| /* |
| * Synaptics RMI4 touchscreen driver |
| * |
| * Copyright (C) 2012 Synaptics Incorporated |
| * |
| * Copyright (C) 2012 Alexandra Chin <alexandra.chin@tw.synaptics.com> |
| * Copyright (C) 2012 Scott Lin <scott.lin@tw.synaptics.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/input.h> |
| #include <linux/firmware.h> |
| #include <linux/string.h> |
| #include <linux/input/synaptics_dsx.h> |
| #include "synaptics_i2c_rmi4.h" |
| |
| #define SHOW_PROGRESS |
| #define MAX_FIRMWARE_ID_LEN 10 |
| #define FORCE_UPDATE false |
| #define INSIDE_FIRMWARE_UPDATE |
| |
| #define FW_IMAGE_OFFSET 0x100 |
| /* 0 to ignore flash block check to speed up flash time */ |
| #define CHECK_FLASH_BLOCK_STATUS 1 |
| |
| #define REG_MAP (1 << 0) |
| #define UNLOCKED (1 << 1) |
| #define HAS_CONFIG_ID (1 << 2) |
| #define HAS_PERM_CONFIG (1 << 3) |
| #define HAS_BL_CONFIG (1 << 4) |
| #define HAS_DISP_CONFIG (1 << 5) |
| #define HAS_CTRL1 (1 << 6) |
| |
| #define RMI4_INFO_MAX_LEN 200 |
| |
| #define RMI4_STORE_TS_INFO(buf, id, rev, fw_ver) \ |
| snprintf(buf, RMI4_INFO_MAX_LEN, \ |
| "controller\t= synaptics\n" \ |
| "model\t\t= %d rev %d\n" \ |
| "fw_ver\t\t= %d\n", id, rev, fw_ver) |
| |
| enum falsh_config_area { |
| UI_CONFIG_AREA = 0x00, |
| PERM_CONFIG_AREA = 0x01, |
| BL_CONFIG_AREA = 0x02, |
| DISP_CONFIG_AREA = 0x03 |
| }; |
| |
| enum flash_command { |
| CMD_WRITE_FW_BLOCK = 0x2, |
| CMD_ERASE_ALL = 0x3, |
| CMD_WRITE_LOCKDOWN_BLOCK = 0x4, |
| CMD_READ_CONFIG_BLOCK = 0x5, |
| CMD_WRITE_CONFIG_BLOCK = 0x6, |
| CMD_ERASE_CONFIG = 0x7, |
| CMD_READ_SENSOR_ID = 0x8, |
| CMD_ERASE_BL_CONFIG = 0x9, |
| CMD_ERASE_DISP_CONFIG = 0xA, |
| CMD_ENABLE_FLASH_PROG = 0xF |
| }; |
| |
| enum flash_area { |
| NONE, |
| UI_FIRMWARE, |
| CONFIG_AREA, |
| MISMATCH |
| }; |
| |
| enum image_file_option { |
| OPTION_BUILD_INFO = 0, |
| OPTION_CONTAIN_BOOTLOADER = 1, |
| }; |
| |
| enum flash_offset { |
| OFFSET_BOOTLOADER_ID, |
| OFFSET_FLASH_PROPERTIES, |
| OFFSET_BLOCK_SIZE, |
| OFFSET_FW_BLOCK_COUNT, |
| OFFSET_BLOCK_NUMBER, |
| OFFSET_BLOCK_DATA, |
| OFFSET_FLASH_CONTROL, |
| OFFSET_FLASH_STATUS |
| }; |
| |
| enum flash_update_mode { |
| NORMAL = 1, |
| FORCE = 2, |
| LOCKDOWN = 8 |
| }; |
| |
| #define SLEEP_MODE_NORMAL (0x00) |
| #define SLEEP_MODE_SENSOR_SLEEP (0x01) |
| #define SLEEP_MODE_RESERVED0 (0x02) |
| #define SLEEP_MODE_RESERVED1 (0x03) |
| |
| #define ENABLE_WAIT_MS (1 * 1000) |
| #define WRITE_WAIT_MS (3 * 1000) |
| #define ERASE_WAIT_MS (5 * 1000) |
| #define RESET_WAIT_MS (500) |
| |
| #define SLEEP_TIME_US 100 |
| |
| static int fwu_wait_for_idle(int timeout_ms); |
| |
| struct image_header_data { |
| union { |
| struct { |
| /* 0x00-0x0F */ |
| unsigned char file_checksum[4]; |
| unsigned char reserved_04; |
| unsigned char reserved_05; |
| unsigned char options_firmware_id:1; |
| unsigned char options_contain_bootloader:1; |
| unsigned char options_reserved:6; |
| unsigned char bootloader_version; |
| unsigned char firmware_size[4]; |
| unsigned char config_size[4]; |
| /* 0x10-0x1F */ |
| unsigned char product_id[SYNAPTICS_RMI4_PRODUCT_ID_SIZE]; |
| unsigned char pkg_id_lsb; |
| unsigned char pkg_id_msb; |
| unsigned char pkg_id_rev_lsb; |
| unsigned char pkg_id_rev_msb; |
| unsigned char product_info[SYNAPTICS_RMI4_PRODUCT_INFO_SIZE]; |
| /* 0x20-0x2F */ |
| unsigned char reserved_20_2f[0x10]; |
| /* 0x30-0x3F */ |
| unsigned char ds_firmware_id[0x10]; |
| /* 0x40-0x4F */ |
| unsigned char ds_customize_info[10]; |
| unsigned char reserved_4a_4f[6]; |
| /* 0x50-0x53*/ |
| unsigned char firmware_id[4]; |
| } __packed; |
| unsigned char data[0x54]; |
| }; |
| }; |
| |
| struct image_content { |
| bool is_contain_build_info; |
| unsigned int checksum; |
| unsigned int image_size; |
| unsigned int config_size; |
| unsigned char options; |
| unsigned char bootloader_version; |
| unsigned char product_id[SYNAPTICS_RMI4_PRODUCT_ID_SIZE + 1]; |
| unsigned char product_info[SYNAPTICS_RMI4_PRODUCT_INFO_SIZE]; |
| u16 package_id; |
| u16 package_revision_id; |
| unsigned int firmware_id; |
| const unsigned char *firmware_data; |
| const unsigned char *config_data; |
| const unsigned char *lockdown_data; |
| unsigned short lockdown_block_count; |
| }; |
| |
| struct pdt_properties { |
| union { |
| struct { |
| unsigned char reserved_1:6; |
| unsigned char has_bsr:1; |
| unsigned char reserved_2:1; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct f01_device_status { |
| union { |
| struct { |
| unsigned char status_code:4; |
| unsigned char reserved:2; |
| unsigned char flash_prog:1; |
| unsigned char unconfigured:1; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct f01_device_control { |
| union { |
| struct { |
| unsigned char sleep_mode:2; |
| unsigned char nosleep:1; |
| unsigned char reserved:2; |
| unsigned char charger_connected:1; |
| unsigned char report_rate:1; |
| unsigned char configured:1; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct f34_flash_control { |
| union { |
| /* version 0 */ |
| struct { |
| unsigned char command_v0:4; |
| unsigned char status:3; |
| unsigned char program_enabled:1; |
| } __packed; |
| /* version 1 */ |
| struct { |
| unsigned char command_v1:6; |
| unsigned char reserved:2; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct f34_flash_status { |
| union { |
| struct { |
| unsigned char status:6; |
| unsigned char reserved:1; |
| unsigned char program_enabled:1; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct f34_flash_properties { |
| union { |
| struct { |
| unsigned char regmap:1; |
| unsigned char unlocked:1; |
| unsigned char has_configid:1; |
| unsigned char has_perm_config:1; |
| unsigned char has_bl_config:1; |
| unsigned char has_display_config:1; |
| unsigned char has_blob_config:1; |
| unsigned char reserved:1; |
| } __packed; |
| unsigned char data[1]; |
| }; |
| }; |
| |
| struct synaptics_rmi4_fwu_handle { |
| bool initialized; |
| bool force_update; |
| bool do_lockdown; |
| bool interrupt_flag; |
| bool polling_mode; |
| char product_id[SYNAPTICS_RMI4_PRODUCT_ID_SIZE + 1]; |
| unsigned int image_size; |
| unsigned int data_pos; |
| unsigned char intr_mask; |
| unsigned char bootloader_id[2]; |
| unsigned char productinfo1; |
| unsigned char productinfo2; |
| unsigned char *ext_data_source; |
| unsigned char *read_config_buf; |
| const unsigned char *firmware_data; |
| const unsigned char *config_data; |
| const unsigned char *lockdown_data; |
| unsigned short block_size; |
| unsigned short fw_block_count; |
| unsigned short config_block_count; |
| unsigned short lockdown_block_count; |
| unsigned short perm_config_block_count; |
| unsigned short bl_config_block_count; |
| unsigned short disp_config_block_count; |
| unsigned short config_size; |
| unsigned short config_area; |
| unsigned short addr_f01_interrupt_register; |
| const unsigned char *data_buffer; |
| struct synaptics_rmi4_fn_desc f01_fd; |
| struct synaptics_rmi4_fn_desc f34_fd; |
| struct synaptics_rmi4_exp_fn_ptr *fn_ptr; |
| struct synaptics_rmi4_data *rmi4_data; |
| struct f34_flash_properties flash_properties; |
| struct workqueue_struct *fwu_workqueue; |
| struct delayed_work fwu_work; |
| char image_name[NAME_BUFFER_SIZE]; |
| struct image_content image_content; |
| char *ts_info; |
| }; |
| |
| static struct synaptics_rmi4_fwu_handle *fwu; |
| |
| DECLARE_COMPLETION(fwu_remove_complete); |
| |
| static unsigned int extract_uint(const unsigned char *ptr) |
| { |
| return (unsigned int)ptr[0] + |
| (unsigned int)ptr[1] * 0x100 + |
| (unsigned int)ptr[2] * 0x10000 + |
| (unsigned int)ptr[3] * 0x1000000; |
| } |
| |
| static unsigned int extract_uint_be(const unsigned char *ptr) |
| { |
| return (unsigned int)ptr[3] + |
| (unsigned int)ptr[2] * 0x100 + |
| (unsigned int)ptr[1] * 0x10000 + |
| (unsigned int)ptr[0] * 0x1000000; |
| } |
| |
| static void synaptics_rmi4_update_debug_info(void) |
| { |
| unsigned char pkg_id[4]; |
| unsigned int build_id; |
| struct synaptics_rmi4_device_info *rmi; |
| /* read device package id */ |
| fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.query_base_addr + 17, |
| pkg_id, |
| sizeof(pkg_id)); |
| rmi = &(fwu->rmi4_data->rmi4_mod_info); |
| |
| build_id = (unsigned int)rmi->build_id[0] + |
| (unsigned int)rmi->build_id[1] * 0x100 + |
| (unsigned int)rmi->build_id[2] * 0x10000; |
| |
| RMI4_STORE_TS_INFO(fwu->ts_info, pkg_id[1] << 8 | pkg_id[0], |
| pkg_id[3] << 8 | pkg_id[2], build_id); |
| } |
| |
| static void parse_header(void) |
| { |
| struct image_content *img = &fwu->image_content; |
| struct image_header_data *data = |
| (struct image_header_data *)fwu->data_buffer; |
| img->checksum = extract_uint(data->file_checksum); |
| img->bootloader_version = data->bootloader_version; |
| img->image_size = extract_uint(data->firmware_size); |
| img->config_size = extract_uint(data->config_size); |
| memcpy(img->product_id, data->product_id, |
| sizeof(data->product_id)); |
| img->product_id[sizeof(data->product_id)] = 0; |
| |
| img->product_id[sizeof(data->product_info)] = 0; |
| memcpy(img->product_info, data->product_info, |
| sizeof(data->product_info)); |
| |
| img->is_contain_build_info = |
| (data->options_firmware_id == (1 << OPTION_BUILD_INFO)); |
| |
| if (img->is_contain_build_info) { |
| img->package_id = (data->pkg_id_msb << 8) | |
| data->pkg_id_lsb; |
| img->package_revision_id = (data->pkg_id_rev_msb << 8) | |
| data->pkg_id_rev_lsb; |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s Package ID %d Rev %d\n", __func__, |
| img->package_id, img->package_revision_id); |
| |
| img->firmware_id = extract_uint(data->firmware_id); |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s Firwmare build id %d\n", __func__, |
| img->firmware_id); |
| } |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "Firwmare size %d, config size %d\n", |
| img->image_size, |
| img->config_size); |
| |
| /* get UI firmware offset */ |
| if (img->image_size) |
| img->firmware_data = fwu->data_buffer + FW_IMAGE_OFFSET; |
| /* get config offset*/ |
| if (img->config_size) |
| img->config_data = fwu->data_buffer + FW_IMAGE_OFFSET + |
| img->image_size; |
| /* get lockdown offset*/ |
| switch (img->bootloader_version) { |
| case 3: |
| case 4: |
| img->lockdown_block_count = 4; |
| break; |
| case 5: |
| case 6: |
| img->lockdown_block_count = 5; |
| break; |
| default: |
| dev_warn(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Not support lockdown in " \ |
| "bootloader version V%d\n", |
| __func__, img->bootloader_version); |
| img->lockdown_data = NULL; |
| } |
| |
| img->lockdown_data = fwu->data_buffer + |
| FW_IMAGE_OFFSET - |
| img->lockdown_block_count * fwu->block_size; |
| |
| fwu->lockdown_block_count = img->lockdown_block_count; |
| fwu->lockdown_data = img->lockdown_data; |
| fwu->config_data = img->config_data; |
| fwu->firmware_data = img->firmware_data; |
| return; |
| } |
| |
| static int fwu_read_f01_device_status(struct f01_device_status *status) |
| { |
| int retval; |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.data_base_addr, |
| status->data, |
| sizeof(status->data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read F01 device status\n", |
| __func__); |
| return retval; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned short fwu_get_address(enum flash_offset type) |
| { |
| int offset; |
| unsigned short addr = 0; |
| struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client; |
| |
| switch (type) { |
| case OFFSET_BOOTLOADER_ID: |
| offset = 0; |
| addr = fwu->f34_fd.query_base_addr + offset; |
| break; |
| case OFFSET_FLASH_PROPERTIES: |
| offset = ((fwu->f34_fd.version == 0) ? 2 : 1); |
| addr = fwu->f34_fd.query_base_addr + offset; |
| break; |
| case OFFSET_BLOCK_SIZE: |
| offset = ((fwu->f34_fd.version == 0) ? 3 : 2); |
| addr = fwu->f34_fd.query_base_addr + offset; |
| break; |
| case OFFSET_FW_BLOCK_COUNT: |
| offset = ((fwu->f34_fd.version == 0) ? 5 : 3); |
| addr = fwu->f34_fd.query_base_addr + offset; |
| break; |
| case OFFSET_BLOCK_NUMBER: |
| offset = 0; |
| addr = fwu->f34_fd.data_base_addr + offset; |
| break; |
| case OFFSET_BLOCK_DATA: |
| offset = ((fwu->f34_fd.version == 0) ? 2 : 1); |
| addr = fwu->f34_fd.data_base_addr + offset; |
| break; |
| case OFFSET_FLASH_CONTROL: |
| offset = ((fwu->f34_fd.version == 0) ? |
| 2 + (fwu->block_size) : 2); |
| addr = fwu->f34_fd.data_base_addr + offset; |
| break; |
| case OFFSET_FLASH_STATUS: |
| if (fwu->f34_fd.version == 1) { |
| offset = 3; |
| addr = fwu->f34_fd.data_base_addr + offset; |
| } else if (fwu->f34_fd.version == 0) { |
| dev_warn(&i2c_client->dev, |
| "%s: F$34 version 0 does not contain " \ |
| "flash status register\n", |
| __func__); |
| } |
| break; |
| default: |
| dev_err(&i2c_client->dev, |
| "%s: Unknown flash offset (%d)\n", |
| __func__, type); |
| break; |
| } |
| return addr; |
| } |
| |
| static int fwu_read_f34_queries(void) |
| { |
| int retval; |
| unsigned char count = 4; |
| unsigned char buf[10]; |
| struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client; |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_BOOTLOADER_ID), |
| fwu->bootloader_id, |
| sizeof(fwu->bootloader_id)); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read bootloader ID\n", |
| __func__); |
| return retval; |
| } |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_FLASH_PROPERTIES), |
| fwu->flash_properties.data, |
| sizeof(fwu->flash_properties.data)); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read flash properties\n", |
| __func__); |
| return retval; |
| } |
| |
| dev_info(&i2c_client->dev, "%s perm:%d, bl:%d, display:%d\n", |
| __func__, |
| fwu->flash_properties.has_perm_config, |
| fwu->flash_properties.has_bl_config, |
| fwu->flash_properties.has_display_config); |
| |
| if (fwu->flash_properties.has_perm_config) |
| count += 2; |
| |
| if (fwu->flash_properties.has_bl_config) |
| count += 2; |
| |
| if (fwu->flash_properties.has_display_config) |
| count += 2; |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_BLOCK_SIZE), |
| buf, |
| 2); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read block size info\n", |
| __func__); |
| return retval; |
| } |
| |
| batohs(&fwu->block_size, &(buf[0])); |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_FW_BLOCK_COUNT), |
| buf, |
| count); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read block count info\n", |
| __func__); |
| return retval; |
| } |
| |
| batohs(&fwu->fw_block_count, &(buf[0])); |
| batohs(&fwu->config_block_count, &(buf[2])); |
| |
| count = 4; |
| |
| if (fwu->flash_properties.has_perm_config) { |
| batohs(&fwu->perm_config_block_count, &(buf[count])); |
| count += 2; |
| } |
| |
| if (fwu->flash_properties.has_bl_config) { |
| batohs(&fwu->bl_config_block_count, &(buf[count])); |
| count += 2; |
| } |
| |
| if (fwu->flash_properties.has_display_config) |
| batohs(&fwu->disp_config_block_count, &(buf[count])); |
| |
| return 0; |
| } |
| |
| static int fwu_read_interrupt_status(void) |
| { |
| int retval; |
| unsigned char interrupt_status; |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->addr_f01_interrupt_register, |
| &interrupt_status, |
| sizeof(interrupt_status)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read flash status\n", |
| __func__); |
| return retval; |
| } |
| return interrupt_status; |
| } |
| |
| static int fwu_read_f34_flash_status(unsigned char *status) |
| { |
| int retval; |
| struct f34_flash_control flash_control; |
| struct f34_flash_status flash_status; |
| |
| if (fwu->f34_fd.version == 1) { |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_FLASH_STATUS), |
| flash_status.data, |
| sizeof(flash_status.data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read flash status\n", |
| __func__); |
| return -EIO; |
| } |
| *status = flash_status.status; |
| } else { |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_FLASH_CONTROL), |
| flash_control.data, |
| sizeof(flash_control.data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read flash status\n", |
| __func__); |
| return -EIO; |
| } |
| *status = flash_control.status; |
| } |
| return 0; |
| } |
| |
| static int fwu_reset_device(void) |
| { |
| int retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Reset device\n", |
| __func__); |
| |
| retval = fwu->rmi4_data->reset_device(fwu->rmi4_data); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to reset core driver after reflash\n", |
| __func__); |
| return retval; |
| } |
| |
| fwu->polling_mode = false; |
| |
| return 0; |
| } |
| |
| static int fwu_write_f34_command(unsigned char cmd) |
| { |
| int retval; |
| struct f34_flash_control flash_control; |
| |
| flash_control.data[0] = cmd; |
| fwu->interrupt_flag = false; |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| fwu_get_address(OFFSET_FLASH_CONTROL), |
| flash_control.data, |
| sizeof(flash_control.data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write command 0x%02x\n", |
| __func__, flash_control.data[0]); |
| return retval; |
| } |
| return 0; |
| } |
| |
| static int fwu_wait_for_idle(int timeout_ms) |
| { |
| int count = 0; |
| int timeout_count = ((timeout_ms * 1000) / SLEEP_TIME_US) + 1; |
| do { |
| if (fwu->interrupt_flag) |
| return 0; |
| if (fwu->polling_mode) |
| if (fwu->intr_mask & fwu_read_interrupt_status()) |
| return 0; |
| usleep_range(SLEEP_TIME_US, SLEEP_TIME_US + 1); |
| } while (count++ < timeout_count); |
| |
| if (fwu->intr_mask & fwu_read_interrupt_status()) { |
| fwu->polling_mode = true; |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Switch to polling mode\n", |
| __func__); |
| return 0; |
| } |
| |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Timed out waiting for idle status\n", |
| __func__); |
| |
| return -ETIMEDOUT; |
| } |
| |
| static enum flash_area fwu_go_nogo(void) |
| { |
| int retval = 0; |
| int index = 0; |
| int deviceFirmwareID; |
| int imageConfigID; |
| int deviceConfigID; |
| unsigned long imageFirmwareID; |
| unsigned char firmware_id[4]; |
| unsigned char config_id[4]; |
| unsigned char pkg_id[4]; |
| char *strptr; |
| char *imagePR = kzalloc(sizeof(MAX_FIRMWARE_ID_LEN), GFP_KERNEL); |
| enum flash_area flash_area = NONE; |
| struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client; |
| struct f01_device_status f01_device_status; |
| struct image_content *img = &fwu->image_content; |
| |
| if (fwu->force_update) { |
| flash_area = UI_FIRMWARE; |
| goto exit; |
| } |
| |
| if (img->is_contain_build_info) { |
| /* if package id does not match, do not update firmware */ |
| fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.query_base_addr + 17, |
| pkg_id, |
| sizeof(pkg_id)); |
| |
| if (img->package_id != ((pkg_id[1] << 8) | pkg_id[0])) { |
| flash_area = MISMATCH; |
| goto exit; |
| } |
| if (img->package_revision_id != |
| ((pkg_id[3] << 8) | pkg_id[2])) { |
| flash_area = MISMATCH; |
| goto exit; |
| } |
| } |
| |
| /* check firmware size */ |
| if (fwu->fw_block_count*fwu->block_size != img->image_size) { |
| dev_err(&i2c_client->dev, |
| "%s: firmware size of device (%d) != .img (%d)\n", |
| __func__, |
| fwu->config_block_count * fwu->block_size, |
| img->image_size); |
| flash_area = NONE; |
| goto exit; |
| } |
| |
| /* check config size */ |
| if (fwu->config_block_count*fwu->block_size != img->config_size) { |
| dev_err(&i2c_client->dev, |
| "%s: config size of device (%d) != .img (%d)\n", |
| __func__, |
| fwu->config_block_count * fwu->block_size, |
| img->config_size); |
| flash_area = NONE; |
| goto exit; |
| } |
| |
| retval = fwu_read_f01_device_status(&f01_device_status); |
| if (retval < 0) { |
| flash_area = NONE; |
| goto exit; |
| } |
| |
| /* Force update firmware when device is in bootloader mode */ |
| if (f01_device_status.flash_prog) { |
| dev_info(&i2c_client->dev, |
| "%s: In flash prog mode\n", |
| __func__); |
| flash_area = UI_FIRMWARE; |
| goto exit; |
| } |
| |
| /* device firmware id */ |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.query_base_addr + 18, |
| firmware_id, |
| sizeof(firmware_id)); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read firmware ID (code %d).\n", |
| __func__, retval); |
| goto exit; |
| } |
| firmware_id[3] = 0; |
| deviceFirmwareID = extract_uint(firmware_id); |
| |
| /* .img firmware id */ |
| if (img->is_contain_build_info) { |
| dev_err(&i2c_client->dev, |
| "%s: Image option contains build info.\n", |
| __func__); |
| imageFirmwareID = img->firmware_id; |
| } else { |
| if (!fwu->image_name) { |
| dev_info(&i2c_client->dev, |
| "%s: Unknown image file name\n", |
| __func__); |
| flash_area = UI_FIRMWARE; |
| goto exit; |
| } |
| strptr = strnstr(fwu->image_name, "PR", |
| sizeof(fwu->image_name)); |
| if (!strptr) { |
| dev_err(&i2c_client->dev, |
| "No valid PR number (PRxxxxxxx)" \ |
| "found in image file name...\n"); |
| goto exit; |
| } |
| |
| strptr += 2; |
| while (strptr[index] >= '0' && strptr[index] <= '9') { |
| imagePR[index] = strptr[index]; |
| index++; |
| } |
| imagePR[index] = 0; |
| |
| retval = kstrtoul(imagePR, 10, &imageFirmwareID); |
| if (retval == -EINVAL) { |
| dev_err(&i2c_client->dev, |
| "invalid image firmware id...\n"); |
| goto exit; |
| } |
| } |
| |
| dev_dbg(&i2c_client->dev, |
| "Device firmware id %d, .img firmware id %d\n", |
| deviceFirmwareID, |
| (unsigned int)imageFirmwareID); |
| if (imageFirmwareID > deviceFirmwareID) { |
| flash_area = UI_FIRMWARE; |
| goto exit; |
| } else if (imageFirmwareID < deviceFirmwareID) { |
| flash_area = NONE; |
| dev_info(&i2c_client->dev, |
| "%s: Img fw is older than device fw. Skip fw update.\n", |
| __func__); |
| goto exit; |
| } |
| |
| /* device config id */ |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f34_fd.ctrl_base_addr, |
| config_id, |
| sizeof(config_id)); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read config ID (code %d).\n", |
| __func__, retval); |
| flash_area = NONE; |
| goto exit; |
| } |
| deviceConfigID = extract_uint_be(config_id); |
| |
| dev_dbg(&i2c_client->dev, |
| "Device config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n", |
| config_id[0], config_id[1], config_id[2], config_id[3]); |
| |
| /* .img config id */ |
| dev_dbg(&i2c_client->dev, |
| ".img config ID 0x%02X, 0x%02X, 0x%02X, 0x%02X\n", |
| fwu->config_data[0], |
| fwu->config_data[1], |
| fwu->config_data[2], |
| fwu->config_data[3]); |
| imageConfigID = extract_uint_be(fwu->config_data); |
| |
| dev_dbg(&i2c_client->dev, |
| "%s: Device config ID %d, .img config ID %d\n", |
| __func__, deviceConfigID, imageConfigID); |
| |
| if (imageConfigID > deviceConfigID) { |
| flash_area = CONFIG_AREA; |
| goto exit; |
| } |
| exit: |
| kfree(imagePR); |
| if (flash_area == MISMATCH) |
| dev_info(&i2c_client->dev, |
| "%s: Package ID indicates mismatch of firmware and" \ |
| " controller compatibility\n", __func__); |
| else if (flash_area == NONE) |
| dev_info(&i2c_client->dev, |
| "%s: Nothing needs to be updated\n", __func__); |
| else |
| dev_info(&i2c_client->dev, |
| "%s: Update %s block\n", __func__, |
| flash_area == UI_FIRMWARE ? "UI FW" : "CONFIG"); |
| return flash_area; |
| } |
| |
| static int fwu_scan_pdt(void) |
| { |
| int retval; |
| unsigned char ii; |
| unsigned char intr_count = 0; |
| unsigned char intr_off; |
| unsigned char intr_src; |
| unsigned short addr; |
| bool f01found = false; |
| bool f34found = false; |
| struct synaptics_rmi4_fn_desc rmi_fd; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, "Scan PDT\n"); |
| |
| for (addr = PDT_START; addr > PDT_END; addr -= PDT_ENTRY_SIZE) { |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| addr, |
| (unsigned char *)&rmi_fd, |
| sizeof(rmi_fd)); |
| if (retval < 0) |
| return retval; |
| |
| if (rmi_fd.fn_number) { |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Found F%02x\n", |
| __func__, rmi_fd.fn_number); |
| switch (rmi_fd.fn_number) { |
| case SYNAPTICS_RMI4_F01: |
| f01found = true; |
| fwu->f01_fd = rmi_fd; |
| fwu->addr_f01_interrupt_register = |
| fwu->f01_fd.data_base_addr + 1; |
| break; |
| case SYNAPTICS_RMI4_F34: |
| f34found = true; |
| fwu->f34_fd = rmi_fd; |
| fwu->intr_mask = 0; |
| intr_src = rmi_fd.intr_src_count; |
| intr_off = intr_count % 8; |
| for (ii = intr_off; |
| ii < ((intr_src & MASK_3BIT) + |
| intr_off); |
| ii++) |
| fwu->intr_mask |= 1 << ii; |
| break; |
| } |
| } else |
| break; |
| |
| intr_count += (rmi_fd.intr_src_count & MASK_3BIT); |
| } |
| |
| if (!f01found || !f34found) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to find both F01 and F34\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| fwu_read_interrupt_status(); |
| return 0; |
| } |
| |
| static int fwu_write_blocks(unsigned char *block_ptr, unsigned short block_cnt, |
| unsigned char command) |
| { |
| int retval; |
| unsigned char flash_status; |
| unsigned char block_offset[] = {0, 0}; |
| unsigned short block_num; |
| unsigned short addr_block_data = fwu_get_address(OFFSET_BLOCK_DATA); |
| unsigned short addr_block_num = fwu_get_address(OFFSET_BLOCK_NUMBER); |
| struct i2c_client *i2c_client = fwu->rmi4_data->i2c_client; |
| #ifdef SHOW_PROGRESS |
| unsigned int progress; |
| unsigned char command_str[10]; |
| switch (command) { |
| case CMD_WRITE_CONFIG_BLOCK: |
| progress = 10; |
| strlcpy(command_str, "config", 10); |
| break; |
| case CMD_WRITE_FW_BLOCK: |
| progress = 100; |
| strlcpy(command_str, "firmware", 10); |
| break; |
| case CMD_WRITE_LOCKDOWN_BLOCK: |
| progress = 1; |
| strlcpy(command_str, "lockdown", 10); |
| break; |
| default: |
| progress = 1; |
| strlcpy(command_str, "unknown", 10); |
| break; |
| } |
| #endif |
| |
| dev_dbg(&i2c_client->dev, |
| "%s: Start to update %s blocks\n", |
| __func__, |
| command_str); |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| addr_block_num, |
| block_offset, |
| sizeof(block_offset)); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to write to block number registers\n", |
| __func__); |
| return retval; |
| } |
| |
| for (block_num = 0; block_num < block_cnt; block_num++) { |
| #ifdef SHOW_PROGRESS |
| if (block_num % progress == 0) |
| dev_info(&i2c_client->dev, |
| "%s: update %s %3d / %3d\n", |
| __func__, |
| command_str, |
| block_num, block_cnt); |
| #endif |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| addr_block_data, |
| block_ptr, |
| fwu->block_size); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to write block data (block %d)\n", |
| __func__, block_num); |
| return retval; |
| } |
| |
| retval = fwu_write_f34_command(command); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to write command for block %d\n", |
| __func__, block_num); |
| return retval; |
| } |
| |
| retval = fwu_wait_for_idle(WRITE_WAIT_MS); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to wait for idle status (block %d)\n", |
| __func__, block_num); |
| return retval; |
| } |
| |
| #if CHECK_FLASH_BLOCK_STATUS |
| retval = fwu_read_f34_flash_status(&flash_status); |
| if (retval < 0) { |
| dev_err(&i2c_client->dev, |
| "%s: Failed to read flash status (block %d)\n", |
| __func__, block_num); |
| return retval; |
| } |
| if (flash_status != 0x00) { |
| dev_err(&i2c_client->dev, |
| "%s: Flash block %d failed, status 0x%02X\n", |
| __func__, block_num, flash_status); |
| return -EINVAL; |
| } |
| #endif |
| block_ptr += fwu->block_size; |
| } |
| #ifdef SHOW_PROGRESS |
| dev_info(&i2c_client->dev, |
| "%s: update %s %3d / %3d\n", |
| __func__, |
| command_str, |
| block_cnt, block_cnt); |
| #endif |
| return 0; |
| } |
| |
| static int fwu_write_firmware(void) |
| { |
| return fwu_write_blocks((unsigned char *)fwu->firmware_data, |
| fwu->fw_block_count, CMD_WRITE_FW_BLOCK); |
| } |
| |
| static int fwu_write_configuration(void) |
| { |
| return fwu_write_blocks((unsigned char *)fwu->config_data, |
| fwu->config_block_count, CMD_WRITE_CONFIG_BLOCK); |
| } |
| |
| static int fwu_write_lockdown_block(void) |
| { |
| return fwu_write_blocks((unsigned char *)fwu->lockdown_data, |
| fwu->lockdown_block_count, CMD_WRITE_LOCKDOWN_BLOCK); |
| } |
| |
| static int fwu_write_bootloader_id(void) |
| { |
| int retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "Write bootloader ID 0x%02X 0x%02X\n", |
| fwu->bootloader_id[0], |
| fwu->bootloader_id[1]); |
| |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| fwu_get_address(OFFSET_BLOCK_DATA), |
| fwu->bootloader_id, |
| sizeof(fwu->bootloader_id)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write bootloader ID\n", |
| __func__); |
| return retval; |
| } |
| |
| return 0; |
| } |
| |
| static int fwu_enter_flash_prog(bool force) |
| { |
| int retval; |
| struct f01_device_status f01_device_status; |
| struct f01_device_control f01_device_control; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, "Enter bootloader mode\n"); |
| |
| retval = fwu_read_f01_device_status(&f01_device_status); |
| if (retval < 0) |
| return retval; |
| |
| if (force) { |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Force to enter flash prog mode\n", |
| __func__); |
| } else if (f01_device_status.flash_prog) { |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Already in flash prog mode\n", |
| __func__); |
| return 0; |
| } |
| |
| retval = fwu_write_bootloader_id(); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu_write_f34_command(CMD_ENABLE_FLASH_PROG); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu_wait_for_idle(ENABLE_WAIT_MS); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu_scan_pdt(); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu_read_f01_device_status(&f01_device_status); |
| if (retval < 0) |
| return retval; |
| |
| if (!f01_device_status.flash_prog) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Not in flash prog mode\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| retval = fwu_read_f34_queries(); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.ctrl_base_addr, |
| f01_device_control.data, |
| sizeof(f01_device_control.data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read F01 device control\n", |
| __func__); |
| return retval; |
| } |
| |
| f01_device_control.nosleep = true; |
| f01_device_control.sleep_mode = SLEEP_MODE_NORMAL; |
| |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| fwu->f01_fd.ctrl_base_addr, |
| f01_device_control.data, |
| sizeof(f01_device_control.data)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write F01 device control\n", |
| __func__); |
| return retval; |
| } |
| fwu->polling_mode = false; |
| return retval; |
| } |
| |
| static int fwu_do_write_config(void) |
| { |
| int retval; |
| |
| retval = fwu_enter_flash_prog(false); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Entered flash prog mode\n", |
| __func__); |
| |
| if (fwu->config_area == PERM_CONFIG_AREA) { |
| fwu->config_block_count = fwu->perm_config_block_count; |
| goto write_config; |
| } |
| |
| retval = fwu_write_bootloader_id(); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Bootloader ID written\n", |
| __func__); |
| |
| switch (fwu->config_area) { |
| case UI_CONFIG_AREA: |
| retval = fwu_write_f34_command(CMD_ERASE_CONFIG); |
| break; |
| case BL_CONFIG_AREA: |
| retval = fwu_write_f34_command(CMD_ERASE_BL_CONFIG); |
| fwu->config_block_count = fwu->bl_config_block_count; |
| break; |
| case DISP_CONFIG_AREA: |
| retval = fwu_write_f34_command(CMD_ERASE_DISP_CONFIG); |
| fwu->config_block_count = fwu->disp_config_block_count; |
| break; |
| } |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Erase command written\n", |
| __func__); |
| |
| retval = fwu_wait_for_idle(ERASE_WAIT_MS); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Idle status detected\n", |
| __func__); |
| |
| write_config: |
| retval = fwu_write_configuration(); |
| if (retval < 0) |
| return retval; |
| |
| pr_notice("%s: Config written\n", __func__); |
| |
| return retval; |
| } |
| |
| static int fwu_start_write_config(void) |
| { |
| int retval; |
| int block_count; |
| |
| switch (fwu->config_area) { |
| case UI_CONFIG_AREA: |
| block_count = fwu->config_block_count; |
| break; |
| case PERM_CONFIG_AREA: |
| if (!fwu->flash_properties.has_perm_config) |
| return -EINVAL; |
| block_count = fwu->perm_config_block_count; |
| break; |
| case BL_CONFIG_AREA: |
| if (!fwu->flash_properties.has_bl_config) |
| return -EINVAL; |
| block_count = fwu->bl_config_block_count; |
| break; |
| case DISP_CONFIG_AREA: |
| if (!fwu->flash_properties.has_display_config) |
| return -EINVAL; |
| block_count = fwu->disp_config_block_count; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (fwu->image_size == block_count*fwu->block_size) { |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: write config from config file\n", |
| __func__); |
| fwu->config_data = fwu->data_buffer; |
| } else { |
| parse_header(); |
| } |
| |
| pr_notice("%s: Start of write config process\n", __func__); |
| |
| retval = fwu_do_write_config(); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write config\n", |
| __func__); |
| } |
| |
| fwu->rmi4_data->reset_device(fwu->rmi4_data); |
| |
| pr_notice("%s: End of write config process\n", __func__); |
| |
| return retval; |
| } |
| |
| static int fwu_do_write_lockdown(bool reset) |
| { |
| int retval; |
| |
| pr_notice("%s: Start of lockdown process\n", __func__); |
| |
| retval = fwu_enter_flash_prog(false); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Entered flash prog mode\n", |
| __func__); |
| |
| if (fwu->flash_properties.unlocked == 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Device has been locked!\n", |
| __func__); |
| if (reset) |
| goto exit; |
| else |
| return -EINVAL; |
| } |
| |
| retval = fwu_write_lockdown_block(); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s:Lockdown device\n", |
| __func__); |
| |
| exit: |
| if (reset) |
| retval = fwu->rmi4_data->reset_device(fwu->rmi4_data); |
| else |
| retval = fwu_enter_flash_prog(true); |
| |
| if (retval < 0) |
| return retval; |
| |
| pr_notice("%s: End of lockdown process\n", __func__); |
| |
| return retval; |
| } |
| |
| static int fwu_start_write_lockdown(void) |
| { |
| parse_header(); |
| return fwu_do_write_lockdown(true); |
| } |
| |
| static int fwu_do_read_config(void) |
| { |
| int retval; |
| unsigned char block_offset[] = {0, 0}; |
| unsigned short block_num; |
| unsigned short block_count; |
| unsigned short index = 0; |
| |
| switch (fwu->config_area) { |
| case UI_CONFIG_AREA: |
| block_count = fwu->config_block_count; |
| break; |
| case PERM_CONFIG_AREA: |
| if (!fwu->flash_properties.has_perm_config) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| block_count = fwu->perm_config_block_count; |
| break; |
| case BL_CONFIG_AREA: |
| if (!fwu->flash_properties.has_bl_config) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| block_count = fwu->bl_config_block_count; |
| break; |
| case DISP_CONFIG_AREA: |
| if (!fwu->flash_properties.has_display_config) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| block_count = fwu->disp_config_block_count; |
| break; |
| default: |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| fwu->config_size = fwu->block_size * block_count; |
| |
| kfree(fwu->read_config_buf); |
| fwu->read_config_buf = kzalloc(fwu->config_size, GFP_KERNEL); |
| |
| block_offset[1] |= (fwu->config_area << 5); |
| |
| retval = fwu->fn_ptr->write(fwu->rmi4_data, |
| fwu_get_address(OFFSET_BLOCK_NUMBER), |
| block_offset, |
| sizeof(block_offset)); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write to block number registers\n", |
| __func__); |
| goto exit; |
| } |
| |
| for (block_num = 0; block_num < block_count; block_num++) { |
| retval = fwu_write_f34_command(CMD_READ_CONFIG_BLOCK); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to write read config command\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = fwu_wait_for_idle(WRITE_WAIT_MS); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to wait for idle status\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu_get_address(OFFSET_BLOCK_DATA), |
| &fwu->read_config_buf[index], |
| fwu->block_size); |
| if (retval < 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to read block data (block %d)\n", |
| __func__, block_num); |
| goto exit; |
| } |
| |
| index += fwu->block_size; |
| } |
| |
| exit: |
| return retval; |
| } |
| |
| static int fwu_do_reflash(void) |
| { |
| int retval; |
| unsigned char flash_status; |
| |
| if (fwu->do_lockdown) { |
| retval = fwu_do_write_lockdown(false); |
| if (retval < 0) |
| dev_warn(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Skip lockdown process.\n", |
| __func__); |
| } |
| retval = fwu_enter_flash_prog(false); |
| if (retval < 0) |
| return retval; |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Entered flash prog mode\n", |
| __func__); |
| |
| retval = fwu_write_bootloader_id(); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Bootloader ID written\n", |
| __func__); |
| |
| retval = fwu_write_f34_command(CMD_ERASE_ALL); |
| if (retval < 0) |
| return retval; |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Erase all command written\n", |
| __func__); |
| |
| if (fwu->polling_mode) |
| msleep(100); |
| |
| retval = fwu_wait_for_idle(ERASE_WAIT_MS); |
| if (retval < 0) |
| return retval; |
| |
| retval = fwu_read_f34_flash_status(&flash_status); |
| if (retval < 0) |
| return retval; |
| if (flash_status != 0x00) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Erase all command failed, status 0x%02X\n", |
| __func__, flash_status); |
| return -EINVAL; |
| } |
| |
| if (fwu->firmware_data) { |
| retval = fwu_write_firmware(); |
| if (retval < 0) |
| return retval; |
| pr_notice("%s: Firmware programmed\n", __func__); |
| } |
| |
| if (fwu->config_data) { |
| retval = fwu_write_configuration(); |
| if (retval < 0) |
| return retval; |
| pr_notice("%s: Configuration programmed\n", __func__); |
| } |
| |
| return retval; |
| } |
| |
| static int fwu_start_reflash(void) |
| { |
| int retval = 0; |
| const struct firmware *fw_entry = NULL; |
| struct f01_device_status f01_device_status; |
| enum flash_area flash_area; |
| |
| pr_notice("%s: Start of reflash process\n", __func__); |
| |
| if (fwu->ext_data_source) |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s Load .img file from commandline.\n", |
| __func__); |
| else { |
| if (strnlen(fwu->rmi4_data->fw_image_name, |
| NAME_BUFFER_SIZE) == 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "Firmware image name not given, "\ |
| "skipping update\n"); |
| return 0; |
| } |
| |
| if (strnlen(fwu->rmi4_data->fw_image_name, NAME_BUFFER_SIZE) == |
| NAME_BUFFER_SIZE) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "Firmware image name exceeds max length " \ |
| "(%d), skipping update\n", NAME_BUFFER_SIZE); |
| return 0; |
| } |
| |
| snprintf(fwu->image_name, NAME_BUFFER_SIZE, "%s", |
| fwu->rmi4_data->fw_image_name); |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Requesting firmware image %s\n", |
| __func__, fwu->image_name); |
| |
| retval = request_firmware(&fw_entry, |
| fwu->image_name, |
| &fwu->rmi4_data->i2c_client->dev); |
| if (retval != 0) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Firmware image %s not available\n", |
| __func__, |
| fwu->image_name); |
| return -EINVAL; |
| } |
| |
| dev_dbg(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Firmware image size = %zu\n", |
| __func__, fw_entry->size); |
| |
| fwu->data_buffer = fw_entry->data; |
| } |
| |
| parse_header(); |
| flash_area = fwu_go_nogo(); |
| |
| if (fwu->rmi4_data->sensor_sleep) { |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Sensor sleeping\n", |
| __func__); |
| retval = -ENODEV; |
| goto exit; |
| } |
| fwu->rmi4_data->stay_awake = true; |
| |
| switch (flash_area) { |
| case NONE: |
| case MISMATCH: |
| retval = 0; |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: No need to do reflash.\n", |
| __func__); |
| goto exit; |
| case UI_FIRMWARE: |
| retval = fwu_do_reflash(); |
| break; |
| case CONFIG_AREA: |
| retval = fwu_do_write_config(); |
| break; |
| default: |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Unknown flash area\n", |
| __func__); |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (retval < 0) |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Failed to do reflash\n", |
| __func__); |
| |
| /* reset device */ |
| fwu_reset_device(); |
| |
| /* check device status */ |
| retval = fwu_read_f01_device_status(&f01_device_status); |
| if (retval < 0) |
| goto exit; |
| |
| dev_info(&fwu->rmi4_data->i2c_client->dev, "Device is in %s mode\n", |
| f01_device_status.flash_prog == 1 ? "bootloader" : "UI"); |
| if (f01_device_status.flash_prog) |
| dev_info(&fwu->rmi4_data->i2c_client->dev, "Flash status %d\n", |
| f01_device_status.status_code); |
| |
| if (f01_device_status.flash_prog) { |
| dev_info(&fwu->rmi4_data->i2c_client->dev, |
| "%s: Device is in flash prog mode 0x%02X\n", |
| __func__, f01_device_status.status_code); |
| } |
| |
| exit: |
| if (fw_entry) |
| release_firmware(fw_entry); |
| |
| pr_notice("%s: End of reflash process\n", __func__); |
| fwu->rmi4_data->stay_awake = false; |
| return retval; |
| } |
| |
| int synaptics_fw_updater(void) |
| { |
| int retval; |
| |
| if (!fwu) |
| return -ENODEV; |
| |
| if (!fwu->initialized) |
| return -ENODEV; |
| |
| fwu->rmi4_data->fw_updating = true; |
| if (fwu->rmi4_data->suspended == true) { |
| fwu->rmi4_data->fw_updating = false; |
| dev_err(&fwu->rmi4_data->i2c_client->dev, |
| "Cannot start fw upgrade while device is in suspend\n"); |
| return -EBUSY; |
| } |
| |
| fwu->config_area = UI_CONFIG_AREA; |
| |
| retval = fwu_start_reflash(); |
| fwu->rmi4_data->fw_updating = false; |
| |
| synaptics_rmi4_update_debug_info(); |
| |
| return retval; |
| } |
| EXPORT_SYMBOL(synaptics_fw_updater); |
| |
| static ssize_t fwu_sysfs_show_image(struct file *data_file, |
| struct kobject *kobj, struct bin_attribute *attributes, |
| char *buf, loff_t pos, size_t count) |
| { |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (count < fwu->config_size) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Not enough space (%zu bytes) in buffer\n", |
| __func__, count); |
| return -EINVAL; |
| } |
| |
| memcpy(buf, fwu->read_config_buf, fwu->config_size); |
| |
| return fwu->config_size; |
| } |
| |
| static ssize_t fwu_sysfs_store_image(struct file *data_file, |
| struct kobject *kobj, struct bin_attribute *attributes, |
| char *buf, loff_t pos, size_t count) |
| { |
| memcpy((void *)(&fwu->ext_data_source[fwu->data_pos]), |
| (const void *)buf, |
| count); |
| |
| fwu->data_buffer = fwu->ext_data_source; |
| fwu->data_pos += count; |
| |
| return count; |
| } |
| |
| static ssize_t fwu_sysfs_image_name_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| char *strptr; |
| |
| if (count >= NAME_BUFFER_SIZE) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "Input over %d characters long\n", NAME_BUFFER_SIZE); |
| return -EINVAL; |
| } |
| |
| strptr = strnstr(buf, ".img", |
| count); |
| if (!strptr) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "Input is not valid .img file\n"); |
| return -EINVAL; |
| } |
| |
| strlcpy(rmi4_data->fw_image_name, buf, count); |
| return count; |
| } |
| |
| static ssize_t fwu_sysfs_image_name_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| if (strnlen(fwu->rmi4_data->fw_image_name, NAME_BUFFER_SIZE) > 0) |
| return snprintf(buf, PAGE_SIZE, "%s\n", |
| fwu->rmi4_data->fw_image_name); |
| else |
| return snprintf(buf, PAGE_SIZE, "No firmware name given\n"); |
| } |
| |
| static ssize_t fwu_sysfs_force_reflash_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned int input; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (sscanf(buf, "%u", &input) != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (input != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| if (LOCKDOWN) |
| fwu->do_lockdown = true; |
| |
| fwu->force_update = true; |
| retval = synaptics_fw_updater(); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to do reflash\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = count; |
| |
| exit: |
| kfree(fwu->ext_data_source); |
| fwu->ext_data_source = NULL; |
| fwu->force_update = FORCE_UPDATE; |
| fwu->do_lockdown = rmi4_data->board->do_lockdown; |
| return retval; |
| } |
| |
| static ssize_t fwu_sysfs_do_reflash_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned int input; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (sscanf(buf, "%u", &input) != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (input & LOCKDOWN) { |
| fwu->do_lockdown = true; |
| input &= ~LOCKDOWN; |
| } |
| |
| if ((input != NORMAL) && (input != FORCE)) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (input == FORCE) |
| fwu->force_update = true; |
| |
| retval = synaptics_fw_updater(); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to do reflash\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = count; |
| |
| exit: |
| kfree(fwu->ext_data_source); |
| fwu->ext_data_source = NULL; |
| fwu->force_update = FORCE_UPDATE; |
| fwu->do_lockdown = rmi4_data->board->do_lockdown; |
| return retval; |
| } |
| |
| static ssize_t fwu_sysfs_write_lockdown_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned int input; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (sscanf(buf, "%u", &input) != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (input != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| retval = fwu_start_write_lockdown(); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to write lockdown block\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = count; |
| |
| exit: |
| kfree(fwu->ext_data_source); |
| fwu->ext_data_source = NULL; |
| fwu->force_update = FORCE_UPDATE; |
| fwu->do_lockdown = rmi4_data->board->do_lockdown; |
| return retval; |
| } |
| |
| static ssize_t fwu_sysfs_write_config_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned int input; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (sscanf(buf, "%u", &input) != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| if (input != 1) { |
| retval = -EINVAL; |
| goto exit; |
| } |
| |
| retval = fwu_start_write_config(); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to write config\n", |
| __func__); |
| goto exit; |
| } |
| |
| retval = count; |
| |
| exit: |
| kfree(fwu->ext_data_source); |
| fwu->ext_data_source = NULL; |
| return retval; |
| } |
| |
| static ssize_t fwu_sysfs_read_config_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned int input; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| if (sscanf(buf, "%u", &input) != 1) |
| return -EINVAL; |
| |
| if (input != 1) |
| return -EINVAL; |
| |
| retval = fwu_do_read_config(); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to read config\n", |
| __func__); |
| return retval; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t fwu_sysfs_config_area_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned short config_area; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| retval = kstrtou16(buf, 10, &config_area); |
| if (retval) |
| return retval; |
| |
| if (config_area < 0x00 || config_area > 0x03) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Incorrect value of config_area\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| fwu->config_area = config_area; |
| |
| return count; |
| } |
| |
| static ssize_t fwu_sysfs_image_size_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| int retval; |
| unsigned long size; |
| struct synaptics_rmi4_data *rmi4_data = fwu->rmi4_data; |
| |
| retval = kstrtoul(buf, 10, &size); |
| if (retval) |
| return retval; |
| |
| fwu->image_size = size; |
| fwu->data_pos = 0; |
| |
| kfree(fwu->ext_data_source); |
| fwu->ext_data_source = kzalloc(fwu->image_size, GFP_KERNEL); |
| if (!fwu->ext_data_source) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to alloc mem for image data\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| return count; |
| } |
| |
| static ssize_t fwu_sysfs_block_size_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->block_size); |
| } |
| |
| static ssize_t fwu_sysfs_firmware_block_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->fw_block_count); |
| } |
| |
| static ssize_t fwu_sysfs_configuration_block_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->config_block_count); |
| } |
| |
| static ssize_t fwu_sysfs_perm_config_block_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->perm_config_block_count); |
| } |
| |
| static ssize_t fwu_sysfs_bl_config_block_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->bl_config_block_count); |
| } |
| |
| static ssize_t fwu_sysfs_disp_config_block_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%u\n", fwu->disp_config_block_count); |
| } |
| |
| static ssize_t fwu_sysfs_config_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned char config_id[4]; |
| /* device config id */ |
| fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f34_fd.ctrl_base_addr, |
| config_id, |
| sizeof(config_id)); |
| |
| return snprintf(buf, PAGE_SIZE, "%d.%d.%d.%d\n", |
| config_id[0], config_id[1], config_id[2], config_id[3]); |
| } |
| |
| static ssize_t fwu_sysfs_package_id_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| unsigned char pkg_id[4]; |
| /* read device package id */ |
| fwu->fn_ptr->read(fwu->rmi4_data, |
| fwu->f01_fd.query_base_addr + 17, |
| pkg_id, |
| sizeof(pkg_id)); |
| |
| return snprintf(buf, PAGE_SIZE, "%d rev %d\n", |
| (pkg_id[1] << 8) | pkg_id[0], |
| (pkg_id[3] << 8) | pkg_id[2]); |
| } |
| |
| static int synaptics_rmi4_debug_dump_info(struct seq_file *m, void *v) |
| { |
| seq_printf(m, "%s\n", fwu->ts_info); |
| |
| return 0; |
| } |
| |
| static int debugfs_dump_info_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, synaptics_rmi4_debug_dump_info, |
| inode->i_private); |
| } |
| |
| static const struct file_operations debug_dump_info_fops = { |
| .owner = THIS_MODULE, |
| .open = debugfs_dump_info_open, |
| .read = seq_read, |
| .release = single_release, |
| }; |
| |
| static void synaptics_rmi4_fwu_attn(struct synaptics_rmi4_data *rmi4_data, |
| unsigned char intr_mask) |
| { |
| if (!fwu) |
| return; |
| |
| if (fwu->intr_mask & intr_mask) |
| fwu->interrupt_flag = true; |
| |
| return; |
| } |
| |
| static struct bin_attribute dev_attr_data = { |
| .attr = { |
| .name = "data", |
| .mode = (S_IRUGO | S_IWUSR | S_IWGRP), |
| }, |
| .size = 0, |
| .read = fwu_sysfs_show_image, |
| .write = fwu_sysfs_store_image, |
| }; |
| |
| static struct device_attribute attrs[] = { |
| __ATTR(fw_name, S_IRUGO | S_IWUSR | S_IWGRP, |
| fwu_sysfs_image_name_show, |
| fwu_sysfs_image_name_store), |
| __ATTR(force_update_fw, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_force_reflash_store), |
| __ATTR(update_fw, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_do_reflash_store), |
| __ATTR(writeconfig, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_write_config_store), |
| __ATTR(writelockdown, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_write_lockdown_store), |
| __ATTR(readconfig, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_read_config_store), |
| __ATTR(configarea, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_config_area_store), |
| __ATTR(imagesize, S_IWUSR | S_IWGRP, |
| NULL, |
| fwu_sysfs_image_size_store), |
| __ATTR(blocksize, S_IRUGO, |
| fwu_sysfs_block_size_show, |
| synaptics_rmi4_store_error), |
| __ATTR(fwblockcount, S_IRUGO, |
| fwu_sysfs_firmware_block_count_show, |
| synaptics_rmi4_store_error), |
| __ATTR(configblockcount, S_IRUGO, |
| fwu_sysfs_configuration_block_count_show, |
| synaptics_rmi4_store_error), |
| __ATTR(permconfigblockcount, S_IRUGO, |
| fwu_sysfs_perm_config_block_count_show, |
| synaptics_rmi4_store_error), |
| __ATTR(blconfigblockcount, S_IRUGO, |
| fwu_sysfs_bl_config_block_count_show, |
| synaptics_rmi4_store_error), |
| __ATTR(dispconfigblockcount, S_IRUGO, |
| fwu_sysfs_disp_config_block_count_show, |
| synaptics_rmi4_store_error), |
| __ATTR(config_id, S_IRUGO, |
| fwu_sysfs_config_id_show, |
| synaptics_rmi4_store_error), |
| __ATTR(package_id, S_IRUGO, |
| fwu_sysfs_package_id_show, |
| synaptics_rmi4_store_error), |
| }; |
| |
| |
| static void synaptics_rmi4_fwu_work(struct work_struct *work) |
| { |
| fwu_start_reflash(); |
| } |
| |
| static int synaptics_rmi4_fwu_init(struct synaptics_rmi4_data *rmi4_data) |
| { |
| int retval; |
| unsigned char attr_count; |
| struct pdt_properties pdt_props; |
| struct dentry *temp; |
| |
| fwu = kzalloc(sizeof(*fwu), GFP_KERNEL); |
| if (!fwu) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to alloc mem for fwu\n", |
| __func__); |
| retval = -ENOMEM; |
| goto exit; |
| } |
| |
| fwu->fn_ptr = kzalloc(sizeof(*(fwu->fn_ptr)), GFP_KERNEL); |
| if (!fwu->fn_ptr) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to alloc mem for fn_ptr\n", |
| __func__); |
| retval = -ENOMEM; |
| goto exit_free_fwu; |
| } |
| |
| fwu->rmi4_data = rmi4_data; |
| fwu->fn_ptr->read = rmi4_data->i2c_read; |
| fwu->fn_ptr->write = rmi4_data->i2c_write; |
| fwu->fn_ptr->enable = rmi4_data->irq_enable; |
| |
| retval = fwu->fn_ptr->read(rmi4_data, |
| PDT_PROPS, |
| pdt_props.data, |
| sizeof(pdt_props.data)); |
| if (retval < 0) { |
| dev_dbg(&rmi4_data->i2c_client->dev, |
| "%s: Failed to read PDT properties, assuming 0x00\n", |
| __func__); |
| goto exit_free_mem; |
| } else if (pdt_props.has_bsr) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Reflash for LTS not currently supported\n", |
| __func__); |
| retval = -EINVAL; |
| goto exit_free_mem; |
| } |
| |
| retval = fwu_scan_pdt(); |
| if (retval < 0) |
| goto exit_free_mem; |
| |
| fwu->productinfo1 = rmi4_data->rmi4_mod_info.product_info[0]; |
| fwu->productinfo2 = rmi4_data->rmi4_mod_info.product_info[1]; |
| |
| memcpy(fwu->product_id, rmi4_data->rmi4_mod_info.product_id_string, |
| SYNAPTICS_RMI4_PRODUCT_ID_SIZE); |
| fwu->product_id[SYNAPTICS_RMI4_PRODUCT_ID_SIZE] = 0; |
| |
| dev_dbg(&rmi4_data->i2c_client->dev, |
| "%s: F01 product info: 0x%04x 0x%04x\n", |
| __func__, fwu->productinfo1, fwu->productinfo2); |
| dev_dbg(&rmi4_data->i2c_client->dev, |
| "%s: F01 product ID: %s\n", |
| __func__, fwu->product_id); |
| |
| retval = fwu_read_f34_queries(); |
| if (retval < 0) |
| goto exit_free_mem; |
| |
| fwu->initialized = true; |
| fwu->force_update = FORCE_UPDATE; |
| fwu->do_lockdown = rmi4_data->board->do_lockdown; |
| fwu->initialized = true; |
| fwu->polling_mode = false; |
| |
| retval = sysfs_create_bin_file(&rmi4_data->i2c_client->dev.kobj, |
| &dev_attr_data); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to create sysfs bin file\n", |
| __func__); |
| goto exit_free_mem; |
| } |
| |
| for (attr_count = 0; attr_count < ARRAY_SIZE(attrs); attr_count++) { |
| retval = sysfs_create_file(&rmi4_data->i2c_client->dev.kobj, |
| &attrs[attr_count].attr); |
| if (retval < 0) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to create sysfs attributes\n", |
| __func__); |
| retval = -ENODEV; |
| goto exit_remove_attrs; |
| } |
| } |
| |
| temp = debugfs_create_file("dump_info", S_IRUSR | S_IWUSR, |
| fwu->rmi4_data->dir, fwu->rmi4_data, |
| &debug_dump_info_fops); |
| if (temp == NULL || IS_ERR(temp)) { |
| dev_err(&rmi4_data->i2c_client->dev, |
| "%s: Failed to create debugfs dump info file\n", |
| __func__); |
| retval = PTR_ERR(temp); |
| goto exit_remove_attrs; |
| } |
| |
| fwu->ts_info = kzalloc(RMI4_INFO_MAX_LEN, GFP_KERNEL); |
| if (!fwu->ts_info) { |
| dev_err(&rmi4_data->i2c_client->dev, "Not enough memory\n"); |
| goto exit_free_ts_info; |
| } |
| |
| synaptics_rmi4_update_debug_info(); |
| |
| #ifdef INSIDE_FIRMWARE_UPDATE |
| fwu->fwu_workqueue = create_singlethread_workqueue("fwu_workqueue"); |
| INIT_DELAYED_WORK(&fwu->fwu_work, synaptics_rmi4_fwu_work); |
| queue_delayed_work(fwu->fwu_workqueue, |
| &fwu->fwu_work, |
| msecs_to_jiffies(1000)); |
| #endif |
| |
| return 0; |
| exit_free_ts_info: |
| debugfs_remove(temp); |
| exit_remove_attrs: |
| for (attr_count--; attr_count >= 0; attr_count--) { |
| sysfs_remove_file(&rmi4_data->input_dev->dev.kobj, |
| &attrs[attr_count].attr); |
| } |
| |
| sysfs_remove_bin_file(&rmi4_data->input_dev->dev.kobj, &dev_attr_data); |
| |
| exit_free_mem: |
| kfree(fwu->fn_ptr); |
| |
| exit_free_fwu: |
| kfree(fwu); |
| fwu = NULL; |
| |
| exit: |
| return retval; |
| } |
| |
| static void synaptics_rmi4_fwu_remove(struct synaptics_rmi4_data *rmi4_data) |
| { |
| unsigned char attr_count; |
| |
| sysfs_remove_bin_file(&rmi4_data->input_dev->dev.kobj, &dev_attr_data); |
| |
| for (attr_count = 0; attr_count < ARRAY_SIZE(attrs); attr_count++) { |
| sysfs_remove_file(&rmi4_data->input_dev->dev.kobj, |
| &attrs[attr_count].attr); |
| } |
| |
| kfree(fwu->read_config_buf); |
| kfree(fwu->fn_ptr); |
| kfree(fwu); |
| |
| complete(&fwu_remove_complete); |
| |
| return; |
| } |
| |
| static int __init rmi4_fw_update_module_init(void) |
| { |
| synaptics_rmi4_new_function(RMI_FW_UPDATER, true, |
| synaptics_rmi4_fwu_init, |
| synaptics_rmi4_fwu_remove, |
| synaptics_rmi4_fwu_attn); |
| return 0; |
| } |
| |
| static void __exit rmi4_fw_update_module_exit(void) |
| { |
| synaptics_rmi4_new_function(RMI_FW_UPDATER, false, |
| synaptics_rmi4_fwu_init, |
| synaptics_rmi4_fwu_remove, |
| synaptics_rmi4_fwu_attn); |
| wait_for_completion(&fwu_remove_complete); |
| return; |
| } |
| |
| module_init(rmi4_fw_update_module_init); |
| module_exit(rmi4_fw_update_module_exit); |
| |
| MODULE_AUTHOR("Synaptics, Inc."); |
| MODULE_DESCRIPTION("RMI4 FW Update Module"); |
| MODULE_LICENSE("GPL v2"); |