| /* Copyright (c) 2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/pm8xxx/pm8921.h> |
| #include <sound/core.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/soc-dsp.h> |
| #include <sound/pcm.h> |
| #include <sound/jack.h> |
| #include <asm/mach-types.h> |
| #include <mach/socinfo.h> |
| #include "msm-pcm-routing.h" |
| #include "../codecs/wcd9310.h" |
| |
| /* 8960 machine driver */ |
| |
| #define PM8921_GPIO_BASE NR_GPIO_IRQS |
| #define PM8921_GPIO_PM_TO_SYS(pm_gpio) (pm_gpio - 1 + PM8921_GPIO_BASE) |
| |
| #define MSM8960_SPK_ON 1 |
| #define MSM8960_SPK_OFF 0 |
| |
| #define msm8960_SLIM_0_RX_MAX_CHANNELS 2 |
| #define msm8960_SLIM_0_TX_MAX_CHANNELS 4 |
| |
| #define BTSCO_RATE_8KHZ 8000 |
| #define BTSCO_RATE_16KHZ 16000 |
| |
| #define BOTTOM_SPK_AMP_POS 0x1 |
| #define BOTTOM_SPK_AMP_NEG 0x2 |
| #define TOP_SPK_AMP_POS 0x4 |
| #define TOP_SPK_AMP_NEG 0x8 |
| |
| #define GPIO_AUX_PCM_DOUT 63 |
| #define GPIO_AUX_PCM_DIN 64 |
| #define GPIO_AUX_PCM_SYNC 65 |
| #define GPIO_AUX_PCM_CLK 66 |
| |
| static u32 top_spk_pamp_gpio = PM8921_GPIO_PM_TO_SYS(18); |
| static u32 bottom_spk_pamp_gpio = PM8921_GPIO_PM_TO_SYS(19); |
| static int msm8960_spk_control; |
| static int msm8960_ext_bottom_spk_pamp; |
| static int msm8960_ext_top_spk_pamp; |
| static int msm8960_slim_0_rx_ch = 1; |
| static int msm8960_slim_0_tx_ch = 1; |
| |
| static int msm8960_btsco_rate = BTSCO_RATE_8KHZ; |
| static int msm8960_btsco_ch = 1; |
| |
| struct tabla_mbhc_calibration tabla_cal = { |
| .bias = TABLA_MICBIAS2, |
| .tldoh = 100, |
| .bg_fast_settle = 100, |
| .mic_current = TABLA_PID_MIC_5_UA, |
| .mic_pid = 100, |
| .hph_current = TABLA_PID_MIC_5_UA, |
| .setup_plug_removal_delay = 1000000, |
| .shutdown_plug_removal = 100000, |
| }; |
| |
| static struct clk *codec_clk; |
| static int clk_users; |
| |
| static int msm8960_headset_gpios_configured; |
| |
| static struct snd_soc_jack hs_jack; |
| static struct snd_soc_jack button_jack; |
| |
| static void msm8960_enable_ext_spk_amp_gpio(u32 spk_amp_gpio) |
| { |
| int ret = 0; |
| |
| struct pm_gpio param = { |
| .direction = PM_GPIO_DIR_OUT, |
| .output_buffer = PM_GPIO_OUT_BUF_CMOS, |
| .output_value = 1, |
| .pull = PM_GPIO_PULL_NO, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_MED, |
| . |
| function = PM_GPIO_FUNC_NORMAL, |
| }; |
| |
| if (spk_amp_gpio == bottom_spk_pamp_gpio) { |
| |
| ret = gpio_request(bottom_spk_pamp_gpio, "BOTTOM_SPK_AMP"); |
| if (ret) { |
| pr_err("%s: Error requesting BOTTOM SPK AMP GPIO %u\n", |
| __func__, bottom_spk_pamp_gpio); |
| return; |
| } |
| ret = pm8xxx_gpio_config(bottom_spk_pamp_gpio, ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure Bottom Spk Ampl" |
| " gpio %u\n", __func__, bottom_spk_pamp_gpio); |
| else { |
| pr_debug("%s: enable Bottom spkr amp gpio\n", __func__); |
| gpio_direction_output(bottom_spk_pamp_gpio, 1); |
| } |
| |
| } else if (spk_amp_gpio == top_spk_pamp_gpio) { |
| |
| ret = gpio_request(top_spk_pamp_gpio, "TOP_SPK_AMP"); |
| if (ret) { |
| pr_err("%s: Error requesting GPIO %d\n", __func__, |
| top_spk_pamp_gpio); |
| return; |
| } |
| ret = pm8xxx_gpio_config(top_spk_pamp_gpio, ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure Top Spk Ampl" |
| " gpio %u\n", __func__, top_spk_pamp_gpio); |
| else { |
| pr_debug("%s: enable Top spkr amp gpio\n", __func__); |
| gpio_direction_output(top_spk_pamp_gpio, 1); |
| } |
| } else { |
| pr_err("%s: ERROR : Invalid External Speaker Ampl GPIO." |
| " gpio = %u\n", __func__, spk_amp_gpio); |
| return; |
| } |
| } |
| |
| static void msm8960_ext_spk_power_amp_on(u32 spk) |
| { |
| if (spk & (BOTTOM_SPK_AMP_POS | BOTTOM_SPK_AMP_NEG)) { |
| |
| if ((msm8960_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_POS) && |
| (msm8960_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_NEG)) { |
| |
| pr_debug("%s() External Bottom Speaker Ampl already " |
| "turned on. spk = 0x%08x\n", __func__, spk); |
| return; |
| } |
| |
| msm8960_ext_bottom_spk_pamp |= spk; |
| |
| if ((msm8960_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_POS) && |
| (msm8960_ext_bottom_spk_pamp & BOTTOM_SPK_AMP_NEG)) { |
| |
| msm8960_enable_ext_spk_amp_gpio(bottom_spk_pamp_gpio); |
| pr_debug("%s: slepping 4 ms after turning on external " |
| " Bottom Speaker Ampl\n", __func__); |
| usleep_range(4000, 4000); |
| } |
| |
| } else if (spk & (TOP_SPK_AMP_POS | TOP_SPK_AMP_NEG)) { |
| |
| if ((msm8960_ext_top_spk_pamp & TOP_SPK_AMP_POS) && |
| (msm8960_ext_top_spk_pamp & TOP_SPK_AMP_NEG)) { |
| |
| pr_debug("%s() External Top Speaker Ampl already" |
| "turned on. spk = 0x%08x\n", __func__, spk); |
| return; |
| } |
| |
| msm8960_ext_top_spk_pamp |= spk; |
| |
| if ((msm8960_ext_top_spk_pamp & TOP_SPK_AMP_POS) && |
| (msm8960_ext_top_spk_pamp & TOP_SPK_AMP_NEG)) { |
| |
| msm8960_enable_ext_spk_amp_gpio(top_spk_pamp_gpio); |
| pr_debug("%s: sleeping 4 ms after turning on " |
| " external Top Speaker Ampl\n", __func__); |
| usleep_range(4000, 4000); |
| } |
| } else { |
| |
| pr_err("%s: ERROR : Invalid External Speaker Ampl. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| } |
| |
| static void msm8960_ext_spk_power_amp_off(u32 spk) |
| { |
| if (spk & (BOTTOM_SPK_AMP_POS | BOTTOM_SPK_AMP_NEG)) { |
| |
| if (!msm8960_ext_bottom_spk_pamp) |
| return; |
| |
| gpio_direction_output(bottom_spk_pamp_gpio, 0); |
| gpio_free(bottom_spk_pamp_gpio); |
| msm8960_ext_bottom_spk_pamp = 0; |
| |
| pr_debug("%s: sleeping 4 ms after turning off external Bottom" |
| " Speaker Ampl\n", __func__); |
| |
| usleep_range(4000, 4000); |
| |
| } else if (spk & (TOP_SPK_AMP_POS | TOP_SPK_AMP_NEG)) { |
| |
| if (!msm8960_ext_top_spk_pamp) |
| return; |
| |
| gpio_direction_output(top_spk_pamp_gpio, 0); |
| gpio_free(top_spk_pamp_gpio); |
| msm8960_ext_top_spk_pamp = 0; |
| |
| pr_debug("%s: sleeping 4 ms after turning off external Top" |
| " Spkaker Ampl\n", __func__); |
| |
| usleep_range(4000, 4000); |
| } else { |
| |
| pr_err("%s: ERROR : Invalid Ext Spk Ampl. spk = 0x%08x\n", |
| __func__, spk); |
| return; |
| } |
| } |
| |
| static void msm8960_ext_control(struct snd_soc_codec *codec) |
| { |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| pr_debug("%s: msm8960_spk_control = %d", __func__, msm8960_spk_control); |
| if (msm8960_spk_control == MSM8960_SPK_ON) { |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Neg"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Neg"); |
| } else { |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Bottom Pos"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Bottom Neg"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Top Pos"); |
| snd_soc_dapm_disable_pin(dapm, "Ext Spk Top Neg"); |
| } |
| |
| snd_soc_dapm_sync(dapm); |
| } |
| |
| static int msm8960_get_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm8960_spk_control = %d", __func__, msm8960_spk_control); |
| ucontrol->value.integer.value[0] = msm8960_spk_control; |
| return 0; |
| } |
| static int msm8960_set_spk(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| |
| pr_debug("%s()\n", __func__); |
| if (msm8960_spk_control == ucontrol->value.integer.value[0]) |
| return 0; |
| |
| msm8960_spk_control = ucontrol->value.integer.value[0]; |
| msm8960_ext_control(codec); |
| return 1; |
| } |
| static int msm8960_spkramp_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *k, int event) |
| { |
| pr_debug("%s() %x\n", __func__, SND_SOC_DAPM_EVENT_ON(event)); |
| |
| if (SND_SOC_DAPM_EVENT_ON(event)) { |
| if (!strncmp(w->name, "Ext Spk Bottom Pos", 18)) |
| msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18)) |
| msm8960_ext_spk_power_amp_on(BOTTOM_SPK_AMP_NEG); |
| else if (!strncmp(w->name, "Ext Spk Top Pos", 15)) |
| msm8960_ext_spk_power_amp_on(TOP_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Top Neg", 15)) |
| msm8960_ext_spk_power_amp_on(TOP_SPK_AMP_NEG); |
| else { |
| pr_err("%s() Invalid Speaker Widget = %s\n", |
| __func__, w->name); |
| return -EINVAL; |
| } |
| |
| } else { |
| if (!strncmp(w->name, "Ext Spk Bottom Pos", 18)) |
| msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Bottom Neg", 18)) |
| msm8960_ext_spk_power_amp_off(BOTTOM_SPK_AMP_NEG); |
| else if (!strncmp(w->name, "Ext Spk Top Pos", 15)) |
| msm8960_ext_spk_power_amp_off(TOP_SPK_AMP_POS); |
| else if (!strncmp(w->name, "Ext Spk Top Neg", 15)) |
| msm8960_ext_spk_power_amp_off(TOP_SPK_AMP_NEG); |
| else { |
| pr_err("%s() Invalid Speaker Widget = %s\n", |
| __func__, w->name); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| static int msm8960_mclk_event(struct snd_soc_dapm_widget *w, |
| struct snd_kcontrol *kcontrol, int event) |
| { |
| pr_debug("%s: event = %d\n", __func__, event); |
| |
| switch (event) { |
| case SND_SOC_DAPM_PRE_PMU: |
| |
| clk_users++; |
| pr_debug("%s: clk_users = %d\n", __func__, clk_users); |
| |
| if (clk_users != 1) |
| return 0; |
| |
| codec_clk = clk_get(NULL, "i2s_spkr_osr_clk"); |
| if (codec_clk) { |
| clk_set_rate(codec_clk, 12288000); |
| clk_enable(codec_clk); |
| tabla_mclk_enable(w->codec, 1); |
| |
| } else { |
| pr_err("%s: Error setting Tabla MCLK\n", __func__); |
| clk_users--; |
| return -EINVAL; |
| } |
| break; |
| case SND_SOC_DAPM_POST_PMD: |
| |
| pr_debug("%s: clk_users = %d\n", __func__, clk_users); |
| |
| if (clk_users == 0) |
| return 0; |
| |
| clk_users--; |
| |
| if (!clk_users) { |
| pr_debug("%s: disabling MCLK. clk_users = %d\n", |
| __func__, clk_users); |
| |
| clk_disable(codec_clk); |
| clk_put(codec_clk); |
| tabla_mclk_enable(w->codec, 0); |
| } |
| break; |
| } |
| return 0; |
| } |
| |
| static const struct snd_soc_dapm_widget msm8960_dapm_widgets[] = { |
| |
| SND_SOC_DAPM_SUPPLY("MCLK", SND_SOC_NOPM, 0, 0, |
| msm8960_mclk_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), |
| |
| SND_SOC_DAPM_SPK("Ext Spk Bottom Pos", msm8960_spkramp_event), |
| SND_SOC_DAPM_SPK("Ext Spk Bottom Neg", msm8960_spkramp_event), |
| |
| SND_SOC_DAPM_SPK("Ext Spk Top Pos", msm8960_spkramp_event), |
| SND_SOC_DAPM_SPK("Ext Spk Top Neg", msm8960_spkramp_event), |
| |
| SND_SOC_DAPM_MIC("Handset Mic", NULL), |
| SND_SOC_DAPM_MIC("Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic1", NULL), |
| SND_SOC_DAPM_MIC("ANCRight Headset Mic", NULL), |
| SND_SOC_DAPM_MIC("ANCLeft Headset Mic", NULL), |
| |
| SND_SOC_DAPM_MIC("Digital Mic1", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic2", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic3", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic4", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic5", NULL), |
| SND_SOC_DAPM_MIC("Digital Mic6", NULL), |
| |
| }; |
| |
| static const struct snd_soc_dapm_route common_audio_map[] = { |
| |
| {"RX_BIAS", NULL, "MCLK"}, |
| {"LDO_H", NULL, "MCLK"}, |
| |
| /* Speaker path */ |
| {"Ext Spk Bottom Pos", NULL, "LINEOUT1"}, |
| {"Ext Spk Bottom Neg", NULL, "LINEOUT3"}, |
| |
| {"Ext Spk Top Pos", NULL, "LINEOUT2"}, |
| {"Ext Spk Top Neg", NULL, "LINEOUT4"}, |
| |
| /* Microphone path */ |
| {"AMIC1", NULL, "MIC BIAS1 Internal1"}, |
| {"MIC BIAS1 Internal1", NULL, "Handset Mic"}, |
| |
| {"AMIC2", NULL, "MIC BIAS2 External"}, |
| {"MIC BIAS2 External", NULL, "Headset Mic"}, |
| |
| /** |
| * AMIC3 and AMIC4 inputs are connected to ANC microphones |
| * These mics are biased differently on CDP and FLUID |
| * routing entries below are based on bias arrangement |
| * on FLUID. |
| */ |
| {"AMIC3", NULL, "MIC BIAS3 Internal1"}, |
| {"MIC BIAS3 Internal1", NULL, "ANCRight Headset Mic"}, |
| |
| {"AMIC4", NULL, "MIC BIAS1 Internal2"}, |
| {"MIC BIAS1 Internal2", NULL, "ANCLeft Headset Mic"}, |
| |
| {"HEADPHONE", NULL, "LDO_H"}, |
| |
| /** |
| * The digital Mic routes are setup considering |
| * fluid as default device. |
| */ |
| |
| /** |
| * Digital Mic1. Front Bottom left Digital Mic on Fluid and MTP. |
| * Digital Mic GM5 on CDP mainboard. |
| * Conncted to DMIC2 Input on Tabla codec. |
| */ |
| {"DMIC2", NULL, "MIC BIAS1 External"}, |
| {"MIC BIAS1 External", NULL, "Digital Mic1"}, |
| |
| /** |
| * Digital Mic2. Front Bottom right Digital Mic on Fluid and MTP. |
| * Digital Mic GM6 on CDP mainboard. |
| * Conncted to DMIC1 Input on Tabla codec. |
| */ |
| {"DMIC1", NULL, "MIC BIAS1 External"}, |
| {"MIC BIAS1 External", NULL, "Digital Mic2"}, |
| |
| /** |
| * Digital Mic3. Back Bottom Digital Mic on Fluid. |
| * Digital Mic GM1 on CDP mainboard. |
| * Conncted to DMIC4 Input on Tabla codec. |
| */ |
| {"DMIC4", NULL, "MIC BIAS3 External"}, |
| {"MIC BIAS3 External", NULL, "Digital Mic3"}, |
| |
| /** |
| * Digital Mic4. Back top Digital Mic on Fluid. |
| * Digital Mic GM2 on CDP mainboard. |
| * Conncted to DMIC3 Input on Tabla codec. |
| */ |
| {"DMIC3", NULL, "MIC BIAS3 External"}, |
| {"MIC BIAS3 External", NULL, "Digital Mic4"}, |
| |
| /** |
| * Digital Mic5. Front top Digital Mic on Fluid. |
| * Digital Mic GM3 on CDP mainboard. |
| * Conncted to DMIC5 Input on Tabla codec. |
| */ |
| {"DMIC5", NULL, "MIC BIAS4 External"}, |
| {"MIC BIAS4 External", NULL, "Digital Mic5"}, |
| |
| /* Tabla digital Mic6 - back bottom digital Mic on Liquid and |
| * bottom mic on CDP. FLUID/MTP do not have dmic6 installed. |
| */ |
| {"DMIC6", NULL, "MIC BIAS4 External"}, |
| {"MIC BIAS4 External", NULL, "Digital Mic6"}, |
| }; |
| |
| static const char *spk_function[] = {"Off", "On"}; |
| static const char *slim0_rx_ch_text[] = {"One", "Two"}; |
| static const char *slim0_tx_ch_text[] = {"One", "Two", "Three", "Four"}; |
| |
| static const struct soc_enum msm8960_enum[] = { |
| SOC_ENUM_SINGLE_EXT(2, spk_function), |
| SOC_ENUM_SINGLE_EXT(2, slim0_rx_ch_text), |
| SOC_ENUM_SINGLE_EXT(4, slim0_tx_ch_text), |
| }; |
| |
| static const char *btsco_rate_text[] = {"8000", "16000"}; |
| static const struct soc_enum msm8960_btsco_enum[] = { |
| SOC_ENUM_SINGLE_EXT(2, btsco_rate_text), |
| }; |
| |
| static int msm8960_slim_0_rx_ch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm8960_slim_0_rx_ch = %d\n", __func__, |
| msm8960_slim_0_rx_ch); |
| ucontrol->value.integer.value[0] = msm8960_slim_0_rx_ch - 1; |
| return 0; |
| } |
| |
| static int msm8960_slim_0_rx_ch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| msm8960_slim_0_rx_ch = ucontrol->value.integer.value[0] + 1; |
| |
| pr_debug("%s: msm8960_slim_0_rx_ch = %d\n", __func__, |
| msm8960_slim_0_rx_ch); |
| return 1; |
| } |
| |
| static int msm8960_slim_0_tx_ch_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm8960_slim_0_tx_ch = %d\n", __func__, |
| msm8960_slim_0_tx_ch); |
| ucontrol->value.integer.value[0] = msm8960_slim_0_tx_ch - 1; |
| return 0; |
| } |
| |
| static int msm8960_slim_0_tx_ch_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| msm8960_slim_0_tx_ch = ucontrol->value.integer.value[0] + 1; |
| |
| pr_debug("%s: msm8960_slim_0_tx_ch = %d\n", __func__, |
| msm8960_slim_0_tx_ch); |
| return 1; |
| } |
| |
| static int msm8960_btsco_rate_get(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| pr_debug("%s: msm8960_btsco_rate = %d", __func__, |
| msm8960_btsco_rate); |
| ucontrol->value.integer.value[0] = msm8960_btsco_rate; |
| return 0; |
| } |
| |
| static int msm8960_btsco_rate_put(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| switch (ucontrol->value.integer.value[0]) { |
| case 0: |
| msm8960_btsco_rate = BTSCO_RATE_8KHZ; |
| break; |
| case 1: |
| msm8960_btsco_rate = BTSCO_RATE_16KHZ; |
| break; |
| default: |
| msm8960_btsco_rate = BTSCO_RATE_8KHZ; |
| break; |
| } |
| pr_debug("%s: msm8960_btsco_rate = %d\n", __func__, |
| msm8960_btsco_rate); |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new tabla_msm8960_controls[] = { |
| SOC_ENUM_EXT("Speaker Function", msm8960_enum[0], msm8960_get_spk, |
| msm8960_set_spk), |
| SOC_ENUM_EXT("SLIM_0_RX Channels", msm8960_enum[1], |
| msm8960_slim_0_rx_ch_get, msm8960_slim_0_rx_ch_put), |
| SOC_ENUM_EXT("SLIM_0_TX Channels", msm8960_enum[2], |
| msm8960_slim_0_tx_ch_get, msm8960_slim_0_tx_ch_put), |
| }; |
| |
| static const struct snd_kcontrol_new int_btsco_rate_mixer_controls[] = { |
| SOC_ENUM_EXT("Internal BTSCO SampleRate", msm8960_btsco_enum[0], |
| msm8960_btsco_rate_get, msm8960_btsco_rate_put), |
| }; |
| |
| static int msm8960_btsco_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| int err = 0; |
| struct snd_soc_platform *platform = rtd->platform; |
| |
| err = snd_soc_add_platform_controls(platform, |
| int_btsco_rate_mixer_controls, |
| ARRAY_SIZE(int_btsco_rate_mixer_controls)); |
| if (err < 0) |
| return err; |
| return 0; |
| } |
| |
| static int msm8960_audrx_init(struct snd_soc_pcm_runtime *rtd) |
| { |
| int err; |
| struct snd_soc_codec *codec = rtd->codec; |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| |
| pr_debug("%s()\n", __func__); |
| |
| if (machine_is_msm8960_liquid()) { |
| top_spk_pamp_gpio = (PM8921_GPIO_PM_TO_SYS(19)); |
| bottom_spk_pamp_gpio = (PM8921_GPIO_PM_TO_SYS(18)); |
| } |
| |
| rtd->pmdown_time = 0; |
| |
| err = snd_soc_add_controls(codec, tabla_msm8960_controls, |
| ARRAY_SIZE(tabla_msm8960_controls)); |
| if (err < 0) |
| return err; |
| |
| snd_soc_dapm_new_controls(dapm, msm8960_dapm_widgets, |
| ARRAY_SIZE(msm8960_dapm_widgets)); |
| |
| snd_soc_dapm_add_routes(dapm, common_audio_map, |
| ARRAY_SIZE(common_audio_map)); |
| |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Bottom Neg"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Pos"); |
| snd_soc_dapm_enable_pin(dapm, "Ext Spk Top Neg"); |
| |
| snd_soc_dapm_sync(dapm); |
| |
| err = snd_soc_jack_new(codec, "Headset Jack", |
| (SND_JACK_HEADSET | SND_JACK_OC_HPHL | SND_JACK_OC_HPHR), |
| &hs_jack); |
| if (err) { |
| pr_err("failed to create new jack\n"); |
| return err; |
| } |
| |
| err = snd_soc_jack_new(codec, "Button Jack", |
| SND_JACK_BTN_0, &button_jack); |
| if (err) { |
| pr_err("failed to create new jack\n"); |
| return err; |
| } |
| |
| tabla_hs_detect(codec, &hs_jack, &button_jack, &tabla_cal); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dsp_link lpa_fe_media = { |
| .playback = true, |
| .trigger = { |
| SND_SOC_DSP_TRIGGER_POST, |
| SND_SOC_DSP_TRIGGER_POST |
| }, |
| }; |
| |
| static struct snd_soc_dsp_link fe_media = { |
| .playback = true, |
| .capture = true, |
| .trigger = { |
| SND_SOC_DSP_TRIGGER_POST, |
| SND_SOC_DSP_TRIGGER_POST |
| }, |
| }; |
| |
| static struct snd_soc_dsp_link slimbus0_hl_media = { |
| .playback = true, |
| .capture = true, |
| .trigger = { |
| SND_SOC_DSP_TRIGGER_POST, |
| SND_SOC_DSP_TRIGGER_POST |
| }, |
| }; |
| |
| static struct snd_soc_dsp_link int_fm_hl_media = { |
| .playback = true, |
| .capture = true, |
| .trigger = { |
| SND_SOC_DSP_TRIGGER_POST, |
| SND_SOC_DSP_TRIGGER_POST |
| }, |
| }; |
| |
| static int msm8960_slim_0_rx_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| pr_debug("%s()\n", __func__); |
| rate->min = rate->max = 48000; |
| channels->min = channels->max = msm8960_slim_0_rx_ch; |
| |
| return 0; |
| } |
| |
| static int msm8960_slim_0_tx_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| pr_debug("%s()\n", __func__); |
| rate->min = rate->max = 48000; |
| channels->min = channels->max = msm8960_slim_0_tx_ch; |
| |
| return 0; |
| } |
| |
| static int msm8960_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| pr_debug("%s()\n", __func__); |
| rate->min = rate->max = 48000; |
| |
| return 0; |
| } |
| |
| static int msm8960_btsco_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| rate->min = rate->max = msm8960_btsco_rate; |
| channels->min = channels->max = msm8960_btsco_ch; |
| |
| return 0; |
| } |
| static int msm8960_auxpcm_be_params_fixup(struct snd_soc_pcm_runtime *rtd, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_interval *rate = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_RATE); |
| |
| struct snd_interval *channels = hw_param_interval(params, |
| SNDRV_PCM_HW_PARAM_CHANNELS); |
| |
| /* PCM only supports mono output with 8khz sample rate */ |
| rate->min = rate->max = 8000; |
| channels->min = channels->max = 1; |
| |
| return 0; |
| } |
| static int msm8960_aux_pcm_get_gpios(void) |
| { |
| int ret = 0; |
| |
| pr_debug("%s\n", __func__); |
| |
| ret = gpio_request(GPIO_AUX_PCM_DOUT, "AUX PCM DOUT"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM DOUT", |
| __func__, GPIO_AUX_PCM_DOUT); |
| goto fail_dout; |
| } |
| |
| ret = gpio_request(GPIO_AUX_PCM_DIN, "AUX PCM DIN"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM DIN", |
| __func__, GPIO_AUX_PCM_DIN); |
| goto fail_din; |
| } |
| |
| ret = gpio_request(GPIO_AUX_PCM_SYNC, "AUX PCM SYNC"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM SYNC", |
| __func__, GPIO_AUX_PCM_SYNC); |
| goto fail_sync; |
| } |
| ret = gpio_request(GPIO_AUX_PCM_CLK, "AUX PCM CLK"); |
| if (ret < 0) { |
| pr_err("%s: Failed to request gpio(%d): AUX PCM CLK", |
| __func__, GPIO_AUX_PCM_CLK); |
| goto fail_clk; |
| } |
| |
| return 0; |
| |
| fail_clk: |
| gpio_free(GPIO_AUX_PCM_SYNC); |
| fail_sync: |
| gpio_free(GPIO_AUX_PCM_DIN); |
| fail_din: |
| gpio_free(GPIO_AUX_PCM_DOUT); |
| fail_dout: |
| |
| return ret; |
| } |
| |
| static int msm8960_aux_pcm_free_gpios(void) |
| { |
| gpio_free(GPIO_AUX_PCM_DIN); |
| gpio_free(GPIO_AUX_PCM_DOUT); |
| gpio_free(GPIO_AUX_PCM_SYNC); |
| gpio_free(GPIO_AUX_PCM_CLK); |
| |
| return 0; |
| } |
| static int msm8960_startup(struct snd_pcm_substream *substream) |
| { |
| pr_debug("%s(): substream = %s stream = %d\n", __func__, |
| substream->name, substream->stream); |
| return 0; |
| } |
| |
| static int msm8960_auxpcm_startup(struct snd_pcm_substream *substream) |
| { |
| int ret = 0; |
| |
| pr_debug("%s(): substream = %s\n", __func__, substream->name); |
| ret = msm8960_aux_pcm_get_gpios(); |
| if (ret < 0) { |
| pr_err("%s: Aux PCM GPIO request failed\n", __func__); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void msm8960_auxpcm_shutdown(struct snd_pcm_substream *substream) |
| { |
| |
| pr_debug("%s(): substream = %s\n", __func__, substream->name); |
| msm8960_aux_pcm_free_gpios(); |
| } |
| |
| static void msm8960_shutdown(struct snd_pcm_substream *substream) |
| { |
| pr_debug("%s(): substream = %s stream = %d\n", __func__, |
| substream->name, substream->stream); |
| } |
| |
| static struct snd_soc_ops msm8960_be_ops = { |
| .startup = msm8960_startup, |
| .shutdown = msm8960_shutdown, |
| }; |
| |
| static struct snd_soc_ops msm8960_auxpcm_be_ops = { |
| .startup = msm8960_auxpcm_startup, |
| .shutdown = msm8960_auxpcm_shutdown, |
| }; |
| |
| /* Digital audio interface glue - connects codec <---> CPU */ |
| static struct snd_soc_dai_link msm8960_dai[] = { |
| /* FrontEnd DAI Links */ |
| { |
| .name = "MSM8960 Media1", |
| .stream_name = "MultiMedia1", |
| .cpu_dai_name = "MultiMedia1", |
| .platform_name = "msm-pcm-dsp", |
| .dynamic = 1, |
| .dsp_link = &fe_media, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA1 |
| }, |
| { |
| .name = "MSM8960 Media2", |
| .stream_name = "MultiMedia2", |
| .cpu_dai_name = "MultiMedia2", |
| .platform_name = "msm-pcm-dsp", |
| .dynamic = 1, |
| .dsp_link = &fe_media, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA2, |
| }, |
| { |
| .name = "Circuit-Switch Voice", |
| .stream_name = "CS-Voice", |
| .cpu_dai_name = "CS-VOICE", |
| .platform_name = "msm-pcm-voice", |
| .dynamic = 1, |
| .dsp_link = &fe_media, |
| .be_id = MSM_FRONTEND_DAI_CS_VOICE, |
| .no_host_mode = SND_SOC_DAI_LINK_NO_HOST, |
| .ignore_suspend = 1, |
| }, |
| { |
| .name = "MSM VoIP", |
| .stream_name = "VoIP", |
| .cpu_dai_name = "VoIP", |
| .platform_name = "msm-voip-dsp", |
| .dynamic = 1, |
| .dsp_link = &fe_media, |
| .be_id = MSM_FRONTEND_DAI_VOIP, |
| }, |
| { |
| .name = "MSM8960 LPA", |
| .stream_name = "LPA", |
| .cpu_dai_name = "MultiMedia3", |
| .platform_name = "msm-pcm-lpa", |
| .dynamic = 1, |
| .dsp_link = &lpa_fe_media, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA3, |
| }, |
| /* Hostless PMC purpose */ |
| { |
| .name = "SLIMBUS_0 Hostless", |
| .stream_name = "SLIMBUS_0 Hostless", |
| .cpu_dai_name = "SLIMBUS0_HOSTLESS", |
| .platform_name = "msm-pcm-hostless", |
| .dynamic = 1, |
| .dsp_link = &slimbus0_hl_media, |
| .no_host_mode = SND_SOC_DAI_LINK_NO_HOST, |
| .ignore_suspend = 1, |
| /* .be_id = do not care */ |
| }, |
| { |
| .name = "INT_FM Hostless", |
| .stream_name = "INT_FM Hostless", |
| .cpu_dai_name = "INT_FM_HOSTLESS", |
| .platform_name = "msm-pcm-hostless", |
| .dynamic = 1, |
| .dsp_link = &int_fm_hl_media, |
| .no_host_mode = SND_SOC_DAI_LINK_NO_HOST, |
| .ignore_suspend = 1, |
| /* .be_id = do not care */ |
| }, |
| { |
| .name = "MSM AFE-PCM RX", |
| .stream_name = "AFE-PROXY RX", |
| .cpu_dai_name = "msm-dai-q6.241", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .platform_name = "msm-pcm-afe", |
| .ignore_suspend = 1, |
| }, |
| { |
| .name = "MSM AFE-PCM TX", |
| .stream_name = "AFE-PROXY TX", |
| .cpu_dai_name = "msm-dai-q6.240", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .platform_name = "msm-pcm-afe", |
| .ignore_suspend = 1, |
| }, |
| { |
| .name = "MSM8960 Compr", |
| .stream_name = "COMPR", |
| .cpu_dai_name = "MultiMedia4", |
| .platform_name = "msm-compr-dsp", |
| .dynamic = 1, |
| .dsp_link = &lpa_fe_media, |
| .be_id = MSM_FRONTEND_DAI_MULTIMEDIA4, |
| }, |
| /* Backend DAI Links */ |
| { |
| .name = LPASS_BE_SLIMBUS_0_RX, |
| .stream_name = "Slimbus Playback", |
| .cpu_dai_name = "msm-dai-q6.16384", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "tabla_codec", |
| .codec_dai_name = "tabla_rx1", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_SLIMBUS_0_RX, |
| .init = &msm8960_audrx_init, |
| .be_hw_params_fixup = msm8960_slim_0_rx_be_hw_params_fixup, |
| .ops = &msm8960_be_ops, |
| }, |
| { |
| .name = LPASS_BE_SLIMBUS_0_TX, |
| .stream_name = "Slimbus Capture", |
| .cpu_dai_name = "msm-dai-q6.16385", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "tabla_codec", |
| .codec_dai_name = "tabla_tx1", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_SLIMBUS_0_TX, |
| .be_hw_params_fixup = msm8960_slim_0_tx_be_hw_params_fixup, |
| .ops = &msm8960_be_ops, |
| }, |
| /* Backend BT/FM DAI Links */ |
| { |
| .name = LPASS_BE_INT_BT_SCO_RX, |
| .stream_name = "Internal BT-SCO Playback", |
| .cpu_dai_name = "msm-dai-q6.12288", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .init = &msm8960_btsco_init, |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_INT_BT_SCO_RX, |
| .be_hw_params_fixup = msm8960_btsco_be_hw_params_fixup, |
| }, |
| { |
| .name = LPASS_BE_INT_BT_SCO_TX, |
| .stream_name = "Internal BT-SCO Capture", |
| .cpu_dai_name = "msm-dai-q6.12289", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_INT_BT_SCO_TX, |
| .be_hw_params_fixup = msm8960_btsco_be_hw_params_fixup, |
| }, |
| { |
| .name = LPASS_BE_INT_FM_RX, |
| .stream_name = "Internal FM Playback", |
| .cpu_dai_name = "msm-dai-q6.12292", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_INT_FM_RX, |
| .be_hw_params_fixup = msm8960_be_hw_params_fixup, |
| }, |
| { |
| .name = LPASS_BE_INT_FM_TX, |
| .stream_name = "Internal FM Capture", |
| .cpu_dai_name = "msm-dai-q6.12293", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_INT_FM_TX, |
| .be_hw_params_fixup = msm8960_be_hw_params_fixup, |
| }, |
| /* HDMI BACK END DAI Link */ |
| { |
| .name = LPASS_BE_HDMI, |
| .stream_name = "HDMI Playback", |
| .cpu_dai_name = "msm-dai-q6.8", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .no_pcm = 1, |
| .no_codec = 1, |
| .be_id = MSM_BACKEND_DAI_HDMI_RX, |
| .be_hw_params_fixup = msm8960_be_hw_params_fixup, |
| }, |
| /* Backend AFE DAI Links */ |
| { |
| .name = LPASS_BE_AFE_PCM_RX, |
| .stream_name = "AFE Playback", |
| .cpu_dai_name = "msm-dai-q6.224", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .no_codec = 1, |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AFE_PCM_RX, |
| }, |
| { |
| .name = LPASS_BE_AFE_PCM_TX, |
| .stream_name = "AFE Capture", |
| .cpu_dai_name = "msm-dai-q6.225", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .no_codec = 1, |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AFE_PCM_TX, |
| }, |
| /* AUX PCM Backend DAI Links */ |
| { |
| .name = LPASS_BE_AUXPCM_RX, |
| .stream_name = "AUX PCM Playback", |
| .cpu_dai_name = "msm-dai-q6.2", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-rx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AUXPCM_RX, |
| .be_hw_params_fixup = msm8960_auxpcm_be_params_fixup, |
| .ops = &msm8960_auxpcm_be_ops, |
| }, |
| { |
| .name = LPASS_BE_AUXPCM_TX, |
| .stream_name = "AUX PCM Capture", |
| .cpu_dai_name = "msm-dai-q6.3", |
| .platform_name = "msm-pcm-routing", |
| .codec_name = "msm-stub-codec.1", |
| .codec_dai_name = "msm-stub-tx", |
| .no_pcm = 1, |
| .be_id = MSM_BACKEND_DAI_AUXPCM_TX, |
| .be_hw_params_fixup = msm8960_auxpcm_be_params_fixup, |
| }, |
| }; |
| |
| struct snd_soc_card snd_soc_card_msm8960 = { |
| .name = "msm8960-snd-card", |
| .dai_link = msm8960_dai, |
| .num_links = ARRAY_SIZE(msm8960_dai), |
| }; |
| |
| static struct platform_device *msm8960_snd_device; |
| |
| static int msm8960_configure_headset_mic_gpios(void) |
| { |
| int ret; |
| struct pm_gpio param = { |
| .direction = PM_GPIO_DIR_OUT, |
| .output_buffer = PM_GPIO_OUT_BUF_CMOS, |
| .output_value = 1, |
| .pull = PM_GPIO_PULL_NO, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_MED, |
| .function = PM_GPIO_FUNC_NORMAL, |
| }; |
| |
| ret = gpio_request(PM8921_GPIO_PM_TO_SYS(23), "AV_SWITCH"); |
| if (ret) { |
| pr_err("%s: Failed to request gpio %d\n", __func__, |
| PM8921_GPIO_PM_TO_SYS(23)); |
| return ret; |
| } |
| |
| ret = pm8xxx_gpio_config(PM8921_GPIO_PM_TO_SYS(23), ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure gpio %d\n", __func__, |
| PM8921_GPIO_PM_TO_SYS(23)); |
| else |
| gpio_direction_output(PM8921_GPIO_PM_TO_SYS(23), 0); |
| |
| ret = gpio_request(PM8921_GPIO_PM_TO_SYS(35), "US_EURO_SWITCH"); |
| if (ret) { |
| pr_err("%s: Failed to request gpio %d\n", __func__, |
| PM8921_GPIO_PM_TO_SYS(35)); |
| gpio_free(PM8921_GPIO_PM_TO_SYS(23)); |
| return ret; |
| } |
| ret = pm8xxx_gpio_config(PM8921_GPIO_PM_TO_SYS(35), ¶m); |
| if (ret) |
| pr_err("%s: Failed to configure gpio %d\n", __func__, |
| PM8921_GPIO_PM_TO_SYS(35)); |
| else |
| gpio_direction_output(PM8921_GPIO_PM_TO_SYS(35), 0); |
| |
| return 0; |
| } |
| static void msm8960_free_headset_mic_gpios(void) |
| { |
| if (msm8960_headset_gpios_configured) { |
| gpio_free(PM8921_GPIO_PM_TO_SYS(23)); |
| gpio_free(PM8921_GPIO_PM_TO_SYS(35)); |
| } |
| } |
| |
| static int __init msm8960_audio_init(void) |
| { |
| int ret; |
| |
| if (!cpu_is_msm8960()) { |
| pr_err("%s: Not the right machine type\n", __func__); |
| return -ENODEV ; |
| } |
| msm8960_snd_device = platform_device_alloc("soc-audio", 0); |
| if (!msm8960_snd_device) { |
| pr_err("Platform device allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(msm8960_snd_device, &snd_soc_card_msm8960); |
| ret = platform_device_add(msm8960_snd_device); |
| if (ret) { |
| platform_device_put(msm8960_snd_device); |
| return ret; |
| } |
| |
| if (msm8960_configure_headset_mic_gpios()) { |
| pr_err("%s Fail to configure headset mic gpios\n", __func__); |
| msm8960_headset_gpios_configured = 0; |
| } else |
| msm8960_headset_gpios_configured = 1; |
| |
| return ret; |
| |
| } |
| module_init(msm8960_audio_init); |
| |
| static void __exit msm8960_audio_exit(void) |
| { |
| if (!cpu_is_msm8960()) { |
| pr_err("%s: Not the right machine type\n", __func__); |
| return ; |
| } |
| msm8960_free_headset_mic_gpios(); |
| platform_device_unregister(msm8960_snd_device); |
| } |
| module_exit(msm8960_audio_exit); |
| |
| MODULE_DESCRIPTION("ALSA SoC MSM8960"); |
| MODULE_LICENSE("GPL v2"); |