_USE_GESTURES, |
| .fw_fname = "cyttsp_8064_mtp.hex", |
| /* change act_intrvl to customize the Active power state |
| * scanning/processing refresh interval for Operating mode |
| */ |
| .act_intrvl = CY_ACT_INTRVL_DFLT, |
| /* change tch_tmout to customize the touch timeout for the |
| * Active power state for Operating mode |
| */ |
| .tch_tmout = CY_TCH_TMOUT_DFLT, |
| /* change lp_intrvl to customize the Low Power power state |
| * scanning/processing refresh interval for Operating mode |
| */ |
| .lp_intrvl = CY_LP_INTRVL_DFLT, |
| .sleep_gpio = CYTTSP_TS_GPIO_SLEEP, |
| .resout_gpio = -1, |
| .irq_gpio = CYTTSP_TS_GPIO_IRQ, |
| .regulator_info = cyttsp_regulator_data, |
| .num_regulators = ARRAY_SIZE(cyttsp_regulator_data), |
| .init = cyttsp_platform_init, |
| .correct_fw_ver = 17, |
| }; |
| |
| static struct i2c_board_info cyttsp_info[] __initdata = { |
| { |
| I2C_BOARD_INFO(CY_I2C_NAME, 0x24), |
| .platform_data = &cyttsp_pdata, |
| .irq = MSM_GPIO_TO_INT(CYTTSP_TS_GPIO_IRQ), |
| }, |
| }; |
| |
| #define MSM_WCNSS_PHYS 0x03000000 |
| #define MSM_WCNSS_SIZE 0x280000 |
| |
| static struct resource resources_wcnss_wlan[] = { |
| { |
| .start = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .end = RIVA_APPS_WLAN_RX_DATA_AVAIL_IRQ, |
| .name = "wcnss_wlanrx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .end = RIVA_APPS_WLAN_DATA_XFER_DONE_IRQ, |
| .name = "wcnss_wlantx_irq", |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = MSM_WCNSS_PHYS, |
| .end = MSM_WCNSS_PHYS + MSM_WCNSS_SIZE - 1, |
| .name = "wcnss_mmio", |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = 64, |
| .end = 68, |
| .name = "wcnss_gpios_5wire", |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct qcom_wcnss_opts qcom_wcnss_pdata = { |
| .has_48mhz_xo = 1, |
| }; |
| |
| static struct platform_device msm_device_wcnss_wlan = { |
| .name = "wcnss_wlan", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(resources_wcnss_wlan), |
| .resource = resources_wcnss_wlan, |
| .dev = {.platform_data = &qcom_wcnss_pdata}, |
| }; |
| |
| static struct platform_device msm_device_iris_fm __devinitdata = { |
| .name = "iris_fm", |
| .id = -1, |
| }; |
| |
| #ifdef CONFIG_QSEECOM |
| /* qseecom bus scaling */ |
| static struct msm_bus_vectors qseecom_clks_init_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = 0, |
| .ab = 0, |
| }, |
| }; |
| |
| static struct msm_bus_vectors qseecom_enable_dfab_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 70000000UL, |
| .ib = 70000000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 2480000000UL, |
| .ib = 2480000000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = 0, |
| .ab = 0, |
| }, |
| }; |
| |
| static struct msm_bus_vectors qseecom_enable_sfpb_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 0, |
| .ib = 0, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = (64 * 8) * 1000000UL, |
| .ab = (64 * 8) * 100000UL, |
| }, |
| }; |
| |
| static struct msm_bus_vectors qseecom_enable_dfab_sfpb_vectors[] = { |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT0, |
| .dst = MSM_BUS_SLAVE_EBI_CH0, |
| .ab = 70000000UL, |
| .ib = 70000000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_ADM_PORT1, |
| .dst = MSM_BUS_SLAVE_GSBI1_UART, |
| .ab = 2480000000UL, |
| .ib = 2480000000UL, |
| }, |
| { |
| .src = MSM_BUS_MASTER_SPDM, |
| .dst = MSM_BUS_SLAVE_SPDM, |
| .ib = (64 * 8) * 1000000UL, |
| .ab = (64 * 8) * 100000UL, |
| }, |
| }; |
| |
| static struct msm_bus_paths qseecom_hw_bus_scale_usecases[] = { |
| { |
| ARRAY_SIZE(qseecom_clks_init_vectors), |
| qseecom_clks_init_vectors, |
| }, |
| { |
| ARRAY_SIZE(qseecom_enable_dfab_vectors), |
| qseecom_enable_dfab_vectors, |
| }, |
| { |
| ARRAY_SIZE(qseecom_enable_sfpb_vectors), |
| qseecom_enable_sfpb_vectors, |
| }, |
| { |
| ARRAY_SIZE(qseecom_enable_dfab_sfpb_vectors), |
| qseecom_enable_dfab_sfpb_vectors, |
| }, |
| }; |
| |
| static struct msm_bus_scale_pdata qseecom_bus_pdata = { |
| qseecom_hw_bus_scale_usecases, |
| ARRAY_SIZE(qseecom_hw_bus_scale_usecases), |
| .name = "qsee", |
| }; |
| |
| static struct platform_device qseecom_device = { |
| .name = "qseecom", |
| .id = 0, |
| .dev = { |
| .platform_data = &qseecom_bus_pdata, |
| }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| #define QCE_SIZE 0x10000 |
| #define QCE_0_BASE 0x11000000 |
| |
| #define QCE_HW_KEY_SUPPORT 0 |
| #define QCE_SHA_HMAC_SUPPORT 1 |
| #define QCE_SHARE_CE_RESOURCE 3 |
| #define QCE_CE_SHARED 0 |
| |
| static struct resource qcrypto_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV8064_CE_IN_CHAN, |
| .end = DMOV8064_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV8064_CE_IN_CRCI, |
| .end = DMOV8064_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV8064_CE_OUT_CRCI, |
| .end = DMOV8064_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| static struct resource qcedev_resources[] = { |
| [0] = { |
| .start = QCE_0_BASE, |
| .end = QCE_0_BASE + QCE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .name = "crypto_channels", |
| .start = DMOV8064_CE_IN_CHAN, |
| .end = DMOV8064_CE_OUT_CHAN, |
| .flags = IORESOURCE_DMA, |
| }, |
| [2] = { |
| .name = "crypto_crci_in", |
| .start = DMOV8064_CE_IN_CRCI, |
| .end = DMOV8064_CE_IN_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| [3] = { |
| .name = "crypto_crci_out", |
| .start = DMOV8064_CE_OUT_CRCI, |
| .end = DMOV8064_CE_OUT_CRCI, |
| .flags = IORESOURCE_DMA, |
| }, |
| }; |
| |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| |
| static struct msm_ce_hw_support qcrypto_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| .bus_scale_table = NULL, |
| }; |
| |
| static struct platform_device qcrypto_device = { |
| .name = "qcrypto", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcrypto_resources), |
| .resource = qcrypto_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcrypto_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| |
| static struct msm_ce_hw_support qcedev_ce_hw_suppport = { |
| .ce_shared = QCE_CE_SHARED, |
| .shared_ce_resource = QCE_SHARE_CE_RESOURCE, |
| .hw_key_support = QCE_HW_KEY_SUPPORT, |
| .sha_hmac = QCE_SHA_HMAC_SUPPORT, |
| .bus_scale_table = NULL, |
| }; |
| |
| static struct platform_device qcedev_device = { |
| .name = "qce", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(qcedev_resources), |
| .resource = qcedev_resources, |
| .dev = { |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &qcedev_ce_hw_suppport, |
| }, |
| }; |
| #endif |
| |
| static struct mdm_vddmin_resource mdm_vddmin_rscs = { |
| .rpm_id = MSM_RPM_ID_VDDMIN_GPIO, |
| .ap2mdm_vddmin_gpio = 30, |
| .modes = 0x03, |
| .drive_strength = 8, |
| .mdm2ap_vddmin_gpio = 80, |
| }; |
| |
| static struct gpiomux_setting mdm2ap_status_gpio_run_cfg = { |
| .func = GPIOMUX_FUNC_GPIO, |
| .drv = GPIOMUX_DRV_8MA, |
| .pull = GPIOMUX_PULL_NONE, |
| }; |
| |
| static struct mdm_platform_data mdm_platform_data = { |
| .mdm_version = "3.0", |
| .ramdump_delay_ms = 2000, |
| .early_power_on = 1, |
| .sfr_query = 1, |
| .send_shdn = 1, |
| .vddmin_resource = &mdm_vddmin_rscs, |
| .peripheral_platform_device = &apq8064_device_hsic_host, |
| .ramdump_timeout_ms = 120000, |
| .mdm2ap_status_gpio_run_cfg = &mdm2ap_status_gpio_run_cfg, |
| }; |
| |
| static struct tsens_platform_data apq_tsens_pdata = { |
| .tsens_factor = 1000, |
| .hw_type = APQ_8064, |
| .tsens_num_sensor = 11, |
| .slope = {1176, 1176, 1154, 1176, 1111, |
| 1132, 1132, 1199, 1132, 1199, 1132}, |
| }; |
| |
| static struct platform_device msm_tsens_device = { |
| .name = "tsens8960-tm", |
| .id = -1, |
| }; |
| |
| static struct msm_thermal_data msm_thermal_pdata = { |
| .sensor_id = 7, |
| .poll_ms = 250, |
| .limit_temp_degC = 60, |
| .temp_hysteresis_degC = 10, |
| .freq_step = 2, |
| }; |
| |
| #define MSM_SHARED_RAM_PHYS 0x80000000 |
| static void __init apq8064_map_io(void) |
| { |
| msm_shared_ram_phys = MSM_SHARED_RAM_PHYS; |
| msm_map_apq8064_io(); |
| if (socinfo_init() < 0) |
| pr_err("socinfo_init() failed!\n"); |
| } |
| |
| static void __init apq8064_init_irq(void) |
| { |
| struct msm_mpm_device_data *data = NULL; |
| |
| #ifdef CONFIG_MSM_MPM |
| data = &apq8064_mpm_dev_data; |
| #endif |
| |
| msm_mpm_irq_extn_init(data); |
| gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, |
| (void *)MSM_QGIC_CPU_BASE); |
| } |
| |
| static struct msm_mhl_platform_data mhl_platform_data = { |
| .irq = MSM_GPIO_TO_INT(MHL_GPIO_INT), |
| .gpio_mhl_int = MHL_GPIO_INT, |
| .gpio_mhl_reset = MHL_GPIO_RESET, |
| .gpio_mhl_power = 0, |
| .gpio_hdmi_mhl_mux = 0, |
| }; |
| |
| static struct i2c_board_info sii_device_info[] __initdata = { |
| { |
| /* |
| * keeps SI 8334 as the default |
| * MHL TX |
| */ |
| I2C_BOARD_INFO("sii8334", 0x39), |
| .platform_data = &mhl_platform_data, |
| .flags = I2C_CLIENT_WAKE, |
| }, |
| }; |
| |
| static struct platform_device msm8064_device_saw_regulator_core0 = { |
| .name = "saw-regulator", |
| .id = 0, |
| .dev = { |
| .platform_data = &msm8064_saw_regulator_pdata_8921_s5, |
| }, |
| }; |
| |
| static struct platform_device msm8064_device_saw_regulator_core1 = { |
| .name = "saw-regulator", |
| .id = 1, |
| .dev = { |
| .platform_data = &msm8064_saw_regulator_pdata_8921_s6, |
| }, |
| }; |
| |
| static struct platform_device msm8064_device_saw_regulator_core2 = { |
| .name = "saw-regulator", |
| .id = 2, |
| .dev = { |
| .platform_data = &msm8064_saw_regulator_pdata_8821_s0, |
| }, |
| }; |
| |
| static struct platform_device msm8064_device_saw_regulator_core3 = { |
| .name = "saw-regulator", |
| .id = 3, |
| .dev = { |
| .platform_data = &msm8064_saw_regulator_pdata_8821_s1, |
| |
| }, |
| }; |
| |
| static struct msm_rpmrs_level msm_rpmrs_levels[] = { |
| { |
| MSM_PM_SLEEP_MODE_WAIT_FOR_INTERRUPT, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 1, 784, 180000, 100, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_RETENTION, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 415, 715, 340827, 475, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE_STANDALONE, |
| MSM_RPMRS_LIMITS(ON, ACTIVE, MAX, ACTIVE), |
| true, |
| 1300, 228, 1200000, 2000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, GDHS, MAX, ACTIVE), |
| false, |
| 2000, 138, 1208400, 3200, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(ON, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 6000, 119, 1850300, 9000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, GDHS, MAX, ACTIVE), |
| false, |
| 9200, 68, 2839200, 16400, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, MAX, ACTIVE), |
| false, |
| 10300, 63, 3128000, 18200, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, ACTIVE, RET_HIGH), |
| false, |
| 18000, 10, 4602600, 27000, |
| }, |
| |
| { |
| MSM_PM_SLEEP_MODE_POWER_COLLAPSE, |
| MSM_RPMRS_LIMITS(OFF, HSFS_OPEN, RET_HIGH, RET_LOW), |
| false, |
| 20000, 2, 5752000, 32000, |
| }, |
| }; |
| |
| static struct msm_pm_boot_platform_data msm_pm_boot_pdata __initdata = { |
| .mode = MSM_PM_BOOT_CONFIG_TZ, |
| }; |
| |
| static struct msm_rpmrs_platform_data msm_rpmrs_data __initdata = { |
| .levels = &msm_rpmrs_levels[0], |
| .num_levels = ARRAY_SIZE(msm_rpmrs_levels), |
| .vdd_mem_levels = { |
| [MSM_RPMRS_VDD_MEM_RET_LOW] = 750000, |
| [MSM_RPMRS_VDD_MEM_RET_HIGH] = 750000, |
| [MSM_RPMRS_VDD_MEM_ACTIVE] = 1050000, |
| [MSM_RPMRS_VDD_MEM_MAX] = 1150000, |
| }, |
| .vdd_dig_levels = { |
| [MSM_RPMRS_VDD_DIG_RET_LOW] = 500000, |
| [MSM_RPMRS_VDD_DIG_RET_HIGH] = 750000, |
| [MSM_RPMRS_VDD_DIG_ACTIVE] = 950000, |
| [MSM_RPMRS_VDD_DIG_MAX] = 1150000, |
| }, |
| .vdd_mask = 0x7FFFFF, |
| .rpmrs_target_id = { |
| [MSM_RPMRS_ID_PXO_CLK] = MSM_RPM_ID_PXO_CLK, |
| [MSM_RPMRS_ID_L2_CACHE_CTL] = MSM_RPM_ID_LAST, |
| [MSM_RPMRS_ID_VDD_DIG_0] = MSM_RPM_ID_PM8921_S3_0, |
| [MSM_RPMRS_ID_VDD_DIG_1] = MSM_RPM_ID_PM8921_S3_1, |
| [MSM_RPMRS_ID_VDD_MEM_0] = MSM_RPM_ID_PM8921_L24_0, |
| [MSM_RPMRS_ID_VDD_MEM_1] = MSM_RPM_ID_PM8921_L24_1, |
| [MSM_RPMRS_ID_RPM_CTL] = MSM_RPM_ID_RPM_CTL, |
| }, |
| }; |
| |
| static uint8_t spm_wfi_cmd_sequence[] __initdata = { |
| 0x03, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_without_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x03, 0x01, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static uint8_t spm_retention_cmd_sequence[] __initdata = { |
| 0x00, 0x05, 0x03, 0x0D, |
| 0x0B, 0x00, 0x0f, |
| }; |
| |
| static uint8_t spm_power_collapse_with_rpm[] __initdata = { |
| 0x00, 0x24, 0x54, 0x10, |
| 0x09, 0x07, 0x01, 0x0B, |
| 0x10, 0x54, 0x30, 0x0C, |
| 0x24, 0x30, 0x0f, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_boot_cpu_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_MODE_CLOCK_GATING, |
| .notify_rpm = false, |
| .cmd = spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_MODE_POWER_RETENTION, |
| .notify_rpm = false, |
| .cmd = spm_retention_cmd_sequence, |
| }, |
| [2] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = false, |
| .cmd = spm_power_collapse_without_rpm, |
| }, |
| [3] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = spm_power_collapse_with_rpm, |
| }, |
| }; |
| static struct msm_spm_seq_entry msm_spm_nonboot_cpu_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_MODE_CLOCK_GATING, |
| .notify_rpm = false, |
| .cmd = spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = false, |
| .cmd = spm_power_collapse_without_rpm, |
| }, |
| [2] = { |
| .mode = MSM_SPM_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = spm_power_collapse_with_rpm, |
| }, |
| }; |
| |
| static uint8_t l2_spm_wfi_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x03, 0x20, |
| 0x00, 0x0f, |
| }; |
| |
| static uint8_t l2_spm_gdhs_cmd_sequence[] __initdata = { |
| 0x00, 0x20, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x20, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0f, |
| }; |
| static uint8_t l2_spm_power_off_cmd_sequence[] __initdata = { |
| 0x00, 0x10, 0x34, 0x64, |
| 0x48, 0x07, 0x48, 0x10, |
| 0x50, 0x64, 0x04, 0x34, |
| 0x50, 0x0F, |
| }; |
| |
| static struct msm_spm_seq_entry msm_spm_l2_seq_list[] __initdata = { |
| [0] = { |
| .mode = MSM_SPM_L2_MODE_RETENTION, |
| .notify_rpm = false, |
| .cmd = l2_spm_wfi_cmd_sequence, |
| }, |
| [1] = { |
| .mode = MSM_SPM_L2_MODE_GDHS, |
| .notify_rpm = true, |
| .cmd = l2_spm_gdhs_cmd_sequence, |
| }, |
| [2] = { |
| .mode = MSM_SPM_L2_MODE_POWER_COLLAPSE, |
| .notify_rpm = true, |
| .cmd = l2_spm_power_off_cmd_sequence, |
| }, |
| }; |
| |
| |
| static struct msm_spm_platform_data msm_spm_l2_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW_L2_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x00A000AE, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A00020, |
| .modes = msm_spm_l2_seq_list, |
| .num_modes = ARRAY_SIZE(msm_spm_l2_seq_list), |
| }, |
| }; |
| |
| static struct msm_spm_platform_data msm_spm_data[] __initdata = { |
| [0] = { |
| .reg_base_addr = MSM_SAW0_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x03020004, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0084009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x00A4001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_boot_cpu_seq_list), |
| .modes = msm_spm_boot_cpu_seq_list, |
| }, |
| [1] = { |
| .reg_base_addr = MSM_SAW1_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_nonboot_cpu_seq_list), |
| .modes = msm_spm_nonboot_cpu_seq_list, |
| }, |
| [2] = { |
| .reg_base_addr = MSM_SAW2_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_nonboot_cpu_seq_list), |
| .modes = msm_spm_nonboot_cpu_seq_list, |
| }, |
| [3] = { |
| .reg_base_addr = MSM_SAW3_BASE, |
| .reg_init_values[MSM_SPM_REG_SAW2_CFG] = 0x1F, |
| #if defined(CONFIG_MSM_AVS_HW) |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_CTL] = 0x00, |
| .reg_init_values[MSM_SPM_REG_SAW2_AVS_HYSTERESIS] = 0x00, |
| #endif |
| .reg_init_values[MSM_SPM_REG_SAW2_SPM_CTL] = 0x01, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DLY] = 0x02020204, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_0] = 0x0060009C, |
| .reg_init_values[MSM_SPM_REG_SAW2_PMIC_DATA_1] = 0x0000001C, |
| .vctl_timeout_us = 50, |
| .num_modes = ARRAY_SIZE(msm_spm_nonboot_cpu_seq_list), |
| .modes = msm_spm_nonboot_cpu_seq_list, |
| }, |
| }; |
| |
| static void __init apq8064_init_buses(void) |
| { |
| msm_bus_rpm_set_mt_mask(); |
| msm_bus_8064_apps_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8064_sys_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8064_mm_fabric_pdata.rpm_enabled = 1; |
| msm_bus_8064_apps_fabric.dev.platform_data = |
| &msm_bus_8064_apps_fabric_pdata; |
| msm_bus_8064_sys_fabric.dev.platform_data = |
| &msm_bus_8064_sys_fabric_pdata; |
| msm_bus_8064_mm_fabric.dev.platform_data = |
| &msm_bus_8064_mm_fabric_pdata; |
| msm_bus_8064_sys_fpb.dev.platform_data = &msm_bus_8064_sys_fpb_pdata; |
| msm_bus_8064_cpss_fpb.dev.platform_data = &msm_bus_8064_cpss_fpb_pdata; |
| } |
| |
| /* PCIe gpios */ |
| static struct msm_pcie_gpio_info_t msm_pcie_gpio_info[MSM_PCIE_MAX_GPIO] = { |
| {"rst_n", PM8921_MPP_PM_TO_SYS(PCIE_RST_N_PMIC_MPP), 0}, |
| {"pwr_en", PM8921_GPIO_PM_TO_SYS(PCIE_PWR_EN_PMIC_GPIO), 1}, |
| }; |
| |
| static struct msm_pcie_platform msm_pcie_platform_data = { |
| .gpio = msm_pcie_gpio_info, |
| .axi_addr = PCIE_AXI_BAR_PHYS, |
| .axi_size = PCIE_AXI_BAR_SIZE, |
| .wake_n = PM8921_GPIO_IRQ(PM8921_IRQ_BASE, PCIE_WAKE_N_PMIC_GPIO), |
| }; |
| |
| static int __init mpq8064_pcie_enabled(void) |
| { |
| return !((readl_relaxed(QFPROM_RAW_FEAT_CONFIG_ROW0_MSB) & BIT(21)) || |
| (readl_relaxed(QFPROM_RAW_OEM_CONFIG_ROW0_LSB) & BIT(4))); |
| } |
| |
| static void __init mpq8064_pcie_init(void) |
| { |
| if (mpq8064_pcie_enabled()) { |
| msm_device_pcie.dev.platform_data = &msm_pcie_platform_data; |
| platform_device_register(&msm_device_pcie); |
| } |
| } |
| |
| static struct platform_device apq8064_device_ext_5v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_MPP_PM_TO_SYS(7), |
| .dev = { |
| .platform_data |
| = &apq8064_gpio_regulator_pdata[GPIO_VREG_ID_EXT_5V], |
| }, |
| }; |
| |
| static struct platform_device apq8064_device_ext_mpp8_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_MPP_PM_TO_SYS(8), |
| .dev = { |
| .platform_data |
| = &apq8064_gpio_regulator_pdata[GPIO_VREG_ID_EXT_MPP8], |
| }, |
| }; |
| |
| static struct platform_device apq8064_device_ext_3p3v_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = APQ8064_EXT_3P3V_REG_EN_GPIO, |
| .dev = { |
| .platform_data = |
| &apq8064_gpio_regulator_pdata[GPIO_VREG_ID_EXT_3P3V], |
| }, |
| }; |
| |
| static struct platform_device apq8064_device_ext_ts_sw_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = PM8921_GPIO_PM_TO_SYS(23), |
| .dev = { |
| .platform_data |
| = &apq8064_gpio_regulator_pdata[GPIO_VREG_ID_EXT_TS_SW], |
| }, |
| }; |
| |
| static struct platform_device apq8064_device_rpm_regulator __devinitdata = { |
| .name = "rpm-regulator", |
| .id = 0, |
| .dev = { |
| .platform_data = &apq8064_rpm_regulator_pdata, |
| }, |
| }; |
| |
| static struct platform_device |
| apq8064_pm8921_device_rpm_regulator __devinitdata = { |
| .name = "rpm-regulator", |
| .id = 1, |
| .dev = { |
| .platform_data = &apq8064_rpm_regulator_pm8921_pdata, |
| }, |
| }; |
| |
| static struct gpio_ir_recv_platform_data gpio_ir_recv_pdata = { |
| .gpio_nr = 88, |
| .active_low = 1, |
| .can_wakeup = true, |
| }; |
| |
| static struct platform_device gpio_ir_recv_pdev = { |
| .name = "gpio-rc-recv", |
| .dev = { |
| .platform_data = &gpio_ir_recv_pdata, |
| }, |
| }; |
| |
| static struct platform_device *common_not_mpq_devices[] __initdata = { |
| &apq8064_device_qup_i2c_gsbi1, |
| &apq8064_device_qup_i2c_gsbi3, |
| &apq8064_device_qup_i2c_gsbi4, |
| }; |
| |
| static struct platform_device *common_mpq_devices[] __initdata = { |
| &mpq_cpudai_sec_i2s_rx, |
| &mpq_cpudai_mi2s_tx, |
| }; |
| |
| static struct platform_device *common_i2s_devices[] __initdata = { |
| &apq_cpudai_mi2s, |
| &apq_cpudai_i2s_rx, |
| &apq_cpudai_i2s_tx, |
| }; |
| |
| static struct platform_device *early_common_devices[] __initdata = { |
| &apq8064_device_acpuclk, |
| &apq8064_device_dmov, |
| &apq8064_device_qup_spi_gsbi5, |
| }; |
| |
| static struct platform_device *pm8921_common_devices[] __initdata = { |
| &apq8064_device_ext_5v_vreg, |
| &apq8064_device_ext_mpp8_vreg, |
| &apq8064_device_ext_3p3v_vreg, |
| &apq8064_device_ssbi_pmic1, |
| &apq8064_device_ssbi_pmic2, |
| }; |
| |
| static struct platform_device *pm8917_common_devices[] __initdata = { |
| &apq8064_device_ext_mpp8_vreg, |
| &apq8064_device_ext_3p3v_vreg, |
| &apq8064_device_ssbi_pmic1, |
| &apq8064_device_ssbi_pmic2, |
| }; |
| |
| static struct platform_device *common_devices[] __initdata = { |
| &msm_device_smd_apq8064, |
| &apq8064_device_otg, |
| &apq8064_device_gadget_peripheral, |
| &apq8064_device_hsusb_host, |
| &android_usb_device, |
| &msm_device_wcnss_wlan, |
| &msm_device_iris_fm, |
| &apq8064_fmem_device, |
| #ifdef CONFIG_ANDROID_PMEM |
| #ifndef CONFIG_MSM_MULTIMEDIA_USE_ION |
| &apq8064_android_pmem_device, |
| &apq8064_android_pmem_adsp_device, |
| &apq8064_android_pmem_audio_device, |
| #endif /*CONFIG_MSM_MULTIMEDIA_USE_ION*/ |
| #endif /*CONFIG_ANDROID_PMEM*/ |
| #ifdef CONFIG_ION_MSM |
| &apq8064_ion_dev, |
| #endif |
| &msm8064_device_watchdog, |
| &msm8064_device_saw_regulator_core0, |
| &msm8064_device_saw_regulator_core1, |
| &msm8064_device_saw_regulator_core2, |
| &msm8064_device_saw_regulator_core3, |
| #if defined(CONFIG_QSEECOM) |
| &qseecom_device, |
| #endif |
| |
| &msm_8064_device_tsif[0], |
| &msm_8064_device_tsif[1], |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCRYPTO) || \ |
| defined(CONFIG_CRYPTO_DEV_QCRYPTO_MODULE) |
| &qcrypto_device, |
| #endif |
| |
| #if defined(CONFIG_CRYPTO_DEV_QCEDEV) || \ |
| defined(CONFIG_CRYPTO_DEV_QCEDEV_MODULE) |
| &qcedev_device, |
| #endif |
| |
| #ifdef CONFIG_HW_RANDOM_MSM |
| &apq8064_device_rng, |
| #endif |
| &apq_pcm, |
| &apq_pcm_routing, |
| &apq_cpudai0, |
| &apq_cpudai1, |
| &apq_cpudai_hdmi_rx, |
| &apq_cpudai_bt_rx, |
| &apq_cpudai_bt_tx, |
| &apq_cpudai_fm_rx, |
| &apq_cpudai_fm_tx, |
| &apq_cpu_fe, |
| &apq_stub_codec, |
| &apq_voice, |
| &apq_voip, |
| &apq_lpa_pcm, |
| &apq_compr_dsp, |
| &apq_multi_ch_pcm, |
| &apq_lowlatency_pcm, |
| &apq_pcm_hostless, |
| &apq_cpudai_afe_01_rx, |
| &apq_cpudai_afe_01_tx, |
| &apq_cpudai_afe_02_rx, |
| &apq_cpudai_afe_02_tx, |
| &apq_pcm_afe, |
| &apq_cpudai_auxpcm_rx, |
| &apq_cpudai_auxpcm_tx, |
| &apq_cpudai_stub, |
| &apq_cpudai_slimbus_1_rx, |
| &apq_cpudai_slimbus_1_tx, |
| &apq_cpudai_slimbus_2_rx, |
| &apq_cpudai_slimbus_2_tx, |
| &apq_cpudai_slimbus_3_rx, |
| &apq_cpudai_slimbus_3_tx, |
| &apq8064_rpm_device, |
| &apq8064_rpm_log_device, |
| &apq8064_rpm_stat_device, |
| &apq8064_rpm_master_stat_device, |
| &apq_device_tz_log, |
| &msm_bus_8064_apps_fabric, |
| &msm_bus_8064_sys_fabric, |
| &msm_bus_8064_mm_fabric, |
| &msm_bus_8064_sys_fpb, |
| &msm_bus_8064_cpss_fpb, |
| &apq8064_msm_device_vidc, |
| &msm_pil_dsps, |
| &msm_8960_q6_lpass, |
| &msm_pil_vidc, |
| &msm_gss, |
| &apq8064_rtb_device, |
| &apq8064_msm_gov_device, |
| &apq8064_device_cache_erp, |
| &msm8960_device_ebi1_ch0_erp, |
| &msm8960_device_ebi1_ch1_erp, |
| &epm_adc_device, |
| &coresight_tpiu_device, |
| &coresight_etb_device, |
| &apq8064_coresight_funnel_device, |
| &coresight_etm0_device, |
| &coresight_etm1_device, |
| &coresight_etm2_device, |
| &coresight_etm3_device, |
| &apq_cpudai_slim_4_rx, |
| &apq_cpudai_slim_4_tx, |
| #ifdef CONFIG_MSM_GEMINI |
| &msm8960_gemini_device, |
| #endif |
| &apq8064_iommu_domain_device, |
| &msm_tsens_device, |
| &apq8064_cache_dump_device, |
| &msm_8064_device_tspp, |
| #ifdef CONFIG_BATTERY_BCL |
| &battery_bcl_device, |
| #endif |
| &apq8064_msm_mpd_device, |
| }; |
| |
| static struct platform_device *cdp_devices[] __initdata = { |
| &apq8064_device_uart_gsbi1, |
| &apq8064_device_uart_gsbi7, |
| &msm_device_sps_apq8064, |
| #ifdef CONFIG_MSM_ROTATOR |
| &msm_rotator_device, |
| #endif |
| &msm8064_pc_cntr, |
| }; |
| |
| static struct platform_device |
| mpq8064_device_ext_1p2_buck_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = SX150X_GPIO(4, 2), |
| .dev = { |
| .platform_data = |
| &mpq8064_gpio_regulator_pdata[GPIO_VREG_ID_AVC_1P2V], |
| }, |
| }; |
| |
| static struct platform_device |
| mpq8064_device_ext_1p8_buck_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = SX150X_GPIO(4, 4), |
| .dev = { |
| .platform_data = |
| &mpq8064_gpio_regulator_pdata[GPIO_VREG_ID_AVC_1P8V], |
| }, |
| }; |
| |
| static struct platform_device |
| mpq8064_device_ext_2p2_buck_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = SX150X_GPIO(4, 14), |
| .dev = { |
| .platform_data = |
| &mpq8064_gpio_regulator_pdata[GPIO_VREG_ID_AVC_2P2V], |
| }, |
| }; |
| |
| static struct platform_device |
| mpq8064_device_ext_5v_buck_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = SX150X_GPIO(4, 3), |
| .dev = { |
| .platform_data = |
| &mpq8064_gpio_regulator_pdata[GPIO_VREG_ID_AVC_5V], |
| }, |
| }; |
| |
| static struct platform_device |
| mpq8064_device_ext_3p3v_ldo_vreg __devinitdata = { |
| .name = GPIO_REGULATOR_DEV_NAME, |
| .id = SX150X_GPIO(4, 15), |
| .dev = { |
| .platform_data = |
| &mpq8064_gpio_regulator_pdata[GPIO_VREG_ID_AVC_3P3V], |
| }, |
| }; |
| |
| static struct platform_device rc_input_loopback_pdev = { |
| .name = "rc-user-input", |
| .id = -1, |
| }; |
| |
| static int rf4ce_gpio_init(void) |
| { |
| if (!machine_is_mpq8064_cdp() && |
| !machine_is_mpq8064_hrd() && |
| !machine_is_mpq8064_dtv()) |
| return -EINVAL; |
| |
| /* CC2533 SRDY Input */ |
| if (!gpio_request(SX150X_GPIO(4, 6), "rf4ce_srdy")) { |
| gpio_direction_input(SX150X_GPIO(4, 6)); |
| gpio_export(SX150X_GPIO(4, 6), true); |
| } |
| |
| /* CC2533 MRDY Output */ |
| if (!gpio_request(SX150X_GPIO(4, 5), "rf4ce_mrdy")) { |
| gpio_direction_output(SX150X_GPIO(4, 5), 1); |
| gpio_export(SX150X_GPIO(4, 5), true); |
| } |
| |
| /* CC2533 Reset Output */ |
| if (!gpio_request(SX150X_GPIO(4, 7), "rf4ce_reset")) { |
| gpio_direction_output(SX150X_GPIO(4, 7), 0); |
| gpio_export(SX150X_GPIO(4, 7), true); |
| } |
| |
| return 0; |
| } |
| late_initcall(rf4ce_gpio_init); |
| |
| #ifdef CONFIG_SERIAL_MSM_HS |
| static int configure_uart_gpios(int on) |
| { |
| int ret = 0, i; |
| int uart_gpios[] = {14, 15, 16, 17}; |
| |
| for (i = 0; i < ARRAY_SIZE(uart_gpios); i++) { |
| if (on) { |
| ret = gpio_request(uart_gpios[i], NULL); |
| if (ret) { |
| pr_err("%s:unable to request uart gpio[%d]\n", |
| __func__, uart_gpios[i]); |
| break; |
| } |
| } else { |
| gpio_free(uart_gpios[i]); |
| } |
| } |
| |
| if (ret && on && i) |
| for (; i >= 0; i--) |
| gpio_free(uart_gpios[i]); |
| return ret; |
| } |
| |
| static struct msm_serial_hs_platform_data mpq8064_gsbi6_uartdm_pdata = { |
| .inject_rx_on_wakeup = 1, |
| .rx_to_inject = 0xFD, |
| .gpio_config = configure_uart_gpios, |
| }; |
| #else |
| static struct msm_serial_hs_platform_data msm_uart_dm9_pdata; |
| #endif |
| |
| static struct platform_device *mpq_devices[] __initdata = { |
| &msm_device_sps_apq8064, |
| &mpq8064_device_qup_i2c_gsbi5, |
| #ifdef CONFIG_MSM_ROTATOR |
| &msm_rotator_device, |
| #endif |
| &gpio_ir_recv_pdev, |
| &mpq8064_device_ext_1p2_buck_vreg, |
| &mpq8064_device_ext_1p8_buck_vreg, |
| &mpq8064_device_ext_2p2_buck_vreg, |
| &mpq8064_device_ext_5v_buck_vreg, |
| &mpq8064_device_ext_3p3v_ldo_vreg, |
| #ifdef CONFIG_MSM_VCAP |
| &msm8064_device_vcap, |
| #endif |
| &rc_input_loopback_pdev, |
| }; |
| |
| static struct msm_spi_platform_data apq8064_qup_spi_gsbi5_pdata = { |
| .max_clock_speed = 1100000, |
| }; |
| |
| #define KS8851_IRQ_GPIO 43 |
| |
| static struct spi_board_info spi_board_info[] __initdata = { |
| { |
| .modalias = "ks8851", |
| .irq = MSM_GPIO_TO_INT(KS8851_IRQ_GPIO), |
| .max_speed_hz = 19200000, |
| .bus_num = 0, |
| .chip_select = 2, |
| .mode = SPI_MODE_0, |
| }, |
| { |
| .modalias = "epm_adc", |
| .max_speed_hz = 1100000, |
| .bus_num = 0, |
| .chip_select = 3, |
| .mode = SPI_MODE_0, |
| }, |
| }; |
| |
| static struct slim_boardinfo apq8064_slim_devices[] = { |
| { |
| .bus_num = 1, |
| .slim_slave = &apq8064_slim_tabla, |
| }, |
| { |
| .bus_num = 1, |
| .slim_slave = &apq8064_slim_tabla20, |
| }, |
| /* add more slimbus slaves as needed */ |
| }; |
| |
| static struct msm_i2c_platform_data apq8064_i2c_qup_gsbi1_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data apq8064_i2c_qup_gsbi3_pdata = { |
| .clk_freq = 384000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data apq8064_i2c_qup_gsbi4_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| static struct msm_i2c_platform_data mpq8064_i2c_qup_gsbi5_pdata = { |
| .clk_freq = 100000, |
| .src_clk_rate = 24000000, |
| }; |
| |
| #define GSBI_DUAL_MODE_CODE 0x60 |
| #define MSM_GSBI1_PHYS 0x12440000 |
| static void __init apq8064_i2c_init(void) |
| { |
| void __iomem *gsbi_mem; |
| |
| apq8064_device_qup_i2c_gsbi1.dev.platform_data = |
| &apq8064_i2c_qup_gsbi1_pdata; |
| gsbi_mem = ioremap_nocache(MSM_GSBI1_PHYS, 4); |
| writel_relaxed(GSBI_DUAL_MODE_CODE, gsbi_mem); |
| /* Ensure protocol code is written before proceeding */ |
| wmb(); |
| iounmap(gsbi_mem); |
| apq8064_i2c_qup_gsbi1_pdata.use_gsbi_shared_mode = 1; |
| apq8064_device_qup_i2c_gsbi3.dev.platform_data = |
| &apq8064_i2c_qup_gsbi3_pdata; |
| apq8064_device_qup_i2c_gsbi1.dev.platform_data = |
| &apq8064_i2c_qup_gsbi1_pdata; |
| apq8064_device_qup_i2c_gsbi4.dev.platform_data = |
| &apq8064_i2c_qup_gsbi4_pdata; |
| mpq8064_device_qup_i2c_gsbi5.dev.platform_data = |
| &mpq8064_i2c_qup_gsbi5_pdata; |
| } |
| |
| #if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE) |
| static int ethernet_init(void) |
| { |
| int ret; |
| ret = gpio_request(KS8851_IRQ_GPIO, "ks8851_irq"); |
| if (ret) { |
| pr_err("ks8851 gpio_request failed: %d\n", ret); |
| goto fail; |
| } |
| |
| return 0; |
| fail: |
| return ret; |
| } |
| #else |
| static int ethernet_init(void) |
| { |
| return 0; |
| } |
| #endif |
| |
| #define GPIO_KEY_HOME PM8921_GPIO_PM_TO_SYS(27) |
| #define GPIO_KEY_VOLUME_UP PM8921_GPIO_PM_TO_SYS(35) |
| #define GPIO_KEY_VOLUME_DOWN_PM8921 PM8921_GPIO_PM_TO_SYS(38) |
| #define GPIO_KEY_VOLUME_DOWN_PM8917 PM8921_GPIO_PM_TO_SYS(30) |
| #define GPIO_KEY_CAM_FOCUS PM8921_GPIO_PM_TO_SYS(3) |
| #define GPIO_KEY_CAM_SNAP PM8921_GPIO_PM_TO_SYS(4) |
| #define GPIO_KEY_ROTATION_PM8921 PM8921_GPIO_PM_TO_SYS(42) |
| #define GPIO_KEY_ROTATION_PM8917 PM8921_GPIO_PM_TO_SYS(8) |
| |
| static struct gpio_keys_button cdp_keys_pm8921[] = { |
| { |
| .code = KEY_HOME, |
| .gpio = GPIO_KEY_HOME, |
| .desc = "home_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEUP, |
| .gpio = GPIO_KEY_VOLUME_UP, |
| .desc = "volume_up_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEDOWN, |
| .gpio = GPIO_KEY_VOLUME_DOWN_PM8921, |
| .desc = "volume_down_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = SW_ROTATE_LOCK, |
| .gpio = GPIO_KEY_ROTATION_PM8921, |
| .desc = "rotate_key", |
| .active_low = 1, |
| .type = EV_SW, |
| .debounce_interval = 15, |
| }, |
| }; |
| |
| static struct gpio_keys_button cdp_keys_pm8917[] = { |
| { |
| .code = KEY_HOME, |
| .gpio = GPIO_KEY_HOME, |
| .desc = "home_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEUP, |
| .gpio = GPIO_KEY_VOLUME_UP, |
| .desc = "volume_up_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEDOWN, |
| .gpio = GPIO_KEY_VOLUME_DOWN_PM8917, |
| .desc = "volume_down_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = SW_ROTATE_LOCK, |
| .gpio = GPIO_KEY_ROTATION_PM8917, |
| .desc = "rotate_key", |
| .active_low = 1, |
| .type = EV_SW, |
| .debounce_interval = 15, |
| }, |
| }; |
| |
| static struct gpio_keys_platform_data cdp_keys_data = { |
| .buttons = cdp_keys_pm8921, |
| .nbuttons = ARRAY_SIZE(cdp_keys_pm8921), |
| }; |
| |
| static struct platform_device cdp_kp_pdev = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &cdp_keys_data, |
| }, |
| }; |
| |
| static struct gpio_keys_button mtp_keys[] = { |
| { |
| .code = KEY_CAMERA_FOCUS, |
| .gpio = GPIO_KEY_CAM_FOCUS, |
| .desc = "cam_focus_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEUP, |
| .gpio = GPIO_KEY_VOLUME_UP, |
| .desc = "volume_up_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEDOWN, |
| .gpio = GPIO_KEY_VOLUME_DOWN_PM8921, |
| .desc = "volume_down_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_CAMERA_SNAPSHOT, |
| .gpio = GPIO_KEY_CAM_SNAP, |
| .desc = "cam_snap_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .debounce_interval = 15, |
| }, |
| }; |
| |
| static struct gpio_keys_platform_data mtp_keys_data = { |
| .buttons = mtp_keys, |
| .nbuttons = ARRAY_SIZE(mtp_keys), |
| }; |
| |
| static struct platform_device mtp_kp_pdev = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &mtp_keys_data, |
| }, |
| }; |
| |
| static struct gpio_keys_button mpq_keys[] = { |
| { |
| .code = KEY_VOLUMEDOWN, |
| .gpio = GPIO_KEY_VOLUME_DOWN_PM8921, |
| .desc = "volume_down_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| { |
| .code = KEY_VOLUMEUP, |
| .gpio = GPIO_KEY_VOLUME_UP, |
| .desc = "volume_up_key", |
| .active_low = 1, |
| .type = EV_KEY, |
| .wakeup = 1, |
| .debounce_interval = 15, |
| }, |
| }; |
| |
| static struct gpio_keys_platform_data mpq_keys_data = { |
| .buttons = mpq_keys, |
| .nbuttons = ARRAY_SIZE(mpq_keys), |
| }; |
| |
| static struct platform_device mpq_gpio_keys_pdev = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &mpq_keys_data, |
| }, |
| }; |
| |
| #define MPQ_KP_ROW_BASE SX150X_EXP2_GPIO_BASE |
| #define MPQ_KP_COL_BASE (SX150X_EXP2_GPIO_BASE + 4) |
| |
| static unsigned int mpq_row_gpios[] = {MPQ_KP_ROW_BASE, MPQ_KP_ROW_BASE + 1, |
| MPQ_KP_ROW_BASE + 2, MPQ_KP_ROW_BASE + 3}; |
| static unsigned int mpq_col_gpios[] = {MPQ_KP_COL_BASE, MPQ_KP_COL_BASE + 1, |
| MPQ_KP_COL_BASE + 2}; |
| |
| static const unsigned int mpq_keymap[] = { |
| KEY(0, 0, KEY_UP), |
| KEY(0, 1, KEY_ENTER), |
| KEY(0, 2, KEY_3), |
| |
| KEY(1, 0, KEY_DOWN), |
| KEY(1, 1, KEY_EXIT), |
| KEY(1, 2, KEY_4), |
| |
| KEY(2, 0, KEY_LEFT), |
| KEY(2, 1, KEY_1), |
| KEY(2, 2, KEY_5), |
| |
| KEY(3, 0, KEY_RIGHT), |
| KEY(3, 1, KEY_2), |
| KEY(3, 2, KEY_6), |
| }; |
| |
| static struct matrix_keymap_data mpq_keymap_data = { |
| .keymap_size = ARRAY_SIZE(mpq_keymap), |
| .keymap = mpq_keymap, |
| }; |
| |
| static struct matrix_keypad_platform_data mpq_keypad_data = { |
| .keymap_data = &mpq_keymap_data, |
| .row_gpios = mpq_row_gpios, |
| .col_gpios = mpq_col_gpios, |
| .num_row_gpios = ARRAY_SIZE(mpq_row_gpios), |
| .num_col_gpios = ARRAY_SIZE(mpq_col_gpios), |
| .col_scan_delay_us = 32000, |
| .debounce_ms = 20, |
| .wakeup = 1, |
| .active_low = 1, |
| .no_autorepeat = 1, |
| }; |
| |
| static struct platform_device mpq_keypad_device = { |
| .name = "matrix-keypad", |
| .id = -1, |
| .dev = { |
| .platform_data = &mpq_keypad_data, |
| }, |
| }; |
| |
| /* Sensors DSPS platform data */ |
| #define DSPS_PIL_GENERIC_NAME "dsps" |
| static void __init apq8064_init_dsps(void) |
| { |
| struct msm_dsps_platform_data *pdata = |
| msm_dsps_device_8064.dev.platform_data; |
| pdata->pil_name = DSPS_PIL_GENERIC_NAME; |
| pdata->gpios = NULL; |
| pdata->gpios_num = 0; |
| |
| platform_device_register(&msm_dsps_device_8064); |
| } |
| |
| #define I2C_SURF 1 |
| #define I2C_FFA (1 << 1) |
| #define I2C_RUMI (1 << 2) |
| #define I2C_SIM (1 << 3) |
| #define I2C_LIQUID (1 << 4) |
| #define I2C_MPQ_CDP BIT(5) |
| #define I2C_MPQ_HRD BIT(6) |
| #define I2C_MPQ_DTV BIT(7) |
| |
| struct i2c_registry { |
| u8 machs; |
| int bus; |
| struct i2c_board_info *info; |
| int len; |
| }; |
| |
| static struct i2c_registry apq8064_i2c_devices[] __initdata = { |
| { |
| I2C_LIQUID, |
| APQ_8064_GSBI1_QUP_I2C_BUS_ID, |
| smb349_charger_i2c_info, |
| ARRAY_SIZE(smb349_charger_i2c_info) |
| }, |
| { |
| I2C_SURF | I2C_LIQUID, |
| APQ_8064_GSBI3_QUP_I2C_BUS_ID, |
| mxt_device_info, |
| ARRAY_SIZE(mxt_device_info), |
| }, |
| { |
| I2C_FFA, |
| APQ_8064_GSBI3_QUP_I2C_BUS_ID, |
| cyttsp_info, |
| ARRAY_SIZE(cyttsp_info), |
| }, |
| { |
| I2C_FFA | I2C_LIQUID, |
| APQ_8064_GSBI1_QUP_I2C_BUS_ID, |
| isa1200_board_info, |
| ARRAY_SIZE(isa1200_board_info), |
| }, |
| { |
| I2C_MPQ_CDP, |
| APQ_8064_GSBI5_QUP_I2C_BUS_ID, |
| cs8427_device_info, |
| ARRAY_SIZE(cs8427_device_info), |
| }, |
| { |
| I2C_SURF | I2C_FFA | I2C_LIQUID, |
| APQ_8064_GSBI1_QUP_I2C_BUS_ID, |
| sii_device_info, |
| ARRAY_SIZE(sii_device_info), |
| } |
| }; |
| |
| static struct i2c_registry apq8064_tabla_i2c_devices[] __initdata = { |
| { |
| .bus = APQ_8064_GSBI1_QUP_I2C_BUS_ID, |
| .info = apq8064_tabla_i2c_device_info, |
| .len = ARRAY_SIZE(apq8064_tabla_i2c_device_info), |
| }, |
| }; |
| |
| #define SX150X_EXP1_INT_N PM8921_MPP_IRQ(PM8921_IRQ_BASE, 9) |
| #define SX150X_EXP2_INT_N MSM_GPIO_TO_INT(81) |
| |
| struct sx150x_platform_data mpq8064_sx150x_pdata[] = { |
| [SX150X_EXP1] = { |
| .gpio_base = SX150X_EXP1_GPIO_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0x0, |
| .io_open_drain_ena = 0x0, |
| .io_polarity = 0, |
| .irq_summary = SX150X_EXP1_INT_N, |
| .irq_base = SX150X_EXP1_IRQ_BASE, |
| }, |
| [SX150X_EXP2] = { |
| .gpio_base = SX150X_EXP2_GPIO_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0f, |
| .io_pulldn_ena = 0x70, |
| .io_open_drain_ena = 0x0, |
| .io_polarity = 0, |
| .irq_summary = SX150X_EXP2_INT_N, |
| .irq_base = SX150X_EXP2_IRQ_BASE, |
| }, |
| [SX150X_EXP3] = { |
| .gpio_base = SX150X_EXP3_GPIO_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0x0, |
| .io_open_drain_ena = 0x0, |
| .io_polarity = 0, |
| .irq_summary = -1, |
| }, |
| [SX150X_EXP4] = { |
| .gpio_base = SX150X_EXP4_GPIO_BASE, |
| .oscio_is_gpo = false, |
| .io_pullup_ena = 0x0, |
| .io_pulldn_ena = 0x0, |
| .io_open_drain_ena = 0x0, |
| .io_polarity = 0, |
| .irq_summary = -1, |
| }, |
| }; |
| |
| static struct i2c_board_info sx150x_gpio_exp_info[] = { |
| { |
| I2C_BOARD_INFO("sx1509q", 0x70), |
| .platform_data = &mpq8064_sx150x_pdata[SX150X_EXP1], |
| }, |
| { |
| I2C_BOARD_INFO("sx1508q", 0x23), |
| .platform_data = &mpq8064_sx150x_pdata[SX150X_EXP2], |
| }, |
| { |
| I2C_BOARD_INFO("sx1508q", 0x22), |
| .platform_data = &mpq8064_sx150x_pdata[SX150X_EXP3], |
| }, |
| { |
| I2C_BOARD_INFO("sx1509q", 0x3E), |
| .platform_data = &mpq8064_sx150x_pdata[SX150X_EXP4], |
| }, |
| }; |
| |
| #define MPQ8064_I2C_GSBI5_BUS_ID 5 |
| |
| static struct i2c_registry mpq8064_i2c_devices[] __initdata = { |
| { |
| I2C_MPQ_CDP, |
| MPQ8064_I2C_GSBI5_BUS_ID, |
| sx150x_gpio_exp_info, |
| ARRAY_SIZE(sx150x_gpio_exp_info), |
| }, |
| }; |
| |
| static void __init register_i2c_devices(void) |
| { |
| u8 mach_mask = 0; |
| int i; |
| u32 version; |
| |
| #ifdef CONFIG_MSM_CAMERA |
| struct i2c_registry apq8064_camera_i2c_devices = { |
| I2C_SURF | I2C_FFA | I2C_LIQUID | I2C_RUMI, |
| APQ_8064_GSBI4_QUP_I2C_BUS_ID, |
| apq8064_camera_board_info.board_info, |
| apq8064_camera_board_info.num_i2c_board_info, |
| }; |
| #endif |
| /* Build the matching 'supported_machs' bitmask */ |
| if (machine_is_apq8064_cdp()) |
| mach_mask = I2C_SURF; |
| else if (machine_is_apq8064_mtp()) |
| mach_mask = I2C_FFA; |
| else if (machine_is_apq8064_liquid()) |
| mach_mask = I2C_LIQUID; |
| else if (PLATFORM_IS_MPQ8064()) |
| mach_mask = I2C_MPQ_CDP; |
| else |
| pr_err("unmatched machine ID in register_i2c_devices\n"); |
| |
| /* Run the array and install devices as appropriate */ |
| for (i = 0; i < ARRAY_SIZE(apq8064_i2c_devices); ++i) { |
| if (apq8064_i2c_devices[i].machs & mach_mask) |
| i2c_register_board_info(apq8064_i2c_devices[i].bus, |
| apq8064_i2c_devices[i].info, |
| apq8064_i2c_devices[i].len); |
| } |
| #ifdef CONFIG_MSM_CAMERA |
| if (apq8064_camera_i2c_devices.machs & mach_mask) |
| i2c_register_board_info(apq8064_camera_i2c_devices.bus, |
| apq8064_camera_i2c_devices.info, |
| apq8064_camera_i2c_devices.len); |
| #endif |
| |
| for (i = 0; i < ARRAY_SIZE(mpq8064_i2c_devices); ++i) { |
| if (mpq8064_i2c_devices[i].machs & mach_mask) |
| i2c_register_board_info( |
| mpq8064_i2c_devices[i].bus, |
| mpq8064_i2c_devices[i].info, |
| mpq8064_i2c_devices[i].len); |
| } |
| |
| if (machine_is_apq8064_mtp()) { |
| version = socinfo_get_platform_version(); |
| if (SOCINFO_VERSION_MINOR(version) == 1) |
| for (i = 0; i < ARRAY_SIZE(apq8064_tabla_i2c_devices); |
| ++i) |
| i2c_register_board_info( |
| apq8064_tabla_i2c_devices[i].bus, |
| apq8064_tabla_i2c_devices[i].info, |
| apq8064_tabla_i2c_devices[i].len); |
| } |
| |
| } |
| |
| static void enable_ddr3_regulator(void) |
| { |
| static struct regulator *ext_ddr3; |
| |
| /* Use MPP7 output state as a flag for PCDDR3 presence. */ |
| if (gpio_get_value_cansleep(PM8921_MPP_PM_TO_SYS(7)) > 0) { |
| ext_ddr3 = regulator_get(NULL, "ext_ddr3"); |
| if (IS_ERR(ext_ddr3) || ext_ddr3 == NULL) |
| pr_err("Could not get MPP7 regulator\n"); |
| else |
| regulator_enable(ext_ddr3); |
| } |
| } |
| |
| static void enable_avc_i2c_bus(void) |
| { |
| int avc_i2c_en_mpp = PM8921_MPP_PM_TO_SYS(8); |
| int rc; |
| |
| rc = gpio_request(avc_i2c_en_mpp, "avc_i2c_en"); |
| if (rc) |
| pr_err("request for avc_i2c_en mpp failed," |
| "rc=%d\n", rc); |
| else |
| gpio_set_value_cansleep(avc_i2c_en_mpp, 1); |
| } |
| |
| /* Modify platform data values to match requirements for PM8917. */ |
| static void __init apq8064_pm8917_pdata_fixup(void) |
| { |
| cdp_keys_data.buttons = cdp_keys_pm8917; |
| cdp_keys_data.nbuttons = ARRAY_SIZE(cdp_keys_pm8917); |
| } |
| |
| static void __init apq8064_common_init(void) |
| { |
| u32 platform_version = socinfo_get_platform_version(); |
| |
| if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) |
| apq8064_pm8917_pdata_fixup(); |
| platform_device_register(&msm_gpio_device); |
| msm_tsens_early_init(&apq_tsens_pdata); |
| msm_thermal_init(&msm_thermal_pdata); |
| if (socinfo_init() < 0) |
| pr_err("socinfo_init() failed!\n"); |
| BUG_ON(msm_rpm_init(&apq8064_rpm_data)); |
| BUG_ON(msm_rpmrs_levels_init(&msm_rpmrs_data)); |
| regulator_suppress_info_printing(); |
| if (socinfo_get_pmic_model() == PMIC_MODEL_PM8917) |
| configure_apq8064_pm8917_power_grid(); |
| platform_device_register(&apq8064_device_rpm_regulator); |
| if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917) |
| platform_device_register(&apq8064_pm8921_device_rpm_regulator); |
| if (msm_xo_init()) |
| pr_err("Failed to initialize XO votes\n"); |
| msm_clock_init(&apq8064_clock_init_data); |
| apq8064_init_gpiomux(); |
| apq8064_i2c_init(); |
| register_i2c_devices(); |
| |
| apq8064_device_qup_spi_gsbi5.dev.platform_data = |
| &apq8064_qup_spi_gsbi5_pdata; |
| apq8064_init_pmic(); |
| if (machine_is_apq8064_liquid()) |
| msm_otg_pdata.mhl_enable = true; |
| |
| if (apq8064_mhl_display_enabled()) |
| mhl_platform_data.mhl_enabled = true; |
| |
| android_usb_pdata.swfi_latency = |
| msm_rpmrs_levels[0].latency_us; |
| |
| apq8064_device_otg.dev.platform_data = &msm_otg_pdata; |
| apq8064_ehci_host_init(); |
| apq8064_init_buses(); |
| |
| platform_add_devices(early_common_devices, |
| ARRAY_SIZE(early_common_devices)); |
| if (socinfo_get_pmic_model() != PMIC_MODEL_PM8917) |
| platform_add_devices(pm8921_common_devices, |
| ARRAY_SIZE(pm8921_common_devices)); |
| else |
| platform_add_devices(pm8917_common_devices, |
| ARRAY_SIZE(pm8917_common_devices)); |
| if (machine_is_apq8064_cdp() || machine_is_apq8064_liquid()) |
| platform_device_register(&apq8064_device_ext_ts_sw_vreg); |
| platform_add_devices(common_devices, ARRAY_SIZE(common_devices)); |
| if (!(machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() || |
| machine_is_mpq8064_dtv())) |
| platform_add_devices(common_not_mpq_devices, |
| ARRAY_SIZE(common_not_mpq_devices)); |
| |
| if ((machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() || |
| machine_is_mpq8064_dtv())) |
| platform_add_devices(common_mpq_devices, |
| ARRAY_SIZE(common_mpq_devices)); |
| |
| if (machine_is_apq8064_mtp()) { |
| if (SOCINFO_VERSION_MINOR(platform_version) == 1) |
| platform_add_devices(common_i2s_devices, |
| ARRAY_SIZE(common_i2s_devices)); |
| } |
| |
| enable_ddr3_regulator(); |
| msm_hsic_pdata.swfi_latency = |
| msm_rpmrs_levels[0].latency_us; |
| if (machine_is_apq8064_mtp()) { |
| msm_hsic_pdata.log2_irq_thresh = 5, |
| apq8064_device_hsic_host.dev.platform_data = &msm_hsic_pdata; |
| device_initialize(&apq8064_device_hsic_host.dev); |
| } |
| apq8064_pm8xxx_gpio_mpp_init(); |
| apq8064_init_mmc(); |
| |
| if (machine_is_apq8064_mtp()) { |
| mdm_8064_device.dev.platform_data = &mdm_platform_data; |
| if (SOCINFO_VERSION_MINOR(platform_version) == 1) { |
| i2s_mdm_8064_device.dev.platform_data = |
| &mdm_platform_data; |
| platform_device_register(&i2s_mdm_8064_device); |
| } else { |
| mdm_8064_device.dev.platform_data = &mdm_platform_data; |
| platform_device_register(&mdm_8064_device); |
| } |
| } |
| platform_device_register(&apq8064_slim_ctrl); |
| if (machine_is_mpq8064_hrd() || machine_is_mpq8064_dtv()) { |
| apq8064_slim_devices[ARRAY_SIZE(apq8064_slim_devices) - 1].\ |
| slim_slave = &mpq8064_slim_ashiko20; |
| } |
| slim_register_board_info(apq8064_slim_devices, |
| ARRAY_SIZE(apq8064_slim_devices)); |
| if (!PLATFORM_IS_MPQ8064()) { |
| apq8064_init_dsps(); |
| platform_device_register(&msm_8960_riva); |
| } |
| msm_spm_init(msm_spm_data, ARRAY_SIZE(msm_spm_data)); |
| msm_spm_l2_init(msm_spm_l2_data); |
| BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata)); |
| apq8064_epm_adc_init(); |
| msm_pm_set_tz_retention_flag(1); |
| } |
| |
| static void __init apq8064_allocate_memory_regions(void) |
| { |
| apq8064_allocate_fb_region(); |
| } |
| |
| static void __init apq8064_cdp_init(void) |
| { |
| if (meminfo_init(SYS_MEMORY, SZ_256M) < 0) |
| pr_err("meminfo_init() failed!\n"); |
| if (machine_is_apq8064_mtp() && |
| SOCINFO_VERSION_MINOR(socinfo_get_platform_version()) == 1) |
| cyttsp_pdata.sleep_gpio = CYTTSP_TS_GPIO_SLEEP_ALT; |
| apq8064_common_init(); |
| if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() || |
| machine_is_mpq8064_dtv()) { |
| gpio_ir_recv_pdata.swfi_latency = |
| msm_rpmrs_levels[0].latency_us; |
| enable_avc_i2c_bus(); |
| msm_rotator_set_split_iommu_domain(); |
| platform_add_devices(mpq_devices, ARRAY_SIZE(mpq_devices)); |
| mpq8064_pcie_init(); |
| } else { |
| ethernet_init(); |
| msm_rotator_set_split_iommu_domain(); |
| platform_add_devices(cdp_devices, ARRAY_SIZE(cdp_devices)); |
| spi_register_board_info(spi_board_info, |
| ARRAY_SIZE(spi_board_info)); |
| } |
| apq8064_init_fb(); |
| apq8064_init_gpu(); |
| platform_add_devices(apq8064_footswitch, apq8064_num_footswitch); |
| #ifdef CONFIG_MSM_CAMERA |
| apq8064_init_cam(); |
| #endif |
| |
| if (machine_is_mpq8064_hrd() || machine_is_mpq8064_dtv()) { |
| platform_device_register(&mpq8064_device_uartdm_gsbi6); |
| #ifdef CONFIG_SERIAL_MSM_HS |
| /* GSBI6(2) - UARTDM_RX */ |
| mpq8064_gsbi6_uartdm_pdata.wakeup_irq = gpio_to_irq(15); |
| mpq8064_device_uartdm_gsbi6.dev.platform_data = |
| &mpq8064_gsbi6_uartdm_pdata; |
| #endif |
| } |
| |
| #if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE) |
| if (machine_is_mpq8064_hrd()) |
| apq8064_bt_power_init(); |
| #endif |
| |
| if (machine_is_apq8064_cdp() || machine_is_apq8064_liquid()) |
| platform_device_register(&cdp_kp_pdev); |
| |
| if (machine_is_apq8064_mtp()) |
| platform_device_register(&mtp_kp_pdev); |
| |
| change_memory_power = &apq8064_change_memory_power; |
| |
| if (machine_is_mpq8064_cdp()) { |
| platform_device_register(&mpq_gpio_keys_pdev); |
| platform_device_register(&mpq_keypad_device); |
| } |
| } |
| |
| MACHINE_START(APQ8064_CDP, "QCT APQ8064 CDP") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |
| |
| MACHINE_START(APQ8064_MTP, "QCT APQ8064 MTP") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |
| |
| MACHINE_START(APQ8064_LIQUID, "QCT APQ8064 LIQUID") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |
| |
| MACHINE_START(MPQ8064_CDP, "QCT MPQ8064 CDP") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |
| |
| MACHINE_START(MPQ8064_HRD, "QCT MPQ8064 HRD") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |
| |
| MACHINE_START(MPQ8064_DTV, "QCT MPQ8064 DTV") |
| .map_io = apq8064_map_io, |
| .reserve = apq8064_reserve, |
| .init_irq = apq8064_init_irq, |
| .handle_irq = gic_handle_irq, |
| .timer = &msm_timer, |
| .init_machine = apq8064_cdp_init, |
| .init_early = apq8064_allocate_memory_regions, |
| .init_very_early = apq8064_early_reserve, |
| .restart = msm_restart, |
| MACHINE_END |