| /* Copyright (c) 2011-2013, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/termios.h> |
| #include <mach/msm_smd.h> |
| #include <linux/netdevice.h> |
| #include <mach/bam_dmux.h> |
| #include <linux/debugfs.h> |
| #include <linux/bitops.h> |
| #include <linux/termios.h> |
| |
| #include <mach/usb_gadget_xport.h> |
| #include <linux/usb/msm_hsusb.h> |
| #include <mach/usb_bam.h> |
| |
| #include "u_rmnet.h" |
| |
| #define BAM_N_PORTS 1 |
| #define BAM2BAM_N_PORTS 3 |
| |
| static struct workqueue_struct *gbam_wq; |
| static int n_bam_ports; |
| static int n_bam2bam_ports; |
| static unsigned n_tx_req_queued; |
| static unsigned bam_ch_ids[] = { 8 }; |
| |
| static const char *bam_ch_names[] = { "bam_dmux_ch_8" }; |
| |
| #define BAM_PENDING_LIMIT 220 |
| #define BAM_MUX_TX_PKT_DROP_THRESHOLD 1000 |
| #define BAM_MUX_RX_PKT_FCTRL_EN_TSHOLD 500 |
| #define BAM_MUX_RX_PKT_FCTRL_DIS_TSHOLD 300 |
| #define BAM_MUX_RX_PKT_FLOW_CTRL_SUPPORT 1 |
| |
| #define BAM_MUX_HDR 8 |
| |
| #define BAM_MUX_RX_Q_SIZE 16 |
| #define BAM_MUX_TX_Q_SIZE 200 |
| #define BAM_MUX_RX_REQ_SIZE 2048 /* Must be 1KB aligned */ |
| |
| #define DL_INTR_THRESHOLD 20 |
| |
| unsigned int bam_mux_tx_pkt_drop_thld = BAM_MUX_TX_PKT_DROP_THRESHOLD; |
| module_param(bam_mux_tx_pkt_drop_thld, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_rx_fctrl_en_thld = BAM_MUX_RX_PKT_FCTRL_EN_TSHOLD; |
| module_param(bam_mux_rx_fctrl_en_thld, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_rx_fctrl_support = BAM_MUX_RX_PKT_FLOW_CTRL_SUPPORT; |
| module_param(bam_mux_rx_fctrl_support, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_rx_fctrl_dis_thld = BAM_MUX_RX_PKT_FCTRL_DIS_TSHOLD; |
| module_param(bam_mux_rx_fctrl_dis_thld, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_tx_q_size = BAM_MUX_TX_Q_SIZE; |
| module_param(bam_mux_tx_q_size, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_rx_q_size = BAM_MUX_RX_Q_SIZE; |
| module_param(bam_mux_rx_q_size, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int bam_mux_rx_req_size = BAM_MUX_RX_REQ_SIZE; |
| module_param(bam_mux_rx_req_size, uint, S_IRUGO | S_IWUSR); |
| |
| unsigned int dl_intr_threshold = DL_INTR_THRESHOLD; |
| module_param(dl_intr_threshold, uint, S_IRUGO | S_IWUSR); |
| |
| #define BAM_CH_OPENED BIT(0) |
| #define BAM_CH_READY BIT(1) |
| |
| struct bam_ch_info { |
| unsigned long flags; |
| unsigned id; |
| |
| struct list_head tx_idle; |
| struct sk_buff_head tx_skb_q; |
| |
| struct list_head rx_idle; |
| struct sk_buff_head rx_skb_q; |
| |
| struct gbam_port *port; |
| struct work_struct write_tobam_w; |
| struct work_struct write_tohost_w; |
| |
| struct usb_request *rx_req; |
| struct usb_request *tx_req; |
| |
| u32 src_pipe_idx; |
| u32 dst_pipe_idx; |
| u8 src_connection_idx; |
| u8 dst_connection_idx; |
| enum transport_type trans; |
| struct usb_bam_connect_ipa_params ipa_params; |
| |
| /* stats */ |
| unsigned int pending_with_bam; |
| unsigned int tohost_drp_cnt; |
| unsigned int tomodem_drp_cnt; |
| unsigned int tx_len; |
| unsigned int rx_len; |
| unsigned long to_modem; |
| unsigned long to_host; |
| }; |
| |
| struct gbam_port { |
| unsigned port_num; |
| spinlock_t port_lock_ul; |
| spinlock_t port_lock_dl; |
| |
| struct grmnet *port_usb; |
| struct grmnet *gr; |
| |
| struct bam_ch_info data_ch; |
| |
| struct work_struct connect_w; |
| struct work_struct disconnect_w; |
| }; |
| |
| static struct bam_portmaster { |
| struct gbam_port *port; |
| struct platform_driver pdrv; |
| } bam_ports[BAM_N_PORTS]; |
| |
| struct gbam_port *bam2bam_ports[BAM2BAM_N_PORTS]; |
| static void gbam_start_rx(struct gbam_port *port); |
| static void gbam_start_endless_rx(struct gbam_port *port); |
| static void gbam_start_endless_tx(struct gbam_port *port); |
| static int gbam_peer_reset_cb(void *param); |
| |
| /*---------------misc functions---------------- */ |
| static void gbam_free_requests(struct usb_ep *ep, struct list_head *head) |
| { |
| struct usb_request *req; |
| |
| while (!list_empty(head)) { |
| req = list_entry(head->next, struct usb_request, list); |
| list_del(&req->list); |
| usb_ep_free_request(ep, req); |
| } |
| } |
| |
| static int gbam_alloc_requests(struct usb_ep *ep, struct list_head *head, |
| int num, |
| void (*cb)(struct usb_ep *ep, struct usb_request *), |
| gfp_t flags) |
| { |
| int i; |
| struct usb_request *req; |
| |
| pr_debug("%s: ep:%p head:%p num:%d cb:%p", __func__, |
| ep, head, num, cb); |
| |
| for (i = 0; i < num; i++) { |
| req = usb_ep_alloc_request(ep, flags); |
| if (!req) { |
| pr_debug("%s: req allocated:%d\n", __func__, i); |
| return list_empty(head) ? -ENOMEM : 0; |
| } |
| req->complete = cb; |
| list_add(&req->list, head); |
| } |
| |
| return 0; |
| } |
| /*--------------------------------------------- */ |
| |
| /*------------data_path----------------------------*/ |
| static void gbam_write_data_tohost(struct gbam_port *port) |
| { |
| unsigned long flags; |
| struct bam_ch_info *d = &port->data_ch; |
| struct sk_buff *skb; |
| int ret; |
| struct usb_request *req; |
| struct usb_ep *ep; |
| |
| spin_lock_irqsave(&port->port_lock_dl, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| return; |
| } |
| |
| ep = port->port_usb->in; |
| |
| while (!list_empty(&d->tx_idle)) { |
| skb = __skb_dequeue(&d->tx_skb_q); |
| if (!skb) { |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| return; |
| } |
| req = list_first_entry(&d->tx_idle, |
| struct usb_request, |
| list); |
| req->context = skb; |
| req->buf = skb->data; |
| req->length = skb->len; |
| n_tx_req_queued++; |
| if (n_tx_req_queued == dl_intr_threshold) { |
| req->no_interrupt = 0; |
| n_tx_req_queued = 0; |
| } else { |
| req->no_interrupt = 1; |
| } |
| |
| list_del(&req->list); |
| |
| spin_unlock(&port->port_lock_dl); |
| ret = usb_ep_queue(ep, req, GFP_ATOMIC); |
| spin_lock(&port->port_lock_dl); |
| if (ret) { |
| pr_err("%s: usb epIn failed with %d\n", __func__, ret); |
| list_add(&req->list, &d->tx_idle); |
| dev_kfree_skb_any(skb); |
| break; |
| } |
| d->to_host++; |
| } |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| } |
| |
| static void gbam_write_data_tohost_w(struct work_struct *w) |
| { |
| struct bam_ch_info *d; |
| struct gbam_port *port; |
| |
| d = container_of(w, struct bam_ch_info, write_tohost_w); |
| port = d->port; |
| |
| gbam_write_data_tohost(port); |
| } |
| |
| void gbam_data_recv_cb(void *p, struct sk_buff *skb) |
| { |
| struct gbam_port *port = p; |
| struct bam_ch_info *d = &port->data_ch; |
| unsigned long flags; |
| |
| if (!skb) |
| return; |
| |
| pr_debug("%s: p:%p#%d d:%p skb_len:%d\n", __func__, |
| port, port->port_num, d, skb->len); |
| |
| spin_lock_irqsave(&port->port_lock_dl, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| if (d->tx_skb_q.qlen > bam_mux_tx_pkt_drop_thld) { |
| d->tohost_drp_cnt++; |
| if (printk_ratelimit()) |
| pr_err("%s: tx pkt dropped: tx_drop_cnt:%u\n", |
| __func__, d->tohost_drp_cnt); |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| dev_kfree_skb_any(skb); |
| return; |
| } |
| |
| __skb_queue_tail(&d->tx_skb_q, skb); |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| |
| gbam_write_data_tohost(port); |
| } |
| |
| void gbam_data_write_done(void *p, struct sk_buff *skb) |
| { |
| struct gbam_port *port = p; |
| struct bam_ch_info *d = &port->data_ch; |
| unsigned long flags; |
| |
| if (!skb) |
| return; |
| |
| dev_kfree_skb_any(skb); |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| |
| d->pending_with_bam--; |
| |
| pr_debug("%s: port:%p d:%p tom:%lu pbam:%u, pno:%d\n", __func__, |
| port, d, d->to_modem, |
| d->pending_with_bam, port->port_num); |
| |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| queue_work(gbam_wq, &d->write_tobam_w); |
| } |
| |
| static void gbam_data_write_tobam(struct work_struct *w) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| struct sk_buff *skb; |
| unsigned long flags; |
| int ret; |
| int qlen; |
| |
| d = container_of(w, struct bam_ch_info, write_tobam_w); |
| port = d->port; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| return; |
| } |
| |
| while (d->pending_with_bam < BAM_PENDING_LIMIT) { |
| skb = __skb_dequeue(&d->rx_skb_q); |
| if (!skb) |
| break; |
| |
| d->pending_with_bam++; |
| d->to_modem++; |
| |
| pr_debug("%s: port:%p d:%p tom:%lu pbam:%u pno:%d\n", __func__, |
| port, d, d->to_modem, d->pending_with_bam, |
| port->port_num); |
| |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| ret = msm_bam_dmux_write(d->id, skb); |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| if (ret) { |
| pr_debug("%s: write error:%d\n", __func__, ret); |
| d->pending_with_bam--; |
| d->to_modem--; |
| d->tomodem_drp_cnt++; |
| dev_kfree_skb_any(skb); |
| break; |
| } |
| } |
| |
| qlen = d->rx_skb_q.qlen; |
| |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| if (qlen < BAM_MUX_RX_PKT_FCTRL_DIS_TSHOLD) |
| gbam_start_rx(port); |
| } |
| /*-------------------------------------------------------------*/ |
| |
| static void gbam_epin_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct gbam_port *port = ep->driver_data; |
| struct bam_ch_info *d; |
| struct sk_buff *skb = req->context; |
| int status = req->status; |
| |
| switch (status) { |
| case 0: |
| /* successful completion */ |
| break; |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| /* connection gone */ |
| dev_kfree_skb_any(skb); |
| usb_ep_free_request(ep, req); |
| return; |
| default: |
| pr_err("%s: data tx ep error %d\n", |
| __func__, status); |
| break; |
| } |
| |
| dev_kfree_skb_any(skb); |
| |
| if (!port) |
| return; |
| |
| spin_lock(&port->port_lock_dl); |
| d = &port->data_ch; |
| list_add_tail(&req->list, &d->tx_idle); |
| spin_unlock(&port->port_lock_dl); |
| |
| queue_work(gbam_wq, &d->write_tohost_w); |
| } |
| |
| static void |
| gbam_epout_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct gbam_port *port = ep->driver_data; |
| struct bam_ch_info *d = &port->data_ch; |
| struct sk_buff *skb = req->context; |
| int status = req->status; |
| int queue = 0; |
| |
| switch (status) { |
| case 0: |
| skb_put(skb, req->actual); |
| queue = 1; |
| break; |
| case -ECONNRESET: |
| case -ESHUTDOWN: |
| /* cable disconnection */ |
| dev_kfree_skb_any(skb); |
| req->buf = 0; |
| usb_ep_free_request(ep, req); |
| return; |
| default: |
| if (printk_ratelimit()) |
| pr_err("%s: %s response error %d, %d/%d\n", |
| __func__, ep->name, status, |
| req->actual, req->length); |
| dev_kfree_skb_any(skb); |
| break; |
| } |
| |
| spin_lock(&port->port_lock_ul); |
| if (queue) { |
| __skb_queue_tail(&d->rx_skb_q, skb); |
| queue_work(gbam_wq, &d->write_tobam_w); |
| } |
| |
| /* TODO: Handle flow control gracefully by having |
| * having call back mechanism from bam driver |
| */ |
| if (bam_mux_rx_fctrl_support && |
| d->rx_skb_q.qlen >= bam_mux_rx_fctrl_en_thld) { |
| |
| list_add_tail(&req->list, &d->rx_idle); |
| spin_unlock(&port->port_lock_ul); |
| return; |
| } |
| spin_unlock(&port->port_lock_ul); |
| |
| skb = alloc_skb(bam_mux_rx_req_size + BAM_MUX_HDR, GFP_ATOMIC); |
| if (!skb) { |
| spin_lock(&port->port_lock_ul); |
| list_add_tail(&req->list, &d->rx_idle); |
| spin_unlock(&port->port_lock_ul); |
| return; |
| } |
| skb_reserve(skb, BAM_MUX_HDR); |
| |
| req->buf = skb->data; |
| req->length = bam_mux_rx_req_size; |
| req->context = skb; |
| |
| status = usb_ep_queue(ep, req, GFP_ATOMIC); |
| if (status) { |
| dev_kfree_skb_any(skb); |
| |
| if (printk_ratelimit()) |
| pr_err("%s: data rx enqueue err %d\n", |
| __func__, status); |
| |
| spin_lock(&port->port_lock_ul); |
| list_add_tail(&req->list, &d->rx_idle); |
| spin_unlock(&port->port_lock_ul); |
| } |
| } |
| |
| static void gbam_endless_rx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| int status = req->status; |
| |
| pr_debug("%s status: %d\n", __func__, status); |
| } |
| |
| static void gbam_endless_tx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| int status = req->status; |
| |
| pr_debug("%s status: %d\n", __func__, status); |
| } |
| |
| static void gbam_start_rx(struct gbam_port *port) |
| { |
| struct usb_request *req; |
| struct bam_ch_info *d; |
| struct usb_ep *ep; |
| unsigned long flags; |
| int ret; |
| struct sk_buff *skb; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| return; |
| } |
| |
| d = &port->data_ch; |
| ep = port->port_usb->out; |
| |
| while (port->port_usb && !list_empty(&d->rx_idle)) { |
| |
| if (bam_mux_rx_fctrl_support && |
| d->rx_skb_q.qlen >= bam_mux_rx_fctrl_en_thld) |
| break; |
| |
| req = list_first_entry(&d->rx_idle, struct usb_request, list); |
| |
| skb = alloc_skb(bam_mux_rx_req_size + BAM_MUX_HDR, GFP_ATOMIC); |
| if (!skb) |
| break; |
| skb_reserve(skb, BAM_MUX_HDR); |
| |
| list_del(&req->list); |
| req->buf = skb->data; |
| req->length = bam_mux_rx_req_size; |
| req->context = skb; |
| |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| ret = usb_ep_queue(ep, req, GFP_ATOMIC); |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| if (ret) { |
| dev_kfree_skb_any(skb); |
| |
| if (printk_ratelimit()) |
| pr_err("%s: rx queue failed %d\n", |
| __func__, ret); |
| |
| if (port->port_usb) |
| list_add(&req->list, &d->rx_idle); |
| else |
| usb_ep_free_request(ep, req); |
| break; |
| } |
| } |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| } |
| |
| static void gbam_start_endless_rx(struct gbam_port *port) |
| { |
| struct bam_ch_info *d = &port->data_ch; |
| int status; |
| |
| if (!port->port_usb) { |
| pr_err("%s: port->port_usb is NULL", __func__); |
| return; |
| } |
| |
| pr_debug("%s: enqueue\n", __func__); |
| status = usb_ep_queue(port->port_usb->out, d->rx_req, GFP_ATOMIC); |
| if (status) |
| pr_err("%s: error enqueuing transfer, %d\n", __func__, status); |
| } |
| |
| static void gbam_start_endless_tx(struct gbam_port *port) |
| { |
| struct bam_ch_info *d = &port->data_ch; |
| int status; |
| |
| if (!port->port_usb) { |
| pr_err("%s: port->port_usb is NULL", __func__); |
| return; |
| } |
| |
| pr_debug("%s: enqueue\n", __func__); |
| status = usb_ep_queue(port->port_usb->in, d->tx_req, GFP_ATOMIC); |
| if (status) |
| pr_err("%s: error enqueuing transfer, %d\n", __func__, status); |
| } |
| |
| static void gbam_stop_endless_rx(struct gbam_port *port) |
| { |
| struct bam_ch_info *d = &port->data_ch; |
| int status; |
| |
| if (!port->port_usb) { |
| pr_err("%s: port->port_usb is NULL", __func__); |
| return; |
| } |
| pr_debug("%s: dequeue\n", __func__); |
| |
| status = usb_ep_dequeue(port->port_usb->out, d->rx_req); |
| if (status) |
| pr_err("%s: error dequeuing transfer, %d\n", __func__, status); |
| |
| } |
| static void gbam_stop_endless_tx(struct gbam_port *port) |
| { |
| struct bam_ch_info *d = &port->data_ch; |
| int status; |
| |
| if (!port->port_usb) { |
| pr_err("%s: port->port_usb is NULL", __func__); |
| return; |
| } |
| |
| pr_debug("%s: dequeue\n", __func__); |
| status = usb_ep_dequeue(port->port_usb->in, d->tx_req); |
| if (status) |
| pr_err("%s: error dequeuing transfer, %d\n", __func__, status); |
| } |
| |
| static void gbam_start(void *param, enum usb_bam_pipe_dir dir) |
| { |
| struct gbam_port *port = param; |
| |
| if (dir == USB_TO_PEER_PERIPHERAL) |
| gbam_start_endless_rx(port); |
| else |
| gbam_start_endless_tx(port); |
| } |
| |
| static void gbam_stop(void *param, enum usb_bam_pipe_dir dir) |
| { |
| struct gbam_port *port = param; |
| |
| if (dir == USB_TO_PEER_PERIPHERAL) |
| gbam_stop_endless_rx(port); |
| else |
| gbam_stop_endless_tx(port); |
| } |
| |
| static void gbam_start_io(struct gbam_port *port) |
| { |
| unsigned long flags; |
| struct usb_ep *ep; |
| int ret; |
| struct bam_ch_info *d; |
| |
| pr_debug("%s: port:%p\n", __func__, port); |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| if (!port->port_usb) { |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| return; |
| } |
| |
| d = &port->data_ch; |
| ep = port->port_usb->out; |
| ret = gbam_alloc_requests(ep, &d->rx_idle, bam_mux_rx_q_size, |
| gbam_epout_complete, GFP_ATOMIC); |
| if (ret) { |
| pr_err("%s: rx req allocation failed\n", __func__); |
| return; |
| } |
| |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| spin_lock_irqsave(&port->port_lock_dl, flags); |
| if (!port->port_usb) { |
| gbam_free_requests(ep, &d->rx_idle); |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| return; |
| } |
| ep = port->port_usb->in; |
| ret = gbam_alloc_requests(ep, &d->tx_idle, bam_mux_tx_q_size, |
| gbam_epin_complete, GFP_ATOMIC); |
| if (ret) { |
| pr_err("%s: tx req allocation failed\n", __func__); |
| gbam_free_requests(ep, &d->rx_idle); |
| return; |
| } |
| |
| spin_unlock_irqrestore(&port->port_lock_dl, flags); |
| |
| /* queue out requests */ |
| gbam_start_rx(port); |
| } |
| |
| static void gbam_notify(void *p, int event, unsigned long data) |
| { |
| switch (event) { |
| case BAM_DMUX_RECEIVE: |
| gbam_data_recv_cb(p, (struct sk_buff *)(data)); |
| break; |
| case BAM_DMUX_WRITE_DONE: |
| gbam_data_write_done(p, (struct sk_buff *)(data)); |
| break; |
| } |
| } |
| |
| static void gbam_free_buffers(struct gbam_port *port) |
| { |
| struct sk_buff *skb; |
| unsigned long flags; |
| struct bam_ch_info *d; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| |
| if (!port || !port->port_usb) |
| goto free_buf_out; |
| |
| d = &port->data_ch; |
| |
| gbam_free_requests(port->port_usb->in, &d->tx_idle); |
| gbam_free_requests(port->port_usb->out, &d->rx_idle); |
| |
| while ((skb = __skb_dequeue(&d->tx_skb_q))) |
| dev_kfree_skb_any(skb); |
| |
| while ((skb = __skb_dequeue(&d->rx_skb_q))) |
| dev_kfree_skb_any(skb); |
| |
| free_buf_out: |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| } |
| |
| static void gbam_disconnect_work(struct work_struct *w) |
| { |
| struct gbam_port *port = |
| container_of(w, struct gbam_port, disconnect_w); |
| struct bam_ch_info *d = &port->data_ch; |
| |
| if (!test_bit(BAM_CH_OPENED, &d->flags)) |
| return; |
| |
| msm_bam_dmux_close(d->id); |
| clear_bit(BAM_CH_OPENED, &d->flags); |
| } |
| |
| static void gbam2bam_disconnect_work(struct work_struct *w) |
| { |
| struct gbam_port *port = |
| container_of(w, struct gbam_port, disconnect_w); |
| struct bam_ch_info *d = &port->data_ch; |
| int ret; |
| |
| if (d->trans == USB_GADGET_XPORT_BAM2BAM_IPA) { |
| teth_bridge_disconnect(); |
| ret = usb_bam_disconnect_ipa(&d->ipa_params); |
| if (ret) |
| pr_err("%s: usb_bam_disconnect_ipa failed: err:%d\n", |
| __func__, ret); |
| } |
| } |
| |
| static void gbam_connect_work(struct work_struct *w) |
| { |
| struct gbam_port *port = container_of(w, struct gbam_port, connect_w); |
| struct bam_ch_info *d = &port->data_ch; |
| int ret; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| if (!port->port_usb) { |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| return; |
| } |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| if (!test_bit(BAM_CH_READY, &d->flags)) |
| return; |
| |
| ret = msm_bam_dmux_open(d->id, port, gbam_notify); |
| if (ret) { |
| pr_err("%s: unable open bam ch:%d err:%d\n", |
| __func__, d->id, ret); |
| return; |
| } |
| set_bit(BAM_CH_OPENED, &d->flags); |
| |
| gbam_start_io(port); |
| |
| pr_debug("%s: done\n", __func__); |
| } |
| |
| static void gbam2bam_connect_work(struct work_struct *w) |
| { |
| struct gbam_port *port = container_of(w, struct gbam_port, connect_w); |
| struct teth_bridge_connect_params connect_params; |
| struct bam_ch_info *d = &port->data_ch; |
| u32 sps_params; |
| ipa_notify_cb usb_notify_cb; |
| void *priv; |
| int ret; |
| unsigned long flags; |
| |
| if (d->trans == USB_GADGET_XPORT_BAM2BAM) { |
| usb_bam_reset_complete(); |
| ret = usb_bam_connect(d->src_connection_idx, &d->src_pipe_idx); |
| if (ret) { |
| pr_err("%s: usb_bam_connect (src) failed: err:%d\n", |
| __func__, ret); |
| return; |
| } |
| ret = usb_bam_connect(d->dst_connection_idx, &d->dst_pipe_idx); |
| if (ret) { |
| pr_err("%s: usb_bam_connect (dst) failed: err:%d\n", |
| __func__, ret); |
| return; |
| } |
| } else if (d->trans == USB_GADGET_XPORT_BAM2BAM_IPA) { |
| ret = teth_bridge_init(&usb_notify_cb, &priv); |
| if (ret) { |
| pr_err("%s:teth_bridge_init() failed\n", __func__); |
| return; |
| } |
| d->ipa_params.notify = usb_notify_cb; |
| d->ipa_params.priv = priv; |
| d->ipa_params.ipa_ep_cfg.mode.mode = IPA_BASIC; |
| |
| d->ipa_params.client = IPA_CLIENT_USB_PROD; |
| d->ipa_params.dir = USB_TO_PEER_PERIPHERAL; |
| ret = usb_bam_connect_ipa(&d->ipa_params); |
| if (ret) { |
| pr_err("%s: usb_bam_connect_ipa failed: err:%d\n", |
| __func__, ret); |
| return; |
| } |
| |
| d->ipa_params.client = IPA_CLIENT_USB_CONS; |
| d->ipa_params.dir = PEER_PERIPHERAL_TO_USB; |
| ret = usb_bam_connect_ipa(&d->ipa_params); |
| if (ret) { |
| pr_err("%s: usb_bam_connect_ipa failed: err:%d\n", |
| __func__, ret); |
| return; |
| } |
| |
| connect_params.ipa_usb_pipe_hdl = d->ipa_params.prod_clnt_hdl; |
| connect_params.usb_ipa_pipe_hdl = d->ipa_params.cons_clnt_hdl; |
| connect_params.tethering_mode = TETH_TETHERING_MODE_RMNET; |
| ret = teth_bridge_connect(&connect_params); |
| if (ret) { |
| pr_err("%s:teth_bridge_connect() failed\n", __func__); |
| return; |
| } |
| } |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| if (!port->port_usb) { |
| pr_debug("%s: usb cable is disconnected, exiting\n", __func__); |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| return; |
| } |
| d->rx_req = usb_ep_alloc_request(port->port_usb->out, GFP_ATOMIC); |
| if (!d->rx_req) { |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| pr_err("%s: out of memory\n", __func__); |
| return; |
| } |
| |
| d->rx_req->context = port; |
| d->rx_req->complete = gbam_endless_rx_complete; |
| d->rx_req->length = 0; |
| sps_params = (MSM_SPS_MODE | d->src_pipe_idx | |
| MSM_VENDOR_ID) & ~MSM_IS_FINITE_TRANSFER; |
| d->rx_req->udc_priv = sps_params; |
| |
| d->tx_req = usb_ep_alloc_request(port->port_usb->in, GFP_ATOMIC); |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| if (!d->tx_req) { |
| pr_err("%s: out of memory\n", __func__); |
| return; |
| } |
| |
| d->tx_req->context = port; |
| d->tx_req->complete = gbam_endless_tx_complete; |
| d->tx_req->length = 0; |
| sps_params = (MSM_SPS_MODE | d->dst_pipe_idx | |
| MSM_VENDOR_ID) & ~MSM_IS_FINITE_TRANSFER; |
| d->tx_req->udc_priv = sps_params; |
| |
| /* queue in & out requests */ |
| gbam_start_endless_rx(port); |
| gbam_start_endless_tx(port); |
| |
| if (d->trans == USB_GADGET_XPORT_BAM2BAM && port->port_num == 0) { |
| /* Register for peer reset callback */ |
| usb_bam_register_peer_reset_cb(gbam_peer_reset_cb, port); |
| |
| ret = usb_bam_client_ready(true); |
| if (ret) { |
| pr_err("%s: usb_bam_client_ready failed: err:%d\n", |
| __func__, ret); |
| return; |
| } |
| } |
| |
| pr_debug("%s: done\n", __func__); |
| } |
| |
| static int gbam_peer_reset_cb(void *param) |
| { |
| struct gbam_port *port = (struct gbam_port *)param; |
| struct bam_ch_info *d; |
| struct f_rmnet *dev; |
| struct usb_gadget *gadget; |
| int ret; |
| bool reenable_eps = false; |
| |
| dev = port_to_rmnet(port->gr); |
| d = &port->data_ch; |
| |
| gadget = dev->cdev->gadget; |
| |
| pr_debug("%s: reset by peer\n", __func__); |
| |
| /* Disable the relevant EPs if currently EPs are enabled */ |
| if (port->port_usb && port->port_usb->in && |
| port->port_usb->in->driver_data) { |
| usb_ep_disable(port->port_usb->out); |
| usb_ep_disable(port->port_usb->in); |
| |
| port->port_usb->in->driver_data = NULL; |
| port->port_usb->out->driver_data = NULL; |
| reenable_eps = true; |
| } |
| |
| /* Disable BAM */ |
| msm_hw_bam_disable(1); |
| |
| /* Reset BAM */ |
| ret = usb_bam_a2_reset(0); |
| if (ret) { |
| pr_err("%s: BAM reset failed %d\n", __func__, ret); |
| goto reenable_eps; |
| } |
| |
| /* Enable BAM */ |
| msm_hw_bam_disable(0); |
| |
| reenable_eps: |
| /* Re-Enable the relevant EPs, if EPs were originally enabled */ |
| if (reenable_eps) { |
| ret = usb_ep_enable(port->port_usb->in); |
| if (ret) { |
| pr_err("%s: usb_ep_enable failed eptype:IN ep:%p", |
| __func__, port->port_usb->in); |
| return ret; |
| } |
| port->port_usb->in->driver_data = port; |
| |
| ret = usb_ep_enable(port->port_usb->out); |
| if (ret) { |
| pr_err("%s: usb_ep_enable failed eptype:OUT ep:%p", |
| __func__, port->port_usb->out); |
| port->port_usb->in->driver_data = 0; |
| return ret; |
| } |
| port->port_usb->out->driver_data = port; |
| |
| gbam_start_endless_rx(port); |
| gbam_start_endless_tx(port); |
| } |
| |
| /* Unregister the peer reset callback */ |
| if (d->trans == USB_GADGET_XPORT_BAM2BAM && port->port_num == 0) |
| usb_bam_register_peer_reset_cb(NULL, NULL); |
| |
| return 0; |
| } |
| |
| /* BAM data channel ready, allow attempt to open */ |
| static int gbam_data_ch_probe(struct platform_device *pdev) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| int i; |
| unsigned long flags; |
| |
| pr_debug("%s: name:%s\n", __func__, pdev->name); |
| |
| for (i = 0; i < n_bam_ports; i++) { |
| port = bam_ports[i].port; |
| d = &port->data_ch; |
| |
| if (!strncmp(bam_ch_names[i], pdev->name, |
| BAM_DMUX_CH_NAME_MAX_LEN)) { |
| set_bit(BAM_CH_READY, &d->flags); |
| |
| /* if usb is online, try opening bam_ch */ |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| if (port->port_usb) |
| queue_work(gbam_wq, &port->connect_w); |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* BAM data channel went inactive, so close it */ |
| static int gbam_data_ch_remove(struct platform_device *pdev) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| struct usb_ep *ep_in = NULL; |
| struct usb_ep *ep_out = NULL; |
| unsigned long flags; |
| int i; |
| |
| pr_debug("%s: name:%s\n", __func__, pdev->name); |
| |
| for (i = 0; i < n_bam_ports; i++) { |
| if (!strncmp(bam_ch_names[i], pdev->name, |
| BAM_DMUX_CH_NAME_MAX_LEN)) { |
| port = bam_ports[i].port; |
| d = &port->data_ch; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| if (port->port_usb) { |
| ep_in = port->port_usb->in; |
| ep_out = port->port_usb->out; |
| } |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| if (ep_in) |
| usb_ep_fifo_flush(ep_in); |
| if (ep_out) |
| usb_ep_fifo_flush(ep_out); |
| |
| gbam_free_buffers(port); |
| |
| msm_bam_dmux_close(d->id); |
| |
| /* bam dmux will free all pending skbs */ |
| d->pending_with_bam = 0; |
| |
| clear_bit(BAM_CH_READY, &d->flags); |
| clear_bit(BAM_CH_OPENED, &d->flags); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void gbam_port_free(int portno) |
| { |
| struct gbam_port *port = bam_ports[portno].port; |
| struct platform_driver *pdrv = &bam_ports[portno].pdrv; |
| |
| if (port) { |
| kfree(port); |
| platform_driver_unregister(pdrv); |
| } |
| } |
| |
| static void gbam2bam_port_free(int portno) |
| { |
| struct gbam_port *port = bam2bam_ports[portno]; |
| |
| kfree(port); |
| } |
| |
| static int gbam_port_alloc(int portno) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| struct platform_driver *pdrv; |
| |
| port = kzalloc(sizeof(struct gbam_port), GFP_KERNEL); |
| if (!port) |
| return -ENOMEM; |
| |
| port->port_num = portno; |
| |
| /* port initialization */ |
| spin_lock_init(&port->port_lock_ul); |
| spin_lock_init(&port->port_lock_dl); |
| INIT_WORK(&port->connect_w, gbam_connect_work); |
| INIT_WORK(&port->disconnect_w, gbam_disconnect_work); |
| |
| /* data ch */ |
| d = &port->data_ch; |
| d->port = port; |
| INIT_LIST_HEAD(&d->tx_idle); |
| INIT_LIST_HEAD(&d->rx_idle); |
| INIT_WORK(&d->write_tobam_w, gbam_data_write_tobam); |
| INIT_WORK(&d->write_tohost_w, gbam_write_data_tohost_w); |
| skb_queue_head_init(&d->tx_skb_q); |
| skb_queue_head_init(&d->rx_skb_q); |
| d->id = bam_ch_ids[portno]; |
| |
| bam_ports[portno].port = port; |
| |
| pdrv = &bam_ports[portno].pdrv; |
| pdrv->probe = gbam_data_ch_probe; |
| pdrv->remove = gbam_data_ch_remove; |
| pdrv->driver.name = bam_ch_names[portno]; |
| pdrv->driver.owner = THIS_MODULE; |
| |
| platform_driver_register(pdrv); |
| pr_debug("%s: port:%p portno:%d\n", __func__, port, portno); |
| |
| return 0; |
| } |
| |
| static int gbam2bam_port_alloc(int portno) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| |
| port = kzalloc(sizeof(struct gbam_port), GFP_KERNEL); |
| if (!port) |
| return -ENOMEM; |
| |
| port->port_num = portno; |
| |
| /* port initialization */ |
| spin_lock_init(&port->port_lock_ul); |
| spin_lock_init(&port->port_lock_dl); |
| |
| INIT_WORK(&port->connect_w, gbam2bam_connect_work); |
| INIT_WORK(&port->disconnect_w, gbam2bam_disconnect_work); |
| |
| /* data ch */ |
| d = &port->data_ch; |
| d->port = port; |
| bam2bam_ports[portno] = port; |
| |
| pr_debug("%s: port:%p portno:%d\n", __func__, port, portno); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_DEBUG_FS) |
| #define DEBUG_BUF_SIZE 1024 |
| static ssize_t gbam_read_stats(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| char *buf; |
| unsigned long flags; |
| int ret; |
| int i; |
| int temp = 0; |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| for (i = 0; i < n_bam_ports; i++) { |
| port = bam_ports[i].port; |
| if (!port) |
| continue; |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| |
| d = &port->data_ch; |
| |
| temp += scnprintf(buf + temp, DEBUG_BUF_SIZE - temp, |
| "#PORT:%d port:%p data_ch:%p#\n" |
| "dpkts_to_usbhost: %lu\n" |
| "dpkts_to_modem: %lu\n" |
| "dpkts_pwith_bam: %u\n" |
| "to_usbhost_dcnt: %u\n" |
| "tomodem__dcnt: %u\n" |
| "tx_buf_len: %u\n" |
| "rx_buf_len: %u\n" |
| "data_ch_open: %d\n" |
| "data_ch_ready: %d\n", |
| i, port, &port->data_ch, |
| d->to_host, d->to_modem, |
| d->pending_with_bam, |
| d->tohost_drp_cnt, d->tomodem_drp_cnt, |
| d->tx_skb_q.qlen, d->rx_skb_q.qlen, |
| test_bit(BAM_CH_OPENED, &d->flags), |
| test_bit(BAM_CH_READY, &d->flags)); |
| |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| } |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, temp); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static ssize_t gbam_reset_stats(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| int i; |
| unsigned long flags; |
| |
| for (i = 0; i < n_bam_ports; i++) { |
| port = bam_ports[i].port; |
| if (!port) |
| continue; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| |
| d = &port->data_ch; |
| |
| d->to_host = 0; |
| d->to_modem = 0; |
| d->pending_with_bam = 0; |
| d->tohost_drp_cnt = 0; |
| d->tomodem_drp_cnt = 0; |
| |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| } |
| return count; |
| } |
| |
| const struct file_operations gbam_stats_ops = { |
| .read = gbam_read_stats, |
| .write = gbam_reset_stats, |
| }; |
| |
| static void gbam_debugfs_init(void) |
| { |
| struct dentry *dent; |
| struct dentry *dfile; |
| |
| dent = debugfs_create_dir("usb_rmnet", 0); |
| if (IS_ERR(dent)) |
| return; |
| |
| /* TODO: Implement cleanup function to remove created file */ |
| dfile = debugfs_create_file("status", 0444, dent, 0, &gbam_stats_ops); |
| if (!dfile || IS_ERR(dfile)) |
| debugfs_remove(dent); |
| } |
| #else |
| static void gam_debugfs_init(void) { } |
| #endif |
| |
| void gbam_disconnect(struct grmnet *gr, u8 port_num, enum transport_type trans) |
| { |
| struct gbam_port *port; |
| unsigned long flags; |
| struct bam_ch_info *d; |
| |
| pr_debug("%s: grmnet:%p port#%d\n", __func__, gr, port_num); |
| |
| if (trans == USB_GADGET_XPORT_BAM && |
| port_num >= n_bam_ports) { |
| pr_err("%s: invalid bam portno#%d\n", |
| __func__, port_num); |
| return; |
| } |
| |
| if ((trans == USB_GADGET_XPORT_BAM2BAM || |
| trans == USB_GADGET_XPORT_BAM2BAM_IPA) && |
| port_num >= n_bam2bam_ports) { |
| pr_err("%s: invalid bam2bam portno#%d\n", |
| __func__, port_num); |
| return; |
| } |
| |
| if (!gr) { |
| pr_err("%s: grmnet port is null\n", __func__); |
| return; |
| } |
| if (trans == USB_GADGET_XPORT_BAM) |
| port = bam_ports[port_num].port; |
| else |
| port = bam2bam_ports[port_num]; |
| |
| d = &port->data_ch; |
| port->gr = gr; |
| |
| if (trans == USB_GADGET_XPORT_BAM) |
| gbam_free_buffers(port); |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| port->port_usb = 0; |
| n_tx_req_queued = 0; |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| /* disable endpoints */ |
| usb_ep_disable(gr->out); |
| usb_ep_disable(gr->in); |
| |
| gr->in->driver_data = NULL; |
| gr->out->driver_data = NULL; |
| |
| if (trans == USB_GADGET_XPORT_BAM || |
| trans == USB_GADGET_XPORT_BAM2BAM_IPA) |
| queue_work(gbam_wq, &port->disconnect_w); |
| else if (trans == USB_GADGET_XPORT_BAM2BAM) { |
| if (port_num == 0) { |
| if (usb_bam_client_ready(false)) { |
| pr_err("%s: usb_bam_client_ready failed\n", |
| __func__); |
| } |
| } |
| } |
| } |
| |
| int gbam_connect(struct grmnet *gr, u8 port_num, |
| enum transport_type trans, u8 src_connection_idx, |
| u8 dst_connection_idx) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| int ret; |
| unsigned long flags; |
| |
| pr_debug("%s: grmnet:%p port#%d\n", __func__, gr, port_num); |
| |
| if (trans == USB_GADGET_XPORT_BAM && port_num >= n_bam_ports) { |
| pr_err("%s: invalid portno#%d\n", __func__, port_num); |
| return -ENODEV; |
| } |
| |
| if ((trans == USB_GADGET_XPORT_BAM2BAM || |
| trans == USB_GADGET_XPORT_BAM2BAM_IPA) |
| && port_num >= n_bam2bam_ports) { |
| pr_err("%s: invalid portno#%d\n", __func__, port_num); |
| return -ENODEV; |
| } |
| |
| if (!gr) { |
| pr_err("%s: grmnet port is null\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (trans == USB_GADGET_XPORT_BAM) |
| port = bam_ports[port_num].port; |
| else |
| port = bam2bam_ports[port_num]; |
| |
| d = &port->data_ch; |
| |
| ret = usb_ep_enable(gr->in); |
| if (ret) { |
| pr_err("%s: usb_ep_enable failed eptype:IN ep:%p", |
| __func__, gr->in); |
| return ret; |
| } |
| gr->in->driver_data = port; |
| |
| ret = usb_ep_enable(gr->out); |
| if (ret) { |
| pr_err("%s: usb_ep_enable failed eptype:OUT ep:%p", |
| __func__, gr->out); |
| gr->in->driver_data = 0; |
| return ret; |
| } |
| gr->out->driver_data = port; |
| |
| spin_lock_irqsave(&port->port_lock_ul, flags); |
| spin_lock(&port->port_lock_dl); |
| port->port_usb = gr; |
| |
| if (trans == USB_GADGET_XPORT_BAM) { |
| d->to_host = 0; |
| d->to_modem = 0; |
| d->pending_with_bam = 0; |
| d->tohost_drp_cnt = 0; |
| d->tomodem_drp_cnt = 0; |
| } |
| |
| spin_unlock(&port->port_lock_dl); |
| spin_unlock_irqrestore(&port->port_lock_ul, flags); |
| |
| if (trans == USB_GADGET_XPORT_BAM2BAM) { |
| port->gr = gr; |
| d->src_connection_idx = src_connection_idx; |
| d->dst_connection_idx = dst_connection_idx; |
| } else if (trans == USB_GADGET_XPORT_BAM2BAM_IPA) { |
| port->gr = gr; |
| d->ipa_params.src_pipe = &(d->src_pipe_idx); |
| d->ipa_params.dst_pipe = &(d->dst_pipe_idx); |
| d->ipa_params.src_idx = src_connection_idx; |
| d->ipa_params.dst_idx = dst_connection_idx; |
| } |
| |
| d->trans = trans; |
| queue_work(gbam_wq, &port->connect_w); |
| |
| return 0; |
| } |
| |
| int gbam_setup(unsigned int no_bam_port, unsigned int no_bam2bam_port) |
| { |
| int i; |
| int ret; |
| |
| pr_debug("%s: requested BAM ports:%d and BAM2BAM ports:%d\n", |
| __func__, no_bam_port, no_bam2bam_port); |
| |
| if ((!no_bam_port && !no_bam2bam_port) || no_bam_port > BAM_N_PORTS |
| || no_bam2bam_port > BAM2BAM_N_PORTS) { |
| pr_err("%s: Invalid num of ports count:%d,%d\n", |
| __func__, no_bam_port, no_bam2bam_port); |
| return -EINVAL; |
| } |
| |
| gbam_wq = alloc_workqueue("k_gbam", WQ_UNBOUND | WQ_MEM_RECLAIM, 1); |
| if (!gbam_wq) { |
| pr_err("%s: Unable to create workqueue gbam_wq\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < no_bam_port; i++) { |
| n_bam_ports++; |
| ret = gbam_port_alloc(i); |
| if (ret) { |
| n_bam_ports--; |
| pr_err("%s: Unable to alloc port:%d\n", __func__, i); |
| goto free_bam_ports; |
| } |
| } |
| |
| for (i = 0; i < no_bam2bam_port; i++) { |
| n_bam2bam_ports++; |
| ret = gbam2bam_port_alloc(i); |
| if (ret) { |
| n_bam2bam_ports--; |
| pr_err("%s: Unable to alloc port:%d\n", __func__, i); |
| goto free_bam_ports; |
| } |
| } |
| gbam_debugfs_init(); |
| return 0; |
| |
| free_bam_ports: |
| for (i = 0; i < n_bam_ports; i++) |
| gbam_port_free(i); |
| for (i = 0; i < n_bam2bam_ports; i++) |
| gbam2bam_port_free(i); |
| destroy_workqueue(gbam_wq); |
| |
| return ret; |
| } |
| |
| static int gbam_wake_cb(void *param) |
| { |
| struct gbam_port *port = (struct gbam_port *)param; |
| struct bam_ch_info *d; |
| struct f_rmnet *dev; |
| |
| dev = port_to_rmnet(port->gr); |
| d = &port->data_ch; |
| |
| pr_debug("%s: woken up by peer\n", __func__); |
| |
| return usb_gadget_wakeup(dev->cdev->gadget); |
| } |
| |
| void gbam_suspend(struct grmnet *gr, u8 port_num, enum transport_type trans) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| |
| if (trans != USB_GADGET_XPORT_BAM2BAM && |
| trans != USB_GADGET_XPORT_BAM2BAM_IPA) |
| return; |
| |
| port = bam2bam_ports[port_num]; |
| d = &port->data_ch; |
| |
| pr_debug("%s: suspended port %d\n", __func__, port_num); |
| |
| usb_bam_register_wake_cb(d->dst_connection_idx, gbam_wake_cb, port); |
| if (trans == USB_GADGET_XPORT_BAM2BAM_IPA) { |
| usb_bam_register_start_stop_cbs(gbam_start, gbam_stop, port); |
| usb_bam_suspend(&d->ipa_params); |
| } |
| } |
| |
| void gbam_resume(struct grmnet *gr, u8 port_num, enum transport_type trans) |
| { |
| struct gbam_port *port; |
| struct bam_ch_info *d; |
| |
| if (trans != USB_GADGET_XPORT_BAM2BAM && |
| trans != USB_GADGET_XPORT_BAM2BAM_IPA) |
| return; |
| |
| port = bam2bam_ports[port_num]; |
| d = &port->data_ch; |
| |
| pr_debug("%s: resumed port %d\n", __func__, port_num); |
| |
| usb_bam_register_wake_cb(d->dst_connection_idx, NULL, NULL); |
| if (trans == USB_GADGET_XPORT_BAM2BAM_IPA) |
| usb_bam_resume(&d->ipa_params); |
| } |