| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/mm.h> |
| #include <linux/vmalloc.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/pci.h> |
| #include <asm/gpio.h> |
| #include <asm/addrspace.h> |
| |
| #include <lantiq_soc.h> |
| #include <lantiq_irq.h> |
| #include <lantiq_platform.h> |
| |
| #include "pci-lantiq.h" |
| |
| #define LTQ_PCI_CFG_BASE 0x17000000 |
| #define LTQ_PCI_CFG_SIZE 0x00008000 |
| #define LTQ_PCI_MEM_BASE 0x18000000 |
| #define LTQ_PCI_MEM_SIZE 0x02000000 |
| #define LTQ_PCI_IO_BASE 0x1AE00000 |
| #define LTQ_PCI_IO_SIZE 0x00200000 |
| |
| #define PCI_CR_FCI_ADDR_MAP0 0x00C0 |
| #define PCI_CR_FCI_ADDR_MAP1 0x00C4 |
| #define PCI_CR_FCI_ADDR_MAP2 0x00C8 |
| #define PCI_CR_FCI_ADDR_MAP3 0x00CC |
| #define PCI_CR_FCI_ADDR_MAP4 0x00D0 |
| #define PCI_CR_FCI_ADDR_MAP5 0x00D4 |
| #define PCI_CR_FCI_ADDR_MAP6 0x00D8 |
| #define PCI_CR_FCI_ADDR_MAP7 0x00DC |
| #define PCI_CR_CLK_CTRL 0x0000 |
| #define PCI_CR_PCI_MOD 0x0030 |
| #define PCI_CR_PC_ARB 0x0080 |
| #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 |
| #define PCI_CR_BAR11MASK 0x0044 |
| #define PCI_CR_BAR12MASK 0x0048 |
| #define PCI_CR_BAR13MASK 0x004C |
| #define PCI_CS_BASE_ADDR1 0x0010 |
| #define PCI_CR_PCI_ADDR_MAP11 0x0064 |
| #define PCI_CR_FCI_BURST_LENGTH 0x00E8 |
| #define PCI_CR_PCI_EOI 0x002C |
| #define PCI_CS_STS_CMD 0x0004 |
| |
| #define PCI_MASTER0_REQ_MASK_2BITS 8 |
| #define PCI_MASTER1_REQ_MASK_2BITS 10 |
| #define PCI_MASTER2_REQ_MASK_2BITS 12 |
| #define INTERNAL_ARB_ENABLE_BIT 0 |
| |
| #define LTQ_CGU_IFCCR 0x0018 |
| #define LTQ_CGU_PCICR 0x0034 |
| |
| #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) |
| #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) |
| |
| #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) |
| #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) |
| |
| struct ltq_pci_gpio_map { |
| int pin; |
| int alt0; |
| int alt1; |
| int dir; |
| char *name; |
| }; |
| |
| /* the pci core can make use of the following gpios */ |
| static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = { |
| { 0, 1, 0, 0, "pci-exin0" }, |
| { 1, 1, 0, 0, "pci-exin1" }, |
| { 2, 1, 0, 0, "pci-exin2" }, |
| { 39, 1, 0, 0, "pci-exin3" }, |
| { 10, 1, 0, 0, "pci-exin4" }, |
| { 9, 1, 0, 0, "pci-exin5" }, |
| { 30, 1, 0, 1, "pci-gnt1" }, |
| { 23, 1, 0, 1, "pci-gnt2" }, |
| { 19, 1, 0, 1, "pci-gnt3" }, |
| { 38, 1, 0, 1, "pci-gnt4" }, |
| { 29, 1, 0, 0, "pci-req1" }, |
| { 31, 1, 0, 0, "pci-req2" }, |
| { 3, 1, 0, 0, "pci-req3" }, |
| { 37, 1, 0, 0, "pci-req4" }, |
| }; |
| |
| __iomem void *ltq_pci_mapped_cfg; |
| static __iomem void *ltq_pci_membase; |
| |
| int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL; |
| |
| /* Since the PCI REQ pins can be reused for other functionality, make it |
| possible to exclude those from interpretation by the PCI controller */ |
| static int ltq_pci_req_mask = 0xf; |
| |
| static int *ltq_pci_irq_map; |
| |
| struct pci_ops ltq_pci_ops = { |
| .read = ltq_pci_read_config_dword, |
| .write = ltq_pci_write_config_dword |
| }; |
| |
| static struct resource pci_io_resource = { |
| .name = "pci io space", |
| .start = LTQ_PCI_IO_BASE, |
| .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1, |
| .flags = IORESOURCE_IO |
| }; |
| |
| static struct resource pci_mem_resource = { |
| .name = "pci memory space", |
| .start = LTQ_PCI_MEM_BASE, |
| .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1, |
| .flags = IORESOURCE_MEM |
| }; |
| |
| static struct pci_controller ltq_pci_controller = { |
| .pci_ops = <q_pci_ops, |
| .mem_resource = &pci_mem_resource, |
| .mem_offset = 0x00000000UL, |
| .io_resource = &pci_io_resource, |
| .io_offset = 0x00000000UL, |
| }; |
| |
| int pcibios_plat_dev_init(struct pci_dev *dev) |
| { |
| if (ltqpci_plat_dev_init) |
| return ltqpci_plat_dev_init(dev); |
| |
| return 0; |
| } |
| |
| static u32 ltq_calc_bar11mask(void) |
| { |
| u32 mem, bar11mask; |
| |
| /* BAR11MASK value depends on available memory on system. */ |
| mem = num_physpages * PAGE_SIZE; |
| bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; |
| |
| return bar11mask; |
| } |
| |
| static void ltq_pci_setup_gpio(int gpio) |
| { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) { |
| if (gpio & (1 << i)) { |
| ltq_gpio_request(ltq_pci_gpio_map[i].pin, |
| ltq_pci_gpio_map[i].alt0, |
| ltq_pci_gpio_map[i].alt1, |
| ltq_pci_gpio_map[i].dir, |
| ltq_pci_gpio_map[i].name); |
| } |
| } |
| ltq_gpio_request(21, 0, 0, 1, "pci-reset"); |
| ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK; |
| } |
| |
| static int __devinit ltq_pci_startup(struct ltq_pci_data *conf) |
| { |
| u32 temp_buffer; |
| |
| /* set clock to 33Mhz */ |
| ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR); |
| ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR); |
| |
| /* external or internal clock ? */ |
| if (conf->clock) { |
| ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16), |
| LTQ_CGU_IFCCR); |
| ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR); |
| } else { |
| ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16), |
| LTQ_CGU_IFCCR); |
| ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR); |
| } |
| |
| /* setup pci clock and gpis used by pci */ |
| ltq_pci_setup_gpio(conf->gpio); |
| |
| /* enable auto-switching between PCI and EBU */ |
| ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); |
| |
| /* busy, i.e. configuration is not done, PCI access has to be retried */ |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); |
| wmb(); |
| /* BUS Master/IO/MEM access */ |
| ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); |
| |
| /* enable external 2 PCI masters */ |
| temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); |
| temp_buffer &= (~(ltq_pci_req_mask << 16)); |
| /* enable internal arbiter */ |
| temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); |
| /* enable internal PCI master reqest */ |
| temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); |
| |
| /* enable EBU request */ |
| temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); |
| |
| /* enable all external masters request */ |
| temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); |
| ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); |
| wmb(); |
| |
| /* setup BAR memory regions */ |
| ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); |
| ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); |
| ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); |
| ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); |
| ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); |
| ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); |
| ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); |
| ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); |
| ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); |
| ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); |
| ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); |
| ltq_pci_w32(0, PCI_CS_BASE_ADDR1); |
| /* both TX and RX endian swap are enabled */ |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); |
| wmb(); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, |
| PCI_CR_BAR12MASK); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, |
| PCI_CR_BAR13MASK); |
| /*use 8 dw burst length */ |
| ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); |
| ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); |
| wmb(); |
| |
| /* setup irq line */ |
| ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); |
| ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); |
| |
| /* toggle reset pin */ |
| __gpio_set_value(21, 0); |
| wmb(); |
| mdelay(1); |
| __gpio_set_value(21, 1); |
| return 0; |
| } |
| |
| int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| if (ltq_pci_irq_map[slot]) |
| return ltq_pci_irq_map[slot]; |
| printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n", |
| slot); |
| |
| return 0; |
| } |
| |
| static int __devinit ltq_pci_probe(struct platform_device *pdev) |
| { |
| struct ltq_pci_data *ltq_pci_data = |
| (struct ltq_pci_data *) pdev->dev.platform_data; |
| pci_probe_only = 0; |
| ltq_pci_irq_map = ltq_pci_data->irq; |
| ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE); |
| ltq_pci_mapped_cfg = |
| ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE); |
| ltq_pci_controller.io_map_base = |
| (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1); |
| ltq_pci_startup(ltq_pci_data); |
| register_pci_controller(<q_pci_controller); |
| |
| return 0; |
| } |
| |
| static struct platform_driver |
| ltq_pci_driver = { |
| .probe = ltq_pci_probe, |
| .driver = { |
| .name = "ltq_pci", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| int __init pcibios_init(void) |
| { |
| int ret = platform_driver_register(<q_pci_driver); |
| if (ret) |
| printk(KERN_INFO "ltq_pci: Error registering platfom driver!"); |
| return ret; |
| } |
| |
| arch_initcall(pcibios_init); |