drivers/net/wimax/i2400m/i2400m-usb.h - kernel/msm - Gitiles

 /*
  * Intel Wireless WiMAX Connection 2400m
  * USB-specific i2400m driver definitions
  *
  *
  * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *   * Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *   * Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in
  *     the documentation and/or other materials provided with the
  *     distribution.
  *   * Neither the name of Intel Corporation nor the names of its
  *     contributors may be used to endorse or promote products derived
  *     from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *
  * Intel Corporation <linux-wimax@intel.com>
  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
  * Yanir Lubetkin <yanirx.lubetkin@intel.com>
  *  - Initial implementation
  *
  *
  * This driver implements the bus-specific part of the i2400m for
  * USB. Check i2400m.h for a generic driver description.
  *
  * ARCHITECTURE
  *
  * This driver listens to notifications sent from the notification
  * endpoint (in usb-notif.c); when data is ready to read, the code in
  * there schedules a read from the device (usb-rx.c) and then passes
  * the data to the generic RX code (rx.c).
  *
  * When the generic driver needs to send data (network or control), it
  * queues up in the TX FIFO (tx.c) and that will notify the driver
  * through the i2400m->bus_tx_kick() callback
  * (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the
  * FIFO queue.
  *
  * This driver, as well, implements the USB-specific ops for the generic
  * driver to be able to setup/teardown communication with the device
  * [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the
  * device [i2400m_bus_reset()] and performing firmware upload
  * [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()].
  */

 #ifndef __I2400M_USB_H__
 #define __I2400M_USB_H__

 #include "i2400m.h"
 #include <linux/kthread.h>


 /*
  * Error Density Count: cheapo error density (over time) counter
  *
  * Originally by Reinette Chatre <reinette.chatre@intel.com>
  *
  * Embed an 'struct edc' somewhere. Each time there is a soft or
  * retryable error, call edc_inc() and check if the error top
  * watermark has been reached.
  */
 enum {
 	EDC_MAX_ERRORS = 10,
 	EDC_ERROR_TIMEFRAME = HZ,
 };

 /* error density counter */
 struct edc {
 	unsigned long timestart;
 	u16 errorcount;
 };

 struct i2400m_endpoint_cfg {
 	unsigned char bulk_out;
 	unsigned char notification;
 	unsigned char reset_cold;
 	unsigned char bulk_in;
 };

 static inline void edc_init(struct edc *edc)
 {
 	edc->timestart = jiffies;
 }

 /**
  * edc_inc - report a soft error and check if we are over the watermark
  *
  * @edc: pointer to error density counter.
  * @max_err: maximum number of errors we can accept over the timeframe
  * @timeframe: lenght of the timeframe (in jiffies).
  *
  * Returns: !0 1 if maximum acceptable errors per timeframe has been
  *     exceeded. 0 otherwise.
  *
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
  * this scheme will not work, for example if there are periodic occurences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
  * To use, embed a 'struct edc' somewhere, initialize it with
  * edc_init() and when an error hits:
  *
  * if (do_something_fails_with_a_soft_error) {
  *        if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME))
  * 	           Ops, hard error, do something about it
  *        else
  *                 Retry or ignore, depending on whatever
  * }
  */
 static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe)
 {
 	unsigned long now;

 	now = jiffies;
 	if (now - edc->timestart > timeframe) {
 		edc->errorcount = 1;
 		edc->timestart = now;
 	} else if (++edc->errorcount > max_err) {
 		edc->errorcount = 0;
 		edc->timestart = now;
 		return 1;
 	}
 	return 0;
 }

 /* Host-Device interface for USB */
 enum {
 	I2400M_USB_BOOT_RETRIES = 3,
 	I2400MU_MAX_NOTIFICATION_LEN = 256,
 	I2400MU_BLK_SIZE = 16,
 	I2400MU_PL_SIZE_MAX = 0x3EFF,

 	/* Device IDs */
 	USB_DEVICE_ID_I6050 = 0x0186,
 };


 /**
  * struct i2400mu - descriptor for a USB connected i2400m
  *
  * @i2400m: bus-generic i2400m implementation; has to be first (see
  *     it's documentation in i2400m.h).
  *
  * @usb_dev: pointer to our USB device
  *
  * @usb_iface: pointer to our USB interface
  *
  * @urb_edc: error density counter; used to keep a density-on-time tab
  *     on how many soft (retryable or ignorable) errors we get. If we
  *     go over the threshold, we consider the bus transport is failing
  *     too much and reset.
  *
  * @notif_urb: URB for receiving notifications from the device.
  *
  * @tx_kthread: thread we use for data TX. We use a thread because in
  *     order to do deep power saving and put the device to sleep, we
  *     need to call usb_autopm_*() [blocking functions].
  *
  * @tx_wq: waitqueue for the TX kthread to sleep when there is no data
  *     to be sent; when more data is available, it is woken up by
  *     i2400mu_bus_tx_kick().
  *
  * @rx_kthread: thread we use for data RX. We use a thread because in
  *     order to do deep power saving and put the device to sleep, we
  *     need to call usb_autopm_*() [blocking functions].
  *
  * @rx_wq: waitqueue for the RX kthread to sleep when there is no data
  *     to receive. When data is available, it is woken up by
  *     usb-notif.c:i2400mu_notification_grok().
  *
  * @rx_pending_count: number of rx-data-ready notifications that were
  *     still not handled by the RX kthread.
  *
  * @rx_size: current RX buffer size that is being used.
  *
  * @rx_size_acc: accumulator of the sizes of the previous read
  *     transactions.
  *
  * @rx_size_cnt: number of read transactions accumulated in
  *     @rx_size_acc.
  *
  * @do_autopm: disable(0)/enable(>0) calling the
  *     usb_autopm_get/put_interface() barriers when executing
  *     commands. See doc in i2400mu_suspend() for more information.
  *
  * @rx_size_auto_shrink: if true, the rx_size is shrinked
  *     automatically based on the average size of the received
  *     transactions. This allows the receive code to allocate smaller
  *     chunks of memory and thus reduce pressure on the memory
  *     allocator by not wasting so much space. By default it is
  *     enabled.
  *
  * @debugfs_dentry: hookup for debugfs files.
  *     These have to be in a separate directory, a child of
  *     (wimax_dev->debugfs_dentry) so they can be removed when the
  *     module unloads, as we don't keep each dentry.
  */
 struct i2400mu {
 	struct i2400m i2400m;		/* FIRST! See doc */

 	struct usb_device *usb_dev;
 	struct usb_interface *usb_iface;
 	struct edc urb_edc;		/* Error density counter */
 	struct i2400m_endpoint_cfg endpoint_cfg;

 	struct urb *notif_urb;
 	struct task_struct *tx_kthread;
 	wait_queue_head_t tx_wq;

 	struct task_struct *rx_kthread;
 	wait_queue_head_t rx_wq;
 	atomic_t rx_pending_count;
 	size_t rx_size, rx_size_acc, rx_size_cnt;
 	atomic_t do_autopm;
 	u8 rx_size_auto_shrink;

 	struct dentry *debugfs_dentry;
 };


 static inline
 void i2400mu_init(struct i2400mu *i2400mu)
 {
 	i2400m_init(&i2400mu->i2400m);
 	edc_init(&i2400mu->urb_edc);
 	init_waitqueue_head(&i2400mu->tx_wq);
 	atomic_set(&i2400mu->rx_pending_count, 0);
 	init_waitqueue_head(&i2400mu->rx_wq);
 	i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info);
 	atomic_set(&i2400mu->do_autopm, 1);
 	i2400mu->rx_size_auto_shrink = 1;
 }

 extern int i2400mu_notification_setup(struct i2400mu *);
 extern void i2400mu_notification_release(struct i2400mu *);

 extern int i2400mu_rx_setup(struct i2400mu *);
 extern void i2400mu_rx_release(struct i2400mu *);
 extern void i2400mu_rx_kick(struct i2400mu *);

 extern int i2400mu_tx_setup(struct i2400mu *);
 extern void i2400mu_tx_release(struct i2400mu *);
 extern void i2400mu_bus_tx_kick(struct i2400m *);

 extern ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *,
 				       const struct i2400m_bootrom_header *,
 				       size_t, int);
 extern ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *,
 					   struct i2400m_bootrom_header *,
 					   size_t);
 #endif /* #ifndef __I2400M_USB_H__ */
	/*
	* Intel Wireless WiMAX Connection 2400m
	* USB-specific i2400m driver definitions
	*
	*
	* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name of Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*
	* Intel Corporation <linux-wimax@intel.com>
	* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
	* Yanir Lubetkin <yanirx.lubetkin@intel.com>
	* - Initial implementation
	*
	*
	* This driver implements the bus-specific part of the i2400m for
	* USB. Check i2400m.h for a generic driver description.
	*
	* ARCHITECTURE
	*
	* This driver listens to notifications sent from the notification
	* endpoint (in usb-notif.c); when data is ready to read, the code in
	* there schedules a read from the device (usb-rx.c) and then passes
	* the data to the generic RX code (rx.c).
	*
	* When the generic driver needs to send data (network or control), it
	* queues up in the TX FIFO (tx.c) and that will notify the driver
	* through the i2400m->bus_tx_kick() callback
	* (usb-tx.c:i2400mu_bus_tx_kick) which will send the items in the
	* FIFO queue.
	*
	* This driver, as well, implements the USB-specific ops for the generic
	* driver to be able to setup/teardown communication with the device
	* [i2400m_bus_dev_start() and i2400m_bus_dev_stop()], reseting the
	* device [i2400m_bus_reset()] and performing firmware upload
	* [i2400m_bus_bm_cmd() and i2400_bus_bm_wait_for_ack()].
	*/

	#ifndef __I2400M_USB_H__
	#define __I2400M_USB_H__

	#include "i2400m.h"
	#include <linux/kthread.h>


	/*
	* Error Density Count: cheapo error density (over time) counter
	*
	* Originally by Reinette Chatre <reinette.chatre@intel.com>
	*
	* Embed an 'struct edc' somewhere. Each time there is a soft or
	* retryable error, call edc_inc() and check if the error top
	* watermark has been reached.
	*/
	enum {
	EDC_MAX_ERRORS = 10,
	EDC_ERROR_TIMEFRAME = HZ,
	};

	/* error density counter */
	struct edc {
	unsigned long timestart;
	u16 errorcount;
	};

	struct i2400m_endpoint_cfg {
	unsigned char bulk_out;
	unsigned char notification;
	unsigned char reset_cold;
	unsigned char bulk_in;
	};

	static inline void edc_init(struct edc *edc)
	{
	edc->timestart = jiffies;
	}

	/**
	* edc_inc - report a soft error and check if we are over the watermark
	*
	* @edc: pointer to error density counter.
	* @max_err: maximum number of errors we can accept over the timeframe
	* @timeframe: lenght of the timeframe (in jiffies).
	*
	* Returns: !0 1 if maximum acceptable errors per timeframe has been
	* exceeded. 0 otherwise.
	*
	* This is way to determine if the number of acceptable errors per time
	* period has been exceeded. It is not accurate as there are cases in which
	* this scheme will not work, for example if there are periodic occurences
	* of errors that straddle updates to the start time. This scheme is
	* sufficient for our usage.
	*
	* To use, embed a 'struct edc' somewhere, initialize it with
	* edc_init() and when an error hits:
	*
	* if (do_something_fails_with_a_soft_error) {
	* if (edc_inc(&my->edc, MAX_ERRORS, MAX_TIMEFRAME))
	* Ops, hard error, do something about it
	* else
	* Retry or ignore, depending on whatever
	* }
	*/
	static inline int edc_inc(struct edc *edc, u16 max_err, u16 timeframe)
	{
	unsigned long now;

	now = jiffies;
	if (now - edc->timestart > timeframe) {
	edc->errorcount = 1;
	edc->timestart = now;
	} else if (++edc->errorcount > max_err) {
	edc->errorcount = 0;
	edc->timestart = now;
	return 1;
	}
	return 0;
	}

	/* Host-Device interface for USB */
	enum {
	I2400M_USB_BOOT_RETRIES = 3,
	I2400MU_MAX_NOTIFICATION_LEN = 256,
	I2400MU_BLK_SIZE = 16,
	I2400MU_PL_SIZE_MAX = 0x3EFF,

	/* Device IDs */
	USB_DEVICE_ID_I6050 = 0x0186,
	};


	/**
	* struct i2400mu - descriptor for a USB connected i2400m
	*
	* @i2400m: bus-generic i2400m implementation; has to be first (see
	* it's documentation in i2400m.h).
	*
	* @usb_dev: pointer to our USB device
	*
	* @usb_iface: pointer to our USB interface
	*
	* @urb_edc: error density counter; used to keep a density-on-time tab
	* on how many soft (retryable or ignorable) errors we get. If we
	* go over the threshold, we consider the bus transport is failing
	* too much and reset.
	*
	* @notif_urb: URB for receiving notifications from the device.
	*
	* @tx_kthread: thread we use for data TX. We use a thread because in
	* order to do deep power saving and put the device to sleep, we
	* need to call usb_autopm_*() [blocking functions].
	*
	* @tx_wq: waitqueue for the TX kthread to sleep when there is no data
	* to be sent; when more data is available, it is woken up by
	* i2400mu_bus_tx_kick().
	*
	* @rx_kthread: thread we use for data RX. We use a thread because in
	* order to do deep power saving and put the device to sleep, we
	* need to call usb_autopm_*() [blocking functions].
	*
	* @rx_wq: waitqueue for the RX kthread to sleep when there is no data
	* to receive. When data is available, it is woken up by
	* usb-notif.c:i2400mu_notification_grok().
	*
	* @rx_pending_count: number of rx-data-ready notifications that were
	* still not handled by the RX kthread.
	*
	* @rx_size: current RX buffer size that is being used.
	*
	* @rx_size_acc: accumulator of the sizes of the previous read
	* transactions.
	*
	* @rx_size_cnt: number of read transactions accumulated in
	* @rx_size_acc.
	*
	* @do_autopm: disable(0)/enable(>0) calling the
	* usb_autopm_get/put_interface() barriers when executing
	* commands. See doc in i2400mu_suspend() for more information.
	*
	* @rx_size_auto_shrink: if true, the rx_size is shrinked
	* automatically based on the average size of the received
	* transactions. This allows the receive code to allocate smaller
	* chunks of memory and thus reduce pressure on the memory
	* allocator by not wasting so much space. By default it is
	* enabled.
	*
	* @debugfs_dentry: hookup for debugfs files.
	* These have to be in a separate directory, a child of
	* (wimax_dev->debugfs_dentry) so they can be removed when the
	* module unloads, as we don't keep each dentry.
	*/
	struct i2400mu {
	struct i2400m i2400m; /* FIRST! See doc */

	struct usb_device *usb_dev;
	struct usb_interface *usb_iface;
	struct edc urb_edc; /* Error density counter */
	struct i2400m_endpoint_cfg endpoint_cfg;

	struct urb *notif_urb;
	struct task_struct *tx_kthread;
	wait_queue_head_t tx_wq;

	struct task_struct *rx_kthread;
	wait_queue_head_t rx_wq;
	atomic_t rx_pending_count;
	size_t rx_size, rx_size_acc, rx_size_cnt;
	atomic_t do_autopm;
	u8 rx_size_auto_shrink;

	struct dentry *debugfs_dentry;
	};


	static inline
	void i2400mu_init(struct i2400mu *i2400mu)
	{
	i2400m_init(&i2400mu->i2400m);
	edc_init(&i2400mu->urb_edc);
	init_waitqueue_head(&i2400mu->tx_wq);
	atomic_set(&i2400mu->rx_pending_count, 0);
	init_waitqueue_head(&i2400mu->rx_wq);
	i2400mu->rx_size = PAGE_SIZE - sizeof(struct skb_shared_info);
	atomic_set(&i2400mu->do_autopm, 1);
	i2400mu->rx_size_auto_shrink = 1;
	}

	extern int i2400mu_notification_setup(struct i2400mu *);
	extern void i2400mu_notification_release(struct i2400mu *);

	extern int i2400mu_rx_setup(struct i2400mu *);
	extern void i2400mu_rx_release(struct i2400mu *);
	extern void i2400mu_rx_kick(struct i2400mu *);

	extern int i2400mu_tx_setup(struct i2400mu *);
	extern void i2400mu_tx_release(struct i2400mu *);
	extern void i2400mu_bus_tx_kick(struct i2400m *);

	extern ssize_t i2400mu_bus_bm_cmd_send(struct i2400m *,
	const struct i2400m_bootrom_header *,
	size_t, int);
	extern ssize_t i2400mu_bus_bm_wait_for_ack(struct i2400m *,
	struct i2400m_bootrom_header *,
	size_t);
	#endif /* #ifndef __I2400M_USB_H__ */