| /* |
| * linux/fs/ext2/super.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/fs/minix/inode.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * Big-endian to little-endian byte-swapping/bitmaps by |
| * David S. Miller (davem@caip.rutgers.edu), 1995 |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/blkdev.h> |
| #include <linux/parser.h> |
| #include <linux/random.h> |
| #include <linux/buffer_head.h> |
| #include <linux/exportfs.h> |
| #include <linux/smp_lock.h> |
| #include <linux/vfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/mount.h> |
| #include <linux/log2.h> |
| #include <asm/uaccess.h> |
| #include "ext2.h" |
| #include "xattr.h" |
| #include "acl.h" |
| #include "xip.h" |
| |
| static void ext2_sync_super(struct super_block *sb, |
| struct ext2_super_block *es); |
| static int ext2_remount (struct super_block * sb, int * flags, char * data); |
| static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf); |
| |
| void ext2_error (struct super_block * sb, const char * function, |
| const char * fmt, ...) |
| { |
| va_list args; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| struct ext2_super_block *es = sbi->s_es; |
| |
| if (!(sb->s_flags & MS_RDONLY)) { |
| sbi->s_mount_state |= EXT2_ERROR_FS; |
| es->s_state = |
| cpu_to_le16(le16_to_cpu(es->s_state) | EXT2_ERROR_FS); |
| ext2_sync_super(sb, es); |
| } |
| |
| va_start(args, fmt); |
| printk(KERN_CRIT "EXT2-fs error (device %s): %s: ",sb->s_id, function); |
| vprintk(fmt, args); |
| printk("\n"); |
| va_end(args); |
| |
| if (test_opt(sb, ERRORS_PANIC)) |
| panic("EXT2-fs panic from previous error\n"); |
| if (test_opt(sb, ERRORS_RO)) { |
| printk("Remounting filesystem read-only\n"); |
| sb->s_flags |= MS_RDONLY; |
| } |
| } |
| |
| void ext2_warning (struct super_block * sb, const char * function, |
| const char * fmt, ...) |
| { |
| va_list args; |
| |
| va_start(args, fmt); |
| printk(KERN_WARNING "EXT2-fs warning (device %s): %s: ", |
| sb->s_id, function); |
| vprintk(fmt, args); |
| printk("\n"); |
| va_end(args); |
| } |
| |
| void ext2_update_dynamic_rev(struct super_block *sb) |
| { |
| struct ext2_super_block *es = EXT2_SB(sb)->s_es; |
| |
| if (le32_to_cpu(es->s_rev_level) > EXT2_GOOD_OLD_REV) |
| return; |
| |
| ext2_warning(sb, __FUNCTION__, |
| "updating to rev %d because of new feature flag, " |
| "running e2fsck is recommended", |
| EXT2_DYNAMIC_REV); |
| |
| es->s_first_ino = cpu_to_le32(EXT2_GOOD_OLD_FIRST_INO); |
| es->s_inode_size = cpu_to_le16(EXT2_GOOD_OLD_INODE_SIZE); |
| es->s_rev_level = cpu_to_le32(EXT2_DYNAMIC_REV); |
| /* leave es->s_feature_*compat flags alone */ |
| /* es->s_uuid will be set by e2fsck if empty */ |
| |
| /* |
| * The rest of the superblock fields should be zero, and if not it |
| * means they are likely already in use, so leave them alone. We |
| * can leave it up to e2fsck to clean up any inconsistencies there. |
| */ |
| } |
| |
| static void ext2_put_super (struct super_block * sb) |
| { |
| int db_count; |
| int i; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| |
| ext2_xattr_put_super(sb); |
| if (!(sb->s_flags & MS_RDONLY)) { |
| struct ext2_super_block *es = sbi->s_es; |
| |
| es->s_state = cpu_to_le16(sbi->s_mount_state); |
| ext2_sync_super(sb, es); |
| } |
| db_count = sbi->s_gdb_count; |
| for (i = 0; i < db_count; i++) |
| if (sbi->s_group_desc[i]) |
| brelse (sbi->s_group_desc[i]); |
| kfree(sbi->s_group_desc); |
| kfree(sbi->s_debts); |
| percpu_counter_destroy(&sbi->s_freeblocks_counter); |
| percpu_counter_destroy(&sbi->s_freeinodes_counter); |
| percpu_counter_destroy(&sbi->s_dirs_counter); |
| brelse (sbi->s_sbh); |
| sb->s_fs_info = NULL; |
| kfree(sbi); |
| |
| return; |
| } |
| |
| static struct kmem_cache * ext2_inode_cachep; |
| |
| static struct inode *ext2_alloc_inode(struct super_block *sb) |
| { |
| struct ext2_inode_info *ei; |
| ei = (struct ext2_inode_info *)kmem_cache_alloc(ext2_inode_cachep, GFP_KERNEL); |
| if (!ei) |
| return NULL; |
| #ifdef CONFIG_EXT2_FS_POSIX_ACL |
| ei->i_acl = EXT2_ACL_NOT_CACHED; |
| ei->i_default_acl = EXT2_ACL_NOT_CACHED; |
| #endif |
| ei->i_block_alloc_info = NULL; |
| ei->vfs_inode.i_version = 1; |
| return &ei->vfs_inode; |
| } |
| |
| static void ext2_destroy_inode(struct inode *inode) |
| { |
| kmem_cache_free(ext2_inode_cachep, EXT2_I(inode)); |
| } |
| |
| static void init_once(struct kmem_cache * cachep, void *foo) |
| { |
| struct ext2_inode_info *ei = (struct ext2_inode_info *) foo; |
| |
| rwlock_init(&ei->i_meta_lock); |
| #ifdef CONFIG_EXT2_FS_XATTR |
| init_rwsem(&ei->xattr_sem); |
| #endif |
| mutex_init(&ei->truncate_mutex); |
| inode_init_once(&ei->vfs_inode); |
| } |
| |
| static int init_inodecache(void) |
| { |
| ext2_inode_cachep = kmem_cache_create("ext2_inode_cache", |
| sizeof(struct ext2_inode_info), |
| 0, (SLAB_RECLAIM_ACCOUNT| |
| SLAB_MEM_SPREAD), |
| init_once); |
| if (ext2_inode_cachep == NULL) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| static void destroy_inodecache(void) |
| { |
| kmem_cache_destroy(ext2_inode_cachep); |
| } |
| |
| static void ext2_clear_inode(struct inode *inode) |
| { |
| struct ext2_block_alloc_info *rsv = EXT2_I(inode)->i_block_alloc_info; |
| #ifdef CONFIG_EXT2_FS_POSIX_ACL |
| struct ext2_inode_info *ei = EXT2_I(inode); |
| |
| if (ei->i_acl && ei->i_acl != EXT2_ACL_NOT_CACHED) { |
| posix_acl_release(ei->i_acl); |
| ei->i_acl = EXT2_ACL_NOT_CACHED; |
| } |
| if (ei->i_default_acl && ei->i_default_acl != EXT2_ACL_NOT_CACHED) { |
| posix_acl_release(ei->i_default_acl); |
| ei->i_default_acl = EXT2_ACL_NOT_CACHED; |
| } |
| #endif |
| ext2_discard_reservation(inode); |
| EXT2_I(inode)->i_block_alloc_info = NULL; |
| if (unlikely(rsv)) |
| kfree(rsv); |
| } |
| |
| static int ext2_show_options(struct seq_file *seq, struct vfsmount *vfs) |
| { |
| struct super_block *sb = vfs->mnt_sb; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| struct ext2_super_block *es = sbi->s_es; |
| unsigned long def_mount_opts; |
| |
| def_mount_opts = le32_to_cpu(es->s_default_mount_opts); |
| |
| if (sbi->s_sb_block != 1) |
| seq_printf(seq, ",sb=%lu", sbi->s_sb_block); |
| if (test_opt(sb, MINIX_DF)) |
| seq_puts(seq, ",minixdf"); |
| if (test_opt(sb, GRPID)) |
| seq_puts(seq, ",grpid"); |
| if (!test_opt(sb, GRPID) && (def_mount_opts & EXT2_DEFM_BSDGROUPS)) |
| seq_puts(seq, ",nogrpid"); |
| if (sbi->s_resuid != EXT2_DEF_RESUID || |
| le16_to_cpu(es->s_def_resuid) != EXT2_DEF_RESUID) { |
| seq_printf(seq, ",resuid=%u", sbi->s_resuid); |
| } |
| if (sbi->s_resgid != EXT2_DEF_RESGID || |
| le16_to_cpu(es->s_def_resgid) != EXT2_DEF_RESGID) { |
| seq_printf(seq, ",resgid=%u", sbi->s_resgid); |
| } |
| if (test_opt(sb, ERRORS_RO)) { |
| int def_errors = le16_to_cpu(es->s_errors); |
| |
| if (def_errors == EXT2_ERRORS_PANIC || |
| def_errors == EXT2_ERRORS_CONTINUE) { |
| seq_puts(seq, ",errors=remount-ro"); |
| } |
| } |
| if (test_opt(sb, ERRORS_CONT)) |
| seq_puts(seq, ",errors=continue"); |
| if (test_opt(sb, ERRORS_PANIC)) |
| seq_puts(seq, ",errors=panic"); |
| if (test_opt(sb, NO_UID32)) |
| seq_puts(seq, ",nouid32"); |
| if (test_opt(sb, DEBUG)) |
| seq_puts(seq, ",debug"); |
| if (test_opt(sb, OLDALLOC)) |
| seq_puts(seq, ",oldalloc"); |
| |
| #ifdef CONFIG_EXT2_FS_XATTR |
| if (test_opt(sb, XATTR_USER)) |
| seq_puts(seq, ",user_xattr"); |
| if (!test_opt(sb, XATTR_USER) && |
| (def_mount_opts & EXT2_DEFM_XATTR_USER)) { |
| seq_puts(seq, ",nouser_xattr"); |
| } |
| #endif |
| |
| #ifdef CONFIG_EXT2_FS_POSIX_ACL |
| if (test_opt(sb, POSIX_ACL)) |
| seq_puts(seq, ",acl"); |
| if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT2_DEFM_ACL)) |
| seq_puts(seq, ",noacl"); |
| #endif |
| |
| if (test_opt(sb, NOBH)) |
| seq_puts(seq, ",nobh"); |
| |
| #if defined(CONFIG_QUOTA) |
| if (sbi->s_mount_opt & EXT2_MOUNT_USRQUOTA) |
| seq_puts(seq, ",usrquota"); |
| |
| if (sbi->s_mount_opt & EXT2_MOUNT_GRPQUOTA) |
| seq_puts(seq, ",grpquota"); |
| #endif |
| |
| #if defined(CONFIG_EXT2_FS_XIP) |
| if (sbi->s_mount_opt & EXT2_MOUNT_XIP) |
| seq_puts(seq, ",xip"); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_QUOTA |
| static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data, size_t len, loff_t off); |
| static ssize_t ext2_quota_write(struct super_block *sb, int type, const char *data, size_t len, loff_t off); |
| #endif |
| |
| static const struct super_operations ext2_sops = { |
| .alloc_inode = ext2_alloc_inode, |
| .destroy_inode = ext2_destroy_inode, |
| .write_inode = ext2_write_inode, |
| .delete_inode = ext2_delete_inode, |
| .put_super = ext2_put_super, |
| .write_super = ext2_write_super, |
| .statfs = ext2_statfs, |
| .remount_fs = ext2_remount, |
| .clear_inode = ext2_clear_inode, |
| .show_options = ext2_show_options, |
| #ifdef CONFIG_QUOTA |
| .quota_read = ext2_quota_read, |
| .quota_write = ext2_quota_write, |
| #endif |
| }; |
| |
| static struct inode *ext2_nfs_get_inode(struct super_block *sb, |
| u64 ino, u32 generation) |
| { |
| struct inode *inode; |
| |
| if (ino < EXT2_FIRST_INO(sb) && ino != EXT2_ROOT_INO) |
| return ERR_PTR(-ESTALE); |
| if (ino > le32_to_cpu(EXT2_SB(sb)->s_es->s_inodes_count)) |
| return ERR_PTR(-ESTALE); |
| |
| /* iget isn't really right if the inode is currently unallocated!! |
| * ext2_read_inode currently does appropriate checks, but |
| * it might be "neater" to call ext2_get_inode first and check |
| * if the inode is valid..... |
| */ |
| inode = ext2_iget(sb, ino); |
| if (IS_ERR(inode)) |
| return ERR_CAST(inode); |
| if (generation && inode->i_generation != generation) { |
| /* we didn't find the right inode.. */ |
| iput(inode); |
| return ERR_PTR(-ESTALE); |
| } |
| return inode; |
| } |
| |
| static struct dentry *ext2_fh_to_dentry(struct super_block *sb, struct fid *fid, |
| int fh_len, int fh_type) |
| { |
| return generic_fh_to_dentry(sb, fid, fh_len, fh_type, |
| ext2_nfs_get_inode); |
| } |
| |
| static struct dentry *ext2_fh_to_parent(struct super_block *sb, struct fid *fid, |
| int fh_len, int fh_type) |
| { |
| return generic_fh_to_parent(sb, fid, fh_len, fh_type, |
| ext2_nfs_get_inode); |
| } |
| |
| /* Yes, most of these are left as NULL!! |
| * A NULL value implies the default, which works with ext2-like file |
| * systems, but can be improved upon. |
| * Currently only get_parent is required. |
| */ |
| static const struct export_operations ext2_export_ops = { |
| .fh_to_dentry = ext2_fh_to_dentry, |
| .fh_to_parent = ext2_fh_to_parent, |
| .get_parent = ext2_get_parent, |
| }; |
| |
| static unsigned long get_sb_block(void **data) |
| { |
| unsigned long sb_block; |
| char *options = (char *) *data; |
| |
| if (!options || strncmp(options, "sb=", 3) != 0) |
| return 1; /* Default location */ |
| options += 3; |
| sb_block = simple_strtoul(options, &options, 0); |
| if (*options && *options != ',') { |
| printk("EXT2-fs: Invalid sb specification: %s\n", |
| (char *) *data); |
| return 1; |
| } |
| if (*options == ',') |
| options++; |
| *data = (void *) options; |
| return sb_block; |
| } |
| |
| enum { |
| Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, |
| Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, |
| Opt_err_ro, Opt_nouid32, Opt_nocheck, Opt_debug, |
| Opt_oldalloc, Opt_orlov, Opt_nobh, Opt_user_xattr, Opt_nouser_xattr, |
| Opt_acl, Opt_noacl, Opt_xip, Opt_ignore, Opt_err, Opt_quota, |
| Opt_usrquota, Opt_grpquota, Opt_reservation, Opt_noreservation |
| }; |
| |
| static match_table_t tokens = { |
| {Opt_bsd_df, "bsddf"}, |
| {Opt_minix_df, "minixdf"}, |
| {Opt_grpid, "grpid"}, |
| {Opt_grpid, "bsdgroups"}, |
| {Opt_nogrpid, "nogrpid"}, |
| {Opt_nogrpid, "sysvgroups"}, |
| {Opt_resgid, "resgid=%u"}, |
| {Opt_resuid, "resuid=%u"}, |
| {Opt_sb, "sb=%u"}, |
| {Opt_err_cont, "errors=continue"}, |
| {Opt_err_panic, "errors=panic"}, |
| {Opt_err_ro, "errors=remount-ro"}, |
| {Opt_nouid32, "nouid32"}, |
| {Opt_nocheck, "check=none"}, |
| {Opt_nocheck, "nocheck"}, |
| {Opt_debug, "debug"}, |
| {Opt_oldalloc, "oldalloc"}, |
| {Opt_orlov, "orlov"}, |
| {Opt_nobh, "nobh"}, |
| {Opt_user_xattr, "user_xattr"}, |
| {Opt_nouser_xattr, "nouser_xattr"}, |
| {Opt_acl, "acl"}, |
| {Opt_noacl, "noacl"}, |
| {Opt_xip, "xip"}, |
| {Opt_grpquota, "grpquota"}, |
| {Opt_ignore, "noquota"}, |
| {Opt_quota, "quota"}, |
| {Opt_usrquota, "usrquota"}, |
| {Opt_reservation, "reservation"}, |
| {Opt_noreservation, "noreservation"}, |
| {Opt_err, NULL} |
| }; |
| |
| static int parse_options (char * options, |
| struct ext2_sb_info *sbi) |
| { |
| char * p; |
| substring_t args[MAX_OPT_ARGS]; |
| int option; |
| |
| if (!options) |
| return 1; |
| |
| while ((p = strsep (&options, ",")) != NULL) { |
| int token; |
| if (!*p) |
| continue; |
| |
| token = match_token(p, tokens, args); |
| switch (token) { |
| case Opt_bsd_df: |
| clear_opt (sbi->s_mount_opt, MINIX_DF); |
| break; |
| case Opt_minix_df: |
| set_opt (sbi->s_mount_opt, MINIX_DF); |
| break; |
| case Opt_grpid: |
| set_opt (sbi->s_mount_opt, GRPID); |
| break; |
| case Opt_nogrpid: |
| clear_opt (sbi->s_mount_opt, GRPID); |
| break; |
| case Opt_resuid: |
| if (match_int(&args[0], &option)) |
| return 0; |
| sbi->s_resuid = option; |
| break; |
| case Opt_resgid: |
| if (match_int(&args[0], &option)) |
| return 0; |
| sbi->s_resgid = option; |
| break; |
| case Opt_sb: |
| /* handled by get_sb_block() instead of here */ |
| /* *sb_block = match_int(&args[0]); */ |
| break; |
| case Opt_err_panic: |
| clear_opt (sbi->s_mount_opt, ERRORS_CONT); |
| clear_opt (sbi->s_mount_opt, ERRORS_RO); |
| set_opt (sbi->s_mount_opt, ERRORS_PANIC); |
| break; |
| case Opt_err_ro: |
| clear_opt (sbi->s_mount_opt, ERRORS_CONT); |
| clear_opt (sbi->s_mount_opt, ERRORS_PANIC); |
| set_opt (sbi->s_mount_opt, ERRORS_RO); |
| break; |
| case Opt_err_cont: |
| clear_opt (sbi->s_mount_opt, ERRORS_RO); |
| clear_opt (sbi->s_mount_opt, ERRORS_PANIC); |
| set_opt (sbi->s_mount_opt, ERRORS_CONT); |
| break; |
| case Opt_nouid32: |
| set_opt (sbi->s_mount_opt, NO_UID32); |
| break; |
| case Opt_nocheck: |
| clear_opt (sbi->s_mount_opt, CHECK); |
| break; |
| case Opt_debug: |
| set_opt (sbi->s_mount_opt, DEBUG); |
| break; |
| case Opt_oldalloc: |
| set_opt (sbi->s_mount_opt, OLDALLOC); |
| break; |
| case Opt_orlov: |
| clear_opt (sbi->s_mount_opt, OLDALLOC); |
| break; |
| case Opt_nobh: |
| set_opt (sbi->s_mount_opt, NOBH); |
| break; |
| #ifdef CONFIG_EXT2_FS_XATTR |
| case Opt_user_xattr: |
| set_opt (sbi->s_mount_opt, XATTR_USER); |
| break; |
| case Opt_nouser_xattr: |
| clear_opt (sbi->s_mount_opt, XATTR_USER); |
| break; |
| #else |
| case Opt_user_xattr: |
| case Opt_nouser_xattr: |
| printk("EXT2 (no)user_xattr options not supported\n"); |
| break; |
| #endif |
| #ifdef CONFIG_EXT2_FS_POSIX_ACL |
| case Opt_acl: |
| set_opt(sbi->s_mount_opt, POSIX_ACL); |
| break; |
| case Opt_noacl: |
| clear_opt(sbi->s_mount_opt, POSIX_ACL); |
| break; |
| #else |
| case Opt_acl: |
| case Opt_noacl: |
| printk("EXT2 (no)acl options not supported\n"); |
| break; |
| #endif |
| case Opt_xip: |
| #ifdef CONFIG_EXT2_FS_XIP |
| set_opt (sbi->s_mount_opt, XIP); |
| #else |
| printk("EXT2 xip option not supported\n"); |
| #endif |
| break; |
| |
| #if defined(CONFIG_QUOTA) |
| case Opt_quota: |
| case Opt_usrquota: |
| set_opt(sbi->s_mount_opt, USRQUOTA); |
| break; |
| |
| case Opt_grpquota: |
| set_opt(sbi->s_mount_opt, GRPQUOTA); |
| break; |
| #else |
| case Opt_quota: |
| case Opt_usrquota: |
| case Opt_grpquota: |
| printk(KERN_ERR |
| "EXT2-fs: quota operations not supported.\n"); |
| |
| break; |
| #endif |
| |
| case Opt_reservation: |
| set_opt(sbi->s_mount_opt, RESERVATION); |
| printk("reservations ON\n"); |
| break; |
| case Opt_noreservation: |
| clear_opt(sbi->s_mount_opt, RESERVATION); |
| printk("reservations OFF\n"); |
| break; |
| case Opt_ignore: |
| break; |
| default: |
| return 0; |
| } |
| } |
| return 1; |
| } |
| |
| static int ext2_setup_super (struct super_block * sb, |
| struct ext2_super_block * es, |
| int read_only) |
| { |
| int res = 0; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| |
| if (le32_to_cpu(es->s_rev_level) > EXT2_MAX_SUPP_REV) { |
| printk ("EXT2-fs warning: revision level too high, " |
| "forcing read-only mode\n"); |
| res = MS_RDONLY; |
| } |
| if (read_only) |
| return res; |
| if (!(sbi->s_mount_state & EXT2_VALID_FS)) |
| printk ("EXT2-fs warning: mounting unchecked fs, " |
| "running e2fsck is recommended\n"); |
| else if ((sbi->s_mount_state & EXT2_ERROR_FS)) |
| printk ("EXT2-fs warning: mounting fs with errors, " |
| "running e2fsck is recommended\n"); |
| else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 && |
| le16_to_cpu(es->s_mnt_count) >= |
| (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count)) |
| printk ("EXT2-fs warning: maximal mount count reached, " |
| "running e2fsck is recommended\n"); |
| else if (le32_to_cpu(es->s_checkinterval) && |
| (le32_to_cpu(es->s_lastcheck) + le32_to_cpu(es->s_checkinterval) <= get_seconds())) |
| printk ("EXT2-fs warning: checktime reached, " |
| "running e2fsck is recommended\n"); |
| if (!le16_to_cpu(es->s_max_mnt_count)) |
| es->s_max_mnt_count = cpu_to_le16(EXT2_DFL_MAX_MNT_COUNT); |
| es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1); |
| ext2_write_super(sb); |
| if (test_opt (sb, DEBUG)) |
| printk ("[EXT II FS %s, %s, bs=%lu, fs=%lu, gc=%lu, " |
| "bpg=%lu, ipg=%lu, mo=%04lx]\n", |
| EXT2FS_VERSION, EXT2FS_DATE, sb->s_blocksize, |
| sbi->s_frag_size, |
| sbi->s_groups_count, |
| EXT2_BLOCKS_PER_GROUP(sb), |
| EXT2_INODES_PER_GROUP(sb), |
| sbi->s_mount_opt); |
| return res; |
| } |
| |
| static int ext2_check_descriptors(struct super_block *sb) |
| { |
| int i; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| unsigned long first_block = le32_to_cpu(sbi->s_es->s_first_data_block); |
| unsigned long last_block; |
| |
| ext2_debug ("Checking group descriptors"); |
| |
| for (i = 0; i < sbi->s_groups_count; i++) { |
| struct ext2_group_desc *gdp = ext2_get_group_desc(sb, i, NULL); |
| |
| if (i == sbi->s_groups_count - 1) |
| last_block = le32_to_cpu(sbi->s_es->s_blocks_count) - 1; |
| else |
| last_block = first_block + |
| (EXT2_BLOCKS_PER_GROUP(sb) - 1); |
| |
| if (le32_to_cpu(gdp->bg_block_bitmap) < first_block || |
| le32_to_cpu(gdp->bg_block_bitmap) > last_block) |
| { |
| ext2_error (sb, "ext2_check_descriptors", |
| "Block bitmap for group %d" |
| " not in group (block %lu)!", |
| i, (unsigned long) le32_to_cpu(gdp->bg_block_bitmap)); |
| return 0; |
| } |
| if (le32_to_cpu(gdp->bg_inode_bitmap) < first_block || |
| le32_to_cpu(gdp->bg_inode_bitmap) > last_block) |
| { |
| ext2_error (sb, "ext2_check_descriptors", |
| "Inode bitmap for group %d" |
| " not in group (block %lu)!", |
| i, (unsigned long) le32_to_cpu(gdp->bg_inode_bitmap)); |
| return 0; |
| } |
| if (le32_to_cpu(gdp->bg_inode_table) < first_block || |
| le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group - 1 > |
| last_block) |
| { |
| ext2_error (sb, "ext2_check_descriptors", |
| "Inode table for group %d" |
| " not in group (block %lu)!", |
| i, (unsigned long) le32_to_cpu(gdp->bg_inode_table)); |
| return 0; |
| } |
| first_block += EXT2_BLOCKS_PER_GROUP(sb); |
| } |
| return 1; |
| } |
| |
| /* |
| * Maximal file size. There is a direct, and {,double-,triple-}indirect |
| * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. |
| * We need to be 1 filesystem block less than the 2^32 sector limit. |
| */ |
| static loff_t ext2_max_size(int bits) |
| { |
| loff_t res = EXT2_NDIR_BLOCKS; |
| int meta_blocks; |
| loff_t upper_limit; |
| |
| /* This is calculated to be the largest file size for a |
| * dense, file such that the total number of |
| * sectors in the file, including data and all indirect blocks, |
| * does not exceed 2^32 -1 |
| * __u32 i_blocks representing the total number of |
| * 512 bytes blocks of the file |
| */ |
| upper_limit = (1LL << 32) - 1; |
| |
| /* total blocks in file system block size */ |
| upper_limit >>= (bits - 9); |
| |
| |
| /* indirect blocks */ |
| meta_blocks = 1; |
| /* double indirect blocks */ |
| meta_blocks += 1 + (1LL << (bits-2)); |
| /* tripple indirect blocks */ |
| meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2))); |
| |
| upper_limit -= meta_blocks; |
| upper_limit <<= bits; |
| |
| res += 1LL << (bits-2); |
| res += 1LL << (2*(bits-2)); |
| res += 1LL << (3*(bits-2)); |
| res <<= bits; |
| if (res > upper_limit) |
| res = upper_limit; |
| |
| if (res > MAX_LFS_FILESIZE) |
| res = MAX_LFS_FILESIZE; |
| |
| return res; |
| } |
| |
| static unsigned long descriptor_loc(struct super_block *sb, |
| unsigned long logic_sb_block, |
| int nr) |
| { |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| unsigned long bg, first_data_block, first_meta_bg; |
| int has_super = 0; |
| |
| first_data_block = le32_to_cpu(sbi->s_es->s_first_data_block); |
| first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg); |
| |
| if (!EXT2_HAS_INCOMPAT_FEATURE(sb, EXT2_FEATURE_INCOMPAT_META_BG) || |
| nr < first_meta_bg) |
| return (logic_sb_block + nr + 1); |
| bg = sbi->s_desc_per_block * nr; |
| if (ext2_bg_has_super(sb, bg)) |
| has_super = 1; |
| return (first_data_block + has_super + (bg * sbi->s_blocks_per_group)); |
| } |
| |
| static int ext2_fill_super(struct super_block *sb, void *data, int silent) |
| { |
| struct buffer_head * bh; |
| struct ext2_sb_info * sbi; |
| struct ext2_super_block * es; |
| struct inode *root; |
| unsigned long block; |
| unsigned long sb_block = get_sb_block(&data); |
| unsigned long logic_sb_block; |
| unsigned long offset = 0; |
| unsigned long def_mount_opts; |
| long ret = -EINVAL; |
| int blocksize = BLOCK_SIZE; |
| int db_count; |
| int i, j; |
| __le32 features; |
| int err; |
| |
| sbi = kzalloc(sizeof(*sbi), GFP_KERNEL); |
| if (!sbi) |
| return -ENOMEM; |
| sb->s_fs_info = sbi; |
| sbi->s_sb_block = sb_block; |
| |
| /* |
| * See what the current blocksize for the device is, and |
| * use that as the blocksize. Otherwise (or if the blocksize |
| * is smaller than the default) use the default. |
| * This is important for devices that have a hardware |
| * sectorsize that is larger than the default. |
| */ |
| blocksize = sb_min_blocksize(sb, BLOCK_SIZE); |
| if (!blocksize) { |
| printk ("EXT2-fs: unable to set blocksize\n"); |
| goto failed_sbi; |
| } |
| |
| /* |
| * If the superblock doesn't start on a hardware sector boundary, |
| * calculate the offset. |
| */ |
| if (blocksize != BLOCK_SIZE) { |
| logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize; |
| offset = (sb_block*BLOCK_SIZE) % blocksize; |
| } else { |
| logic_sb_block = sb_block; |
| } |
| |
| if (!(bh = sb_bread(sb, logic_sb_block))) { |
| printk ("EXT2-fs: unable to read superblock\n"); |
| goto failed_sbi; |
| } |
| /* |
| * Note: s_es must be initialized as soon as possible because |
| * some ext2 macro-instructions depend on its value |
| */ |
| es = (struct ext2_super_block *) (((char *)bh->b_data) + offset); |
| sbi->s_es = es; |
| sb->s_magic = le16_to_cpu(es->s_magic); |
| |
| if (sb->s_magic != EXT2_SUPER_MAGIC) |
| goto cantfind_ext2; |
| |
| /* Set defaults before we parse the mount options */ |
| def_mount_opts = le32_to_cpu(es->s_default_mount_opts); |
| if (def_mount_opts & EXT2_DEFM_DEBUG) |
| set_opt(sbi->s_mount_opt, DEBUG); |
| if (def_mount_opts & EXT2_DEFM_BSDGROUPS) |
| set_opt(sbi->s_mount_opt, GRPID); |
| if (def_mount_opts & EXT2_DEFM_UID16) |
| set_opt(sbi->s_mount_opt, NO_UID32); |
| #ifdef CONFIG_EXT2_FS_XATTR |
| if (def_mount_opts & EXT2_DEFM_XATTR_USER) |
| set_opt(sbi->s_mount_opt, XATTR_USER); |
| #endif |
| #ifdef CONFIG_EXT2_FS_POSIX_ACL |
| if (def_mount_opts & EXT2_DEFM_ACL) |
| set_opt(sbi->s_mount_opt, POSIX_ACL); |
| #endif |
| |
| if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_PANIC) |
| set_opt(sbi->s_mount_opt, ERRORS_PANIC); |
| else if (le16_to_cpu(sbi->s_es->s_errors) == EXT2_ERRORS_CONTINUE) |
| set_opt(sbi->s_mount_opt, ERRORS_CONT); |
| else |
| set_opt(sbi->s_mount_opt, ERRORS_RO); |
| |
| sbi->s_resuid = le16_to_cpu(es->s_def_resuid); |
| sbi->s_resgid = le16_to_cpu(es->s_def_resgid); |
| |
| set_opt(sbi->s_mount_opt, RESERVATION); |
| |
| if (!parse_options ((char *) data, sbi)) |
| goto failed_mount; |
| |
| sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | |
| ((EXT2_SB(sb)->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? |
| MS_POSIXACL : 0); |
| |
| ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset |
| EXT2_MOUNT_XIP if not */ |
| |
| if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV && |
| (EXT2_HAS_COMPAT_FEATURE(sb, ~0U) || |
| EXT2_HAS_RO_COMPAT_FEATURE(sb, ~0U) || |
| EXT2_HAS_INCOMPAT_FEATURE(sb, ~0U))) |
| printk("EXT2-fs warning: feature flags set on rev 0 fs, " |
| "running e2fsck is recommended\n"); |
| /* |
| * Check feature flags regardless of the revision level, since we |
| * previously didn't change the revision level when setting the flags, |
| * so there is a chance incompat flags are set on a rev 0 filesystem. |
| */ |
| features = EXT2_HAS_INCOMPAT_FEATURE(sb, ~EXT2_FEATURE_INCOMPAT_SUPP); |
| if (features) { |
| printk("EXT2-fs: %s: couldn't mount because of " |
| "unsupported optional features (%x).\n", |
| sb->s_id, le32_to_cpu(features)); |
| goto failed_mount; |
| } |
| if (!(sb->s_flags & MS_RDONLY) && |
| (features = EXT2_HAS_RO_COMPAT_FEATURE(sb, ~EXT2_FEATURE_RO_COMPAT_SUPP))){ |
| printk("EXT2-fs: %s: couldn't mount RDWR because of " |
| "unsupported optional features (%x).\n", |
| sb->s_id, le32_to_cpu(features)); |
| goto failed_mount; |
| } |
| |
| blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size); |
| |
| if (ext2_use_xip(sb) && blocksize != PAGE_SIZE) { |
| if (!silent) |
| printk("XIP: Unsupported blocksize\n"); |
| goto failed_mount; |
| } |
| |
| /* If the blocksize doesn't match, re-read the thing.. */ |
| if (sb->s_blocksize != blocksize) { |
| brelse(bh); |
| |
| if (!sb_set_blocksize(sb, blocksize)) { |
| printk(KERN_ERR "EXT2-fs: blocksize too small for device.\n"); |
| goto failed_sbi; |
| } |
| |
| logic_sb_block = (sb_block*BLOCK_SIZE) / blocksize; |
| offset = (sb_block*BLOCK_SIZE) % blocksize; |
| bh = sb_bread(sb, logic_sb_block); |
| if(!bh) { |
| printk("EXT2-fs: Couldn't read superblock on " |
| "2nd try.\n"); |
| goto failed_sbi; |
| } |
| es = (struct ext2_super_block *) (((char *)bh->b_data) + offset); |
| sbi->s_es = es; |
| if (es->s_magic != cpu_to_le16(EXT2_SUPER_MAGIC)) { |
| printk ("EXT2-fs: Magic mismatch, very weird !\n"); |
| goto failed_mount; |
| } |
| } |
| |
| sb->s_maxbytes = ext2_max_size(sb->s_blocksize_bits); |
| |
| if (le32_to_cpu(es->s_rev_level) == EXT2_GOOD_OLD_REV) { |
| sbi->s_inode_size = EXT2_GOOD_OLD_INODE_SIZE; |
| sbi->s_first_ino = EXT2_GOOD_OLD_FIRST_INO; |
| } else { |
| sbi->s_inode_size = le16_to_cpu(es->s_inode_size); |
| sbi->s_first_ino = le32_to_cpu(es->s_first_ino); |
| if ((sbi->s_inode_size < EXT2_GOOD_OLD_INODE_SIZE) || |
| !is_power_of_2(sbi->s_inode_size) || |
| (sbi->s_inode_size > blocksize)) { |
| printk ("EXT2-fs: unsupported inode size: %d\n", |
| sbi->s_inode_size); |
| goto failed_mount; |
| } |
| } |
| |
| sbi->s_frag_size = EXT2_MIN_FRAG_SIZE << |
| le32_to_cpu(es->s_log_frag_size); |
| if (sbi->s_frag_size == 0) |
| goto cantfind_ext2; |
| sbi->s_frags_per_block = sb->s_blocksize / sbi->s_frag_size; |
| |
| sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); |
| sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); |
| sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); |
| |
| if (EXT2_INODE_SIZE(sb) == 0) |
| goto cantfind_ext2; |
| sbi->s_inodes_per_block = sb->s_blocksize / EXT2_INODE_SIZE(sb); |
| if (sbi->s_inodes_per_block == 0 || sbi->s_inodes_per_group == 0) |
| goto cantfind_ext2; |
| sbi->s_itb_per_group = sbi->s_inodes_per_group / |
| sbi->s_inodes_per_block; |
| sbi->s_desc_per_block = sb->s_blocksize / |
| sizeof (struct ext2_group_desc); |
| sbi->s_sbh = bh; |
| sbi->s_mount_state = le16_to_cpu(es->s_state); |
| sbi->s_addr_per_block_bits = |
| ilog2 (EXT2_ADDR_PER_BLOCK(sb)); |
| sbi->s_desc_per_block_bits = |
| ilog2 (EXT2_DESC_PER_BLOCK(sb)); |
| |
| if (sb->s_magic != EXT2_SUPER_MAGIC) |
| goto cantfind_ext2; |
| |
| if (sb->s_blocksize != bh->b_size) { |
| if (!silent) |
| printk ("VFS: Unsupported blocksize on dev " |
| "%s.\n", sb->s_id); |
| goto failed_mount; |
| } |
| |
| if (sb->s_blocksize != sbi->s_frag_size) { |
| printk ("EXT2-fs: fragsize %lu != blocksize %lu (not supported yet)\n", |
| sbi->s_frag_size, sb->s_blocksize); |
| goto failed_mount; |
| } |
| |
| if (sbi->s_blocks_per_group > sb->s_blocksize * 8) { |
| printk ("EXT2-fs: #blocks per group too big: %lu\n", |
| sbi->s_blocks_per_group); |
| goto failed_mount; |
| } |
| if (sbi->s_frags_per_group > sb->s_blocksize * 8) { |
| printk ("EXT2-fs: #fragments per group too big: %lu\n", |
| sbi->s_frags_per_group); |
| goto failed_mount; |
| } |
| if (sbi->s_inodes_per_group > sb->s_blocksize * 8) { |
| printk ("EXT2-fs: #inodes per group too big: %lu\n", |
| sbi->s_inodes_per_group); |
| goto failed_mount; |
| } |
| |
| if (EXT2_BLOCKS_PER_GROUP(sb) == 0) |
| goto cantfind_ext2; |
| sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) - |
| le32_to_cpu(es->s_first_data_block) - 1) |
| / EXT2_BLOCKS_PER_GROUP(sb)) + 1; |
| db_count = (sbi->s_groups_count + EXT2_DESC_PER_BLOCK(sb) - 1) / |
| EXT2_DESC_PER_BLOCK(sb); |
| sbi->s_group_desc = kmalloc (db_count * sizeof (struct buffer_head *), GFP_KERNEL); |
| if (sbi->s_group_desc == NULL) { |
| printk ("EXT2-fs: not enough memory\n"); |
| goto failed_mount; |
| } |
| bgl_lock_init(&sbi->s_blockgroup_lock); |
| sbi->s_debts = kcalloc(sbi->s_groups_count, sizeof(*sbi->s_debts), GFP_KERNEL); |
| if (!sbi->s_debts) { |
| printk ("EXT2-fs: not enough memory\n"); |
| goto failed_mount_group_desc; |
| } |
| for (i = 0; i < db_count; i++) { |
| block = descriptor_loc(sb, logic_sb_block, i); |
| sbi->s_group_desc[i] = sb_bread(sb, block); |
| if (!sbi->s_group_desc[i]) { |
| for (j = 0; j < i; j++) |
| brelse (sbi->s_group_desc[j]); |
| printk ("EXT2-fs: unable to read group descriptors\n"); |
| goto failed_mount_group_desc; |
| } |
| } |
| if (!ext2_check_descriptors (sb)) { |
| printk ("EXT2-fs: group descriptors corrupted!\n"); |
| goto failed_mount2; |
| } |
| sbi->s_gdb_count = db_count; |
| get_random_bytes(&sbi->s_next_generation, sizeof(u32)); |
| spin_lock_init(&sbi->s_next_gen_lock); |
| |
| /* per fileystem reservation list head & lock */ |
| spin_lock_init(&sbi->s_rsv_window_lock); |
| sbi->s_rsv_window_root = RB_ROOT; |
| /* |
| * Add a single, static dummy reservation to the start of the |
| * reservation window list --- it gives us a placeholder for |
| * append-at-start-of-list which makes the allocation logic |
| * _much_ simpler. |
| */ |
| sbi->s_rsv_window_head.rsv_start = EXT2_RESERVE_WINDOW_NOT_ALLOCATED; |
| sbi->s_rsv_window_head.rsv_end = EXT2_RESERVE_WINDOW_NOT_ALLOCATED; |
| sbi->s_rsv_window_head.rsv_alloc_hit = 0; |
| sbi->s_rsv_window_head.rsv_goal_size = 0; |
| ext2_rsv_window_add(sb, &sbi->s_rsv_window_head); |
| |
| err = percpu_counter_init(&sbi->s_freeblocks_counter, |
| ext2_count_free_blocks(sb)); |
| if (!err) { |
| err = percpu_counter_init(&sbi->s_freeinodes_counter, |
| ext2_count_free_inodes(sb)); |
| } |
| if (!err) { |
| err = percpu_counter_init(&sbi->s_dirs_counter, |
| ext2_count_dirs(sb)); |
| } |
| if (err) { |
| printk(KERN_ERR "EXT2-fs: insufficient memory\n"); |
| goto failed_mount3; |
| } |
| /* |
| * set up enough so that it can read an inode |
| */ |
| sb->s_op = &ext2_sops; |
| sb->s_export_op = &ext2_export_ops; |
| sb->s_xattr = ext2_xattr_handlers; |
| root = ext2_iget(sb, EXT2_ROOT_INO); |
| if (IS_ERR(root)) { |
| ret = PTR_ERR(root); |
| goto failed_mount3; |
| } |
| if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) { |
| iput(root); |
| printk(KERN_ERR "EXT2-fs: corrupt root inode, run e2fsck\n"); |
| goto failed_mount3; |
| } |
| |
| sb->s_root = d_alloc_root(root); |
| if (!sb->s_root) { |
| iput(root); |
| printk(KERN_ERR "EXT2-fs: get root inode failed\n"); |
| ret = -ENOMEM; |
| goto failed_mount3; |
| } |
| if (EXT2_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) |
| ext2_warning(sb, __FUNCTION__, |
| "mounting ext3 filesystem as ext2"); |
| ext2_setup_super (sb, es, sb->s_flags & MS_RDONLY); |
| return 0; |
| |
| cantfind_ext2: |
| if (!silent) |
| printk("VFS: Can't find an ext2 filesystem on dev %s.\n", |
| sb->s_id); |
| goto failed_mount; |
| failed_mount3: |
| percpu_counter_destroy(&sbi->s_freeblocks_counter); |
| percpu_counter_destroy(&sbi->s_freeinodes_counter); |
| percpu_counter_destroy(&sbi->s_dirs_counter); |
| failed_mount2: |
| for (i = 0; i < db_count; i++) |
| brelse(sbi->s_group_desc[i]); |
| failed_mount_group_desc: |
| kfree(sbi->s_group_desc); |
| kfree(sbi->s_debts); |
| failed_mount: |
| brelse(bh); |
| failed_sbi: |
| sb->s_fs_info = NULL; |
| kfree(sbi); |
| return ret; |
| } |
| |
| static void ext2_commit_super (struct super_block * sb, |
| struct ext2_super_block * es) |
| { |
| es->s_wtime = cpu_to_le32(get_seconds()); |
| mark_buffer_dirty(EXT2_SB(sb)->s_sbh); |
| sb->s_dirt = 0; |
| } |
| |
| static void ext2_sync_super(struct super_block *sb, struct ext2_super_block *es) |
| { |
| es->s_free_blocks_count = cpu_to_le32(ext2_count_free_blocks(sb)); |
| es->s_free_inodes_count = cpu_to_le32(ext2_count_free_inodes(sb)); |
| es->s_wtime = cpu_to_le32(get_seconds()); |
| mark_buffer_dirty(EXT2_SB(sb)->s_sbh); |
| sync_dirty_buffer(EXT2_SB(sb)->s_sbh); |
| sb->s_dirt = 0; |
| } |
| |
| /* |
| * In the second extended file system, it is not necessary to |
| * write the super block since we use a mapping of the |
| * disk super block in a buffer. |
| * |
| * However, this function is still used to set the fs valid |
| * flags to 0. We need to set this flag to 0 since the fs |
| * may have been checked while mounted and e2fsck may have |
| * set s_state to EXT2_VALID_FS after some corrections. |
| */ |
| |
| void ext2_write_super (struct super_block * sb) |
| { |
| struct ext2_super_block * es; |
| lock_kernel(); |
| if (!(sb->s_flags & MS_RDONLY)) { |
| es = EXT2_SB(sb)->s_es; |
| |
| if (le16_to_cpu(es->s_state) & EXT2_VALID_FS) { |
| ext2_debug ("setting valid to 0\n"); |
| es->s_state = cpu_to_le16(le16_to_cpu(es->s_state) & |
| ~EXT2_VALID_FS); |
| es->s_free_blocks_count = cpu_to_le32(ext2_count_free_blocks(sb)); |
| es->s_free_inodes_count = cpu_to_le32(ext2_count_free_inodes(sb)); |
| es->s_mtime = cpu_to_le32(get_seconds()); |
| ext2_sync_super(sb, es); |
| } else |
| ext2_commit_super (sb, es); |
| } |
| sb->s_dirt = 0; |
| unlock_kernel(); |
| } |
| |
| static int ext2_remount (struct super_block * sb, int * flags, char * data) |
| { |
| struct ext2_sb_info * sbi = EXT2_SB(sb); |
| struct ext2_super_block * es; |
| unsigned long old_mount_opt = sbi->s_mount_opt; |
| struct ext2_mount_options old_opts; |
| unsigned long old_sb_flags; |
| int err; |
| |
| /* Store the old options */ |
| old_sb_flags = sb->s_flags; |
| old_opts.s_mount_opt = sbi->s_mount_opt; |
| old_opts.s_resuid = sbi->s_resuid; |
| old_opts.s_resgid = sbi->s_resgid; |
| |
| /* |
| * Allow the "check" option to be passed as a remount option. |
| */ |
| if (!parse_options (data, sbi)) { |
| err = -EINVAL; |
| goto restore_opts; |
| } |
| |
| sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | |
| ((sbi->s_mount_opt & EXT2_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0); |
| |
| ext2_xip_verify_sb(sb); /* see if bdev supports xip, unset |
| EXT2_MOUNT_XIP if not */ |
| |
| if ((ext2_use_xip(sb)) && (sb->s_blocksize != PAGE_SIZE)) { |
| printk("XIP: Unsupported blocksize\n"); |
| err = -EINVAL; |
| goto restore_opts; |
| } |
| |
| es = sbi->s_es; |
| if (((sbi->s_mount_opt & EXT2_MOUNT_XIP) != |
| (old_mount_opt & EXT2_MOUNT_XIP)) && |
| invalidate_inodes(sb)) |
| ext2_warning(sb, __FUNCTION__, "busy inodes while remounting "\ |
| "xip remain in cache (no functional problem)"); |
| if ((*flags & MS_RDONLY) == (sb->s_flags & MS_RDONLY)) |
| return 0; |
| if (*flags & MS_RDONLY) { |
| if (le16_to_cpu(es->s_state) & EXT2_VALID_FS || |
| !(sbi->s_mount_state & EXT2_VALID_FS)) |
| return 0; |
| /* |
| * OK, we are remounting a valid rw partition rdonly, so set |
| * the rdonly flag and then mark the partition as valid again. |
| */ |
| es->s_state = cpu_to_le16(sbi->s_mount_state); |
| es->s_mtime = cpu_to_le32(get_seconds()); |
| } else { |
| __le32 ret = EXT2_HAS_RO_COMPAT_FEATURE(sb, |
| ~EXT2_FEATURE_RO_COMPAT_SUPP); |
| if (ret) { |
| printk("EXT2-fs: %s: couldn't remount RDWR because of " |
| "unsupported optional features (%x).\n", |
| sb->s_id, le32_to_cpu(ret)); |
| err = -EROFS; |
| goto restore_opts; |
| } |
| /* |
| * Mounting a RDONLY partition read-write, so reread and |
| * store the current valid flag. (It may have been changed |
| * by e2fsck since we originally mounted the partition.) |
| */ |
| sbi->s_mount_state = le16_to_cpu(es->s_state); |
| if (!ext2_setup_super (sb, es, 0)) |
| sb->s_flags &= ~MS_RDONLY; |
| } |
| ext2_sync_super(sb, es); |
| return 0; |
| restore_opts: |
| sbi->s_mount_opt = old_opts.s_mount_opt; |
| sbi->s_resuid = old_opts.s_resuid; |
| sbi->s_resgid = old_opts.s_resgid; |
| sb->s_flags = old_sb_flags; |
| return err; |
| } |
| |
| static int ext2_statfs (struct dentry * dentry, struct kstatfs * buf) |
| { |
| struct super_block *sb = dentry->d_sb; |
| struct ext2_sb_info *sbi = EXT2_SB(sb); |
| struct ext2_super_block *es = sbi->s_es; |
| u64 fsid; |
| |
| if (test_opt (sb, MINIX_DF)) |
| sbi->s_overhead_last = 0; |
| else if (sbi->s_blocks_last != le32_to_cpu(es->s_blocks_count)) { |
| unsigned long i, overhead = 0; |
| smp_rmb(); |
| |
| /* |
| * Compute the overhead (FS structures). This is constant |
| * for a given filesystem unless the number of block groups |
| * changes so we cache the previous value until it does. |
| */ |
| |
| /* |
| * All of the blocks before first_data_block are |
| * overhead |
| */ |
| overhead = le32_to_cpu(es->s_first_data_block); |
| |
| /* |
| * Add the overhead attributed to the superblock and |
| * block group descriptors. If the sparse superblocks |
| * feature is turned on, then not all groups have this. |
| */ |
| for (i = 0; i < sbi->s_groups_count; i++) |
| overhead += ext2_bg_has_super(sb, i) + |
| ext2_bg_num_gdb(sb, i); |
| |
| /* |
| * Every block group has an inode bitmap, a block |
| * bitmap, and an inode table. |
| */ |
| overhead += (sbi->s_groups_count * |
| (2 + sbi->s_itb_per_group)); |
| sbi->s_overhead_last = overhead; |
| smp_wmb(); |
| sbi->s_blocks_last = le32_to_cpu(es->s_blocks_count); |
| } |
| |
| buf->f_type = EXT2_SUPER_MAGIC; |
| buf->f_bsize = sb->s_blocksize; |
| buf->f_blocks = le32_to_cpu(es->s_blocks_count) - sbi->s_overhead_last; |
| buf->f_bfree = ext2_count_free_blocks(sb); |
| es->s_free_blocks_count = cpu_to_le32(buf->f_bfree); |
| buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count); |
| if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count)) |
| buf->f_bavail = 0; |
| buf->f_files = le32_to_cpu(es->s_inodes_count); |
| buf->f_ffree = ext2_count_free_inodes(sb); |
| es->s_free_inodes_count = cpu_to_le32(buf->f_ffree); |
| buf->f_namelen = EXT2_NAME_LEN; |
| fsid = le64_to_cpup((void *)es->s_uuid) ^ |
| le64_to_cpup((void *)es->s_uuid + sizeof(u64)); |
| buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL; |
| buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL; |
| return 0; |
| } |
| |
| static int ext2_get_sb(struct file_system_type *fs_type, |
| int flags, const char *dev_name, void *data, struct vfsmount *mnt) |
| { |
| return get_sb_bdev(fs_type, flags, dev_name, data, ext2_fill_super, mnt); |
| } |
| |
| #ifdef CONFIG_QUOTA |
| |
| /* Read data from quotafile - avoid pagecache and such because we cannot afford |
| * acquiring the locks... As quota files are never truncated and quota code |
| * itself serializes the operations (and noone else should touch the files) |
| * we don't have to be afraid of races */ |
| static ssize_t ext2_quota_read(struct super_block *sb, int type, char *data, |
| size_t len, loff_t off) |
| { |
| struct inode *inode = sb_dqopt(sb)->files[type]; |
| sector_t blk = off >> EXT2_BLOCK_SIZE_BITS(sb); |
| int err = 0; |
| int offset = off & (sb->s_blocksize - 1); |
| int tocopy; |
| size_t toread; |
| struct buffer_head tmp_bh; |
| struct buffer_head *bh; |
| loff_t i_size = i_size_read(inode); |
| |
| if (off > i_size) |
| return 0; |
| if (off+len > i_size) |
| len = i_size-off; |
| toread = len; |
| while (toread > 0) { |
| tocopy = sb->s_blocksize - offset < toread ? |
| sb->s_blocksize - offset : toread; |
| |
| tmp_bh.b_state = 0; |
| err = ext2_get_block(inode, blk, &tmp_bh, 0); |
| if (err < 0) |
| return err; |
| if (!buffer_mapped(&tmp_bh)) /* A hole? */ |
| memset(data, 0, tocopy); |
| else { |
| bh = sb_bread(sb, tmp_bh.b_blocknr); |
| if (!bh) |
| return -EIO; |
| memcpy(data, bh->b_data+offset, tocopy); |
| brelse(bh); |
| } |
| offset = 0; |
| toread -= tocopy; |
| data += tocopy; |
| blk++; |
| } |
| return len; |
| } |
| |
| /* Write to quotafile */ |
| static ssize_t ext2_quota_write(struct super_block *sb, int type, |
| const char *data, size_t len, loff_t off) |
| { |
| struct inode *inode = sb_dqopt(sb)->files[type]; |
| sector_t blk = off >> EXT2_BLOCK_SIZE_BITS(sb); |
| int err = 0; |
| int offset = off & (sb->s_blocksize - 1); |
| int tocopy; |
| size_t towrite = len; |
| struct buffer_head tmp_bh; |
| struct buffer_head *bh; |
| |
| mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA); |
| while (towrite > 0) { |
| tocopy = sb->s_blocksize - offset < towrite ? |
| sb->s_blocksize - offset : towrite; |
| |
| tmp_bh.b_state = 0; |
| err = ext2_get_block(inode, blk, &tmp_bh, 1); |
| if (err < 0) |
| goto out; |
| if (offset || tocopy != EXT2_BLOCK_SIZE(sb)) |
| bh = sb_bread(sb, tmp_bh.b_blocknr); |
| else |
| bh = sb_getblk(sb, tmp_bh.b_blocknr); |
| if (!bh) { |
| err = -EIO; |
| goto out; |
| } |
| lock_buffer(bh); |
| memcpy(bh->b_data+offset, data, tocopy); |
| flush_dcache_page(bh->b_page); |
| set_buffer_uptodate(bh); |
| mark_buffer_dirty(bh); |
| unlock_buffer(bh); |
| brelse(bh); |
| offset = 0; |
| towrite -= tocopy; |
| data += tocopy; |
| blk++; |
| } |
| out: |
| if (len == towrite) |
| return err; |
| if (inode->i_size < off+len-towrite) |
| i_size_write(inode, off+len-towrite); |
| inode->i_version++; |
| inode->i_mtime = inode->i_ctime = CURRENT_TIME; |
| mark_inode_dirty(inode); |
| mutex_unlock(&inode->i_mutex); |
| return len - towrite; |
| } |
| |
| #endif |
| |
| static struct file_system_type ext2_fs_type = { |
| .owner = THIS_MODULE, |
| .name = "ext2", |
| .get_sb = ext2_get_sb, |
| .kill_sb = kill_block_super, |
| .fs_flags = FS_REQUIRES_DEV, |
| }; |
| |
| static int __init init_ext2_fs(void) |
| { |
| int err = init_ext2_xattr(); |
| if (err) |
| return err; |
| err = init_inodecache(); |
| if (err) |
| goto out1; |
| err = register_filesystem(&ext2_fs_type); |
| if (err) |
| goto out; |
| return 0; |
| out: |
| destroy_inodecache(); |
| out1: |
| exit_ext2_xattr(); |
| return err; |
| } |
| |
| static void __exit exit_ext2_fs(void) |
| { |
| unregister_filesystem(&ext2_fs_type); |
| destroy_inodecache(); |
| exit_ext2_xattr(); |
| } |
| |
| module_init(init_ext2_fs) |
| module_exit(exit_ext2_fs) |